attach_03_B1173.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 15-DEC-09 1401-R-E

B 1173 May 23, 2013 1

(T700/T701/T401/T401C/T701C/T701D) AISBV

High Potential Dielectric Breakdown Requirements Updates

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

YES

YES

T700 DAX

DMWR 55-2995-231 dtd 15 May 1983 ATP 73340ATP4 Rev AD

TTS 121727

DOCUMENT CHANGE IS REQUIRED Mil-Std-202, Method 301

To update parameters for test. Testing at high voltage will cause degradation of the asset. Also corrects current limit, per OEM input.

BONHAM.ROBI

N.L.1229254100

Digitally signed by

BONHAM.ROBIN.L.1229254100

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=BONHAM.ROBIN.L.1229254100 Date: 2013.05.23 10:25:48 -05'00'

GONZALEZ.JAC

OB.A.145582119

Digitally signed by

GONZALEZ.JACOB.A.1455821190

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=GONZALEZ.JACOB.A.1455821190 Date: 2013.05.23 10:35:07 -05'00'

Jacob Gonzalez

HORN.REINHOL

D.J.1087783495

Digitally signed by

HORN.REINHOLD.J.1087783495

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=HORN.REINHOLD.J.1087783495 Date: 2013.05.23 10:52:42 -05'00'

Robin L. Bonham Reinhold J. Horn PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

4-20

4-20

4-23.a.

4-23.b.

CHANGE as follows:

"a. With leads connected as described in paragraph 4-22, slowly increase voltage to 500 Vrms, 60 Hz, and hold for 5 to 10 seconds. If an electrical component is replaced, or malfunction is suspected,increase to 1000 Vrms."

CHANGE as follows:

"b. Leakage current shall not exceed 5 milliamperes and shall not fluctuate."

Formatted Cont. Sheet

6������ 78��

�/�&��� �+�&�+��������&�����9%�&�������������������;< �����������1���= ���������)����9%�&���/����� �,��

>)� ?���77���@� Airworthiness/Readiness Impact – Implement as soon as possible

�����������������+���/���&&;���!���&&��������B����*����������&���!��!������!%��&�

D)� ���&��"&#��� �F�������" /��I��**��/������*'#��

�+;��1�&�!�@����!%��;@����&&�

���/����*���9%��������

@���&����I�������*����������;��!����

�� ���1��+�" /�);��1)����1��#�

������*�@����&&���9%���!�

�����9%�&��

�**%&�����!�@���&�����I!�+��

��#���1��+�

��1���������*���1��+�

�@���9%�&��

�F���%������

���*!���9%�&��

J)� /��������&���"&#��������!K� L)� @� �� /��I��**��/������*'#��

����� 7�&&� ���� ��I��+��

� � � � 7�,��;@����&&����

� � � � ��&�������9%���!�

� � � � ������*����*������9%���!�

� � � � ��&�������"&#���9%���!�

M)�

O)� @���������������������/�&���������&��

B 1173 DMWR 55-2995-231 dtd 15 May 1983 T700

YES

To update parameters for test. Testing at high voltage will cause degradation of the asset. Also corrects current limit, per OEM input. This MEO has been Airworthiness approved by RDEC.

Robin L. Bonham

BONHAM.R

OBIN.L.1229

254100

Digitally signed by

BONHAM.ROBIN.L.1229254100

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=BONHAM.ROBIN.L.12292541 Date: 2013.05.23 10:26:36 -05'00'