Solicitation_Amendment_W56HZV15R0026-0001_-_M917A3_Heavy_Dump_Truck.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2017JUL14

W56HZV

U.S. ARMY CONTRACTING COMMAND

WARREN, MICHIGAN 48397-5000

LISA GERASIMIDIS

EMAIL: LISA.GERASIMIDIS.CIV@MAIL.MIL

W56HZV-15-R-0026

2017MAY25

X

X 2017AUG10 01:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 79

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: LISA GERASIMIDIS

Buyer Office Symbol/Telephone Number: CCTA-HTA-B/(586)282-9971

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

EXECUTIVE SUMMARY

M917A3 Heavy Dump Truck (HDT)

REQUEST FOR PROPOSAL - W56HZV-15-R-0026

Additional information is contained at the M917A3 HDT webpage at:

https://www.fbo.gov/index?s=opportunity&mode=form&id=51de2d58b04090c5d603a6422d454d2e&tab=core&_cview=1

A.1 INTRODUCTION

Request for Proposal (RFP) W56HZV-15-R-0026 is hereby issued by the U.S. Army Contracting Command (ACC), Warren, for the Production

Verification Test (PVT) and Production phases of the M917A3 program. The M917A3 primary mission is to support the full range of military operations. The Army requires units with dependable and deployable M917A3s that have reduced operations and support costs and increased operational effectiveness and readiness over existing systems. This is critical to support the Joint Forces as they conduct more operations in areas of the world with austere infrastructures and little or no host nation support. The M917A3 will be capable of supporting mobility, counter mobility, survivability and sustainment operations.

A.2 M917A3 ACQUISITION STRATEGY

The Government intends to award a 7-year (5-year base and 2-option years) Firm-Fixed Price (FFP), Indefinite Delivery Indefinite

Quantity (IDIQ) contract for the configurations and estimated quantities identified in the table below. The minimum 7-Year quantity consists of the 5 EACH PVT M917A3 HDTs for Ordering Year (OY) 1 (the minimum quantity will be ordered at the time of the basic contract award).

Description OY1 OY2 OY3 OY4 OY5 OY6 OY7 TOTAL___________ ___ ___ ___ ___ ___ ___ ___ _____

M917A3 - Armor Capable 5 0 78 97 99 100 100 479

M917A3 - Armored 0 6 0 45 51 51 51 204______________________________________________________________________________________

TOTAL 5 6 78 142 150 151 151 683

Each offerors proposal will be evaluated through a Source Selection Evaluation Board (SSEB) to determine which offeror can provide the best value to the Army. An approval for decision from the Milestone Decision Authority (MDA) to continue into Production Verification

Testing (PVT) will be determined upon satisfying the HDT Milestone C exit criteria.

A.3 PRODUCTION PHASE(S) AWARD AND POTENTIAL CRITERIA

A.3.1 Threshold and Objective Requirements

The Purchase Description contains technical requirements that have both threshold (required) and objective (desired) performance levels.

Offerors MUST meet all THRESHOLD performance levels identified in the M917A34 Performance Specification (PS-M917A3) (Attachment 0001).

Offerors may propose to meet any OBJECTIVE performance levels indicated in PS-M917A3.

A.3.2 Government Tests During Contract Performance

The Government will conduct PVT of the M917A3, which will consist of Live Fire, Performance and Reliability, Availability, and

Maintainability (RAM) testing. The First Article Test clauses are included and will apply.

A.4 (Revised per Amendment 0001) PROPOSAL SUBMISSION AND OTHER REQUIREMENTS

Section L of the RFP describes the proposal requirements. Proposals will be evaluated in accordance with Section M. The Government will conduct a best value evaluation of technical, price, and small business participation factors. Unless otherwise specified, the revisions of the Military Sandards (MIL-STD) called out in the RFP are those listed in the issue of the Department of Defense Index of

Specifications and Standards (DODISS) and in effect on the date the RFP is issued.

