Technical Exhibit K - Division 26 - Electrical.pdf

USACE / NAVFAC / AFCEC UFGS- 26 56 00 ( August 2021)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 26 56 00 ( May 2020)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2024

SECTI ON TABLE OF CONTENTS

DI VI SI ON 26 - ELECTRI CAL

SECTI ON 26 56 00

EXTERI OR LI GHTI NG

08/ 21

PART 1 GENERAL

1. 1 REFERENCES

1. 2 RELATED REQUI REMENTS

1. 3 DEFI NI TI ONS

1. 4 SUBMI TTALS

1. 5 QUALI TY ASSURANCE

1. 5. 1 Dr awi ng Requi r ement s

1. 5. 1. 1 Lumi nai r e Dr awi ngs

1. 5. 1. 2 Pol e Dr awi ngs

1. 5. 2 Lumi nai r e Desi gn Dat a

1. 5. 3 ANSI / I ES LM- 79 Test Repor t

1. 5. 4 ANSI / I ES LM- 80 Test Repor t

1. 5. 5 ANSI / I ES TM- 21 Test Repor t

1. 5. 6 Test s f or Fi ber gl ass Pol es

1. 5. 7 Pr essur e Tr eat ed Wood Pol e Qual i t y

1. 5. 8 Phot omet r i c Pl an

1. 5. 9 Test Labor at or i es

1. 5. 10 Regul at or y Requi r ement s

1. 5. 11 St andar d Pr oduct s

1. 5. 11. 1 Al t er nat i ve Qual i f i cat i ons

1. 5. 11. 2 Mat er i al and Equi pment Manuf act ur i ng Dat e

1. 6 DELI VERY, STORAGE, AND HANDLI NG OF POLES

1. 6. 1 Al umi num Pol es

1. 6. 2 St eel Pol es

1. 6. 3 Wood Pol es

1. 6. 4 Fi ber gl ass Pol es

1. 6. 5 Concr et e Pol es

1. 7 WARRANTY

1. 7. 1 Lumi nai r e War r ant y

1. 7. 2 Li ght i ng Cont r ol s War r ant y

1. 7. 3 Pol e War r ant y

1. 8 OPERATI ON AND MAI NTENANCE MANUALS

1. 8. 1 Li ght i ng Syst em

SECTI ON 26 56 00 Page 1

1. 8. 2 Ext er i or Li ght i ng Cont r ol Syst em

PART 2 PRODUCTS

2. 1 PRODUCT COORDI NATI ON

2. 2 LUMI NAI RES

2. 2. 1 Lumi nai r e Sampl es

2. 2. 2 Lumi nai r es

2. 2. 3 Obst r uct i on Mar ker Lumi nai r es

2. 3 LI GHT SOURCES

2. 3. 1 LED Li ght Sour ces

2. 4 LED DRI VERS

2. 4. 1 Remot e LED Dr i ver s

2. 5 LI GHTI NG CONTROLS

2. 5. 1 Syst em

2. 5. 1. 1 Rel ay Panel

2. 5. 1. 2 Di mmi ng Panel

2. 5. 1. 3 Net wor ked Li ght i ng Cont r ol Syst em

2. 5. 1. 4 Gat eway

2. 5. 2 Devi ces

2. 5. 2. 1 Ti me Cl ock

2. 5. 2. 2 Phot osensor s

2. 5. 2. 3 Mot i on Sensor s

2. 5. 2. 4 Li ght i ng Cont act or

2. 6 POLES

2. 6. 1 Al umi num Pol es

2. 6. 2 St eel Pol es

2. 6. 3 Wood Pol es

2. 6. 4 Fi ber gl ass Pol es

2. 6. 5 Concr et e Pol es

2. 6. 5. 1 St eel Rei nf or ci ng

2. 6. 5. 2 Tensi oned Rei nf or ci ng

2. 6. 5. 3 Coat i ng and Sl eeves f or Rei nf or ci ng Member s

2. 6. 5. 4 St r engt h Requi r ement

2. 6. 5. 5 Shaf t Pr epar at i on

2. 6. 6 Br acket s and Suppor t s

2. 6. 7 Pol e Foundat i ons

2. 7 EQUI PMENT I DENTI FI CATI ON

2. 7. 1 Manuf act ur er ' s Namepl at e

2. 7. 2 Label s

2. 8 FACTORY APPLI ED FI NI SH

PART 3 EXECUTI ON

3. 1 I NSTALLATI ON

3. 1. 1 Lumi nai r es

3. 1. 2 LED Dr i ver s

3. 1. 2. 1 Remot e LED Dr i ver s

3. 1. 3 Fi el d- Appl i ed Pai nt i ng

3. 1. 4 Wood Pol es

3. 1. 5 Concr et e Pol es

3. 1. 6 Fi ber gl ass Pol es

3. 1. 7 Al umi num and St eel Pol es

3. 1. 8 Pol e Set t i ng

3. 1. 9 Li ght i ng Cont r ol s

3. 1. 9. 1 Phot osensor s

3. 1. 9. 2 Mot i on Sensor s

3. 1. 10 Gr oundi ng

3. 2 FI ELD QUALI TY CONTROL

SECTI ON 26 56 00 Page 2

3. 2. 1 Test s

3. 2. 1. 1 Li ght i ng Cont r ol Ver i f i cat i on Test

3. 3 CLOSEOUT ACTI VI TI ES

3. 3. 1 Tr ai ni ng

3. 3. 1. 1 Mai nt enance St af f Tr ai ni ng

3. 3. 1. 2 End- User Tr ai ni ng

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 26 56 00 Page 3

USACE / NAVFAC / AFCEC UFGS- 26 56 00 ( August 2021)

Pr epar i ng Act i v i t y: NAVFAC Super sedi ng UFGS- 26 56 00 ( May 2020)

UNI FI ED FACI LI TI ES GUI DE SPECI FI CATI ONS

Ref er ences ar e i n agr eement wi t h UMRL dat ed Apr i l 2024

SECTI ON 26 56 00

EXTERI OR LI GHTI NG

08/ 21

NOTE: Thi s gui de speci f i cat i on cover s l i ght i ng and l i ght i ng cont r ol syst em r equi r ement s f or ext er i or i nst al l at i ons.

