Amendment 02 Revised SOW - Attachment 1_CPR_White Coating Data Sheet.pdf

CPR™ White Coat ing

OVERVIEW & FEATURES

CPR White Coating is a synthetic liquid rubber membrane specifi-cally formulated for use on metal roofs and metal walls. CPR White can easily be applied over sloped, contoured surfaces and will provide long-lasting, waterproof protection.

The CPR White Coating system cures to a monolithic rubbery membrane with high tensile strength, and the ability to elongate and recover handling metal expansion and contraction. CPR White also has the ability to “bridge” hairline cracks that may develop, while maintaining performance as a continuous waterproofing membrane.

Durable & Resilient - CPR White Coating has exceptional resistance to UV damage and deterioration due to weathering and forms a rubber-like monolithic membrane over the entire surface. It is elastic regardless of the temperature and will expand and contract with the movement of the substrate.

Versatile - CPR System can be applied on most types of metal roof construction materials and surfaces, regardless of slope. On steep slope applications, the coverage rate is cut back and applied in multiple coats.

Lightweight - Completed application is less than 1/5 a pound per square foot, drastically reducing the overall dead weight when compared to conventional systems.

Inhibits Corrosion - When CPR System is used with Rust-Go™ Primer on metal surfaces, it helps deaden sound and resist hail damage.

PREPARATION

Make any necessary repairs, including removal of any wet insulation and roofing materials and replace with like materials. Allow repairs to cure completely. Confirm local water run-off ordinances and restric-tions prior to cleaning roof. Carefully power wash all roof surfaces with greater than 2,000 psi pressure to remove debris, rust, scale, dirt, dust, chalking, peeling or flaking coatings, etc. Do not force wa-ter into the roof system or damage roof surfaces. Wearing personal protective clothing and equipment, remove algae, mildew or fungus with Garland D7 or Simple Green Oxy Solve and scrubbing with a push broom scrub brush. Rinse at least twice to be sure all cleaning agents or contaminants are completely removed to prevent adhesion issues. If the roof surface becomes contaminated with dirt, dust or other particles at any time during the application of the CPR system, cleaning measures must be taken to restore the surface to a suitable condition.

APPLICATION

Refer to the CPR System Application Guidelines for complete installation instructions, preparation, coverage rates and primer requirements.

PRECAUTIONS

• Do not apply if the metal surface temperature is over 140˚F (60˚C)

• Do not use on roof areas subject to ponding water

• Do not apply when rain is expected within 24 hours

• Do not allow the product to freeze

• Store material in dry protected areas and on a clean, raised platform

• Do not apply over silicone coatings

• Reference product SDS prior to application

• Coverage rates may vary based on surface condition/ texture and do not take into account material loss due to spraying, surface texture, surface absorption, waste, etc.

The Garland Company UK, LTD Second Way Centre, Second Way Avonmouth, Bristol UK BS11 8DF Phone: 011 44 1174 401050 (Outside UK) Toll Free: 0800 328 5560 (Only in UK)

Garland Canada Inc.

209 Carrier Drive Toronto, Ontario Canada, M9W 5Y8

FAX: 416-747-1980

Phone: 416-747-7995 Toll Free: 800-387-5991 (Only in Canada)

The Garland Company, Inc.

3800 East 91st Street Cleveland, OH 44105

FAX: 216-641-0633

Phone: 216-641-7500 Toll Free: 800-321-9336

For more information, visit us at: www.garlandco.com

CPR White Coat ing

Tests verified by independent laboratories. Actual roof performance specifications will vary depending on test speed and temperature.

Data reflects samples randomly collected. ± 10% variation may be experienced. The above data supersedes all previously published information. Consult your local Garland Representative or the home office for more information.

CPR, Grip Polyester, Rust-Go, and Greenhouse are trademarks of The Garland Company, Inc. ENERGY STAR is a registered trademark of the U.S. government. The ENERGY STAR program represents a voluntary partnership between businesses and organizations and the federal government to promote energy efficiency and environmental activities (Valid in the U.S. Only).

©2021 Garland Industries, Inc. CPR WC 0121

Technical Data CPR White Coating

Flash Point

(ASTM D 93)

105˚F (40.6˚C)

Viscosity 105 KU

Volume Solids

(ASTM D 2369)

Density @ 77˚F (25˚C)

(ASTM D 1475)

9.0 lbs./gal. (1.08 kg/L)

Dry Time @ 70˚ F (21.1˚C)/50%

RH

To Touch Throughout

Elongation

(ASTM D 412)

600% min.

Tensile Strength

(ASTM D 412)

500 psi

Water Vapor Permeability

(ASTM E 96)

0.3 perms

Shelf Life 1 year

Coverage Roof Walls

1.5 gal./100 sq.ft. (0.61 l/m2)

1.0 gal./100 sq.ft. (0.41 l/m2)

Color White

Packaging 5 gallon pail (18.9 L)

Fungi Resistance

(ASTM G 21)

Zero rating - No fungi growth

For specific application recommendations, please contact your local Garland Representative or Garland Technical Service Department.

Eco-Facts CPR White Coating

VOC <430 g/L

Initial Reflectance 0.84

Initial Emittance 0.91

Initial SRI 105