A.5 ORGANIZATIONAL CONFLICTS OF INTEREST (OCI)

2 79

W56HZV-15-R-0026 0001

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

The provisions of FAR 9.5, Organizational Conflict of Interest (OCI), apply to any award(s) made subsequent to RFP. Potential offerors should review their current and planned participation in any other Government contracts, subcontracts, consulting, or teaming arrangements where it may be in a position of actual or perceived bias or unfair competitive advantage. A common example with the potential for OCI is where an entity performs work both as a system contractor/subcontractor and as a Government support contractor for

Government offices involved in the HDT program or related programs.

A.6 ALTERNATE PROPOSALS

Proposals shall conform to the requirements of this solicitation; no alternate proposals will be considered in this procurement.

A.7 EPA COMPLIANCE

The M917A3 is neither subject to EPA Motor Vehicle Heavy Duty Diesel Exhaust emission standards nor the EPA Non-road exhaust emission standards since the M917A3 will contain permanent armor protection. This determination is IAW 40 CFR, Sections 85.1703, 89.908, and

1068.225. Contractor shall ensure National Security Exemption labeling requirements are met IAW EPA regulations. In addition, lubricity canisters/filters shall not be required for proper engine operation.

A.8 SECURITY AND ACCESS REQUIREMENTS

A.8.1 SECRET Facility Clearance

The Prime Contractor and their armor subcontractor are required to have a SECRET Facility Clearance to be eligible for award. The contractor shall comply with the security requirements imparted by the DD Form 254 (Attachment 0025), NIST Special Publication 800-53 and DODI 8500.2, the National Industrial Security Program Operating Manual (NISPOM) and AR 25-2.

http://www.dss.mil/isp/fac_clear/download_nispom.html.

A.8.2 (Revised per Amendment 0001) Purchase Specification Annex

There is an annex to the Purchase Specification that is For Official Use Only (FOUO). This annex will not be posted on FedBizOpps (FBO), but will be available upon request. Please see the M917A3 HDT webpage at https://www.fbo.gov/index?s=opportunity&mode=form&id=51de2d58b04090c5d603a6422d454d2e&tab=core&_cview=1 for information in obtaining the annex. The M917A3 is subject to International Traffic in Arms Regulations (ITAR) export controls and information shall be handled accordingly. Controlled Unclassified Information (CUI) will be made available through an access request via the FBO website at https://www.fbo.gov/index?s=opportunity&mode=form&id=51de2d58b04090c5d603a6422d454d2e&tab=core&_cview=1. Offerors will need to be certified under the United States/Canada Joint Certification Program (JCP) at http://www.logisticsinformationservice.dla.mil/jcp/ in order to be granted access. The Government may reject a proposal if the offeror fails to obtain, prior to proposal submission, the Government-provided export controlled information referenced in PS-M917A3.

A.9 DIFFERENCES BETWEEN SMALL BUSINESS PARTICIPATION FACTOR SUBMITTAL AND SUBCONTRACTING PLAN

There are important differences between the Small Business Participation Factor Submittal and the Small Business Subcontracting Plan as follows:

(1) The Small Business Participation Factor Submittal:

(a) is developed and submitted in accordance with Section L.

(b) is evaluated in accordance with Section M.

(c) has goals that are expressed as a percentage of Total Contract Value.

(d) is required of all offerors, including small businesses.

(2) The Small Business Subcontracting Plan:

(a) is developed and submitted in accordance with FAR 52.219-9 Small Business

Subcontracting Plan and its ALT II incorporated by reference in Section I, and TACOM

Clause 52.219-4005 in Section L.

(b) is evaluated in accordance with the FAR, DFARS, and AFARS.

(c) has goals that are expressed as a percentage of Total Subcontracting Amount.

(d) is not required of small businesses.

