EXHIBIT H CONTRACT DATA REQUIREMENT LIST and DIDS FOR CDRLS A001 TO A030.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DD FORM 1423-2, AUG 96

CONTRACT DATA REQUIREMENTS LIST

(2 Data Items)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER _________________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

14. DISTRIBUTION

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page ____ of ____ Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref.

DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13;

Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-2 (BACK), AUG 96

line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A003 title1: TRAINING COURSE MATERIALS sub1:

auth1:

ref1: SOW 4.7.1 & 4.7.2 req_ofc1: FCDD-ACW-WF dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACW-WF draft1_3:

reg1_3: 1 repro1_3:

addr1_4:

draft1_4:

reg1_4:

repro1_4:

addr1_5:

draft1_5:

reg1_5:

repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 3 totalrepro1: 0 rmks1: SUBMISSION REQUIRED FOR CONUS AND OCONUS OPERATOR (OPNET) AND MAINTAINER (MNET) TRAINING COURSES 60 DAYS PRIOR TO TRAINING EVENT.

TRAINING COURSE MATERIALS MAY BE IN CONTRACTOR FORMAT, UTILIIZING THE LATEST VERSION OF MICROSOFT PRODUCTS.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A004 title2: TRAINING COURSE PROGRAM OF INSTRUCTION (POI) sub2:

auth2:

ref2: SOW 4.7.1 & 4.7.2 req_ofc2: FCDD-ACW-WF dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACW-WF draft2_3:

reg2_3: 1 repro2_3:

addr2_4:

draft2_4:

reg2_4:

repro2_4:

addr2_5:

draft2_5:

reg2_5:

repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 3 totalrepro2: 0 rmks2: SUBMISSION REQUIRED FOR CONUS AND OCONUS OPERATOR (OPNET) AND MAINTAINER (MNET) TRAINING COURSES 60 DAYS PRIOR TO TRAINING EVENT.

POI SHALL AT A MINIMUM INCLUDE THE COURSE TITLE, COURSE LENGTH, PURPOSE, SCOPE, PREREQUISITES, LESSON TOPICS/SUBJECTS, AND LESSON HOURS/DAILY DURATION.

POI MAY BE IN CONTRACTOR FORMAT, UTILIIZING THE LATEST VERSION OF MICROSOFT PRODUCTS.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by:

prep_sign:

prep_date: 9/19/2023 app_by:

app_sign:

app_date: 9/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

DATA ITEM DESCRIPTION

Title: ENGINEERING CHANGE PROPOSAL (ECP)

Number: DI-SESS-80639E Approval Date: 20200211

AMSC Number: N10140 Limitation: N/A

DTIC Applicable: No GIDEP Applicable: No

Preparing Activity: NM Project Number: SESS-2020-003

Applicable Forms: DD Form 1692, Engineering Change Proposal (ECP)

Use/relationship: An Engineering Change Proposal (ECP) provides the documentation in which the engineering change is described and specifies how the proposed change will be implemented.

a. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in EIA-649-1 and the principles of EIA-649 (Copies of these standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel 877-606-7323 [inside USA and Canada] or 724-776-4970 [outside

USA]).

b. This DID may be used in conjunction with DI-SESS-80642, Notice of Revision (NOR). A requirement for NORs and Specification Change Notices (SCN) should be contractually imposed in conjunction with this DID.

c. This DID supersedes DI-SESS-80639D.

d. An electronic version of DD Form 1692, Engineering Change Proposal (ECP), is available online at https://www.esd.whs.mil/dd/.

Requirements:

1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The ECP shall be in one of the following formats:

a. DD Form 1692, Engineering Change Proposal (ECP),

b. The schema required by the Acquirer’s Integrated Digital Environment (IDE), or

c. The Supplier’s preferred format.

