ATTACHMENT_0021_-_Operator's_Manual_Electronic_Technical_Manual_(ETM)_Matrix.pdf

MIL-STD-40051-2B

APPENDIX A

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM 9-2320-XXX-10_____________.

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name FRONT MATTER R R R 5.2.1 <paper.frnt>

Front cover R R R 5.2.1.1 <frntcover>

(MC) Promulgation letter 5.2.1.3 <promulgation>

Warning summary 5.2.1.4 <warnsum>

Change transmittal page 5.2.1.5 <chgsheet>

List of effective pages/work packages

R R R 5.2.1.6 <loepwp>

Title page R R R 5.2.1.7 <titleblk>

Table of contents R R R 5.2.1.9 <contents>

How to use this manual R R R 5.2.1.10 <howtouse>

CHAPTER 1.

GENERAL INFORMATION,

EQUIPMENT DESCRIPTION,

AND THEORY OF OPERATION

R R R APPENDIX B <gim>

GENERAL INFORMATION WORK

PACKAGE

R R R B.5.2 <ginfowp>

Scope R R R B.5.2.3 <scope>

Maintenance forms, records, and reports

R R R B.5.2.4 <mfrr>

Reporting Equipment Improvement Recommendations (EIR)

R R R B.5.2.5 <eir>

Hand Receipt (HR) manuals B.5.2.6 <handreceipt>

Corrosion Prevention and Control

(CPC)

R R R B.5.2.7 <cpcdata>

Ozone Depleting Substances

(ODS)

B.5.2.8 <odsdata>

Destruction of Army materiel to prevent enemy use

R R R B.5.2.9 <destructmat>

Preparation for storage or shipment R R R B.5.2.10 <pssref>

Warranty information B.5.2.11 <wrntyref>

Nomenclature cross-reference list R R R B.5.2.12 <nomenreflist>

List of abbreviations/acronyms R R R B.5.2.13 <loa>

Quality of material P R R B.5.2.15 <qual.mat.info>

Safety, care, and handling B.5.2.16 <sftyinfo>

Nuclear hardness B.5.2.17 <hcp>

Calibration B.5.2.18 <calref>

Item unique identification (IUID) B.5.2.19 <iuid>

M917A3 ATTACHMENT 0021

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name Supporting information for repair parts, special tools, TMDE, and support equipment

P B.5.2.26 <supdata>

Copyright credit line B.5.2.27 <copyrt>

EQUIPMENT DESCRIPTION AND

DATA WORK PACKAGE

R R R B.5.3 <descwp>

Equipment characteristics, capabilities, and features

R R R B.5.3.3 <eqpinfo>

Location and description of major components

R R R B.5.3.4 <locdesc>

Differences between models B.5.3.5 <eqpdiff>

Equipment data R R R B.5.3.6 <eqpdata>

THEORY OF OPERATION WORK

PACKAGE

R R R B.5.4 <thrywp>

CHAPTER X.

OPERATOR INSTRUCTIONS

R R R APPENDIX C <opim>

DESCRIPTION AND USE OF

OPERATOR CONTROLS AND

INDICATORS WORK PACKAGE

R R R C.5.2.2.1 <ctrlindwp>

OPERATION UNDER USUAL

CONDITIONS WORK PACKAGE

R R R C.5.2.2.2 <opusualwp>

Operation under usual conditions task

R R R C.5.2.2.2.3 <opertsk>

Security measures for electronic data

C.5.2.2.2.4 <secref>

Siting requirements C.5.2.2.2.5 <site>

Shelter requirements C.5.2.2.2.6 <shelter>

Assembly and preparation for use C.5.2.2.2.7 <prepforuse>

Initial adjustments, before use and self-test

C.5.2.2.2.8 <initial>

Operating procedures R R R C.5.2.2.2.9 <oper>

Operating auxiliary equipment C.5.2.2.2.11 <operaux>

Preparation for movement C.5.2.2.2.12 <prepmove>

Decals and instruction plates C.5.2.2.2.13 <instructplt>

OPERATION UNDER UNUSUAL

CONDITIONS WORK PACKAGE

R R R C.5.2.2.3 <opunuwp>

Security measures for electronic data

C.5.2.2.3.4 <secref>

Unusual environment/weather R R R C.5.2.2.3.5 <unusualenv>

Fording and swimming C.5.2.2.3.6 <fording>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name Interim Chemical, Biological, Radiological, and Nuclear (CBRN) decontamination procedures

