Attachment 0009- Special Packaging Instruction_AM5910630_M2 Fixed MG (1).pdf
PDF 307 KB Posted
- Solicitation number
- W15QKN-24-R-0005
About this file
This document is a special packaging instruction for the M2, M48, and M2A1 .50 caliber machine guns and related spare parts. It provides detailed requirements for cleaning, preserving, unit packaging, and shipping the machine guns in either a polyethylene die-cut foam, formed fiber, or foam-in-place design. The instruction specifies components to be removed for packaging, cleaning procedures, approved preservatives, and methods for individually bagging and positioning parts within the shipping container, including barrels, receiver assembly, carrier assembly, extractor, gauge, manuals, and other items. It includes bills of material, drawings, and requirements for special marking of serial numbers and application of bar code labels to the shipping containers.
View the file
Other files
Show all 45
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1005-00-957-3893 181220 C/L18K3002
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA 135.0 3.056 48.0 X 11.0 X 10.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42
13. CLEANING
14. DRYING
15. PACKING
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWINGS
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED. THE CIRCLED NUMBERS REFERENCE STEPS.
GENERAL REQUIREMENTS
1. Machine gun components and basic issue items received as GFE, packaged as specified herein, shall not be repackaged. GFE components and basic issue received otherwise shall be repackaged.
2. Disassembly Instructions: The following components shall be removed from the machine gun to facilitate packaging and cube reduction:
1—Barrel Assembly (7266131) 2—Carrier Assembly (5504080)
WSC: HH ITEM SIZE: 47.04 X 10.68 X 8.64 ITEM WEIGHT: 115.00 APPROVED: JEFFREY VAN DERVEER
DISTRIBUTION STATEMENT A; APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED
DD Form 2169, JUN 1997 Previous editions are obsolete Page 1 of 11 Pages
SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET)
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and
Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1005-00-957-3893 181220 C/L18K3002
17. NOTES/DRAWINGS
DETAILED PRESERVATION, PACKAGING AND PACKING REQUIREMENTS
Materials, method, processes and procedures specified herein shall conform to the requirements of MIl-STD-2073-1.
OPTION ONE (Polyethylene Die-Cut Foam)
1. CLEANING: The machine gun shall be disassembled as necessary to accomplish the required cleaning specified herein. All metallic surfaces shall be cleaned by any applicable process that will not damage the item.
SPECIAL CLEANING (BURNED POWDER RESIDUE) Surfaces of components subjected to burned powder residues shall be scrubbed clean with bristle brushes and/or swabs saturated with rifle bore cleaner conforming to MIL- PRF-372. Flush the scrubbed surfaces with MIL-PRF-680 solvent.
SPECIAL CLEANING OF GAGE AND EXTRACTOR: Each item shall be cleaned with MIL-PRF-680 solvent followed by a rinse in a clean solvent prior to packaging.
DRYING: All cleaned surfaces shall be thoroughly dried prior to preservative application. Drying of barrel bore and chamber shall be dried using clean, dry, lint-free swabs.
2. APPLICATION OF PRESERVATIVE: All metallic surfaces of the machine gun shall be coated with either MIL-PRF- 3150 or MIL-PRF-16173, Grade 3, preservative, applied by any applicable procedure. Excess oil shall be thoroughly drained from coated surfaces. Preserved machine gun shall be allowed to dry for a minimum of one (1) hour prior to unit pack. Lubricants contaminated or removed during the cleaning process shall be reapplied in accordance with the applicable drawing requirements.
3. UNIT PACKAGING:
(a) Disassembled components shall be packaged as specified.
(b) Place support blocks (Parts1 and 2) into unit container (Part 3) as shown on sheet 11.
(c) Heat seal barrels in separate barrier bags (Part 5), insert into tube (Part 16) and position as shown in sheet
11. If only one barrel is shipped with the weapon, place two barrel keys (Part 4) as shown. Barrel keys are to be discarded when two barrels are shipped with the weapon.
(d) Heat seal Receiver Assembly in barrier bag (Part 5) and position in cavities in support blocks.
(e) Heat seal Carrier Assembly in barrier bag (Part 5) and position between end supports on top of weapon and secure to bagged weapon with tape (Part 6)
(f) Place support blocks (Parts 7 and 8) into position as shown on sheet 11.
