Attachment 0015 -- Technical Publications.docx

DOCX document 68 KB Posted

Attached to
Sole Source for Bradley Fighting Vehicle System (BFVS) Family of Vehicles (FOV), Multiple Launch Rocket System (MLRS) Carrier System Technical Support (STS) and Sustainment System Technical Support (SSTS) Services
Solicitation number
W56HZV21R0195
Issued by

About this file

Written by GovTribe AI ·

This is a sole source solicitation from the Department of the Army Materiel Command seeking Systems Technical Support (STS) and Sustainment Systems Technical Support (SSTS) services for the Bradley Fighting Vehicle System (BFVS) Family of Vehicles and the Multiple Launch Rocket System (MLRS) Carrier. The contractor shall provide program management, logistics support, engineering, product assurance and field service support for the vehicle systems as an independent contractor. Efforts include modifications, changes, and improvements to the vehicle systems and subsystems.

View the file

Other files

File Type Posted
W56HZV-21-R-0195 Amendment 0001 RFP for BFV STS.pdf PDF
BFV MLRS STS J and A.pdf PDF
Attachment 0019 -- ATPD 2232.pdf PDF
Attachment 0013 -- IUID Marking Activity Val Ver w Raw Scan.xlsx XLSX spreadsheet
Attachment 0018 -- Incoming Transaction Format.docx DOCX document
Attachment 0014 -- IUID QA Guide.docx DOCX document
Attachment 0003 -- Contract Performance Report Sample.xlsx XLSX spreadsheet
Attachment 0020 -- Preparation Instructions Shipment and Storage.docx DOCX document
Attachment 0005 -- Resource Distribution Table.xlsx XLSX spreadsheet
Attachment 0007 -- Request for Use of Prohibited Materials.docx DOCX document
Attachment 0010 -- LMI Data Worksheet Instructions - Provisioning Data Requirements.docx DOCX document
Attachment 0002 -- Assertion of Restrictions.xlsx XLSX spreadsheet
Attachment 0016 -- Copyright Release Letter Template.docx DOCX document
Attachment 0017 -- LPD Coded Data Products Packaging.docx DOCX document
Attachment 0025 -- Small Business Subcontracting Plan (Placeholder).docx DOCX document
Attachment 0012 -- TACOM-RRAD Sample Data Plate.pdf PDF
Attachment 0021 -- Revisions and Exceptions.docx DOCX document
Attachment 0008 -- Level of Repair Analysis.docx DOCX document
Attachment 0004 -- Cost and Software Data Reporting Plan.xlsx XLSX spreadsheet
Attachment 0009 -- LMI Data Worksheet Form - Provisioning Data Requirements.pdf PDF
Attachment 0022 -- NDC Personal Information Requirements.docx DOCX document
Attachment 0006 -- TDP Options Worksheet.pdf PDF
Attachment 0011 -- Provisioning Requirements Statement.docx DOCX document
Attachment 0001 -- GFP.xlsx XLSX spreadsheet
W56HZV21R0195 RFP for BFV STS Services.pdf PDF
Show all 25

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

TABLE A-XXI TM REQUIREMENTS MATRIX

IETM

W56HZV-13-R-0189

Attachment 0010, Technical Publications

1. Publication Clarifications

a. All illustrations shall be line drawings unless prior approval is received from the Government for specific applications on a case-by-case basis. Illustrations in operation and maintenance procedures shall be isometric and provide a view as seen by user. Illustrations shall appear on same or facing page as applicable text; quantity and type of illustration shall allow user to locate items and operate and maintain equipment in an accurate and efficient manner.

b. Incorporate appropriate lubrication instructions into the Operator and Field-Level Preventive Maintenance Checks and Services (PMCS) at the applicable hard-time intervals IAW MIL-STD-40051. Include Army Oil Analysis Program (AOAP) instructions, if applicable, and any initial, onetime, or warranty related requirements.

c. Develop and update a Maintenance Allocation Chart (MAC) per MIL-STD-40051. The MAC shall be in assembly and subassembly sequence. Contractor shall update the MAC throughout the performance period of the contract, including results of your analysis, vehicle testing, validation, verification and review manuals. Contractor shall perform an analysis to identify the extent of repair for each potentially repairable item and recommend the maintenance level to perform the work within the Army Maintenance System (AR 750-1). Variables such as item price, parts prices, failure rates of the repairable item, and piece parts, labor costs, and the cost of special tools and equipment shall be considered.

d. Prepare Components of End Item (COEI) lists, Basic Issue Items (BII) lists, Additional Authorization Lists (AAL) and References lists in accordance with MIL-STD-40051.

2. Additional Publication Quality Assurance

a. Verification is a process in which Government reserves the right to perform reviews and testing for accuracy and usability at Government discretion prior to acceptance of the final deliveries. Verification is the Government’s hands-on performance check of tasks and deliveries to check the adequacy of Contractor’s preparation and Validation efforts. Verification will be held after the Contractor delivers the Draft Equipment Publication (DEP) Electronic Technical Manuals (ETM) and Interactive Electronic Technical Manuals (IETM). The Government reserves the right to combine its Verification with the Contractor’s Validation. The Government’s Verification will include a review of the ETM and IETM.

b. Government will evaluate the ETM and IETM for compliance with contract requirements to determine acceptance of the deliveries. All information in the ETM and IETM must be presented in such a way that it can be easily identified and found, read and understood, and includes illustration support where the Government deems necessary. If Government finds errors or deficiencies in the Contractor’s deliveries during Government reviews or testing, Contractor shall correct them at no additional cost to the Government.