C.5.2.2.3.7 <decon>

Jamming and Electronic Countermeasures (ECM) procedures

C.5.2.2.3.8 <ecm>

Degraded operation procedures C.5.2.2.3.9 <degraded>

Decals and instruction plates C.5.2.2.3.10 <instructplt>

EMERGENCY WORK PACKAGE C.5.2.2.4 <emergencywp>

STOWAGE AND DECAL/DATA

PLATE GUIDE WORK PACKAGE

C.5.2.2.5 <stowagewp>

ON-VEHICLE EQUIPMENT

LOADING PLAN WORK PACKAGE

C.5.2.2.6 <eqploadwp>

CHAPTER X.

TROUBLESHOOTING

MASTER INDEX

APPENDIX D

D.5.4.4

<tim> <masterindexcategory>

TROUBLESHOOTING INDEX WORK

PACKAGE

D.5.5.5 <tsindxwp>

CHAPTER X.

TROUBLESHOOTING

PROCEDURES

NOTE

The notation (*) indicates that at least one of the these content items shall be included

R R APPENDIX D

D.5.4.2

<tim> <troublecategory>

INTRODUCTION WORK PACKAGE D.5.5.3 <tsintrowp>

TROUBLESHOOTING INDEX WORK

PACKAGE

D.5.5.5 <tsindxwp>

*OPERATIONAL CHECKOUT WORK

PACKAGES

D.5.5.8.3 <opcheckwp>

*TROUBLESHOOTING WORK

PACKAGES

D.5.5.8.4 <tswp>

*COMBINED OPERATIONAL

CHECKOUT AND

TROUBLESHOOTING WORK

PACKAGES

D.5.5.8.5 <opcheck-tswp>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name

CHAPTER X.

PMCS

MAINTENANCE INSTRUCTIONS

NOTE

PMCS may be in its own chapter or may be combned with other maintenance work packages in a maintenance chapter but not both places.

APPENDIX E

E.5.2.1

<mim> <pmcscategory>

PMCS INTRODUCTION WORK

PACKAGE

R R R E.5.3.4.1 <pmcsintrowp>

PMCS, INCLUDING LUBRICATION

INSTRUCTIONS, WORK PACKAGE

R R R E.5.3.4.2 <pmcswp>

CHAPTER X.

MAINTENANCE INSTRUCTIONS

NOTE

PMCS is required as a minimum in one maintenance chapter. PMCS may be in its own chapter or may be combned with other maintenance work packages in a maintenance chapter but not both places.

R R R APPENDIX E

E.5.2.2 E.5.2.3

<mim> <maintenancepmcscateg ory> <maintenancecategory>

SERVICE UPON RECEIPT WORK

PACKAGE (MAINTAINER LEVEL

ONLY)

P R R E.5.3.2 <surwp>

Service upon receipt tasks P R R E.5.3.2.3 <surtsk>

Siting P E.5.3.2.3.1 <siting>

Shelter requirements P E.5.3.2.3.2 <shltr>

Service upon receipt of materiel P R R E.5.3.2.3.3 <surmat>

Installation instructions P R R E.5.3.2.3.4 <install>

Preliminary servicing of equipment P E.5.3.2.3.5 <preserv>

Preliminary checks and adjustment of equipment

P E.5.3.2.3.6 <prechkadj>

Preliminary calibration of equipment

P E.5.3.2.3.7 <precal>

Circuit alignment P E.5.3.2.3.8 <calign>

Ammunition markings P E.5.3.2.3.9.1 <mark>

Classification of defects P E.5.3.2.3.9.2 <ammo.defect>

Ammunition handling P E.5.3.2.3.9.3 <ammo.handling>

Procedures to activate ammunition P E.5.3.2.3.9.4 <arm>

Additional maintenance task P E.5.3.2.3.10 <other.surtsk>

Follow-on maintenance P E.5.3.2.3.11 <followon.maintsk>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name