Thi s speci f i cat i on does not cover al l possi bl e met hods or r equi r ement s f or ext er i or l i ght i ng;

t her ef or e, desi gner shoul d add speci al i nf or mat i on r equi r ed t o sui t a speci f i c pr oj ect . I ndust r y publ i cat i ons exi st t o ai d t he desi gner i n choosi ng t he best l i ght i ng syst em f or t he pr oj ect .

Publ i cat i ons i ncl ude, but ar e not l i mi t ed t o, t he I l l umi nat i ng Engi neer i ng Soci et y ( I ES) ' Li ght i ng Handbook, 10t h Edi t i on' and RP- 8, ' Recommended Pr act i ce f or Roadway Li ght i ng. '

Adher e t o UFC 1- 300- 02 Uni f i ed Faci l i t i es Gui de Speci f i cat i ons ( UFGS) For mat St andar d when edi t i ng t hi s gui de speci f i cat i on or pr epar i ng new pr oj ect speci f i cat i on sect i ons. Edi t t hi s gui de speci f i cat i on f or pr oj ect speci f i c r equi r ement s by addi ng, del et i ng, or r evi s i ng t ext . For br acket ed i t ems, choose appl i cabl e i t em( s) or i nser t appr opr i at e i nf or mat i on.

Remove i nf or mat i on and r equi r ement s not r equi r ed i n r espect i ve pr oj ect , whet her or not br acket s ar e pr esent .

Comment s, suggest i ons and r ecommended changes f or t hi s gui de speci f i cat i on ar e wel come and shoul d be submi t t ed as a Cr i t er i a Change Request ( CCR) .

NOTE: For suppl ement al i nf or mat i on r egar di ng UFGS 26 56 00, i ncl udi ng PDF and CAD downl oads of l umi nai r e pl at es, go t o:

ht t p: / / www. wbdg. or g/ f f c/ dod/ uni f i ed- f aci l i t i es- gui de- speci f i cat i ons- uf gs/ uf gs- 26- 56- 00

SECTI ON 26 56 00 Page 4

NOTE: Thi s sect i on cont ai ns t he f ol l owi ng l umi nai r e pl at es ( al so r ef er r ed t o as ' sket ches' or ' det ai l s ' . ) These ar e avai l abl e i n met r i c ( SI ) and U. S. Cust omar y ( I P) syst em di mensi ons. Pl at e t i t l es and st y l e number s ar e unchanged f or bot h uni t s.

Do not i ncl ude l i s t of pl at es, of pl at es t hemsel ves, i n pr oj ect speci f i cat i ons. Use l umi nai r e pl at es as det ai l s on dr awi ngs whenever possi bl e. I f speci al f eat ur es ar e r equi r ed, do not modi f y pl at es, but i ndi cat e t hese changes as not es i n l umi nai r e schedul e. The " XL" st y l e number s and dat es must r emai n on t he dr awi ng det ai l s. I f addi t i onal l umi nai r e t ypes ar e needed t hat ar e not cover ed i n pl at es, pr ovi de addi t i onal sket ches or det ai l s on dr awi ngs, but do not l abel as XL pl at e t ype.

PLATE

NUMBER

Ti t l e

XL- 1 LED ROADWAY LUMI NAI RE

XL- 2 LED AREA LUMI NAI RE

XL- 3 LED PEDESTRI AN LUMI NAI RE

XL- 4 LED I LLUMI NATED BOLLARD

XL- 5 LED PARKI NG LOT LUMI NAI RE

XL- 6 LED PARKI NG GARAGE LUNI NAI RE

XL- 7 LED EXTERI OR STEP LI GHT

XL- 8 LED EXTERI OR WALL SCONCE

XL- 9 LED EXTERI OR DECORATI VE WALL SCONCE

XL- 10 LED WALL PACK

XL- 11 EXTERI OR RECESSED DOWNLI GHT

XL- 12 LED LI NEAR WALL WASH

XL- 13 AVI ATI ON OBSTRUCTI ON LUMI NAI RE

XL- 14 LED FLOOD LUMI NAI RE

XL- 15 DI RECT- SET FI BERGLASS POLE

XL- 16 DI RECT- SET CONCRETE POLE

XL- 17 DI RECT- SET STEEL/ ALUMI NUM POLE

SECTI ON 26 56 00 Page 5

PLATE

NUMBER

Ti t l e

XL- 18 ANCHOR BASE FI BERGLASS POLE

XL- 19 ANCHOR BASE STEEL/ ALUMI NUM POLE

XL- 20 ANCHOR BASE CONCRETE POLE

XL- 21 ANCHOR BASE POLE FOUNDATI ON

XL- 22 DI RECT SET POLE GROUNDI NG DETAI L

XL- 23 LUMI NAI RE MOUNTI NG ARM DETAI LS

XL- 24 LUMI NAI RE MOUNTI NG ARM DETAI LS

XL- 25 LUMI NAI RE MOUNTI NG BRACKET DETAI LS

XL- 26 LUMI NAI RE MOUNTI NG BRACKET DETAI LS

NOTE: Do not i ncl ude t hi s i ndex i n pr oj ect speci f i cat i on.

NOTE: I ncl ude t he f ol l owi ng i nf or mat i on on t he pr oj ect dr awi ngs:

1. Lumi nai r e schedul e i ndi cat i ng l umi nai r e symbol ;

l umi nai r e t ype; XL pl at e number and t ype desi gnat i on; l i ght sour ce; vol t age; i nput wat t s;

del i ver ed l umen out put ; ef f i cacy; CCT; CRI ; LED dr i ver ; di mmi ng; mount i ng; NEMA di st r i but i on i f appl i cabl e; BUG r at i ng i f appl i cabl e; and any ot her appl i cabl e opt i ons or not es.

2. Locat i on and mount i ng hei ght of al l l umi nai r es and r equi r ed accessor i es such as, mount i ng br acket s and pol es.

3. Ref er enced XL pl at e number or det ai l ( i f no XL pl at e i s avai l abl e) f or each l umi nai r e t ype pr ovi ded.

4. Al l accessor i es r equi r ed, such as mount i ng har dwar e, mount i ng br acket s, ar ms, NEMA 7- pi n r ecept acl es, r emot e dr i ver s, emer gency back- up, sensor s and cont r ol equi pment , and cent r al emer gency syst em component s.

5. Cont r ol st r at egy descr i pt i on f or each gi ven ar ea.

6. Ext ent and l ocat i on of t he wor k t o be accompl i shed wi t h wi r i ng and equi pment necessar y f or

SECTI ON 26 56 00 Page 6 a compl et e i nst al l at i on.