3. Government Furnished Information (GFI)

a. Government will provide the following: ETM and IETM numbers, NMWR numbers, end item National Stock Numbers (if available), official nomenclatures, and distribution statements.

b. Government will furnish updated Army regulations and Technical Manual numbers and titles to be included in the References portion of the ETM and IETM.

TM Content
10
23

23&P 24&P

MILSTD40051-2

Reference Element Name

FRONT MATTER
R
R
R
5.2.1
<paper.frnt>
Front cover
R
R
R
5.2.1.1
<frntcover>

(MC) Promulgation letter

5.2.1.2
<promulgation>

Warning summary

5.2.1.3
<warnsum>

Change transmittal page

5.2.1.4
<chgsheet>

List of effective pages / work packages (Excluding pocket TMs and publications with less than eight pages)

R
R
R
5.2.1.5
<loepwp>
Title block page
R
R
R
5.2.1.6
<titleblk>
Table of contents
R
R
R
5.2.1.8
<contents>
How to use this manual
R
R
R
5.2.1.9
<howtouse>

CHAPTER 1.

GENERAL INFORMATION, Equipment DESCRIPTION AND THEORY OF OPERATION

R
R
R
B.5.1
<gim>
GENERAL INFORMATION WORK PACKAGE
R
R
R
B.5.2
<ginfowp>
Scope
R
R
R
B.5.2.3
<scope>
Maintenance forms, records, and reports
R
R
R
B.5.2.4
<mfrr>
Reporting equipment improvement recommendations (EIR)
R
R
R
B.5.2.5
<eir>
Hand receipt (HR) manuals
R
R
R
B.5.2.6
<handreceipt>
Corrosion prevention and control (CPC)
R
R
R
B.5.2.7
<cpcdata>
Ozone depleting substances (ODS)
R
R
R
B.5.2.8
<odsdata>
Destruction of Army materiel to prevent enemy use
R
R
R
B.5.2.8
<destructmat>
Preparation for storage or shipment
R
R
R
B.5.2.10
<pssref>

Warranty information

B.5.2.11
<wrntyref>

Nomenclature cross-reference list

B.5.2.12
<nomenreflist>
List of abbreviations/acronyms
R
R
R
B.5.2.13
<loa>
Quality of material
P
B.5.2.15
<qual.mat.info>

Safety, care, and handling

B.5.2.16
<sftyinfo>
Nuclear hardness
R
R
R
B.5.2.17
<hcp>
Calibration
R
R
R
B.5.2.18
<calref>
Supporting information for repair parts, special tools, TMDE, and support equipment
P
R
R
B.5.2.25
<supdata>

Copyright credit line

B.5.2.26
<copyrt>
EQUIPMENT DESCRIPTION AND DATA WORK PACKAGE
R
R
R
B.5.3
<descwp>
Equipment characteristics, capabilities, and features
R
R
R
B.5.3.3
<eqpinfo>
Location and description of major components
R
R
R
B.5.3.4
<locdesc>

Differences between models

B.5.3.5
<eqpdiff>
Equipment data
R
R
R
B.5.3.6
<eqpdata>
THEORY OF OPERATION WORK PACKAGE
R
R
R
B.5.4
<thrywp>

CHAPTER X.

OPERATOR INSTRUCTIONS

R

C.5.1
<opim>
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS WORK PACKAGE
R
C.5.2.3
<ctrlindwp>
OPERATION UNDER USUAL CONDITIONS WORK PACKAGE
R
C.5.2.4
<opusualwp>

Security measures for electronic data

C.5.2.4.3
<secref>

Siting requirements

C.5.2.4.4
<site>

Shelter requirements

C.5.2.4.5
<shelter>

Assembly and preparation for use

C.5.2.4.6
<prepforuse>

Initial adjustments, before use and selftest

C.5.2.4.7
<initial>
Operating procedures
R
C.5.2.4.8
<oper>

Decals and instruction plates

C.5.2.4.8.2
<instructplt>

Operating auxiliary equipment

C.5.2.4.9
<operaux>

Preparation for movement

C.5.2.4.10
<prepmove>
OPERATION UNDER UNUSUAL CONDITIONS WORK PACKAGE
R
C.5.2.5
<opunuwp>

Security measures for electronic data

C.5.2.5.3.1
<secref>
Unusual environment / weather
R
C.5.2.5.3.2
<unusualenv>

Fording and swimming

C.5.2.5.3.3
<fording>

Interim nuclear, biological, and chemical (NBC) decontamination procedures

C.5.2.5.3.4
<decon>

Jamming and electronic countermeasures (ECM) procedures

C.5.2.5.3.5
<ecm>

Degraded operation procedures

C.5.2.5.3.6
<degraded>
Emergency WORK PACKAGE
R
C.5.2.6
<emergencywp>
STOWAGE AND DECAL / DATA PLATE GUIDE WORK PACKAGE
R
C.5.2.7
<stowagewp>
ONVEHICLE EQUIPMENT LOADING PLAN WORK PACKAGE
R
C.5.2.8
<eqploadwp>

CHAPTER X.

TROUBLESHOOTING

MASTER INDEX

R
R
R
D.5.1

D.5.4.2 <tim> <masterindexcategory>

TROUBLESHOOTING INDEX WORK PACKAGE
R
R
R
D.5.4.4
<tsindxwp>

CHAPTER X.

