ATTACHMENT_0002_-_Performance_Requirement_Matrix.xlsx
XLSX spreadsheet 25 KB Posted
- Attached to
- M917A3 Heavy Dump Truck (HDT)
- Solicitation number
- W56HZV15R0026
About this file
M917A3 ATTACHMENT 0002
View the file
Other files
Show 40 more
Latest 50 of 55 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Performance Matrix Attachment 0002 - Performance Requirements Matrix
| INSTRUCTIONS: Offeror shall list their proposed level of performance in the green box below for Subfactor 1. | ||||||
| The information entered into Tab 2 - Dump Body Payload Worksheet will feed into this Performance Matrix. (See Tab 2 - Dump Body Payload Worksheet) | ||||||
| NOTE: With the exceptions of those number values highlighted blue, Offerors shall not alter anything in Attachment 0002 | ||||||
| Technical Subfactor | Applicable PSPEC ID NO. | PSPEC Requirement | Offerors Proposed Level of Performance | |||
| Subfactor 1 | ||||||
| Payload | HDT PSPEC-408 | Dump Body Payload (Primary and Secondary Roads). The M917A3 HDT (with and without armor solution) shall be capable of individually hauling a variety of dry and wet loads to include blast rock, concrete with reinforcing bars, dirt, hot asphalt, snow, rubble, large boulders and sand and shall have a rated payload capacity of no less than 22.5 tons (with armor solution weight included in payload) for primary and secondary roads and the use of integrated sideboards for on-road payloads (T); 27 tons for (primary and secondary roads) and the use of integrated sideboards for on-road payloads (O). | Comments. Offeror's proposed level of performance for Subfactor 1 shall be the same as the Proposed Dump Body Payload (D) (Ton) listed at Attachment 0003 Worksheet | |||
| Threshold Payload | Objective Payload | HDT Proposed Dump Body Payload (Ton) | ||||
| M917A3 HDT | No less than 22.5 Ton (with armor solution weight included in payload) | 27.0 Ton (armor solution weight not included in payload) |
| For Subfactor 2, Offeror must indicate meeting Threshold or Objective Level | |||||
| INSTRUCTIONS: Offeror shall list their proposed level of performance in green box below | |||||
| Technical Subfactor | Applicable PSPEC ID NO. | PSPEC Requirement | Offerors Proposed Level of Performance | ||
| Subfactor 2 | |||||
| Force Protection | HDT PSPEC-2780 | Operate Separately. Force Protection (armor solution) integration shall permit the crew cab protection and underbody protection to operate both together on the vehicle and be changed out (e.g., installed and removed) (Threshold); or each protection to operate separately (only one protection without the other installed on the vehicle) and capable of being independently changed out for changing missions, without compromising the function and threat protection provided by each, when operated separately (Objective). | Offeror Proposal Meets (Indicate Only One with an X) | ||
| Threshold: |
Objective:
| INSTRUCTIONS: Offeror shall list their proposed level of performance in the green box below for Subfactor 3 (See Attachment 0004 - Vehicle Cone Index (VCI) Data Rqmts) | |||||
| NOTE: With the exceptions of those number values highlighted blue, Offerors shall not alter any of the requirements in Attachment 0002 | |||||
| Technical Subfactor | Applicable PSPEC ID NO. | PSPEC Requirement | Offerors Proposed Level of Performance | ||
| Subfactor 3 | |||||
| Mobility | HDT PSPEC-1567 | ||||
| Mobility. Vehicle at GVW (without armor) shall have a single pass vehicle cone index (VCI [VCI1]) (fine grain soil) value no greater than 62.0 (Threshold); 48.0 (Objective) with tires at highway tire pressure. | HDT Proposed One-Pass VCI at Highway Pressure |
Dump Body Payload Worksheet Attachment 0002 - Proposed Dump Body Payload Worksheet
Subfactor 1 Payload (Primary and Secondary Roads):
| (1) Gross Vehicle Weight (GVW) = Vehicle Curb Weight (VCW) + Dump Body Payload, where |
| Proposed Dump Body Payload (D) = Dump Payload Weight (P) – Armor Solution Weight with Underwheel and Underbody Blast Protection (A) |
so, D = P – A (EQ 1)
| (2) INSTRUCTIONS: Offeror shall input values for boxes marked (P) and (A) below to indicate your resultant Proposed Dump Body Payload (D) in the green box | ||
| Dump Payload Weight (P) (Ton) | Armor Solution Weight (A) (Ton)* | Offeror's Proposed Dump Body Payload (D) (Ton) |
| 0 | ||
| (*Do not include Fuel Tank Protection Weight here) |
| (3) INSTRUCTIONS: Offeror shall list at green boxes below each proposed level of performance as indicated for VCW, GVW(s) and GVWR | ||
| Proposed VCW (lb) | Proposed GVW Armored and Unarmored (lb) | Proposed GVWR |
(lb)
| (4) INSTRUCTIONS: Offeror shall list at green boxes each proposed level of performance at GVW as indicated for Axle Loads, Axle Spacing and Wheel Base(s) | ||||
| Axle Loads/Axle Spacing | ||||
| Armor Solution (AS)* | Front Axle(s) lb | Intermediate Axle(s) lb | Rear Axle lb | GVWR/GVW (lb) |
| AS Installed* | ||||
| AS Uninstalled** | ||||
| Axle Spacing (in.) | ||||
| Wheel Base(s) (in.) |
| * Includes total weight of Cab Protection, Underwheel and Underbody Protection, and Fuel Tank(s) Protection (e.g., Armored M917A3 Configuration GVW) |
| ** Armor-Capable Configuration GVW |
File details come from the government source that posted it. Updated .