NOTE: Demol i t i on wor k t hat i nvol ves di sposal of f l uor escent and HI D l i ght sour ces and bal l ast s wi l l r equi r e t he use of Sect i on 02 84 16 HANDLI NG OF LI GHTI NG BALLASTS AND LAMPS CONTAI NI NG PCBs AND

MERCURY.

PART 1 GENERAL

1. 1 REFERENCES

NOTE: Thi s par agr aph i s used t o l i s t t he publ i cat i ons c i t ed i n t he t ext of t he gui de speci f i cat i on. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y and l i s t ed i n t hi s par agr aph by or gani zat i on, desi gnat i on, dat e, and t i t l e.

Use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e when you add a Ref er ence I dent i f i er ( RI D) out si de of t he Sect i on' s Ref er ence Ar t i c l e t o aut omat i cal l y pl ace t he r ef er ence i n t he Ref er ence Ar t i c l e. Al so use t he Ref er ence Wi zar d' s Check Ref er ence f eat ur e t o updat e t he i ssue dat es.

Ref er ences not used i n t he t ext wi l l aut omat i cal l y be del et ed f r om t hi s sect i on of t he pr oj ect speci f i cat i on when you choose t o r econci l e r ef er ences i n t he publ i sh pr i nt pr ocess.

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ALLI ANCE FOR TELECOMMUNI CATI ONS I NDUSTRY SOLUTI ONS ( ATI S)

ATI S ANSI O5. 1 ( 2017) Wood Pol es - - Speci f i cat i ons & Di mensi ons

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

( AASHTO)

AASHTO LTS ( 2013; Er r at a 2013) St andar d Speci f i cat i ons f or St r uct ur al Suppor t s f or Hi ghway Si gns, Lumi nai r es and Tr af f i c Si gnal s

AMERI CAN SOCI ETY OF CI VI L ENGI NEERS ( ASCE)

ASCE 7- 16 ( 2017; Er r at a 2018; Supp 1 2018) Mi ni mum Desi gn Loads and Associ at ed Cr i t er i a f or Bui l di ngs and Ot her St r uct ur es

SECTI ON 26 56 00 Page 7

AMERI CAN WOOD PROTECTI ON ASSOCI ATI ON ( AWPA)

AWPA U1 ( 2023) Use Cat egor y Syst em: User Speci f i cat i on f or Tr eat ed Wood

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2017) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A153/ A153M ( 2023) St andar d Speci f i cat i on f or Zi nc Coat i ng ( Hot - Di p) on I r on and St eel Har dwar e

ASTM B108/ B108M ( 2019) St andar d Speci f i cat i on f or Al umi num- Al l oy Per manent Mol d Cast i ngs

ASTM B117 ( 2019) St andar d Pr act i ce f or Oper at i ng Sal t Spr ay ( Fog) Appar at us

ASTM C1089 ( 2013) St andar d Speci f i cat i on f or Spun Cast Pr est r essed Concr et e Pol es

ASTM G154 ( 2023) St andar d Pr act i ce f or Oper at i ng Fl uor escent Ul t r avi ol et ( UV) Lamp Appar at us f or Exposur e of Mat er i al s

CALI FORNI A ENERGY COMMI SSI ON ( CEC)

CEC Ti t l e 24 ( 2016) Bui l di ng Ener gy Ef f i c i ency St andar ds For Resi dent i al and Nonr esi dent i al Bui l di ngs

EUROPEAN UNI ON ( EU)

Di r ect i ve 2011/ 65/ EU ( 2011) Rest r i ct i on of t he Use of Cer t ai n Hazar dous Subst ances i n El ect r i cal and El ect r oni c Equi pment

I LLUMI NATI NG ENGI NEERI NG SOCI ETY ( I ES)

ANSI / I ES LM- 79 ( 2019) Appr oved Met hod: El ect r i cal and Phot omet r i c Measur ement s of Sol i d St at e Li ght i ng Pr oduct s

ANSI / I ES LM- 80 ( 2020) Appr oved Met hod: Measur i ng Lumi nous Fl ux and Col or Mai nt enance of LED Packages, Ar r ays and Modul es

ANSI / I ES LP- 11 ( 2020) Li ght i ng Pr act i ce: Envi r onment al Consi der at i ons f or Out door Li ght i ng

ANSI / I ES LS- 1 ( 2020) Li ght i ng Sci ence: Nomencl at ur e and Def i ni t i ons f or I l l umi nat i ng Engi neer i ng

ANSI / I ES RP- 8 ( 2018; Addenda 1 2020; Er r at a 1- 2 2021) Recommended Pr act i ce f or Desi gn and Mai nt enance of Roadway and Par ki ng

SECTI ON 26 56 00 Page 8

Faci l i t y Li ght i ng

ANSI / I ES TM- 15 ( 2020) Techni cal Memor andum: Lumi nai r e Cl assi f i cat i on Syst em f or Out door Lumi nai r es

ANSI / I ES TM- 21 ( 2021) Techni cal Memor andum: Pr oj ect i ng Long- Ter mLumi nous, Phot on, and Radi ant Fl ux Mai nt enance of LED Li ght Sour ces

I ES Li ght i ng Li br ar y I ES Li ght i ng Li br ar y

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

I EEE 100 ( 2000; Ar chi ved) The Aut hor i t at i ve Di ct i onar y of I EEE St andar ds Ter ms

I EEE C62. 41. 2 ( 2002) Recommended Pr act i ce on Char act er i zat i on of Sur ges i n Low- Vol t age ( 1000 V and Less) AC Power Ci r cui t s

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

ANSI C136. 3 ( 2020) Roadway and Ar ea Li ght i ng Equi pment

- Lumi nai r e At t achment s

ANSI C136. 13 ( 2020) Roadway and Ar ea Li ght i ng Equi pment

- Met al Br acket s f or Wood Pol es

ANSI C136. 21 ( 2014) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Ver t i cal Tenons Used wi t h Post - Top- Mount ed Lumi nai r es

ANSI C136. 41 ( 2013) Roadway and Ar ea Li ght i ng Equi pment - Di mmi ng Cont r ol Bet ween an Ext er nal Locki ng Type Phot ocont r ol and Bal l ast or Dr i ver