TROUBLESHOOTING PROCEDURES

NOTE

The notation (*) indicates that, if required, at least one of the these content items shall be included

R
R
R
D.5.1

D.5.4.2 <tim> <troublecategory>

TROUBLESHOOTING INDEX WORK PACKAGE
R
R
R
D.5.5.5
<tsindxwp>

*OPERATIONAL CHECKOUT WORK PACKAGES

D.5.5.8.3
<opcheckwp>

*TROUBLESHOOTING PROCEDURES WORK PACKAGES

D.5.5.8.4
<tswp>

*COMBINED OPERATIONAL CHECKOUT AND TROUBLESHOOTING PROCEDURES WORK PACKAGES

D.5.5.8.5
<opchecktswp>

CHAPTER X.

PMCS

MAINTENANCE INSTRUCTIONS

NOTE

PMCS is required as a minimum in one maintenance chapter

R
R
R
E.5.2

E.5.2.1 <mim> <pmcscategory>

PMCS INTRODUCTION WORK PACKAGE
R
R
R
E.5.3.4.1
<pmcsintrowp>
PMCS, INCLUDING LUBRICATION INSTRUCTIONS, WORK PACKAGE
R
R
R
E.5.3.4.2
<pmcswp>

CHAPTER X.

MAINTENANCE INSTRUCTIONS

NOTE

PMCS is required as a minimum in one maintenance chapter

R
R
R
E.5.2

E.5.2.2 E.5.2.3 <mim> <maintenancepmcscategory> <maintenancecategory>

SERVICE UPON RECEIPT WORK PACKAGE
R
R
R
E.5.3.2
<surwp>
Siting
R
E.5.3.2.3.1
<siting>
Shelter requirements
R
E.5.3.2.3.2
<shltr>
Service upon receipt of materiel
R
R
R
E.5.3.2.3.3
<surmat>
Installation instructions
R
R
R
E.5.3.2.3.4
<install>
Preliminary servicing of equipment
R
E.5.3.2.3.5
<preserv>
Preliminary checks and adjustment of equipment
R
E.5.3.2.3.6
<prechkadj>
Preliminary calibration of equipment
R
E.5.3.2.3.7
<precal>
Circuit alignment
R
E.5.3.2.3.8
<calign>
Ammunition markings
R
E.5.3.2.3.9.1
<ammo.markings>
Classification of defects
R
E.5.3.2.3.9.2
<ammo.defect>
Ammunition handling
R
E.5.3.2.3.9.3
<ammo.handling>
Procedures to activate ammunition
R
E.5.3.2.3.9.4
<arm>
Other service upon receipt task
R
E.5.3.2.3.10
<other.surtsk>
Follow-on maintenance
R
E.5.3.2.3.11
<followon.maintsk>
EQUIPMENT / USER FITTING INSTRUCTIONS WORK PACKAGE (personal use equipment)
P
E.5.3.3
<perseqpwp>
PMCS INTRODUCTION WORK PACKAGE
R
R
R
E.5.3.4.1
<pmcsintrowp>
PMCS, INCLUDING LUBRICATION INSTRUCTIONS, WORK PACKAGE
R
R
R
E.5.3.4.2
<pmcswp>

MAINTENANCE WORK PACKAGES

NOTE

As applicable, the following maintenance tasks shall be presented in the general order listed below:

R
R
R
E.5.3.5
<maintwp>

Servicing

E.5.3.5.3.3
<service>

Ground handling

E.5.3.5.3.4
<groundtsk>

Inspection of installed items

E.5.3.5.3.5
<inspinstitm>

Removal

E.5.3.5.3.6
<remove>

Disassembly

E.5.3.5.3.7
<disassem>

Cleaning

E.5.3.5.3.8
<clean>

Inspectionacceptance and rejection criteria

E.5.3.5.3.9
<acptrejinsp>

Nondestructive testing inspection (NDTI)

E.5.3.5.3.10
<ndti>

Repair or replacement

E.5.3.5.3.11
<repairrplc>

Alignment

E.5.3.5.3.12
<align>

Painting

E.5.3.5.3.13
<paint>

Lubrication

E.5.3.5.3.14
<lube>

Assembly

E.5.3.5.3.15
<assem>

Test and inspection

E.5.3.5.3.16
<testinspect>

Installation

E.5.3.5.3.17
<install>

Adjustment

E.5.3.5.3.18
<adjust>

Calibration

E.5.3.5.3.19
<calibration>

Radio interference suppression

E.5.3.5.3.20
<ris>

Placing in service

E.5.3.5.3.21
<pis>

Testing

E.5.3.5.3.22
<testpass>

Preparation for storage or shipment

E.5.3.5.3.25
<pss>

Classification of defects

E.5.3.5.3.26
<ammo.defect>

Handling ammunition

E.5.3.5.3.27
<ammo.handling>

Ammunition markings

E.5.3.5.3.28
<ammo.markings>

Procedures for ammunition activation

E.5.3.5.3.29
<arm>

Additional maintenance task

E.5.3.5.3.30
<other.maintsk>

Follow-on maintenance

E.5.3.5.3.31
<followon.maintsk>
GENERAL MAINTENANCE WORK PACKAGE
R
R
R
E.5.3.6
<maintwp>
LUBRICATION INSTRUCTIONS WORK PACKAGE
R
R
R
E.5.3.7
<lubewp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE
P
R
R
Error! Reference source not found.
<manuwp>
TORQUE LIMITS WORK PACKAGE
P
R
R
E.5.3.10
<torquewp>
WIRING DIAGRAMS WORK PACKAGE
P
R
R
E.5.3.11
<wiringwp>

CHAPTER X.