3. Content. The ECP shall contain all the information required by DD Form 1692.

End of DI-SESS-80639E

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Source: https://assist.dla.mil -- Downloaded: 2020-03-05T12:27Z

Check the source to verify that this is the current version before use.Provided by IHS Markit Licensee=US Army Material Command - AFC sites EWB/5974512007, User=Donovan, Bria Not for Resale, 01/20/2022 13:24:23 MSTNo reproduction or networking permitted without license from IHS Markit http://www.sae.org/ http://www.esd.whs.mil/dd/

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A005 title1: QUALITY PROGRAM PLAN sub1:

auth1: DI-QCIC-81722 ref1: SOW 5.1.3 req_ofc1: FCDD-ACE-QWC dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QWC draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QPC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACW-WF draft1_5:

reg1_5: 1 repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 5 totalrepro1: 0 rmks1: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A006 title2: TEST PROCEDURE sub2: PHOSPHATE AND CHROME PLATING PRE-PRODUCTION PROCEDURES auth2: DI-NDTI-80603A ref2: SOW 5.1.6 req_ofc2: FCDD-QEP-F dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-MEE-P draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QWC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACE-QPC draft2_5:

reg2_5: 1 repro2_5:

addr2_6: FCDD-ACW-WF draft2_6:

reg2_6: 1 repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 6 totalrepro2: 0 rmks2: BLOCK 8. PRIOR TO PRODUCTION, APPROVAL THROUGH THE CONTRACTING OFFICER IS REQUIRED WITHIN 60 DAYS AFTER CONTRACT AWARD. A DD FORM 250 IS NOT REQUIRED FOR PHOSPHATE COATING AND CHROME PLATING PROCEDURES APPROVAL. CONTRACTOR FORMAT IS ACCEPTABLE.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-QEP-F: MARK.A.GODLEWSKI.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by:

prep_sign:

prep_date: 9/19/2023 app_by:

app_sign:

app_date: 9/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

Title: REQUEST FOR VARIANCE (RFV)

Number: DI-SESS-80640E Approval Date: 20200211

AMSC Number: N10141 Limitation: N/A

Preparing Activity: NM Project Number: SESS-2020-004

Applicable Forms: DD Form 1694, Request for Variance (RFV)

Use/relationship: A Request for Variance (RFV) describes a proposed departure from (a nonconformance with) approved product definition information for a limited amount of time/specified effectivity or a product found to be nonconforming with product definition information after the product has been produced by the production process.

When the RFV describes a proposed departure from approved product definition information

(i.e., pre-production), the variance shall result in a reduction in cost; indicated by enclosing the value in parentheses.

When the RFV describes a product found to be nonconforming after the product has been produced (i.e., post-production), the variance shall result in a reduction in cost; indicated by enclosing the value in parentheses.

When the nonconformance is induced or caused by the Acquirer, a reduction in cost is not required when submitting the RFV.

standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive,

b. This DID supersedes DI-SESS-80640D.

c. An electronic version of DD Form 1694, Request for Variance (RFV), is available online at

2. Format. The RFV shall be in one of the following formats:

a. DD Form 1694, Request for Variance (RFV), Check the source to verify that this is the current version before use.Provided by IHS Markit Licensee=US Army Material Command - AFC sites EWB/5974512007, User=Donovan, Bria Not for Resale, 01/20/2022 13:28:28 MSTNo reproduction or networking permitted without license from IHS Markit

DI-SESS-80640E

3. Content. The RFV shall contain all the information required by DD Form 1694.

End of DI-SESS-80640E

Check the source to verify that this is the current version before use.Provided by IHS Markit Licensee=US Army Material Command - AFC sites EWB/5974512007, User=Donovan, Bria

Not for Resale, 01/20/2022 13:28:28 MSTNo reproduction or networking permitted without license from IHS Markit

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A007 title1: TEST PROCEDURE sub1: MAGNETIC PARTICLE INSPECTION (MPI) PRE-PRODUCTION PROCEDURE auth1: DI-NDTI-80603A ref1: SOW 5.1.6 req_ofc1: FCDD-ACE-QED dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QED draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QWC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACE-QPC draft1_5:

reg1_5: 1 repro1_5:

addr1_6: FCDD-ACW-WF draft1_6:

reg1_6: 1 repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 6 totalrepro1: 0 rmks1: BLOCK 8. PRIOR TO PRODUCTION, APPROVAL THROUGH THE CONTRACTING OFFICER IS REQUIRED WITHIN 60 DAYS AFTER CONTRACT AWARD. A DD FORM 250 IS NOT REQUIRED FOR MPI PROCEDURES APPROVAL. CONTRACTOR FORMAT IS ACCEPTABLE.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QED: KEVIN.E.TEVIS.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A008 title2: TEST PROCEDURE sub2: WELDING PRE-PRODUCTION PROCEDURE auth2: DI-NDTI-80603A ref2: SOW 5.1.6 req_ofc2: FCDD-EIQ-ED dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-EIQ-ED draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QWC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACE-QPC draft2_5:

reg2_5: 1 repro2_5:

addr2_6: FCDD-ACW-WF draft2_6:

reg2_6: 1 repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 6 totalrepro2: 0 rmks2: BLOCK 8. PRIOR TO PRODUCTION, APPROVAL THROUGH THE CONTRACTING OFFICER IS REQUIRED WITHIN 60 DAYS AFTER CONTRACT AWARD. A DD FORM 250 IS NOT REQUIRED FOR WELDING PROCEDURES APPROVAL. CONTRACTOR FORMAT IS ACCEPTABLE.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-EIQ-ED: HENRY.SANCHEZ63.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by:

prep_sign:

prep_date: 9/19/2023 app_by:

app_sign:

app_date: 9/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

Title: NOTICE OF REVISION (NOR)

Number: DI-SESS-80642E Approval Date: 20200211

AMSC Number: N10142 Limitation: N/A

Preparing Activity: NM Project Number: SESS-2020-005

Applicable Forms: DD Form 1695, Notice of Revision (NOR)

Use/relationship: A Notice of Revision (NOR) describes the proposed changes to a technical document being requested by an Engineering Change Proposal (ECP).

standards are available online at www.sae.org or from SAE International, 400 Commonwealth Drive,

b. This DID may be used in conjunction with DI-SESS-80639, Engineering Change Proposal (ECP), and DI-SESS-80643, Specification Change Notice (SCN).

c. This DID supersedes DI-SESS-80642D.

d. An electronic version of DD Form 1695, Notice of Revision (NOR), is available online at

2. Format. The NOR shall be in one of the following formats:

a. DD Form 1695, Notice of Revision (NOR),

3. Content. The NOR shall contain all the information required by DD Form 1695.

End of DI-SESS-80642E

Source: https://assist.dla.mil -- Downloaded: 2020-03-04T11:04Z

Check the source to verify that this is the current version before use.Provided by IHS Markit Licensee=US Army Material Command - AFC sites EWB/5974512007, User=Donovan, Bria Not for Resale, 01/20/2022 13:26:29 MSTNo reproduction or networking permitted without license from IHS Markit

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A009 title1: MEASUREMENT SYSTEM EVALUATION (MSE) - MEASUREMENT AND INSPECTION EQUIPMENT sub1: SYSTEM DESIGN DOCUMENTATION FOR ACCEPTANCE OF PRODUCT auth1: DI-QCIC-81960 ref1: SOW 5.1.9 req_ofc1: FCDD-ACE-QWC dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QWC draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QPC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACW-WF draft1_5:

reg1_5: 1 repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 5 totalrepro1: 0 rmks1: SUBMIT FOR ALL CRITICAL, SPECIAL, AND MAJOR CHARACTERISTICS IN SPEC OR QAP. SUBMIT 90 DAYS PRIOR TO FA OR PRODUCTION, IF FA IS WAIVED. THE GOV'T WILL RESPOND WITHIN 90 DAYS OF RECEIPT OF ORIGINALS AND REVISIONS

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPM: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A010 title2: TEST / INSPECTION REPORT sub2: ACCEPTANCE INSPECTION / TEST DOCUMENTATION auth2: DI-NDTI-80809B ref2: SOW 5.2.1 req_ofc2: FCDD-ACE-QWC dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACE-QWC draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QPC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACW-WF draft2_5:

reg2_5: 1 repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 5 totalrepro2: 0 rmks2: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPM: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by:

prep_sign:

prep_date: 9/19/2023 app_by:

app_sign:

app_date: 9/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A011 title1: CRITICAL CHARACTERISTIC CONTROL (CCC) PLAN sub1:

auth1: FAR CLAUSE 52.246-4011 ref1: SOW 5.2.2.1a, b, & c req_ofc1: FCDD-ACE-QWC dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QWC draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QPC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACW-WF draft1_5:

reg1_5: 1 repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 5 totalrepro1: 0 rmks1: THE CRITICAL CHARACTERISTIC CONTROL PLAN SHALL BE SUNBMITTED FOR APPROVAL TO ADDRESS THE CRITICAL CHARACTERISTICS WITHIN THE SPECIFICATION, QUALITY ASSURANCE PROVISIONS (QAPS), AND TDP.