NEMA 250 ( 2020) Encl osur es f or El ect r i cal Equi pment ( 1000 Vol t s Maxi mum)

NEMA ANSLG C78. 377 ( 2017) El ect r i c Lamps— Speci f i cat i ons f or t he Chr omat i c i t y of Sol i d St at e Li ght i ng Pr oduct s

NEMA C82. 77- 10 ( 2020) Har moni c Emi ssi on Li mi t s - Rel at ed Power Qual i t y Requi r ement s

NEMA C136. 10 ( 2023) Amer i can Nat i onal St andar d f or Roadway and Ar ea Li ght i ng Equi pment - Locki ng- Type Phot ocont r ol Devi ces and Mat i ng Recept acl es- - Physi cal and El ect r i cal I nt er changeabi l i t y and Test i ng

NEMA C136. 20 ( 2012; R 2021) Roadway and Ar ea Li ght i ng Equi pment - Fi ber Rei nf or ced Composi t e ( FRC) Li ght i ng Pol es

SECTI ON 26 56 00 Page 9

NEMA C136. 31 ( 2023) Roadway and Ar ea Li ght i ng Equi pment

- Lumi nai r e Vi br at i on

NEMA I CS 2 ( 2000; R 2020) I ndust r i al Cont r ol and Syst ems Cont r ol l er s, Cont act or s, and Over l oad Rel ays Rat ed 600 V

NEMA I CS 6 ( 1993; R 2016) I ndust r i al Cont r ol and Syst ems: Encl osur es

NEMA I EC 60529 ( 2004) Degr ees of Pr ot ect i on Pr ovi ded by Encl osur es ( I P Code)

NEMA SSL 1 ( 2016) El ect r oni c Dr i ver s f or LED Devi ces, Ar r ays, or Syst ems

NEMA SSL 3 ( 2011) Hi gh- Power Whi t e LED Bi nni ng f or Gener al I l l umi nat i on

NEMA WD 7 ( 2011; R 2016; R 2021) Occupancy Mot i on Sensor s St andar d

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2023; ERTA 7 2023; TI A 23- 15) Nat i onal El ect r i cal Code

U. S. DEPARTMENT OF AGRI CULTURE ( USDA)

RUS Bul l 1728F- 700 ( 2011) Speci f i cat i on f or Wood Pol es, St ubs, and Anchor Logs

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

47 CFR 15 Radi o Fr equency Devi ces

UNDERWRI TERS LABORATORI ES ( UL)

UL 773 ( 2016; Repr i nt Jul 2020) UL St andar d f or Saf et y Pl ug- I n, Locki ng Type Phot ocont r ol s f or Use wi t h Ar ea Li ght i ng

UL 773A ( 2016; Repr i nt Jan 2024) UL St andar d f or Saf et y Noni ndust r i al Phot oel ect r i c Swi t ches f or Li ght i ng Cont r ol

UL 916 ( 2015; Repr i nt Oct 2021) UL St andar d f or Saf et y Ener gy Management Equi pment

UL 924 ( 2016; Repr i nt Dec 2022) UL St andar d f or Saf et y Emer gency Li ght i ng and Power Equi pment

UL 1310 ( 2018; Repr i nt Jun 2022) UL St andar d f or Saf et y Cl ass 2 Power Uni t s

UL 1598 ( 2021; Repr i nt Jan 2024) UL St andar d f or Saf et y Lumi nai r es

SECTI ON 26 56 00 Page 10

UL 8750 ( 2015; Repr i nt Sep 2021) UL St andar d f or Saf et y Li ght Emi t t i ng Di ode ( LED) Equi pment f or Use i n Li ght i ng Pr oduct s

1. 2 RELATED REQUI REMENTS

NOTE: Sel ect appl i cabl e t r i - ser vi ce, Ar my, Navy, Ai r For ce, or NASA speci f i cat i on sect i on r ef er ence( s) .

For t he pur pose of t hi s document , ext er i or l umi nai r es i ncl ude l umi nai r es mount ed i n ext er i or envi r onment s t hat ar e not at t ached t o t he bui l di ng.

Lumi nai r es at t ached t o t he ext er i or of t he bui l di ng ar e speci f i ed i n Sect i on 26 51 00 I NTERI OR LI GHTI NG.

Mat er i al s not consi der ed t o be l umi nai r es, l umi nai r e accessor i es, or l i ght i ng equi pment ar e speci f i ed i n Sect i on( s) [ 33 71 02 UNDERGROUND

ELECTRI CAL DI STRI BUTI ON] [ 33 71 01. 00 40 OVERHEAD TRANSMI SSI ON AND

DI STRI BUTI ON] [ 33 71 01 OVERHEAD TRANSMI SSI ON AND DI STRI BUTI ON] .

Lumi nai r es and accessor i es i nst al l ed i n i nt er i or of bui l di ngs or at t ached t o t he ext er i or of a bui l di ng ar e speci f i ed i n Sect i on 26 51 00 I NTERI OR LI GHTI NG. Cyber secur i t y r equi r ement s ar e speci f i ed i n Sect i on 25 05 11. [ _____] CYBERSECURI TY FOR FACI LI TY- RELATED CONTROL SYSTEMS. Commi ssi oni ng r equi r ement s ar e speci f i ed i n Sect i on 01 91 00. 15 BUI LDI NG COMMI SSI ONI NG.

1. 3 DEFI NI TI ONS

a. Unl ess ot her wi se speci f i ed or i ndi cat ed, el ect r i cal and el ect r oni cs t er ms used i n t hese speci f i cat i ons and on t he dr awi ngs must be as def i ned i n I EEE 100 and ANSI / I ES LS- 1.

b. For LED l umi nai r e l i ght sour ces, " Usef ul Li f e" i s t he oper at i ng hour s bef or e r eachi ng 70 per cent of t he i ni t i al r at ed l umen out put ( L70) wi t h no cat ast r ophi c f ai l ur es under nor mal oper at i ng condi t i ons. Thi s i s al so known as 70 per cent " Rat ed Lumen Mai nt enance Li f e" as def i ned i n ANSI / I ES LM- 80.

c. For LED l umi nai r es, " Lumi nai r e Ef f i cacy" ( LE) i s t he appr opr i at e measur e of ener gy ef f i c i ency, measur ed i n l umens/ wat t . Thi s i s gat her ed f r om LM- 79 dat a f or t he l umi nai r e, i n whi ch absol ut e phot omet r y i s used t o measur e t he l umen out put of t he l umi nai r e as one ent i t y, not t he sour ce separ at el y and t hen t he sour ce and housi ng t oget her .

d. Tot al Har moni c Di st or t i on ( THD) i s t he Root Mean Squar e ( RMS) of al l t he har moni c component s di v i ded by t he t ot al f undament al cur r ent .

e. The " Gr oundl i ne Sect i on" of wood pol es i s t hat por t i on of t he pol e bet ween 305 mm one f oot above, and 610 mm 2 f eet bel ow t he gr oundl i ne.