AUXILIARY EQUIPMENT

MAINTENANCE INSTRUCTIONS

R
R
R
E.5.2

E.5.2.6 <mim> <auxiliarycategory>

AUXILIARY EQUIPMENT MAINTENANCE WORK PACKAGE
R
R
R
E.5.3.13
<auxeqpwp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE
P
R
R
Error! Reference source not found.
<manuwp>
TORQUE LIMITS WORK PACKAGE
P
R
R
E.5.3.10
<torquewp>
WIRING DIAGRAMS WORK PACKAGE
P
R
R
E.5.3.11
<wiringwp>

CHAPTER X.

AMMUNITION

MAINTENANCE INSTRUCTIONS

E.5.2 E.5.2.7 <mim> <ammunitioncategory>

AMMUNITION MAINTENANCE WORK PACKAGE

E.5.3.14.1
<ammowp>

AMMUNITION MARKING INFORMATION WORK PACKAGE

E.5.3.14.2
<ammo.markingwp>

FOREIGN AMMUNITION (NATO) WORK PACKAGE

E.5.3.14.3
<natowp>

CHAPTER X.

PARTS information (-10, -23, -24) (-23&P, -24&p)

P

R

R

F.5.3.2
<pim>
Introduction work package
P
R
R
F.5.3.5
<introwp>
Repair parts list work package
P
R
R
F.5.3.6
<plwp>
Repair parts for special tools work package
P
R
R
F.5.3.7
<stl_partswp>
Kit parts list work package
P
R
R
F.5.3.8
<kitswp>
bulk Item Work Package
P
R
R
F.5.3.9
<bulk_itemswp>
Special tools list work package
P
R
R
F.5.3.10
<stlwp>
NSN index work package
P
R
R
F.5.3.11.1
<nsnindxwp>
P/N index work package
P
R
R
F.5.3.11.2
<pnindxwp>
Reference designator index work package
P
F.5.3.11.3
<refdesindxwp>

CHAPTER X.

DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE

R
R
R
Appendix H

<destruct-ginfowp> <destruct-materialwp>

GENERAL INFORMATION WORK PACKAGE
R
R
R
H.5.1
<destruct-ginfowp>
DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE WORK PACKAGE
R
R
R
H.5.2
<destruct-materialwp>
battle damage assessment and repair (bdar) information
R
R
R
Appendix I
general information work package
R
R
R
I.5.2.1
<bdar-geninfo>
battle damage ASSESSMENT work packageS
R
R
R
I.5.2.2
<damage-assesswp>
repair work packages
R
R
R
I.5.2.3
<genrepairwp>
special/fabricated tools work package
R
R
R
I.5.2.5
<bdartoolswp>
substitute matrials/parts work package
R
R
R
I.5.2.7
<substitute-matwp>

CHAPTER X.

SUPPORTING INFORMATION

NOTE

Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.

R
R
R
G.5.1
<sim>
REFERENCES WORK PACKAGE
R
R
R
G.5.2
<refwp>
INTRODUCTION FOR STANDARD TWO-LEVEL OR AVIATION Two-level maintenance mac WORK PACKAGE
P
R
R
G.5.3.13

G.5.3.3A <macintrowp>

MAC WORK PACKAGE (STANDARD TWO-LEVEL OR AVIATION Two-level)
P
R
R
G.5.3.4
<macwp>
COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS WORK PACKAGE
R
R
R
G.5.4
<coeibiiwp>

ADDITIONAL AUTHORIZATION LIST (AAL) WORK PACKAGE

G.5.5
<aalwp>
EXPENDABLE AND DURABLE ITEMS LIST WORK PACKAGE
R
R
R
G.5.6
<explistwp>
TOOL IDENTIFICATION LIST WORK PACKAGE
P
R
R
G.5.7
<toolidwp>
MANDATORY REPLACEMENT PARTS WORK PACKAGE
P
R
R
G.5.8
<mrplwp>

CRITICAL SAFETY ITEMS AND FLIGHT SAFETY CRITICAL AIRCRAFT PARTS WORK PACKAGE

G.5.9
<csi.fscap.wp>
SUPPORT ITEMS WORK PACKAGE
R
R
R
G.5.10
<supitemwp>
ADDITIONAL SUPPORTING WORK PACKAGES
R
R
R
G.5.11
<genwp>
REAR MATTER
R
R
R
5.2.2
<rear>

Glossary

5.2.2.1
<glossary>
Alphabetical index
R
R
R
5.2.2.2
<aindx>
DA Form 2028
R
R
R
5.2.2.3
<da2028>
Authentication page
R
R
R
5.2.2.4
<authent>
Foldout pages
P
R
R
5.2.2.5
<foldsect>
Back cover
R
R
R
5.2.2.7
<back>

Legend

RRequired
PProhibited
ShadedAs Required

TABLE A-II TM REQUIREMENTS MATRIX

Page-Based ETM

MIL-STD-40051-2 TM Requirements Matrix – Table A-II 8

TABLE A-XVII. Functionality Matrix

Complexity Factor
Category
Functionality
Reqmt
Paragraph Reference
Linear
Non-Linear
1
1
Ac
Suspend and Restart
R
A.5.2.3.1.1
3
3
Ac
Login
R
A.5.2.3.1.2
2
2
An
Global Data Annotation
R
A.5.2.3.2.1
2
2
An
Local Data Annotation
R
A.5.2.3.2.2
1
1
An
Personal Annotation
O
A.5.2.3.2.3
3
3
An
Redlining Graphics