EQUIPMENT/USER FITTING

INSTRUCTIONS WORK PACKAGE

E.5.3.3 <perseqpwp>

PMCS INTRODUCTION WORK

PACKAGE

R E.5.3.4.1 <pmcsintrowp>

PMCS WORK PACKAGE R E.5.3.4.2 <pmcswp>

MAINTENANCE WORK PACKAGES R R E.5.3.5 <maintwp>

Maintenance tasks R R E.5.3.5.3 <maintsk> Inspect E.5.3.5.3.2 <inspect> Test E.5.3.5.3.3 <test> Service E.5.3.5.3.4 <service> Adjust E.5.3.5.3.5 <adjust> Align E.5.3.5.3.6 <align> Calibrate E.5.3.5.3.7 <calibration> Remove E.5.3.5.3.8 <remove> Install E.5.3.5.3.9 <install> Replace E.5.3.5.3.10 <replace> Repair E.5.3.5.3.11 <repair> Paint E.5.3.5.3.12 <paint> Overhaul P E.5.3.5.3.13 <overhaul> Rebuild P E.5.3.5.3.14 <rebuild> Lubricate E.5.3.5.3.15 <lube> Mark E.5.3.5.3.16 <mark> Pack E.5.3.5.3.17 <pack> Unpack E.5.3.5.3.18 <unpack> Preserve E.5.3.5.3.19 <preserv> Prepare for use E.5.3.5.3.20 <prepforuse> Assemble E.5.3.5.3.21 <assem> Disassemble E.5.3.5.3.22 <disassem> Clean E.5.3.5.3.23 <clean> Nondestructive inspection E.5.3.5.3.24 <ndi> Radio interference suppression E.5.3.5.3.25 <ris> Place in service E.5.3.5.3.26 <pis> Towing E.5.3.5.3.27 <tow> Jacking E.5.3.5.3.28 <jack> Parking E.5.3.5.3.29 <park> Mooring E.5.3.5.3.30 <moor> Covering E.5.3.5.3.31 <cover> Hoisting E.5.3.5.3.32 <hoist> Sling loading E.5.3.5.3.33 <sling> External power E.5.3.5.3.34 <extpwr> Preparation for shipment and storage

E.5.3.5.3.35 <pss>

Arm E.5.3.5.3.36 <arm> Load E.5.3.5.3.37 <load> Unload E.5.3.5.3.38 <unload> Software maintenance E.5.3.5.3.39 <softwaremaint>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name Additional maintenance task E.5.3.5.3.40 <other.maintsk>

Follow-on maintenance E.5.3.5.3.41 <followon.maintsk>

GENERAL MAINTENANCE WORK

PACKAGE

E.5.3.7 <gen.maintwp>

LUBRICATION INSTRUCTIONS

WORK PACKAGE

E.5.3.8 <lubewp>

ILLUSTRATED LIST OF

MANUFACTURED ITEMS WORK

PACKAGE (MAINTAINER LEVEL

AND ABOVE)

P

E.5.3.10

Illustrated list of manufactured items introduction work package

P R R E.5.3.10.1 <manu_items_introwp>

Manufacturing procedures work package

P R R E.5.3.10.2 <manuwp>

TORQUE LIMITS WORK PACKAGE

(MAINTAINER LEVEL AND ABOVE)

P E.5.3.11 <torquewp>

WIRING DIAGRAMS WORK

PACKAGE (MAINTAINER LEVEL

AND ABOVE)

P E.5.3.12 <wiringwp>

CHAPTER X.

AUXILIARY EQUIPMENT

MAINTENANCE INSTRUCTIONS

APPENDIX E

E.5.2.6

<mim> <auxiliarycategory>

AUXILIARY EQUIPMENT

MAINTENANCE WORK PACKAGE

E.5.3.14 <auxeqpwp>

ILLUSTRATED LIST OF

MANUFACTURED ITEMS WORK

PACKAGE (MAINTAINER LEVEL

AND ABOVE)

P E.5.3.10

Illustrated list of manufactured items introduction work package

P R R E.5.3.10.1 <manu_items_introwp>

Manufacturing procedures work package

P R R E.5.3.10.2 <manuwp>

TORQUE LIMITS WORK PACKAGE

(MAINTAINER LEVEL AND ABOVE)

P E.5.3.11 <torquewp>

WIRING DIAGRAMS WORK

PACKAGE (MAINTAINER LEVEL

AND ABOVE)

P E.5.3.12 <wiringwp>

CHAPTER X.

AMMUNITION

MAINTENANCE INSTRUCTIONS

APPENDIX E

E.5.2.7

<mim> <ammunitioncategory>

AMMUNITION MAINTENANCE

WORK PACKAGE

E.5.3.15.1 <ammowp>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name

AMMUNITION MARKING

INFORMATION WORK PACKAGE

E.5.3.15.2 <ammo.markingwp>

FOREIGN AMMUNITION (NATO)

WORK PACKAGE

E.5.3.15.3 <natowp>

CHAPTER X.