*** END OF NARRATIVE A0002 ***

3 79

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Solicitation: W56HZV-15-R-0026

Amendment: 0001

Prepared By: LG

The purpose of this Amendment 0001 to Solicitation: W56HZV-15-R-0026 is as follows:

1. Revise Section C.4.1 to update the Contract Data Requirements List (CDRL) reference as follows:

From: CDRL A069 To: CDRL A009

2. Revise the description of CLIN A069 as follows:

From: IUID Marking Plan To: List of Pass through Warranties

3. Revise the description of CLIN A009 as follows:

From: Item Unique Identification (IUID) To: Item Unique Identification (IUID) Marking Plan

4. Delete Attachment 0016, HDT Milestone Schedule and mark Attachment 0016 as reserved.

5. Delete Section C.1.14.4 and mark that section as reserved.

6. Revise the narrative for CLIN A016 as follows:

FROM: Camouflage Line Basis Drawings is IAW CDRL A016 and Section C.1.14.4 of the SOW.

TO: Camouflage Line Basis Drawings is IAW CDRL A016 and Section C.1.14.5 of the SOW.

7. Revise the FedBizOpps (FBO) weblink in Section A.8.2 to reference the correct link.

8. Revise the narrative for CLINs 1001-1003, 2001-2003, 3008,3009, 4005-4008, 5005-5008, 6005-6008, and 7005-7008 to update the Scope of

Work (SOW) reference as follows:

FROM: Section C.1.7.3 TO: C.1.7.2(b)

9. Revise the description of CLINs 4010, 5010, 6010 and 7010 as follows:

FROM: Maintenance Control System Tailgate (MCS) TO: Material Control System Tailgate (MCS)

10. Revise the narrative for CLINs 3008, 3009, 3012, 4005-4008, 5005-5008, 5012, 6005-6008, 6012, 7005-7008, and 7012 to update the SOW reference as follows:

FROM: Section C.1.7.4.1 TO: Section C.1.7.4

11. Revise Sections C.1.7.2(a), C.1.8.7, and C.1.8.7.1.2 to update the reference of Section C.1.7.4.1 to Section C.1.7.4.

12. Add CLIN A073 to incorporate CDRL A073, IUID Validation and Verification Report that was accidentally omitted.

13. Revise Section C.1.7.2(b) as follows:

FROM: Unless otherwise specified in the contract, all FAT vehicles and armored kits/armor cabs shall be painted Chemical Agent Resistant Coating CARC paint Tan 686, color chip 33446 of

FED-STD-595 IAW PS-M917A3. The paint process shall conform to the most current revision of

MIL-DTL-53072 at time test vehicles are produced.

TO: Unless otherwise specified in the contract, all vehicles and armored kits/armor cabs shall be painted Chemical Agent Resistant Coating CARC paint Tan 686, color chip 33446 of

FED-STD-595 IAW PS-M917A3. The paint process shall conform to the most current revision of

MIL-DTL-53072 at time test vehicles are produced.

14. Delete the following clauses:

52.217-5 EVALUATION OF OPTIONS JUL/1990

52.247-47 EVALUATION--F.O.B. ORIGIN JUN/2003

52.216-4006 METHOD OF PRICE EVALUATION NOV/2007 (TACOM)

4 79

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

52.247-4011 FOB POINT SEP/1978

15. Revise Section A.4 to remove the reference to past performance best value evaluation.

16. Change the numbering of Section C.1.5.4 as follows:

FROM: C.1.5.4 TO: C.1.5.3.1

17. Revise Section E.1 to incorporate the following sentence:

"If the offeror is ISO 9001:2015 registered a Quality Manual is not required."

18. Revise Section L.4.1.3(b) as follows:

FROM: Completely fill out the VCI Data Requirements Matrix (Attachment 0004) for the proposed

M917A3 HDT at GVW in unarmored and armored configurations.

TO: Completely fill out the VCI Data Requirements Matrix (Attachment 0004) for the proposed

M917A3 HDT at GVW in unarmored configuration.