A.5.2.3.2.4

2
2
An
Redlining Text

A.5.2.3.2.5

1
1
DD
CD-ROM
R
A.5.2.3.3.1
1
1
DD
DVD
R
A.5.2.3.3.2
2
2
DD
Network Distribution
R
A.5.2.3.3.3
1
1
DP
Diagnostics - User Determined Entry to IETM
R
A.5.2.3.4.1
2
2
DP
Diagnostics - Software Driven Entry to IETM
R
A.5.2.3.4.2
NA
5
DP
Dynamic Diagnostics
R
A.5.2.3.4.3
NA
5
DP
Prognostics
R
A.5.2.3.4.4
4
4
DP
System Simulation

A.5.2.3.4.5

4
4
DP
Wire/Fluid System Tracing
R
A.5.2.3.4.6
3
3
E
Deficiency Report
R
A.5.2.3.5.1
NA
5
E
Knowledge Management
R
A.5.2.3.5.2
3
3
E
Maintenance Data Collection
R
A.5.2.3.5.3
3
3
E
Operator Debriefing

A.5.2.3.5.4

3
3
E
Parts Ordering
R
A.5.2.3.5.5
3
3
E
Resource Scheduling

A.5.2.3.5.6

2
2
E
Supporting Technical Data
R
A.5.2.3.5.7
4
4
G
3D Modeling

A.5.2.3.6.1

2
2
G
Assembly/Disassembly
R
A.5.2.3.6.2
1
1
G
Locator Graphics
O
A.5.2.3.6.3
1
1
G
Pan, Zoom, Expand, Magnify
R
A.5.2.3.6.4
2
2
L
Hot Reference
R
A.5.2.3.7.1
3
3
L
Hotspotting
R
A.5.2.3.7.2
1
1
L
Internal References
R
A.5.2.3.7.3
2
2
L
Link To Separate Parts Data
R
A.5.2.3.7.4
1
1
L
Table of Contents
R
A.5.2.3.7.5
2
2
N
Audit Trail

A.5.2.3.8.1

3
3
N
Dialog-driven interaction

A.5.2.3.8.2

1
1
N
Exit
R
A.5.2.3.8.3
2
1
N
Filter by Configuration
O
A.5.2.3.8.4
2
1
N
Filter by Model Series
R
A.5.2.3.8.5
2
1
N
Filter by Modification
O
A.5.2.3.8.6
2
1
N
Filter by Skill/Maintenance Level
R
A.5.2.3.8.7
2
1
N
Filter by Unique Identification Code
O
A.5.2.3.8.8
2
2
N
Graphical Navigation
R
A.5.2.3.8.9
1
1
N
History of Traversed Links
R
A.5.2.3.8.10
1
1
N
Next and Previous
R
A.5.2.3.8.11
1
1
N
Forward and Back
R
A.5.2.3.8.12
2
2
N
Search - Context
R
A.5.2.3.8.13
1
1
N
Search - Full Text
R
A.5.2.3.8.13.2
1
1
N
Search - User Defined Boolean
R
A.5.2.3.8.13.3
4
3
N
Search - Across Multiple Databases/Files
R
A.5.2.3.8.13.4
2
2
N
Search - Key Word
R
A.5.2.3.8.13.5
2
2
N
Simultaneous display of multiple content elements
O
A.5.2.3.8.14
1
1
N
System/Subsystem Navigation
R
A.5.2.3.8.15
2
2
N
Tear off Window Capability

A.5.2.3.8.16

1
1
N
User Creation of Bookmarks
R
A.5.2.3.8.17
3
3
N
Voice-Activated Commands
O
A.5.2.3.8.18
1
2
P
Work Package Specific Printing
R
A.5.2.3.9.1
4
5
P
Fully Formatted/Book Version
R
A.5.2.3.9.2
2
2
P
Print Linked Data
O
A.5.2.3.9.3
1
1
P
Print Screen
R
A.5.2.3.9.4
1
1
P
Print Frame
R
A.5.2.3.9.5
1
1
S
Alerts
R
A.5.2.3.10.1
4
4
S
Animation
R
A.5.2.3.10.2
2
2
S
Audio
R
A.5.2.3.10.3
1
1
S
Content Sensitive Help (Technical Data Help)
R
A.5.2.3.10.4
2
2
S
Context Sensitive Help (Viewer Help)
R
A.5.2.3.10.4.2
3
3
S
Motion Video
R
A.5.2.3.10.5
1
1
S
Digital Photos
R
A.5.2.3.10.6
3
3
S
User Training
R
A.5.2.3.10.7
1
2
S
Browsing
R
A.5.2.3.10.8
1
1
S
Selectable Text
O
A.5.2.3.10.9
2
3
S
Selectable Graphics
O
A.5.2.3.10.10
S
Guide Post

NOTE

When specified by the acquiring activity, the following guide post requirements are required.