(g) Individually bag (part 5) and heat seal the following parts:
Extractor (P/N 7160041); and Gage **(P/N 5351217). Position in box (Part 9). Use wadding (Part 10) as necessary to fill voids and prevent movement in box. Seal with two pieces of tape (Part 6). Place box into cavity of butt end support (Part 7) with labeled end up.
**A completed Gage Record Card, DA Form 3023, shall be included with the packaged gage.
(h) Place Mitten, Heat Protective (P/N MIL-M-11199) and Operator’s Manual, TM 9-1005-213-10 each into individual barrier bags (Part 11) and heat seal. Place bagged items into voids between supports.
(i) Place butt hold-down key (Part 12) into position as shown in sheet 11.
(j) Close fiberboard box and seal in accordance with Sealing Method B of ASTM D1974.
(k) Encapsulate container in pouch (Part 13). Manually exhaust air and heat seal.
(l) Line all inner sides of outer container (Part 15) with solid fiberboard pads (part 14) to prevent abrasion or rupture of barrier bag. Insert bagged inner container and seal outer container Method B, ASTM D1974.
(m) Mark unit pack is the shipping container.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 2 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1005-00-957-3893 181220 C/L18K3002
4. SPECIAL MARKING:
a. SERIAL NUMBER: Serial number marking is required and shall be listed on the bar code labels.
b. BAR CODE LABELS: One (1) additional bar code label will be located on the outboard side of each shipping container after containers are palletized, allowing the national stock number and gun serial number to be read without having to unload containers from the palletized load.
OPTION TWO (FORMED FIBER DESIGN)
specified herein. All metallic surfaces shall be cleaned by any applicable process that will not damage the item.
SPECIAL CLEANING (BURNED POWDER RESIDUE) Surfaces of components subjected to burned powder residues shall be scrubbed clean with bristle brushes and/or swabs saturated with rifle bore cleaner conforming to MIL-PRF-
372. Flush the scrubbed surfaces with MIL-PRF-680 solvent.
SPECIAL CLEANING OF GAGE AND EXTRACTOR: Each item shall be cleaned with MIL-PRF-680 solvent followed by a rinse in a clean solvent prior to packaging.
DRYING: All cleaned surfaces shall be thoroughly dried prior to preservative application. Drying of barrel bore
2. APPLICATION OF PRESERVATIVE: All metallic surfaces of the machine gun shall be coated with either MIL-PRF- 3150 or MIL-PRF-16173, Grade 3, preservative, applied by any applicable procedure. Excess oil shall be thoroughly drained from coated surfaces. Preserved machine gun shall be allowed to dry for a minimum of one (1) hour) prior to unit pack. Lubricants contaminated or removed during the cleaning process shall be reapplied in accordance with the
3. UNIT PACKAGING: A set of molded inserts shall be designed at the packaging facilities discretion. The guidelines for design are that weight and cube be minimized; voids are designed to accommodate the individual packages as follows; overall design be a two-piece construction in which the gun protrudes from the bottom piece for ease of removal; and the material constitutions be manufactured from recycled heavy brown sulfate pulp paper, biodegradable and recyclable, moisture content of 5% to 7% at time of manufacture, density 10 lbs to 12 lbs per cubic foot, Suggested Source of Supply: FIBERCEL CORP, PORTVILLE, NY.
(a) Disassembled components shall be packaged as specified.
(b) Heat seal barrels in separate barrier bags (Part 5) and position in specific molded sections of the insert. If only one spare barrel is included, utilize an adequate filler to reduce that void.
(c) Heat seal Receiver Assembly in barrier bag (Part 5) and position in designated cavity of formed insert.
(d) Heat seal Carrier Assembly in barrier bag (Part 5) and position in designated cavity of formed insert.
(e) Individually bag (part 5) and heat seal the following parts:
Extractor (P/N 7160041); and Gage **(P/N 5351217). Position in box (Part 9). Use wadding (Part 10) as necessary to fill voids and prevent movement in box. Seal with two pieces of tape (Part 6). Place box into designated cavity with labeled end up.
**A completed Gage Record Card, DA Form 3023, shall be included with the packaged gage.
(f) Place Mitten, Heat Protective (P/N MIL-M-11199) and Operator’s Manual, TM 9-1005-213-10 each into individual barrier bags (Part 11) and heat seal. Place bagged items into voids.
(g) Close fiberboard box and seal in accordance with Sealing Method B of ASTM D1974.
(h) Encapsulate container in pouch (Part 13). Manually exhaust air and heat seal.