19. Change the numbering of Section C.1.5.5 as follows:

FROM: C.1.5.5 TO: C.1.5.4

20. Revise Section C.2.3(g) to remove the reference of Attachment 0016.

21. Revise the narrative for CLINs 3013 and 6011 to update the Scope of Work (SOW) reference as follows:

FROM: Section C.14.2 TO: C.1.14.2

22. Update Attachment 0001 - M917A3 Performance Specification (PS-M917A3) from the version dated 21 November 2016 to version dated 20

June 2017.

23. Extend the solicitation closing date as follows:

From: 25 July 2017 TO: 10 August 2017

*** END OF NARRATIVE A0003 ***

5 79

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

1001 M917A3 TRUCK - ARMOR CAPABLE 2 EA $ $ ____________________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 1, 1ST ORDERING YR

These vehicles are PVT Test Assets #2 and #4 IAW

Section E.3.3.3.1.

PVT vehicle requirements shall be provided in accordance with (IAW) Section E.3.3.

PVT vehicles shall be painted with Chemical Agent

Resistant Coating (CARC) paint Tan 686 IAW Section

C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.3.1.2.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 1001 to update the CARC Paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

1002 M917A3 TRUCK - ARMOR CAPABLE W/ MCS & ARCTIC KITS 2 EA $ $ _________________________________________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 2, 1ST ORDERING YR

These vehicles are PVT Test Assets #3 and #5 IAW

Section E.3.3.3.1.

PVT vehicle requirements shall be provided IAW

Section E.3.3.1.

PVT vehicles shall be painted with CARC paint Tan 686

IAW Section C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.3.1.2.

6 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 1002 to update the CARC Paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

1003 M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ ___________________________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 3, 1ST ORDERING YR

This vehicle is PVT Test Asset #1 IAW Section

E.3.3.3.1.

PVT vehicle requirements shall be provided IAW

Section E.3.3.1.

PVT vehicles shall be painted with CARC paint Tan 686

IAW Section C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.3.1.2.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 1003 to update the CARC Paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

2001 M917A3 TRUCK - ARMORED 2 EA $ $ ______________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 1, 2ND ORDERING YR

7 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

These vehicles are PVT Test Assets #7 and #9 IAW

Section E.8.3.3.1.

PVT vehicle requirements shall be provided IAW

Section E.8.3.2.

PVT vehicles shall be painted with CARC paint Tan 686

IAW Section C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.8.1.2.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 2001 to update the CARC Paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

2002 M917A3 TRUCK - ARMORED W/ MCS & ARCTIC KITS 3 EA $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 2, 2ND ORDERING YR

These vehicles are PVT Test Assets #8, #10, and #11

IAW Section E.8.3.3.1 and E.12.6.2.

PVT vehicle requirements shall be provided IAW

Section E.8.3.2 and E.12.6.

PVT vehicles shall be painted with CARC paint Tan 686

IAW Section C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.8.1.2.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 2002 to update the CARC Paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

8 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

2003 M917A3 TRUCK - ARMORED W/ MCS 1 EA $ $ _____________________________ ______________ __________________

COMMODITY NAME: PVT: ITEM 3, 2ND ORDERING YR

This vehicle is PVT Test Assets #6 IAW Section

E.8.3.3.

PVT vehicle requirements shall be provided IAW

Section E.8.3.2.

PVT vehicles shall be painted with CARC paint Tan 686

IAW Section C.1.7.2(b) of the SOW.

Testing of PVT vehicles shall be conducted at the

Aberdeen Test Center IAW Section E.8.1.2.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 2003 to update the CARC paint SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

3008 M917A3 TRUCK - ARMOR CAPABLE 77 EA $ $ ____________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 8, 3RD ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be provided IAW Sections C.1.7.4 and C.1.4.1 of the

SOW.

FRP vehicles shall be painted Chemical Agent

Resistant Coating (CARC) paint Tan 686, color chip

9 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

33446 IAW Section C.1.7.2(b) of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 3008 to update the SOW references as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

3009 M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ ___________________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 9, 3RD ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be provided IAW Sections C.1.7.4 and C.1.4.1 of the

SOW.