R
A.5.2.3.10.11
1
2
S
Reset User Interface To Standard Default
R
A.5.2.3.10.11a
1
2
S
Minimize IETM
O
A.5.2.3.10.11b
1
1
S
Print Frame
O
A.5.2.3.10.11c
4
5
S
Change To Page View
O
A.5.2.3.10.11d
1
3
S
Open New IETM
O
A.5.2.3.10.11e
1
1
S
Suspend
O
A.5.2.3.10.11f
1
1
S
Restart
O
A.5.2.3.10.11g
2
2
S
View Revision Summary
R
A.5.2.3.10.11h
1
1
S
Back
O
A.5.2.3.10.11i
1
1
S
Forward
O
A.5.2.3.10.11j
1
2
S
Abort Browse Mode
O
A.5.2.3.10.11k
2
2
S
Toggle Screen Panels/Bars On and Off
O
A.5.2.3.10.11l
2
2
S
Drill Up/Drill Down
R
A.5.2.3.10.11m
1
1
S
Other Custom Functions
O
A.5.2.3.10.11n
1
1
S
Exit Guide Post
R
A.5.2.3.10.11o
2
2
U
Active Change Indications and markings
R
A.5.2.3.11.1
2
2
U
Block Cycle with /Urgent Changes
R
A.5.2.3.11.2
1
1
U
Full Revision
R
A.5.2.3.11.3
2
2
U
Near Real Time Updates
R
A.5.2.3.11.4
2
2
Uo
Network Connectivity

A.5.2.3.12.1

2
2
Uo
Network Connectivity - Context Filtering

A.5.2.3.12.1.1

2
2
Uo
Network Connectivity - Update Capability (Full Revision)

A.5.2.3.12.1.2

4
4
Uo
Network Connectivity - Update Capability (Partial)

A.5.2.3.12.1.3

1
1
Uo
Stand Alone Mode
R
A.5.2.3.12.2
3
3
Uo
Stand Alone Mode -Context Filtering
R
A.5.2.3.12.2.1
1
1
Uo
Stand Alone Mode - Update Capability (Full Revision)
R
A.5.2.3.12.2.2
4
4
Uo
Stand Alone Mode - Update Capability (Partial)
R
A.5.2.3.12.2.3
2
3
Uo
Web Browser Viewable
O
A.5.2.3.12.3
RRequired
PProhibited
OOptional

TABLE A-XVII TM REQUIREMENTS MATRIX

IETM

MIL-STD-40051-1 TM Requirements Matrix – Table A-XVII 11

TM Content
23&P
24&P
40&P
MIL-STD- 40051-1 Reference
Element Name
INTRODUCTORY MATTER
R
R
R
5.2.1
<framed.frnt>
IETM Installation data
R
R
R
5.2.1.1
CD content frame
R
R
R
5.2.1.2

(MC) Promulgation letter

5.2.1.3
<promulgation>

Warning summary

5.2.1.4
<warnsum>

Revision summary frame

5.2.1.5
<revisionsummary>
Identification information
R
R
R
5.2.1.6
<frntcover>
Table of contents
R
R
R
5.2.1.7
<contents>
How to use this IETM
R
R
R
5.2.1.8
<howtouse>
GENERAL INFORMATION, EQUIPMENT DESCRIPTION AND THEORY OF OPERATION
R
R
R
B.5.1
<gim>
GENERAL INFORMATION WORK PACKAGE
R
R
R
B.5.2
<ginfowp>
Scope
R
R
R
B.5.2.3
<scope>
Maintenance forms, records, and reports
R
R
R
B.5.2.4
<mfrr>
Reporting equipment improvement recommendations (EIR)
R
R
R
B.5.2.5
<eir>
Hand receipt (HR) information
R
R
R
B.5.2.6
<handreceipt>
Corrosion prevention and control (CPC)
R
R
R
B.5.2.7
<cpcdata>
Ozone depleting substances (ODS)
R
R
R
B.5.2.8
<odsdata>
Destruction of Army materiel to prevent enemy use
R
R
R
B.5.2.9
<destructmat>
Preparation for storage or shipment
R
R
R
B.5.2.10
<pssref>

Warranty information

B.5.2.11
<wrntyref>
Nomenclature cross-reference list
R
R
R
B.5.2.12
<nomenreflist>
List of abbreviations/acronyms
R
R
R
B.5.2.13
<loa>
Quality assurance (QA)
Aviation
B.5.2.14
<qainfo>

Non-aviation

Quality of material

B.5.2.15
<qual.mat.info>
Safety, care, and handling
R
R
R
B.5.2.16
<sftyinfo>
Nuclear hardness
R
R
R
B.5.2.17
<hcp>
Calibration
R
R
R
B.5.2.18
<calref>
Flight safety critical aircraft part
Aviation
B.5.2.23
<fscapreq>

Non-aviation

Supporting information for repair parts, special tools, TMDE, and support equipment
R
R
R
B.5.2.25
<supdata>

Copyright credit line

B.5.2.26
<copyrt>
EQUIPMENT DESCRIPTION AND DATA WORK PACKAGE
R
R
R
B.5.3
<descwp>
Equipment characteristics, capabilities, and features
R
R
R
B.5.3.3
<eqpinfo>

Location and description of major components (Not required for Conventional and Chemical Ammunition IETMs)

R
R
R
B.5.3.4
<locdesc>
Differences between models
R
R
R
B.5.3.5
<eqpdiff>
Equipment data
R
R
R
B.5.3.6
<eqpdata>
THEORY OF OPERATION WORK PACKAGE
R
R
R
B.5.4
<thrywp>

TROUBLESHOOTING PROCEDURES

NOTE

The notation (*) indicates that, if required, at least one of the these content items shall be included