1. 4 SUBMI TTALS

NOTE: Revi ew Submi t t al Descr i pt i on ( SD) def i ni t i ons i n Sect i on 01 33 00 SUBMI TTAL PROCEDURES and edi t

SECTI ON 26 56 00 Page 11 t he f ol l owi ng l i s t , and cor r espondi ng submi t t al i t ems i n t he t ext , t o r ef l ect onl y t he submi t t al s r equi r ed f or t he pr oj ect . The Gui de Speci f i cat i on t echni cal edi t or s have cl assi f i ed t hose i t ems t hat r equi r e Gover nment appr oval , due t o t hei r compl exi t y or cr i t i cal i t y, wi t h a " G. " Gener al l y, ot her submi t t al i t ems can be r evi ewed by t he Cont r act or ' s Qual i t y Cont r ol Syst em. Onl y add a " G" t o an i t em i f t he submi t t al i s suf f i c i ent l y i mpor t ant or compl ex i n cont ext of t he pr oj ect .

For Ar my pr oj ect s, f i l l i n t he empt y br acket s f ol l owi ng t he " G" c l assi f i cat i on, wi t h a code of up t o t hr ee char act er s t o i ndi cat e t he appr ovi ng aut hor i t y. Codes f or Ar my pr oj ect s usi ng t he Resi dent Management Syst em ( RMS) ar e: " AE" f or Ar chi t ect - Engi neer ; " DO" f or Di st r i ct Of f i ce ( Engi neer i ng Di v i s i on or ot her or gani zat i on i n t he Di st r i ct Of f i ce) ; " AO" f or Ar ea Of f i ce; " RO" f or Resi dent Of f i ce; and " PO" f or Pr oj ect Of f i ce. Codes f ol l owi ng t he " G" t ypi cal l y ar e not used f or Navy and Ai r For ce pr oj ect s.

The " S" c l assi f i cat i on i ndi cat es submi t t al s r equi r ed as pr oof of compl i ance f or sust ai nabi l i t y Gui di ng Pr i nci pl es Val i dat i on or Thi r d Par t y Cer t i f i cat i on and as descr i bed i n Sect i on 01 33 00 SUBMI TTAL

PROCEDURES.

Choose t he f i r st br acket ed i t em f or Navy and Ai r For ce pr oj ect s, or choose t he second br acket ed i t em f or Ar my pr oj ect s.

NOTE: Lumi nai r e shop dr awi ngs ar e r equi r ed f or cust om l umi nai r es, l umi nai r es speci f i ed t o a speci f i c cust om l engt h, or l i near l umi nai r es wi t h l engt hs gr eat er t han 2. 5 met er s 8 f eet .

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" or " S" c l assi f i cat i on. Submi t t al s not havi ng a " G" or " S" c l assi f i cat i on ar e [ f or Cont r act or Qual i t y Cont r ol appr oval . ] [ f or i nf or mat i on onl y. When used, a code f ol l owi ng t he " G" c l assi f i cat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Lumi nai r e Dr awi ngs; G[ , [ _____] ]

Pol e Dr awi ngs; G[ , [ _____] ]

Cont r ol Syst em One- Li ne Di agr am; G[ , [ _____] ]

Sequence of Oper at i on f or Ext er i or Li ght i ng Cont r ol Syst em; G[ , SECTI ON 26 56 00 Page 12

SD- 03 Pr oduct Dat a

Lumi nai r es; G[ , [ _____] ]

Li ght Sour ces; G[ , [ _____] ]

LED Dr i ver s; G[ , [ _____] ]

Lumi nai r e War r ant y; G[ , [ _____] ]

Li ght i ng Cont r ol s War r ant y; G[ , [ _____] ]

Pol e War r ant y; G[ , [ _____] ]

Di mmi ng Panel ; G[ , [ _____] ]

Mot i on Sensor s; G[ , [ _____] ]

Phot osensor s; G[ , [ _____] ]

Ti me Cl ock; G[ , [ _____] ]

Li ght i ng Cont act or ; G[ , [ _____] ]

Pol es; G[ , [ _____] ]

Br acket s

Obst r uct i on Mar ker Lumi nai r es; G[ , [ _____] ]

[ SD- 04 Sampl es

Lumi nai r e Sampl es; G[ , [ _____] ]

] SD- 05 Desi gn Dat a

Lumi nai r e Desi gn Dat a; G[ , [ _____] ]

Phot omet r i c Pl an; G[ , [ _____] ]

SD- 06 Test Repor t s

ANSI / I ES LM- 79 Test Repor t ; G[ , [ _____] ]

ANSI / I ES LM- 80 Test Repor t ; G[ , [ _____] ]

ANSI / I ES TM- 21 Test Repor t ; G[ , [ _____] ]

Pr essur e Tr eat ed Wood Pol e Qual i t y; G[ , [ _____] ]

Test s f or Fi ber gl ass Pol es; G[ , [ _____] ]

SD- 08 Manuf act ur er ' s I nst r uct i ons

Pol es

SD- 10 Oper at i on and Mai nt enance Dat a

Li ght i ng Syst em, Dat a Package 5; G[ , [ _____] ]

SECTI ON 26 56 00 Page 13

Ext er i or Li ght i ng Cont r ol Syst em, Dat a Package 5; G[ , [ _____] ]

Mai nt enance St af f Tr ai ni ng Pl an; G[ , [ _____] ]

End- User Tr ai ni ng Pl an; G[ , [ _____] ]

1. 5 QUALI TY ASSURANCE

Dat a, dr awi ngs, and r epor t s must empl oy t he t er mi nol ogy, c l assi f i cat i ons and met hods pr escr i bed by t he I ES Li ght i ng Li br ar y as appl i cabl e, f or t he l i ght i ng syst em speci f i ed.