FRP vehicles shall be painted Chemical Agent

Resistant Coating (CARC) paint Tan 686, color chip

33446 IAW Section C.1.7.2(b) of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 3009 to update the SOW reference as follows:

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

3013 CORROSION AND RUST INHIBITOR 1 EA $ $ ____________________________ ______________ __________________

10 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

COMMODITY NAME: FRP: ITEM 13, 3RD ORDERING YR

This CLIN purchases Corrosion and Rust Inhibitor for the M917A3 truck IAW Section C.1.14.2 of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 3013 to update the Corrosion and Rust Inhibitor SOW reference as follows:

FROM: C.14.2 TO: C.1.14.2

(End of narrative B002)

Packaging and Marking _____________________

4005 M917A3 TRUCK - ARMOR CAPABLE 96 EA $ $ ____________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 5, 4TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 4005 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

11 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

4006 M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ ___________________________________ ______________ __________________

COMMODITY NAME: PROD: ITEM 6, 4TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 4006 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

4007 M917A3 TRUCK - ARMORED 44 EA $ $ ______________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 7, 4TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted CARC paint Tan 686, color chip 33446 IAW Section C.1.7.2(b) of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 4007 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

12 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

4008 M917A3 TRUCK - ARMORED W/ MCS 1 EA $ $ _____________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 8, 4TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted CARC paint Tan 686, color chip 33446 IAW Section C.1.7.2(b) of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 4008 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

4010 M917A3 MATERIAL CONTROL SYSTEM (MCS) TAILGATE 26 EA $ $ _____________________________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 10, 4TH ORDERING YR

The MCS tailgate shall be built IAW Section C.1.14.3 of the SOW.

13 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

Amendment 0001 revises the description for CLIN 4010 as follows:

FROM: Maintenance Control System Tailgate (MCS)

TO: Material Control System Tailgate (MCS)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

5005 M917A3 TRUCK - ARMOR CAPABLE 98 EA $ $ ____________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 5, 5TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 5005 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

14 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

5006 M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ ___________________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 6, 5TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 5006 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

5007 M917A3 TRUCK - ARMORED 50 EA $ $ ______________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 7, 5TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 5007 to update the SOW reference as follows:

15 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

5008 M917A3 TRUCK - ARMORED W/ MCS 1 EA $ $ _____________________________ ______________ __________________

COMMODITY NAME: FRP: ITEM 8, 5TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 5008 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

5010 M917A3 MATERIAL CONTROL SYSTEM (MCS) TAILGATE 26 EA $ $ _____________________________________________ ______________ __________________

16 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

COMMODITY NAME: FRP: ITEM 10, 5TH ORDERING YR

The MCS tailgate shall be built IAW Section C.1.14.3 of the SOW.

(End of narrative B001)

Amendment 0001 revises the description for CLIN 5010 as follows:

FROM: Maintenance Control System Tailgate (MCS)

TO: Material Control System Tailgate (MCS)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6005 OPTION YEAR 1: M917A3 TRUCK - ARMOR CAPABLE 99 EA $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 5, 6TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 6005 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

17 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6006 OPTION YEAR 1: M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ __________________________________________________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 6, 6TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 6006 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6007 OPTION YEAR 1: M917A3 TRUCK - ARMORED 50 EA $ $ _____________________________________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 7, 6TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

18 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 6007 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6008 OPTION YEAR 1: M917A3 TRUCK - ARMORED W/ MCS 1 EA $ $ ____________________________________________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 8, 6TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 6008 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

19 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6010 OPTION YEAR 1: M917A3 MATERIAL CONTROL SYSTEM _____________________________________________

(MCS) TAILGATE 26 EA $ $ ______________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 10, 6TH ORDER YR

The MCS tailgate shall be built IAW Section C.1.14.3 of the SOW.