(i) Line all inner sides of outer container (Part 15) with solid fiberboard pads (part 14) to prevent abrasion or rupture of barrier bag. Insert bagged inner container and seal outer container Method B, ASTM D1974.
(j) Mark unit pack is the shipping container.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 3 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1005-00-957-3893 181220 C/L18K3002
17. NOTES/DRAWINGS
4. SPECIAL MARKING:
a. SERIAL NUMBER: Serial number marking is required and shall be listed on the bar code labels.
b. BAR CODE LABELS: One (1) additional bar code label will be located on the outboard side of each shipping container after containers are palletized, allowing the national stock number and gun serial number to be
OPTION THREE (FOAM-IN-PLACE PACKAGING)
specified herein. All metallic surfaces shall be cleaned by any applicable process that will not damage the item.
SPECIAL CLEANING (BURNED POWDER RESIDUE) Surfaces of components subjected to burned powder residues shall be scrubbed clean with bristle brushes and/or swabs saturated with rifle bore cleaner conforming to
MILPRF- 372. Flush the scrubbed surfaces with MIL-PRF-680 solvent.
SPECIAL CLEANING OF GAGE AND EXTRACTOR: Each item shall be cleaned with MIL-PRF-680 solvent followed by a rinse in a clean solvent prior to packaging.
DRYING: All cleaned surfaces shall be thoroughly dried prior to preservative application. Drying of barrel bore
2. APPLICATION OF PRESERVATIVE: All metallic surfaces of the machine gun shall be coated with either MIL-PRF- 3150 or MIL-PRF-16173, Grade 3, preservative, applied by any applicable procedure. Excess oil shall be thoroughly drained from coated surfaces. Preserved machine gun shall be allowed to dry for a minimum of one (1) hour) prior to unit pack. Lubricants contaminated or removed during the cleaning process shall be reapplied in accordance with the
3. UNIT PACKAGING:
A foam-in-place packaging design may be developed at the packaging facilities discretion providing that all items are effectively immobilized, the individual packaging procedures delineated as follows are provided for, and the additional criteria stated here is adhered to. Split-Pack Polyurethane Foam for this process shall be in accordance with MIL- PRF- 83671, Class 1, Category 2, Density 2.0 Lbs. /cubic foot (Tensile strength and oil resistance requirements shall apply.). MIL-HDBK-775 may be used as a general guide. The inspection level should equal S-1 with an AQL of 4%.
(a) Heat seal barrels in separate barrier bags (Part 5).
(b) Heat seal Receiver Assembly in barrier bag (Part 5).
(c) Heat seal Carrier Assembly in barrier bag (Part 5).
(d) Individually bag (part 5) and heat seal the following parts:
Extractor (P/N 7160041); and Gage **(P/N 5351217).
Use of box (part 9) is optional
**A completed Gage Record Card, DA Form 3023, shall be included with the packaged gage.
(e) Place Mitten, Heat Protective (P/N MIL-M-11199) and Operator’s Manual, TM 9-1005-213-10 each into individual barrier bags (Part 11) and heat seal.
(f) All items shall be placed in fiberboard box (Item 3) and foam-place procedures applied.
(g) Close fiberboard box and seal in accordance with Sealing Method B of ASTM D1974.
(h) Encapsulate container in pouch (Part 13). Manually exhaust air and heat seal.
(i) Line all inner sides of outer container (Part 15) with solid fiberboard pads (part 14) to prevent abrasion or rupture of barrier bag. Insert bagged inner container and seal outer container Method B, ASTM D1974.
(j) Mark unit pack is the shipping container.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 4 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1005-00-957-3893 181220 C/L18K3002
17. NOTES/DRAWINGS
4. SPECIAL MARKING:
a. SERIAL NUMBER: Serial number marking is required and shall be listed on the bar code labels.
b. BAR CODE LABELS: One (1) additional bar code label will be located on the outboard side of each shipping container after containers are palletized, allowing the national stock number and gun serial number to be
BILL OF MATERIALS
DD Form 2169, JUN 1997 Previous editions are obsolete Page 5 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 6 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 7 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 8 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 9 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 10 of 11 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports
(0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
5910630 MG, CAL .50: BROWNING, M2, HB, TURRET
TYPE M48 & M48C SERIES W/BII
19204 AMP5910630
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 11 of 11 Pages
File details come from the government source that posted it. Updated .