attach_11_P6575.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances

Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional………..…….+/- 1/32 Decimal……….………..+/- .010 Angular…………+/- ½ degrees

APPLICABILITY

INTERIM USE OF THIS MEO IS AUTHORIZED UNTIL

AFFECTED DOCUMENT IS UPDATED.

CSI Critical Characteristic Affected?

Impact Statement Attached:

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

DOCUMENT CHANGE IS REQUIRED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT CHANGE OR

REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP

NO.

PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGE MUST BE GIVEN)

MED FORM 15-DEC-09 1401-R-E

P6575 Sep 1, 2011 1

Addition of MIL-PRF-680 as Alternative Cleaner for Vacco AI Valve

NO

✔ YES

DMWR 55-2995-231 DATED 15 May 1983

T700I DAX

TTS 101478

To allow the use of MIL-PRF-680 as shown in this MEO

Gabriel Alaniz Mike Vourcos Steve Noll

3-33

3-33

3-33

C-4

3-18.a.1

3-18.b.

3-18.c.

Add the following paragraph:

"a.1 Alternate method for cleaning disassembled metallic parts. Place disassembled parts in a basket and wash in a cleaning tank using cleaning solvent ( Item 35, Appendix C)

After washing off any debris or dirt on parts, immerse basket in cleaning solvent(Item 35, Appendix C) for one to two minutes. Remove basket from cleaner and allow parts to air dry. Using low pressure compressed air, blow any accumulated liquid from holes and orifices. "

Change "same solvent" to "Isopropyl Alcohol, Item 27.1, Appendix C)"

Change "solvent" to "Isopropyl Alcohol, Item 27.1, Appendix C)"

Add new Item "35", NSN "6850-00-274-5421", Description "Solvent, Dry Cleaning, MIL-PRF-680", UM "GL"

RDMR-AEM

MEMORANDUM FOR RECORD:

SUBJECT: Impact of AED Maintenance Engineering Order (MEO) on maintenance using , dated , affecting system:

1. Enclosed MEO will be issued by this office and is provided as part of our Technical Data user support mission. This MEO may impact maintenance contracts or repair parts acquisition decisions.

2. OVERALL IMPACT:

3. CLASSIFICATION:

New / Revised Procedure / Process Illustrated Parts Breakdown (IPB) Change

Technical Requirement Clarification Repairable Bill of Materials (RBOM) Impact

Suggestion Study / Test Results Critical Safety Item (CSI) Review

Parts Marking Implementation / Update Environmental Review

MEO Review (Chg. / Rev. Driven) Other

4. CRITICAL CHARACTERISTIC(S) AFFECTED:

Dimension / Tolerance Finish / Material Process / Procedure None

5. READINESS IMPACT:

Testing Required Special Tooling Special Process

Part / Material Logistics Impact Inspection(s) Required None

6. MATERIAL IMPACT:

More Less None Unknown Cost / Usage

Labor / Processing Parts / Materials Affected:

7. COMMENTS:

8. Point of contact for this action is

DMWR 55-2995-231

P6575

P6575

15MAY 1983 T700I

No Significant Airworthiness Impact-Implement per standard procedures

1349 requested approval to use MIL-PRF-680. Idea should be included in DMWR so MEO was created rather than simply approving 1379.

Gabriel Alaniz, gerbo.alaniz@us.army.mil, 361-961-4255

ALANIZ.GABRIEL.AL

BERTO.1279200248

Digitally signed by

ALANIZ.GABRIEL.ALBERTO.1279200248

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=ALANIZ.GABRIEL.ALBERTO.1279200248 Date: 2011.08.30 15:18:07 -05'00'