Amendment 02 Revised SOW - Attachment 3_DATA_Garmesh.pdf

The Garland Company UK LTD Second Way Centre, Second Way Avonmouth, Bristol UK BS11 8DF Phone: 011 44 1174 401050 (Outside UK) Toll Free: 0800 328 5560 (Only in UK)

Garland Canada Inc.

209 Carrier Drive Toronto, Ontario Canada, M9W 5Y8

FAX: 416-747-1980

Phone: 416-747-7995 Toll Free: 800-387-5991 (Only in Canada)

The Garland Company, Inc.

3800 East 91st Street Cleveland, OH 44105

FAX: 216-641-0633

Phone: 216-641-7500 Toll Free: 800-321-9336

For more information, visit us at: www.garlandco.com

GarMesh®

OVERVIEW & FEATURES

GarMesh is used as a reinforcement for repairs to roofing blisters, fractures, punctures and other defects. GarMesh is compatible with either asphalt or tar mastics and adds strength to the roofing repair. It is a Styrene-Butadiene-Rubber (SBR) coated, woven, fiberglass scrim with a distinct orange color that contrasts with bitumens to ensure complete coverage.

APPLICATION

Area to be repaired must be dry, free of all dust, dirt, and debris.

Remove embedded gravel to expose a smooth surface. Priming the sound and dry area with Garla-Prime® is optional, but will promote adhesion. Apply the roofing mastic over the surface to be treated at approximately 1/8 in. (0.32 cm) thick. The mastic should extend 2 in.

(5 cm) in all directions beyond the GarMesh membrane that is to be used. Then apply 1/8 in. (0.32 cm) additional mastic over the embedded GarMesh ensuring that the orange color is completely covered.

For specific application recommendations, please contact your local Garland Representative or Garland Technical Service Department.

Technical Data GarMesh

Tensile Strength per 1 in. (2.54 cm) width

Warp Threads 75 min.

Filling Threads 75 min.

Treatment of Fabric by Weight % of Moisture Free Fabric

15%

Thread Count per 1 in. (2.54 cm) width

Warp Threads 20 ± 1 Filling threads 10 ± 1

Meets ASTM D 1668-86, Type III

Roll Dimensions GarMesh

Widths 6 in. (152.4 mm) and 12 in. (304.8 mm)

Length 150 ft. (45.72 m)

Net Weight 2 oz./sq. yd. (68 g/m2)

Nominal Thickness 8 mils (203.2 microns)

Net Coverage 6 in. roll 12 in roll

75 sq. ft. (6.96 m2) 150 sq. ft. (13.93 m2)

Packaging Individual rolls

Tests verified by independent laboratories. Actual roof performance specifications will vary depending on test speed and temperature.

Data reflects samples randomly collected. ± 10% variation may be experienced. The above data supersedes all previously published information. Consult your local Garland Representative or the home office for more information.

GarMesh and Garla-Prime are trademarks of The Garland Company, Inc.

© 2017 Garland Industries, Inc.

GM 0917