Amendment 02 Revised SOW - Attachment 8_Rust_Go Primer data sheet.pdf

Rust-Go™ Pr imer

OVERVIEW & FEATURES

Rust-Go Primer is a high-quality, fast drying alkyd primer specifically designed as a rust inhibitive primer or a base primer. Rust-Go Primer can be used with Rust-Go VOC Top Coat or several other Garland waterproofing systems to seal and protect a variety of metal roof systems and surfaces. Rust-Go Primer can also be used to treat an aged metal deck before installing a new roof system. Its non-lifting properties make it an ideal primer to use with topcoats that contain strong solvents.

Rust-Go Primer can also be used to seal worn, painted surfaces (after proper surface preparation). Rust-Go Primer has excellent corrosion resistance and can be used as a primer-surface for metal decking when allowed to dry overnight.

Durable - Rust-Go Primer strongly adheres to aged coatings and is resistant to yellowing, mild industrial fumes and light chemical conditions, making it ideal for restoration coating systems.

User Friendly - The ease of application makes Rust-Go Primer fast and simple to use.

Versatile - The Rust-Go Primer is designed to maintain and protect metals from rusting and breaking down. Rust-Go Primer even protects and preserves investments like HVAC equipment, vent work, gas pipes, metal panels, interior railings and other equipment before oxidation and rust deteriorate metal. This will increase the life of the metal components, saving time and money.

APPLICATION

All surfaces must be sound, dry, clean and free of oil, dirt, grease, wax, mildew, loose or flaking paint and rust. Check adhesion of old paint using ASTM 3359, measuring adhesion by Tape Method A. Clean the surface by scraping, sanding, wire brush or blasting.

Wearing protective clothing, gloves and glasses, remove any mildew by washing with a solution of three quarts of warm water and TSP or Simple Green solution. Rinse thoroughly. Dull all hard or glossy surfaces by sanding to assure maximum adhesion. Wipe galvanized surfaces clean with denatured alcohol prior to application.

This product can be applied by spray, brush or roller. See the spray application guide for spray pump equipment requirements and application tips. For brushing and rolling, use a synthetic brush or roller of appropriate size and/or nap for the surface being painted.

Apply Rust-Go Primer over a small area at 4 wet mils or 1/4 gal/100

sq. ft. (0.10 l/m2 ) and let set for 20 minutes. Monitor to ensure adhesion and note if sag occurs. If any sag occurs, adjust coverage as necessary. Otherwise, proceed with application. Avoid excessive re-brushing or re-rolling.

NOTE: For specific metal preparation information, contact your local Garland Representative.

NOTE: Use Xylene or Toluene for clean up.

PRECAUTIONS

• Do not apply when temperatures are below 40˚F (4.4˚C) or rain is in the forecast

• Wear protective clothing and chemical splash goggles to avoid contact with eyes

• Avoid prolonged contact with skin and wash thoroughly after handling

• See Safety Data Sheet for additional safety information and specific product analysis

• Coverage rates may vary based on surface condition/texture and do not take into account material loss due to spraying, surface texture, surface absorption, waste, etc.

The Garland Company UK, LTD Second Way Centre, Second Way Avonmouth, Bristol UK BS11 8DF Phone: 011 44 1174 401050 (Outside UK) Toll Free: 0800 328 5560 (Only in UK)

Garland Canada Inc.

209 Carrier Drive Toronto, Ontario Canada, M9W 5Y8

FAX: 416-747-1980

Phone: 416-747-7995 Toll Free: 800-387-5991 (Only in Canada)

The Garland Company, Inc.

3800 East 91st Street Cleveland, OH 44105

FAX: 216-641-0633

Phone: 216-641-7500 Toll Free: 800-321-9336

For more information, visit us at: www.garlandco.com

Rust-Go™ Pr imer

Tests verified by independent laboratories. Actual roof performance specifications will vary depending on test speed and temperature.

Data reflects samples randomly collected. ± 10% variation may be experienced. The above data supersedes all previously published information. Consult your local Garland Representative or the home office for more information.

Rust-Go is a trademark of The Garland Company, Inc.

© 2021 Garland Industries, Inc. RG P 1021

Technical Data Rust-Go Primer

Flash Point 40ºF (4.4ºC) min

Solids by Weight 69.9% ± 2.0%

Solids by Volume 52.5% ± 2.0%

Viscosity @77°F (25°C)

70 ± 5 KU

Drying Time To Touch Tack Free Dry

30 minutes 1 hour 24 hours

Weight/gal. 12.14 lbs.

Color Red

Shelf Life 1 year

Coverage 1/4 gal. per 100 sq. ft.

(0.10 l/m2)

Packaging 5 gal. pail (18.9 l)

For specific application recommendations, please contact your local Garland Representative or Garland Technical Service Department.

Eco-Facts Rust-Go Primer

VOC < 200 g/L