1. 5. 1 Dr awi ng Requi r ement s

1. 5. 1. 1 Lumi nai r e Dr awi ngs

NOTE: EPA and wei ght must be i ncl uded i n t he l umi nai r e dr awi ngs f or pol e- mount ed l umi nai r es.

Ai mi ng di agr ams ar e r equi r ed f or appl i cat i ons wi t h di r ect i onal l umi nai r es, such as adj ust abl e l andscape and t r ee l i ght i ng, spor t s l i ght i ng, and wal l wash appl i cat i ons.

I ncl ude di mensi ons, [ ef f ect i ve pr oj ect ed ar ea ( EPA) , wei ght , ] accessor i es, and i nst al l at i on and const r uct i on det ai l s. Phot omet r i c dat a, i ncl udi ng CRI , CCT, TM- 15- 11 BUG r at i ng, LED dr i ver t ype, [ ai mi ng di agr am, ] zonal l umen dat a, and candl epower di st r i but i on dat a per LM- 79 must accompany shop dr awi ngs.

1. 5. 1. 2 Pol e Dr awi ngs

NOTE: Wi nd l oads f or r oadway l umi nai r es ar e def i ned by AASHTO LTS. For ot her non- r oadway pol es, use

ASCE 7- 16.

I ncl ude di mensi ons, wi nd l oad det er mi ned i n accor dance wi t h [ AASHTO LTS] [ ASCE 7- 16] , pol e def l ect i on, pol e c l ass, and ot her appl i cabl e i nf or mat i on. [ For concr et e pol es, i ncl ude: sect i on and det ai l s t o i ndi cat e quant i t i es and posi t i on of pr est r essi ng st eel , spi r al st eel , i nser t s, and t hr ough hol es; i ni t i al pr est r essi ng st eel t ensi on; and concr et e st r engt hs at r el ease and at 28 days. ]

1. 5. 2 Lumi nai r e Desi gn Dat a

a. Pr ovi de di st r i but i on dat a accor di ng t o I ES cl assi f i cat i on t ype as def i ned i n I ES Li ght i ng Li br ar y and ANSI / I ES RP- 8.

b. B. U. G. r at i ng f or t he i nst al l ed posi t i on as def i ned by ANSI / I ES TM- 15 and shi el di ng as def i ned by ANSI / I ES RP- 8.

c. Pr ovi de saf et y cer t i f i cat i on and f i l e number f or t he l umi nai r e f ami l y. I ncl ude l i s t i ng, l abel i ng and i dent i f i cat i on i n accor dance wi t h NFPA 70 ( NEC) . Appl i cabl e t est i ng bodi es ar e det er mi ned by t he

SECTI ON 26 56 00 Page 14

US Occupat i onal Saf et y Heal t h Admi ni st r at i on ( OSHA) as Nat i onal l y Recogni zed Test i ng Labor at or i es ( NRTL) and i ncl ude: CSA ( Canadi an St andar ds Associ at i on) , ETL ( Edi son Test i ng Labor at or y) , and UL ( Under wr i t er s Labor at or i es) .

d. Pr ovi de l ong t er m l umen mai nt enance pr oj ect i ons f or each LED l umi nai r e i n accor dance wi t h ANSI / I ES TM- 21. Dat a used f or pr oj ect i ons must be obt ai ned f r om t est i ng i n accor dance wi t h ANSI / I ES LM- 80.

e. Pr ovi de wi nd l oadi ng cal cul at i ons f or l umi nai r es mount ed on pol es.

Wei ght and ef f ect i ve pr oj ect ed ar ea ( EPA) of l umi nai r es and mount i ng br acket s must not exceed maxi mum r at i ng of pol e as i nst al l ed i n par t i cul ar wi nd zone ar ea.

1. 5. 3 ANSI / I ES LM- 79 Test Repor t

Submi t t est r epor t on manuf act ur er ' s st andar d pr oduct i on model of speci f i ed l umi nai r e. Test i ng must be per f or med at t he same oper at i ng dr i ve cur r ent as speci f i ed l umi nai r e. I ncl ude al l appl i cabl e and r equi r ed dat a as out l i ned under " 14. 0 Test Repor t " i n ANSI / I ES LM- 79.

1. 5. 4 ANSI / I ES LM- 80 Test Repor t

Submi t r epor t on manuf act ur er ' s st andar d pr oduct i on LED l i ght sour ce ( package, ar r ay, or modul e) of speci f i ed l umi nai r e. Test i ng must be per f or med at t he same oper at i ng dr i ve cur r ent as speci f i ed l umi nai r e.

I ncl ude al l appl i cabl e and r equi r ed dat a as out l i ned under " 8. 0 Test Repor t " i n ANSI / I ES LM- 80.

1. 5. 5 ANSI / I ES TM- 21 Test Repor t

Submi t t est r epor t on manuf act ur er ' s st andar d pr oduct i on LED l i ght sour ce ( package, ar r ay or modul e) of speci f i ed l umi nai r e. Test i ng must be per f or med at t he same oper at i ng dr i ve cur r ent as speci f i ed l umi nai r e.

I ncl ude al l appl i cabl e and r equi r ed dat a, as wel l as r equi r ed i nt er pol at i on i nf or mat i on as out l i ned under " 7. 0 Repor t " i n ANSI / I ES TM- 21.

1. 5. 6 Test s f or Fi ber gl ass Pol es

a. Ul t r avi ol et r esi st ance t est s: Per f or m accor di ng t o ASTM G154 usi ng a UV- B l i ght sour ce havi ng a 313 nanomet er wavel engt h, oper at ed at 54 degr ees C 130 degr ees F, cycl i ng t he l i ght sour ce on f or 4 hour s and of f f or 4 hour s f or a t ot al t est per i od of 1500 hour s mi ni mum wi t h t he f ol l owi ng r esul t s:

Fi ber exposur e: None

Cr azi ng: None

Checki ng: None

Chal ki ng: None

Col or : May dul l s l i ght l y

b. Fl exur al st r engt h and def l ect i on t est : Test l oadi ng must be as a cant i l ever beam wi t h pol e but t as f i xed end and a f or ce s i mul at i ng wi nd l oad at t he f r ee end.

