Media Blasting Booth Questions and Answers 1.pdf

60 KB Posted

Attached to
Media Blasting Booth System
Solicitation number
W52P1J-22-R-3028
Issued by

About this file

Written by GovTribe AI ·

This document contains questions and answers regarding a media blasting booth system for a 20-foot length by 32-inch diameter pipe weighing 30,000 pounds. Key details include that the system would need to blast primer off the pipe to achieve a 1.5 to 2.5 mil anchor profile using sand media. Additional requirements specified are for an auger recovery system, 230 or 460 volt/3 phase power, and that painting would be performed after blasting. The related federal contract opportunity is solicitation number W52P1J-22-R-3028 from the Department of the Army Materiel Command Joint Munitions Command for a media blasting booth system, as further described in the attached solicitation and statement of work.

View the file

Other files

File Type Posted
May 9 Media Blasting Booth Questions and Answers 8.pdf PDF
B08 - Amendment 006 W52P1J-22-R-3028 FINAL.pdf PDF
B08 - Amendment 005 W52P1J-22-R-3028 FINAL.pdf PDF
B08 - Attachment 0001 SOW Media Blasting Booth rev2 8APR22.pdf PDF
B08 - Amendment 005 W52P1J-22-R-3028 FINAL.pdf PDF
B08 - Attachment 0001 SOW Media Blasting Booth rev2 8APR22.pdf PDF
B08 - Amendment 004 W52P1J-22-R-3028 FINAL.pdf PDF
B08 - SOW UPDATED Media Blasting Booth Revision 1.pdf PDF
B08 - Amendment 003 W52P1J-22-R-3028 FINAL.pdf PDF
Media Blasting Booth Questions and Answers 7.pdf PDF
B08 - Amendment 0002 W52P1J-22-R-3028 Media Blasting Booth FINAL.pdf PDF
Media Blasting Booth Questions and Answers 6.pdf PDF
Media Blasting Booth Questions and Answers 5.pdf PDF
Media Blasting Booth Questions and Answers 4.pdf PDF
Media Blasting Booth Questions and Answers 3.pdf PDF
Media Blasting Booth Questions and Answers 2.pdf PDF
B08 - Amendment 001 W52P1J-22-R-3028 FINAL.pdf PDF
B08 - Attachment 0001 SOW Media Blasting Booth.pdf PDF
B08 - Solicitation W52P1J-22-R-3028 Media Blasting System FINAL.pdf PDF
Show all 19

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1. What is being Blasted? 20’ length x 32” diameter pipe

2. Height, weight and depth? 20’ length x 32” diameter pipe

3. How much does this part weigh? 30,000 lbs.,

4. How large of a Blast you do you feel like you need? 6” to 12” diameter.

6. What is being Blasted off? primer

7. What media do you intend to us? sand

8. Do you need the full set up, Blast Room, Reclaimer, Blast Pot and Dust Collector? See qualifying statement

9. What kind of recovery is needed, Sweep in, Pneumatic or Auger? Auger

10. Voltage required 230 or 460 volt/3 Phase? See qualifying statement

11. How large is the Air Compressor (Horse Power)? What CFM do you need?

12. How will they load the Blast Room? See qualifying statement

13. What step is being performed before Blasting? n/a

14. What step or procedure is being performed after Blasting? painting

15. What mill profile or finish are they working to achieve? ? Blasting sand that create 1.5 mil to

2.5 mil anchor profile

File details come from the government source that posted it. Updated .