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A012 title2: TEST / INSPECTION REPORT sub2: INITIAL PRODUCT INSPECTION (IPI) REPORT auth2: DI-NDTI-80809B ref2: SOW 5.2.2.2 req_ofc2: FCDD-ACE-QWC dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACE-QWC draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QPC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACW-WF draft2_5:

reg2_5: 1 repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 5 totalrepro2: 0 rmks2: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPM: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by: Brian D. Donovan prep_sign:

prep_date: 4/19/2023 app_by: Brian D. Donovan app_sign:

app_date: 4/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A013 title1: CERTIFICATION / DATA REPORTS sub1: INITIAL PRODUCT INSPECTION (IPI) REPORT auth1: DI-MISC-82386 ref1: SOW 5.2.2.2 req_ofc1: FCDD-ACE-QWC dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QWC draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QPC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACW-WF draft1_5:

reg1_5: 1 repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 5 totalrepro1: 0 rmks1: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPM: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A014 title2: FAILURE SUMMARY AND ANALYSIS REPORT sub2:

auth2: DI-SESS-80255B ref2: SOW 5.2.2.5 req_ofc2: FCDD-ACE-QWC dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACE-QWC draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QPC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACW-WF draft2_5:

reg2_5: 1 repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 5 totalrepro2: 0 rmks2: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by: Brian D. Donovan prep_sign:

prep_date: 4/19/2023 app_by: Brian D. Donovan app_sign:

app_date: 4/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A015 title1: TEST / INSPECTION REPORT sub1: CONFORMANCE INSPECTION REPORTS auth1: DI-NDTI-80809B ref1: SOW 5.2.3.2 req_ofc1: FCDD-ACE-QWC dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-QWC draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QPC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACW-WF draft1_5:

reg1_5: 1 repro1_5:

addr1_6:

draft1_6:

reg1_6:

repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 5 totalrepro1: 0 rmks1: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A016 title2: CERTIFICATION / DATA REPORTS sub2:

auth2: DI-MISC-82386 ref2: SOW 5.2.3.2 req_ofc2: FCDD-ACE-QWC dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACE-QWC draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QPC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACW-WF draft2_5:

reg2_5: 1 repro2_5:

addr2_6:

draft2_6:

reg2_6:

repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 5 totalrepro2: 0 rmks2: BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by: Brian D. Donovan prep_sign:

prep_date: 4/19/2023 app_by: Brian D. Donovan app_sign:

app_date: 4/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item 4; Clarification of submittal dates in Items 12 and 13;

conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the and does not require any substantial change to conform to Government requirements with regard to depth of content, format, otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any line_item:

exhibit:

xtdp: Off xtm: Off othercat:

system: M2 MACHINE GUN ctr_no:

contr:

data_item1: A017 title1: ENGINEERING CHANGE PROPOSAL (ECP) sub1:

auth1: DI-SESS-80639E ref1: SOW 6.0 req_ofc1: FCDD-ACW-WF dd250_1: LT appcode1:

dist1: D freq1: AS REQUIRED asof1:

firstsub1: AS REQUIRED subsub1:

addr1_1: ACC-NJ-S draft1_1:

reg1_1: 1 repro1_1:

addr1_2: SFAE-SDR-CSW draft1_2:

reg1_2: 1 repro1_2:

addr1_3: FCDD-ACE-SCS draft1_3:

reg1_3: 1 repro1_3:

addr1_4: FCDD-ACE-QWC draft1_4:

reg1_4: 1 repro1_4:

addr1_5: FCDD-ACE-QPC draft1_5:

reg1_5: 1 repro1_5:

addr1_6: FCDD-ACW-WF draft1_6:

reg1_6: 1 repro1_6:

addr1_7:

draft1_7:

reg1_7:

repro1_7:

addr1_8:

draft1_8:

reg1_8:

repro1_8:

addr1_9:

draft1_9:

reg1_9:

repro1_9:

addr1_10:

draft1_10:

reg1_10:

repro1_10:

addr1_11:

draft1_11:

reg1_11:

repro1_11:

addr1_12:

draft1_12:

reg1_12:

repro1_12:

addr1_13:

draft1_13:

reg1_13:

repro1_13:

addr1_14:

draft1_14:

reg1_14:

repro1_14:

totaldraft1: 0 totalreg1: 6 totalrepro1: 0 rmks1: SUBMIT ELECTRONICALLY TO ECP-INPUT@RIA.ARMY.MIL. ELECTRONIC FILES MUST BE LESS THAN 7MB. THE FORMS LOCATED AT HTTP://E-DATA.PICA.ARMY.MIL/PRODTECHDATA/CMDOCS-LINK.HTM ARE THE PREFERRED METHOD OF SUBMISSION FOR THIS DATA. (DD FORMS 1692, 1694, 1695).

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-SCS: ABEL.GOMEZ1.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group1:

totalprice1:

data_item2: A018 title2: NOTICE OF REVISION (NOR) sub2:

auth2: DI-SESS-80642E ref2: SOW 6.0 req_ofc2: FCDD-ACW-WF dd250_2: LT appcode2:

dist2: D freq2: AS REQUIRED asof2:

firstsub2: AS REQUIRED subsub2:

addr2_1: ACC-NJ-SL draft2_1:

reg2_1: 1 repro2_1:

addr2_2: SFAE-SDR-CSW draft2_2:

reg2_2: 1 repro2_2:

addr2_3: FCDD-ACE-SCS draft2_3:

reg2_3: 1 repro2_3:

addr2_4: FCDD-ACE-QWC draft2_4:

reg2_4: 1 repro2_4:

addr2_5: FCDD-ACE-QPC draft2_5:

reg2_5: 1 repro2_5:

addr2_6: FCDD-ACW-WF draft2_6:

reg2_6: 1 repro2_6:

addr2_7:

draft2_7:

reg2_7:

repro2_7:

addr2_8:

draft2_8:

reg2_8:

repro2_8:

addr2_9:

draft2_9:

reg2_9:

repro2_9:

addr2_10:

draft2_10:

reg2_10:

repro2_10:

addr2_11:

draft2_11:

reg2_11:

repro2_11:

addr2_12:

draft2_12:

reg2_12:

repro2_12:

addr2_13:

draft2_13:

reg2_13:

repro2_13:

addr2_14:

draft2_14:

reg2_14:

repro2_14:

totaldraft2: 0 totalreg2: 6 totalrepro2: 0 rmks2: SUBMIT ELECTRONICALLY TO ECP-INPUT@RIA.ARMY.MIL. ELECTRONIC FILES MUST BE LESS THAN 7MB. THE FORMS LOCATED AT HTTP://E-DATA.PICA.ARMY.MIL/PRODTECHDATA/CMDOCS-LINK.HTM ARE THE PREFERRED METHOD OF SUBMISSION FOR THIS DATA. (DD FORMS 1692, 1694, 1695).

BLOCK 14. SUBMIT ELECTRONICALLY TO:

ACC-NJ-SL: JACALYN.B.DYDA.CIV@ARMY.MIL

SFAE-SDR-CSW: LAURA.L.BATTISTA.CIV@ARMY.MIL

FCDD-ACE-SCS: ABEL.GOMEZ1.CIV@ARMY.MIL

FCDD-ACE-QWC: ALEXANDER.M.ANGELO.CIV@ARMY.MIL

FCDD-ACE-QPC: CUSETTA.F.WILSON.CIV@ARMY.MIL

FCDD-ACW-WF: JOHN.R.KOPMANN.CIV@ARMY.MIL

group2:

totalprice2:

prep_by: Brian D. Donovan prep_sign:

prep_date: 4/19/2023 app_by: Brian D. Donovan app_sign:

app_date: 4/19/2023

Page:

of_pages:

app: Adobe Professional 7.0

Reset:

The public reporting burden for this collection of information is estimated to average 220 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the

Item J