R
R
R
D.5.1
<tim>
INTRODUCTION WORK PACKAGE
R
R
R
D.5.5.3
<tsintrowp>
TECHINICAL DESCRIPTION WORK PACKAGE
R
R
R
D.5.5.4
<techdescwp>
Equipment description and data
R
R
R
D.5.5.4.3
<descproc>
Controls and indicators
R
R
R
D.5.5.4.4
<ctrlindproc>
Theory of Operation
R
R
R
D.5.5.4.5
<thryproc>
TROUBLESHOOTING INDEX WORK PACKAGE
R
R
R
D.5.5.5
<tsindxwp>

*OPERATIONAL CHECKOUT WORK PACKAGE

D.5.5.8.3
<opcheckwp>

*TROUBLESHOOTING PROCEDURES WORK PACKAGE

D.5.5.8.4
<tswp>

*COMBINED OPERATIONAL CHECKOUT AND TROUBLESHOOTING PROCEDURES WORK PACKAGE

D.5.5.8.5
<opcheck-tswp>
*DIAGNOSTICS WORK PACKAGE
R
R
R
D.5.6
<diagnosticswp>
MAINTENANCE INSTRUCTIONS
R
R
R
E.5.1
<mim>
SERVICE UPON RECEIPT WORK PACKAGE
R
R
R
E.5.3.2
<surwp>

Siting requirements

E.5.3.2.3.1
<siting>

Shelter requirements

E.5.3.2.3.2
<shltr>

Service upon receipt of materiel

E.5.3.2.3.3
<surmat>

Installation instructions

E.5.3.2.3.4
<install>

Preliminary servicing of equipment

E.5.3.2.3.5
<preserv>

Preliminary checks and adjustment of equipment

E.5.3.2.3.6
<prechkadj>

Preliminary calibration of equipment

E.5.3.2.3.7
<precal>

Circuit alignment

E.5.3.2.3.8
<calign>

Ammunition markings

E.5.3.2.3.9.1
<ammo.markings>

Classification of defects

E.5.3.2.3.9.2
<ammo.defect>

Ammunition handling

E.5.3.2.3.9.3
<ammo.handling>

Procedures to activate ammunition

E.5.3.2.3.9.4
<arm>

Additional service upon receipt task

E.5.3.2.3.10
<other.surtsk>

Follow-on maintenance

E.5.3.2.3.11
<followon.maintsk>

EQUIPMENT / USER FITTING INSTRUCTIONS WORK PACKAGE (PERSONAL USE EQUIPMENT)

E.5.3.3
<perseqpwp>
PMCS INTRO WORK PACKAGE
Aviation
E.5.3.4.1
<pmcsintrowp>
Non-Aviation
R
R
R
PMCS WORK PACKAGE
Aviation
E.5.3.4.2
<pmcswp>
Non-Aviation
R
R
R
PREVENTIVE MAINTENANCE INSPECTION WORK PACKAGE
Aviation
E.5.3.12.1
<pmiwp>
Non-Aviation
R
R
R

MAINTENANCE WORK PACKAGES

NOTE

As applicable, the following maintenance tasks shall be presented in the general order listed below:

R
R
R
E.5.3.5
<maintwp>
Assembly and preparation for use
Aviation
E.5.3.5.3.2
<prepforuse>
Non-Aviation
R
R
R

Servicing

E.5.3.5.3.3
<service>

Ground handling

E.5.3.5.3.4
<groundtsk>

Inspection of installed items

E.5.3.5.3.5
<inspinstitm>

Removal

E.5.3.5.3.6
<remove>

Disassembly

E.5.3.5.3.7
<disassem>

Cleaning

E.5.3.5.3.8
<clean>

Inspection - acceptance and rejection criteria

E.5.3.5.3.9
<acptrejinsp>

Nondestructive testing inspection (NDTI)

E.5.3.5.3.10
<ndti>

Repair or replacement

E.5.3.5.3.11
<repair-rplc>

Alignment

E.5.3.5.3.12
<align>

Painting

E.5.3.5.3.13
<paint>

Lubrication

E.5.3.5.3.14
<lube>

Assembly

E.5.3.5.3.15
<assem>

Test and inspection

E.5.3.5.3.16
<test-inspect>

Installation

E.5.3.5.3.17
<install>

Adjustment

E.5.3.5.3.18
<adjust>

Calibration

E.5.3.5.3.19
<calibration>

Radio interference suppression

E.5.3.5.3.20
<ris>

Placing in service

E.5.3.5.3.21
<pis>

Testing

E.5.3.5.3.22
<test-pass>
Overhaul and retirement schedule
Aviation
E.5.3.5.3.24
<orsch>

Non-Aviation

Preparation for storage or shipment

E.5.3.5.3.25
<pss>

Classification of defects

E.5.3.5.3.26
<ammo.defect>

Handling ammunition

E.5.3.5.3.27
<ammo.handling>

Ammunition markings

E.5.3.5.3.28
<ammo.markings>

Procedures for ammunition activation

E.5.3.5.3.29
<arm>

Additional maintenance task

E.5.3.5.3.30
<other.maintsk>

Follow-on maintenance

E.5.3.5.3.31
<followon.maintsk>
GENERAL MAINTENANCE WORK PACKAGE
R
R
R
E.5.3.6
<maintwp>
LUBRICATION INSTRUCTION WORK PACKAGE
R
R
R
E.5.3.7
<lubewp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE
R
R
R
E.5.3.9
<manuwp>
Introduction work package
R
R
R
E.5.3.9.1
<intro>
Manufacturing procedures work package
R
R
R
E.5.3.9.2
<manfcprocwp>
TORQUE LIMITS WORK PACKAGE
R
R
R
E.5.3.10
<torquewp>
AIRCRAFT INVENTORY MASTER GUIDE WORK PACKAGE
Aviation
E.5.3.12.2
<inventorywp>