SECTI ON 26 56 00 Page 15

1. 5. 7 Pr essur e Tr eat ed Wood Pol e Qual i t y

Ensur e t he qual i t y of pr essur e t r eat ed wood pol es. Fur ni sh an i nspect i on r epor t ( f or wood pol es) of an i ndependent i nspect i on agency, appr oved by t he Cont r act i ng Of f i cer , st at i ng t hat of f er ed pr oduct s compl y wi t h AWPA U1 and RUS Bul l 1728F- 700 st andar ds. The RUS appr oved Qual i t y Mar k " WQC" on each pol e wi l l be accept ed, i n l i eu of i nspect i on r epor t s, as evi dence of compl i ance wi t h appl i cabl e AWPA t r eat ment st andar ds.

[ 1. 5. 8 Phot omet r i c Pl an

NOTE: Requi r e phot omet r i c pl ans and desi gn cr i t er i a t o be submi t t ed i f t he pr oj ect i s a Desi gn- Bui l d pr oj ect and wi l l not have an engi neer or desi gner pr oduci ng phot omet r i cs dur i ng desi gn.

Sel ect ANSI / I ES RP- 8 f or r oadway and par ki ng f aci l i t i es phot omet r i c pl ans and ANSI / I ES LP- 11 f or al l ot her ext er i or envi r onment scenar i os.

For r oadway desi gns, r equi r e aver age mai nt ai ned l umi nance.

For [ r oadways] [ par ki ng l ot s] [ i nt er sect i ons] [ _____] i ncl ude comput er - gener at ed phot omet r i c anal ysi s of t he " desi gned t o" val ues i n accor dance wi t h [ ANSI / I ES RP- 8] [ ANSI / I ES LP- 11] f or t he " end of usef ul l i f e" of t he l umi nai r e i nst al l at i on usi ng a l i ght l oss f act or of 0. 81.

Pr ovi de phot omet r i c pl ans t hat meet cr i t er i a i n t he Basi s of Desi gn i n t he pr oj ect pl ans. I ncl ude t he f ol l owi ng i n t he submi t t al :

a. Hor i zont al i l l umi nance measur ement s at f i ni shed gr ade, t aken at a maxi mum gr i d s i ze of 3050 mm 10 f eet by 3050 mm 10 f eet .

b. Ver t i cal i l l umi nance measur ement s at 1500 mm 5 f eet above f i ni shed gr ade at al l s i dewal ks and cr osswal ks, t aken at a maxi mum of 3050 mm 10 f eet .

c. Mi ni mum and maxi mum l ux f oot candl e l evel s.

d. Aver age mai nt ai ned l ux f oot candl e l evel .

e. Maxi mum t o mi ni mum r at i o f or hor i zont al i l l umi nance onl y.

[ f . Aver age mai nt ai ned l umi nance i n candel a per squar e met er .

] ] 1. 5. 9 Test Labor at or i es

Test l abor at or i es f or t he ANSI / I ES LM- 79 and ANSI / I ES LM- 80 t est r epor t s must be one of t he f ol l owi ng:

a. Nat i onal Vol unt ar y Labor at or y Accr edi t at i on Pr ogr am ( NVLAP) accr edi t ed f or sol i d- st at e l i ght i ng t est i ng as par t of t he Ener gy- Ef f i c i ent Li ght i ng Pr oduct s l abor at or y accr edi t at i on pr ogr am.

b. One of t he qual i f i ed l abs l i s t ed on t he Depar t ment of Ener gy - Ener gy Ef f i c i ency & Renewabl e Ener gy, Sol i d- St at e Li ght i ng web si t e.

SECTI ON 26 56 00 Page 16

c. One of t he EPA- Recogni zed Labor at or i es l i s t ed at f or LM- 80 t est i ng.

1. 5. 10 Regul at or y Requi r ement s

Equi pment , mat er i al s, i nst al l at i on, and wor kmanshi p must be i n accor dance wi t h t he mandat or y pr ovi s i ons of NFPA 70 unl ess mor e st r i ngent r equi r ement s ar e speci f i ed or i ndi cat ed. Pr ovi de l umi nai r es and assembl ed component s t hat ar e appr oved by and bear t he l abel of UL f or t he appl i cabl e l ocat i on and condi t i ons unl ess ot her wi se speci f i ed.

1. 5. 11 St andar d Pr oduct s

Pr ovi de mat er i al s and equi pment t hat ar e pr oduct s of manuf act ur er s r egul ar l y engaged i n t he pr oduct i on of such pr oduct s whi ch ar e of equal mat er i al , desi gn and wor kmanshi p. Pr oduct s must have been i n sat i sf act or y commer ci al or i ndust r i al use f or s i x mont hs pr i or t o bi d openi ng. The si x- mont h per i od must i ncl ude appl i cat i ons of equi pment and mat er i al s under s i mi l ar c i r cumst ances and of s i mi l ar s i ze. The pr oduct must have been on sal e on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es dur i ng t he si x- mont h per i od. Wher e t wo or mor e i t ems of t he same cl ass of equi pment ar e r equi r ed, t hese i t ems must be pr oduct s of a s i ngl e manuf act ur er ; however , t he component par t s of t he i t em need not be t he pr oduct s of t he same manuf act ur er unl ess st at ed i n t hi s sect i on.

1. 5. 11. 1 Al t er nat i ve Qual i f i cat i ons

Pr oduct s havi ng l ess t han a s i x- mont h f i el d ser vi ce r ecor d wi l l be accept abl e i f a cer t i f i ed r ecor d of sat i sf act or y f i el d oper at i on f or not l ess t han 6000 hour s, excl usi ve of t he manuf act ur er s ' f act or y or l abor at or y t est s, i s f ur ni shed.

1. 5. 11. 2 Mat er i al and Equi pment Manuf act ur i ng Dat e

Do not use pr oduct s manuf act ur ed mor e t han si x mont hs pr i or t o dat e of del i ver y t o s i t e, unl ess speci f i ed ot her wi se.

1. 6 DELI VERY, STORAGE, AND HANDLI NG OF POLES

1. 6. 1 Al umi num Pol es

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east 305 mm one f oot above gr ound l evel and gr owi ng veget at i on. Do not r emove f act or y- appl i ed pol e wr appi ngs unt i l j ust bef or e i nst al l i ng pol e.

1. 6. 2 St eel Pol es

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east 305 mm one f oot above gr ound l evel and gr owi ng veget at i on. Do not r emove f act or y- appl i ed pol e wr appi ngs unt i l j ust bef or e i nst al l i ng pol e.