PARTS INFORMATION

(-10, -13, -14) (-13&P, -14&P)

R

R

APPENDIX F <pim>

INTRODUCTION WORK PACKAGE P R R F.5.3.5 <introwp>

REPAIR PARTS LIST WORK

PACKAGE

P R R F.5.3.6 <plwp>

REPAIR PARTS FOR SPECIAL

TOOLS WORK PACKAGE

P F.5.3.7 <stl_partswp>

KIT PARTS LIST WORK PACKAGE P F.5.3.8 <kitswp>

BULK ITEM WORK PACKAGE P F.5.3.9 <bulk_itemswp>

SPECIAL TOOLS LIST WORK

PACKAGE

P F.5.3.10 <stlwp>

NSN INDEX WORK PACKAGE P R R F.5.3.11.1 <nsnindxwp>

P/N INDEX WORK PACKAGE P R R F.5.3.11.2 <pnindxwp>

REFERENCE DESIGNATOR INDEX

WORK PACKAGE

P F.5.3.11.3 <refdesindxwp>

CHAPTER X.

DESTRUCTION OF EQUIPMENT

TO PREVENT ENEMY USE

NOTE

If a separate destruction of material manual is not developed for this equipment, then the destruction chapter must be included.

APPENDIX H <dim>

DESTRUCTION OF EQUIPMENT TO

PREVENT ENEMY USE

INTRODUCTION WORK PACKAGE

R R R H.5.3 <destruct-introwp>

Authority to destroy R R R H.5.3.3 <authorize_to_destroy

Reporting destruction R R R H.5.3.4 <report_destruct>

General destruction information R R R H.5.3.5 <general_destruct_inf o>

Degree of destruction R R R H.5.3.6

Essential components and spare parts

H.5.3.7 <component_spares>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name

DESTRUCTION OF EQUIPMENT TO

PREVENT ENEMY USE

PROCEDURES WORK PACKAGE

R R R H.5.4 <destruct-materialwp>

Parts list H.5.4.3 <essential_spares>

Specific destruction procedures R R R H.5.4.4 <proc>

CHAPTER X.

SUPPORTING INFORMATION

NOTE

Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.

R R R APPENDIX G <sim>

REFERENCES WORK PACKAGE R R R G.5.2 <refwp>

INTRODUCTION FOR NON-

AVIATION TWO-LEVEL

MAINTENANCE MAC WORK

PACKAGE

P R R G.5.3.1 <macintrowp>

MAC WORK PACKAGE (NON-

AVIATION TWO-LEVEL)

P R R G.5.3.3 <macwp>

COMPONENTS OF END ITEM

(COEI) AND BASIC ISSUE ITEMS

(BII) LISTS WORK PACKAGE

R R R G.5.4 <coeibiiwp>

ADDITIONAL AUTHORIZATION

LIST (AAL) WORK PACKAGE

G.5.5 <aalwp>

EXPENDABLE AND DURABLE

ITEMS LIST WORK PACKAGE

R R R G.5.6 <explistwp>

TOOL IDENTIFICATION LIST WORK

PACKAGE

G.5.7 <toolidwp>

MANDATORY REPLACEMENT

PARTS WORK PACKAGE

G.5.8 <mrplwp>

CRITICAL SAFETY ITEMS WORK

PACKAGE

G.5.9 <csi.wp>

SUPPORT ITEMS WORK PACKAGE G.5.10 <supitemwp>

ADDITIONAL SUPPORTING WORK

PACKAGES

G.5.11 <genwp>

REAR MATTER R R R 5.2.3 <rear>

Glossary 5.2.3.1 <glossary>

Alphabetical index 5.2.3.2 <aindx>

DA Form 2028 R R R 5.2.3.3 <da2028>

Authentication page R R R 5.2.3.4 <authent>

TABLE A-II. Operators and combined operator/maintenance requirements matrix for

TM Content -10 -13

-13&P -14

-14&P

MIL-STD-40051-2B

Reference Element Name Foldout pages 5.2.3.5 <foldsect>

Back cover R R R 5.2.3.6 <back>

Legend R - Required P - Prohibited Shaded - As Required