Non-Aviation

STORAGE OF AIRCRAFT WORK PACKAGE
Aviation
E.5.3.12.3
<storagewp>

Non-Aviation

WEIGHING AND LOADING WORK PACKAGE
Aviation
E.5.3.12.4
<wtloadwp>

Non-Aviation

WIRING DIAGRAMS WORK PACKAGE
R
R
R
E.5.3.11
<wiringwp>
AUXILIARY EQUIPMENT MAINTENANCE INSTRUCTIONS
R
R
R
E.5.1

E.5.2.6 <mim> <auxiliarycategory>

AUXILIARY EQUIPMENT MAINTENANCE WORK PACKAGE
R
R
R
E.5.3.13
<auxeqpwp>
ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE
R
R
R
E.5.3.9
<manuwp>
Introduction work package
R
R
R
E.5.3.9.1
<intro>
Manufacturing procedures work package
R
R
R
E.5.3.9.2
<manfcprocwp>
TORQUE LIMITS WORK PACKAGE
R
R
R
E.5.3.10
<torquewp>
WIRING DIAGRAMS WORK PACKAGE
R
R
R
E.5.3.11
<wiringwp>

AMMUNITION MAINTENANCE INSTRUCTIONS

E.5.1 E.5.2.7 <mim> <ammunitioncategory>

AMMUNITION MAINTENANCE WORK PACKAGE

E.5.3.14.1
<ammowp>

AMMUNITION MARKING INFORMATION WORK PACKAGE

E.5.3.14.2
<ammo.markingwp >

FOREIGN AMMUNITION (NATO) WORK PACKAGE

E.5.3.14.3
<natowp>

AIRCRAFT PMS/PMD

E.5.3.15
<mim>

<pmscategory>

GENERAL INFORMATION WORK PACKAGE

B..5.5
<pms-geninfo>

PMS/PMD INSPECTION WORK PACKAGE

E.5.3.15
<pms-inspecwp>

AIRCRAFT PHASED MAINTEANCE

E.5.3.16
<mim>

<checklistcategory>

GENERAL INFORMATION WORK PACKAGE

B.5.6
<pm-geninfo>

PM INSPECTION WORK PACKAGE

E.5.3.16
<pmi-chklistwp>

General inspection

E.5.3.16.4
<geninspec>

Aircraft area inspection

E.5.3.16.4
<areainspec>

Aircraft power on checks

E.5.3.16.4
<pwron-inspec>

Aircraft final inspection

E.5.3.16.4
<finalinspec>
PARTS INFORMATION
R
R
R
F.5.3.1
<pim>
INTRODUCTION WORK PACKAGE
R
R
R
F.5.3.3
<introwp>
REPAIR PARTS LIST WORK PACKAGE
R
R
R
F.5.3.4.4
<plwp>
REPAIR PARTS FOR SPECIAL TOOLS WORK PACKAGE
R
R
R
F.5.3.6
<stl_partswp>
KIT PARTS LIST WORK PACKAGE
R
R
R
F.5.3.6.3.1
<kitswp>
BULK ITEMS WORK PACKAGE
R
R
R
F.5.3.8
<bulk_itemswp>
SPECIAL TOOLS LIST WORK PACKAGE
R
R
R
F.5.3.8.1
<stlwp>
NSN INDEX WORK PACKAGE
R
R
R
F.5.3.10.1
<nsnindxwp>
PART NUMBER INDEX WORK PACKAGE
R
R
R
F.5.3.10.1
<pnindxwp>
REFERENCE DESIGNATOR INDEX WORK PACKAGE
R
R
R
F.5.3.10.2.1
<refdesindxwp>

SUPPORTING INFORMATION

NOTE

Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.

R
R
R
G.5.1
<sim>
REFERENCES WORK PACKAGE
R
R
R
G.5.2
<refwp>
INTRODUCTION FOR STANDARD TWO-LEVEL OR AVIATION TWO-LEVEL MAC WORK PACKAGE
R
R
G.5.3.1 (Standard) G.5.3.3 (Aviation)
<macintrowp>
MAC WORK PACKAGE (STANDARD TWO-LEVEL OR AVIATION TWO-LEVEL ONLY)
R
R
G.5.3.4
<macwp> <avmac>
EXPENDABLE AND DURABLE ITEMS LIST WORK PACKAGE
R
R
R
G.5.6
<explistwp>
TOOL IDENTIFICATION LIST WORK PACKAGE
R
R
R
G.5.7
<toolidwp>
MANDATORY REPLACEMENT PARTS WORK PACKAGE
R
R
R
G.5.8
<mrplwp>

CRITICAL SAFETY ITEMS(CSI) AND FLIGHT SAFETY CRITICAL AIRCRAFT PARTS (FSCAP) WORK PACKAGE

G.5.9
<csi.fscap.wp>
SUPPORT ITEMS WORK PACKAGE
R
R
R
G.5.10
<supitemwp>
ADDITIONAL SUPPORTING WORK PACKAGES
R
R
R
G.5.11
<genwp>
RRequired
PProhibited
ShadedAs Required

MIL-STD-40051-1 TM Requirements Matrix – Table A-XXI 16

File details come from the government source that posted it. Updated .