(End of narrative B001)

Amendment 0001 revises the description for CLIN 6010 as follows:

FROM: Maintenance Control System Tailgate (MCS)

TO: Material Control System Tailgate (MCS)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

6011 OPTION YEAR 1: CORROSION AND RUST INHIBITOR 1 EA $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: OPY1: ITEM 11, 6TH ORDER YR

This CLIN purchases Corrosion and Rust Inhibitor for the M917A3 Truck IAW Section C.1.14.2 of the SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 6011 to update the Corrosion and Rust Inhibitor SOW reference as follows:

FROM: C.14.2 TO: C.1.14.2

(End of narrative B002)

20 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

7005 OPTION YEAR 2: M917A3 TRUCK - ARMOR CAPABLE 99 EA $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: OPY2: ITEM 5, 7TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 7005 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

7006 OPTION YEAR 2: M917A3 TRUCK - ARMOR CAPABLE W/ MCS 1 EA $ $ __________________________________________________ ______________ __________________

COMMODITY NAME: OPY2: ITEM 6, 7TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

21 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 7006 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

7007 OPTION YEAR 2: M917A3 TRUCK - ARMORED 50 EA $ $ _____________________________________ ______________ __________________

COMMODITY NAME: OPY2: ITEM 7, 7TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 7007 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

22 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

INSPECTION: Origin ACCEPTANCE: Origin

7008 OPTION YEAR 2: M917A3 TRUCK - ARMORED W/ MCS 1 EA $ $ ____________________________________________ ______________ __________________

COMMODITY NAME: OPY2: ITEM 8, 7TH ORDERING YR

Full Rate Production (FRP) vehicle requirements shall be built IAW Sections C.1.7.4 and C.1.4.1 of the SOW.

FRP vehicles shall be painted with CARC paint Tan

686, color chip 33446 IAW Section C.1.7.2(b) of the

SOW.

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN 7008 to update the SOW reference as follows:

FRP reference_____________

FROM: C.1.7.4.1 TO: C.1.7.4

CARC Paint reference____________________

FROM: C.1.7.3 TO: C.1.7.2(b)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

7010 OPTION YEAR 2: M917A3 MATERIAL CONTROL SYSTEM _____________________________________________

(MCS) TAILGATE 9 EA $ $ ______________ ______________ __________________

COMMODITY NAME: OPY2: ITEM 10, 7TH ORDER YR

The MCS tailgate shall be built IAW Section C.1.14.3 of the SOW.

(End of narrative B001)

Amendment 0001 revises the description for CLIN 7010 as follows:

FROM: Maintenance Control System Tailgate (MCS)

23 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

TO: Material Control System Tailgate (MCS)

(End of narrative B002)

Packaging and Marking _____________________

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

9000 DATA ITEMS __________

A009 ITEM UNIQUE IDENTIFICATION (IUID) MARKING PLAN 1 LO $ ______________________________________________ __________________

SERVICE REQUESTED: IUID MARKING PLAN

CLIN CONTRACT TYPE:

Firm Fixed Price

Item Unique Identification (IUID) Marking Plan is IAW

CDRL A009 and Section C.4.1 of the SOW.

(End of narrative B001)

Amendment 0001 revises the description for CLIN A009 as follows:

FROM: Item Unique Identification (IUID)

TO: Item Unique Identification (IUID) Marking Plan

(End of narrative B002)

A016 CAMOUFLAGE LINE BASIS DRAWINGS 1 LO $ ______________________________ __________________

SERVICE REQUESTED: CAMOUFLAGE LINE BASIS DRAWING

CLIN CONTRACT TYPE:

Firm Fixed Price

Camouflage Line Basis Drawings is IAW CDRL A016 and

Section C.1.14.5 of the SOW.

24 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

Amendment 0001 revises the narrative for CLIN A016 as follows:

FROM: Camouflage Line Basis Drawings is IAW CDRL A016 and Section C.1.14.4 of the SOW.

TO: Camouflage Line Basis Drawings is IAW CDRL A016 and Section C.1.14.5 of the SOW.

