QAs_02JUL2015.docx
DOCX document 12 KB Posted
- Attached to
- Mortar Weapons Component IDIQ - Part 2 DRAFT Sections A - K Federal contract opportunity
- Solicitation number
- W15QKN15R0014
View the file
Other files for this federal contract opportunity
Show all 48
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
48) We have been unable to locate the electronic artwork files in Gerber 274X format that are referenced by part number 13028465 for the Bare Board, LED Control Circuit as part of the Aiming Post Light (P14C27). Please advise as to the location of these files or upload them to the solicitation site at your earliest convenience.
ANSWER: Circuit Bare Board drawing provided. No QAP. Artwork files provided in attached Zip file.
49) Drawing 12577347, Wrench Spanner (32mm) was not in the TDP. Can a copy please be provided?
ANSWER: Dwg 12577347 and its SPI is attached. No QAP. The Parts List for the Spanner Wrench was not provided since it is obsolete
50) Since section “B” is included in both Volume III (Pricing) and Sections A-M, does the USG want section “B” completely filled out in both Volume III and Sections A-M or are you looking for all sheets filled out only in the Original Volume III as well as Sections A-M? If this is the case, can we supply a matrix reflecting the same prices in the 8 additional copies of Volume III?
ANSWER: The original copy should be a complete copy of all Sections. There is no matrix, Section B is the only acceptable format for prices.
File details come from the government source that posted it. Updated .