(End of narrative B002)

A069 LIST OF PASS THROUGH WARRANTIES 1 LO $ _______________________________ __________________

SERVICE REQUESTED: IUID MARKING PLAN

CLIN CONTRACT TYPE:

Firm Fixed Price

List of Pass through Warranties is IAW CDRL A069 and

Section H.1.5.1 of the SOW.

(End of narrative B001)

Amendment 0001 revises the description for CLIN A069 as follows:

From: IUID Marking Plan

To: List of Pass through Warranties

(End of narrative B002)

A073 IUID VALIDATION AND VERIFICATION REPORT 1 LO $ _______________________________________ __________________

SERVICE REQUESTED: IUID VALIDATION/VERIF REPORT

IUID Validation and Verification Report is IAW CDRL

A073 and Section C.4.2.6 of the SOW.

(End of narrative B001)

Amendment 0001 adds CLIN A073 - IUID Validation and

25 79

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Verification Report.

(End of narrative B002)

Deliveries or Performance _________________________

26 79

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

SECTION C: DESCRIPTION/SPECIFICATION/STATEMENT OF WORK______________________________________________________

C.1 General: The purpose of this effort is to provide a commercially based M917A3 Heavy Dump Truck (HDT) that shall conform to the requirements of the M917A3 Performance Specification (PS-M917A3) (Attachment 0001).

C.1.1 Security Requirements

C.1.1.1 Security. The contractor and all applicable employees working or supporting this program shall have a favorable investigation before accessing the Army Tank-Automotive and Armaments Command (TACOM) databases and local area network in accordance with (IAW) Army

Regulation (AR) 25-2, or prior to handling controlled unclassified information or materials. The contractor shall be responsible for handling and safeguarding both classified and Controlled Unclassified Information (CUI) in support of this contract. The types of information considered CUI for the program are technical data and information marked Unclassified//For Official Use Only (U//FOUO) by the U.S. Government. When handling classified and U//FOUO information, the contractor shall adhere to the below guidelines, the DD Form

254 and the respective continuation sheets, Department of Defense Manual (DoDM) 5200.01-V4, Army Regulation (AR) 25-55, AR 25-2, AR 25-

1, Department of Defense Instruction (DoDI) 8582.01 Security of Unclassified Department of Defense (DoD) Information on Non-DoD

Information Systems and AR 380-5 Army Information Security Program.. Technical information shall be marked IAW the Program Executive

Office Combat Support & Combat Service Support (U.S. Army) ( PEO CS&CSS) PEO CS&CSS Armoring Systems Security Classification Guide, dated 31 August 2012, and the Department of Defense Instruction (DoDI) 5320.24. The contractor shall not release information or data to the public domain or to any third parties without the express written approval of the PCO. The contractor shall provide any information

IAW Department of Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7000, Disclosure of Information policy. The

Government will receive unlimited rights, as defined by DFARS 252.227-7015(b)(1) in all technical data and software developed under this contract.

C.1.1.1.1 Operations Security (OPSEC). The contractor shall adhere to OPSEC guidelines and DoD and Army Regulations further identified in the attached DD 254 and its respective continuation sheets.

C.1.1.1.2 Security Classification Guide (SCG). Collateral classified information and CUI generated in support of this contract shall be classified and marked IAW the source material used or the governing SCG. The applicable SCG is the PEO CS&CSS Armoring Systems SCG. In addition to the SCG, classified information will also be protected IAW DoD 5220.22-M, National Industrial Security Program Operating

Manual (NISPOM) and the associated DD 254. CUI will be protected IAW the PEO CS&CSS Armoring Systems SCG, the OPSEC Plan, and additional guidance located in the DD 254.

C.1.1.2 External Certification Authority (ECA) Program: The contractor shall participate in the DOD ECA Program. The ECA program allows the contractor to receive and respond to Government For Official Use Only (FOUO) encrypted e-mails. The contractor shall have non-repudiation capability and encryption capability at a minimum, the Medium Assurance (no hardware required) level for authorized personnel. The contractor shall have a DOD approved ECA program in operation NLT 10 days after contract award and it shall remain in operation throughout the contract period of performance. Information on how to participate in the DOD ECA program is available at http://iase.disa.mil/pki/eca/index.html.

C.1.1.3 Security Requirements for Government Test Site/Database Access: The contractor shall have sufficient credentials to access Army controlled facilities (e.g. Government Test Sites) and Army-controlled information networks/databases (e.g. VISION Digital Library

System (VDLS) throughout the entire contract period of performance. The contractor shall have access to For Official Use Only (FOUO)

Information and Controlled Unclassified Information (CUI) as it specifically pertains to the M917A3 program in support of this contract.

The contractors primary technical support shall gain Limited Privileged Access (IT-II) to perform functions stipulated in this contract. Appropriate credentials shall be obtained IAW TACOM Clause 52.215-4400 and Homeland Security Presidential Directive-12 (HSPD-

12), dated 11 Sept 2013. Once a final credentialing determination has been made for the issuance of a Common Access Card (CAC), the contractor shall request an account to VDLS via https://vdls.atc.army.mil.

C.1.1.4 Trusted Associate Sponsorship (TASS) Program. The contractor shall be responsible for processing applications for Common Access

Cards (CAC) for every contractor employee who deploys with the military force, requires daily access to Government test sites, or has need to access any Government computer network IAW Federal Acquisition Regulation (F) 52.204-9, Personal Identity Verification of contractor personnel.

C.1.1.4.1 The contractor shall be responsible for managing requests for new or renewal CAC cards in sufficient time to ensure that all contractor employees have them when needed to perform work under this contract, The norm is at least ten calendar days advance notice to the Trusted Agent (TA), unless there are extenuating circumstance approved by the Contracting Officers Representative (COR) or Procuring

Contracting Officer (PCO).

C.1.1.4.2 The contractor shall obtain an Army knowledge Online (AKO) USER ID for each applicant, including subcontractors, who may be

27 79

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

deployed or require logical access to a Government computer network. The contractor shall go to http://www.us.army.mil and register as an Army Guest with the sponsor being the COR. Note: If the privilege is lost to access AKO, the contractor shall lose the ability to renew their CAC. Therefore, it is critical that contractor employees maintain their AKO accounts.

C.1.1.4.3 The contractor shall assign aFacility Security Officer (FSO) to serve as the firms single point of contact for Trusted

Associate Sponsorship System (TASS). If a FSO is not established, each contractor employee requiring a CAC card will be required to process their own applications.

C.1.1.4.4 CAC applications shall be processed through the DoDs TASS. The contractors FSO or contractors employee shall submit requests for a CAC via email to the PM-HTV TASS Trusted Agent (TA) at ronald.bankston.civ@mail.mil before accessing the TASS website.

C.1.1.4.5 The Government will establish a TASS application account for each CAC request and will provide each contractor employee a USER

ID and Password via email to the FSO. The FSO or contractor employee shall access the TASS account and complete the CAC application

(entering/editing contractor information as applicable) at https://www.dmdc.osd.mil/tass/operator/consent?continueToUrl-

%2Ftass%Findex.jsp. The FSO or contractor employee shall submit completed applications in TASS, and shall follow up to ensure that the

TA is processing the request.

C.1.1.4.6 The Government will notify the contractor of the results of the contractors applicant via email. The results will include one of the following:

a. Approved - Upon approval, the information is transferred to the Defense Enrollment Eligibility Reporting System (DEERS) database and an email notification is sent to the contractor with instructions on obtaining their CAC. The contractor shall proceed to a Real-

Time Automated Personnel Identification System (RAPIDS) station (https://www.dmdc.osd.mil/rsl/) to obtain RAPIDS locations.

b. Rejected Government in separate correspondence will provide reason(s) for rejection.

c. Returned - Additional information, or correction to the application, required by the contractor employee.

C.1.1.4.7 The contractor will maintain records of all approved and rejected applications.

C.1.1.4.8 The Government will provide the FSO with contact information for the TA/COR.

C.1.1.4.9 At the RAPIDS station, the RAPIDS…