1. 6. 3 Wood Pol es

Do not st or e pol es on gr ound. St ack pol es st or ed f or mor e t han 2 weeks on decay- r esi st i ng ski ds ar r anged t o suppor t t he pol es wi t hout pr oduci ng not i ceabl e di st or t i on. St or e pol es t o per mi t f r ee c i r cul at i on of ai r ; t he bot t om pol es i n t he st ack must be at l east 305 mm one f oot above gr ound l evel and gr owi ng veget at i on. Do not per mi t decayed or decayi ng wood t o

SECTI ON 26 56 00 Page 17 r emai n under neat h st or ed pol es. Do not dr ag t r eat ed pol es al ong t he gr ound. Do not use pol e t ongs, cant hooks, and ot her poi nt ed t ool s capabl e of pr oduci ng i ndent at i on mor e t han 25 mm one i nch i n dept h i n handl i ng t he pol es. Do not appl y t ool s t o t he gr oundl i ne sect i on of any pol e.

1. 6. 4 Fi ber gl ass Pol es

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east 305 mm one f oot above gr ound l evel and gr owi ng veget at i on. Do not r emove f act or y- appl i ed pol e wr appi ngs unt i l j ust bef or e i nst al l i ng pol e.

1. 6. 5 Concr et e Pol es

Do not st or e pol es on gr ound. Suppor t pol es so t hey ar e at l east 305 mm one f oot above gr ound l evel and gr owi ng veget at i on.

1. 7 WARRANTY

Suppor t al l equi pment i t ems by ser vi ce or gani zat i ons whi ch ar e r easonabl y conveni ent t o t he equi pment i nst al l at i on i n or der t o r ender sat i sf act or y ser vi ce t o t he equi pment on a r egul ar and emer gency basi s dur i ng t he war r ant y per i od of t he cont r act .

1. 7. 1 Lumi nai r e War r ant y

Pr ovi de and t r ansf er t o t he gover nment t he or i gi nal LED l umi nai r e manuf act ur er s st andar d commer ci al war r ant y f or each di f f er ent l umi nai r e manuf act ur er used i n t he pr oj ect .

a. Pr ovi de a wr i t t en f i ve year mi ni mum r epl acement war r ant y f or mat er i al , l umi nai r e f i ni sh, and wor kmanshi p. Pr ovi de wr i t t en war r ant y document t hat cont ai ns al l war r ant y pr ocessi ng i nf or mat i on needed, i ncl udi ng cust omer ser vi ce poi nt of cont act , whet her or not a r et ur n aut hor i zat i on number i s r equi r ed, r et ur n shi ppi ng i nf or mat i on, and cl osest r et ur n l ocat i on t o t he l umi nai r e l ocat i on.

( 1) Fi ni sh war r ant y must i ncl ude f ai l ur e and subst ant i al det er i or at i on such as bl i st er i ng, cr acki ng, peel i ng, chal k i ng, or f adi ng.

( 2) Mat er i al war r ant y must i ncl ude:

( a) Al l LED dr i ver s and i nt egr al cont r ol equi pment .

( b) Repl acement when mor e t han 15 per cent of LED sour ces i n any l i ght bar or subassembl y( s) ar e def ect i ve, non- st ar t i ng, or oper at i ng bel ow 70 per cent of speci f i ed l umen out put .

b. War r ant y per i od must begi n i n accor dance wi t h t he manuf act ur er ' s st andar d war r ant y st ar t i ng dat e.

c. Pr ovi de r epl acement s t hat ar e pr ompt l y shi pped, wi t hout char ge, t o t he usi ng Gover nment f aci l i t y poi nt of cont act and t hat ar e i dent i cal t o or an i mpr ovement upon t he or i gi nal equi pment . Al l r epl acement s must i ncl ude t est i ng of new component s and i nst al l at i on.

1. 7. 2 Li ght i ng Cont r ol s War r ant y

Pr ovi de and t r ansf er t o t he gover nment t he or i gi nal l i ght i ng cont r ol s

SECTI ON 26 56 00 Page 18 manuf act ur er s st andar d commer ci al war r ant y f or each di f f er ent l i ght i ng cont r ol s manuf act ur er used i n t he pr oj ect . War r ant y cover age must begi n f r om dat e of f i nal syst em commi ssi oni ng or t hr ee mont hs f r om dat e of del i ver y, whi chever i s t he ear l i est . War r ant y ser vi ce must be per f or med by a f act or y- t r ai ned engi neer or t echni c i an.

a. Unl ess ot her wi se not ed, pr ovi de a wr i t t en f i ve year mi ni mum war r ant y on t he compl et e syst em f or al l syst ems wi t h f act or y commi ssi oni ng.

Pr ovi de war r ant y t hat cover s 100 per cent of t he cost of any r epl acement par t s and ser vi ces r equi r ed over t he f i ve year s whi ch ar e di r ect l y at t r i but abl e t o t he pr oduct f ai l ur e. Fai l ur es i ncl ude, but ar e not l i mi t ed t o, t he f ol l owi ng:

( 1) Sof t war e: Fai l ur e of i nput / out put t o execut e swi t chi ng or di mmi ng commands.

( 2) Damage of el ect r oni c component s due t o t r ansi ent vol t age sur ges.

( 3) Fai l ur e of cont r ol devi ces, i ncl udi ng but not l i mi t ed t o phot osensor s and mot i on sensor s.

b. Pr ovi de a wr i t t en f i ve year mi ni mum war r ant y on al l i nput devi ces agai nst def ect i n wor kmanshi p or mat er i al s pr ovi ded by devi ce manuf act ur er .

c. Pr ovi de a wr i t t en f i ve year mi ni mum war r ant y on al l cont r ol component s at t ached t o l umi nai r es agai nst def ect i n wor kmanshi p or mat er i al s.

1. 7. 3 Pol e War r ant y

NOTE: Thr ee year pol e war r ant y i s pr ef er r ed.

Sel ect one year when t hr ee year s i s not avai l abl e.

Pr ovi de and t r ansf er t o t he gover nment t he or i gi nal pol e manuf act ur er s st andar d commer ci al war r ant y f or each di f f er ent pol e manuf act ur er used i n t he pr oj ect . War r ant y cover age must begi n f r om dat e of f i nal syst em commi ssi oni ng or t hr ee mont hs f r om dat e of del i ver y, whi chever i s t he ear l i est . Pr ovi de a wr i t t en [ 3] [ one] year mi ni mum r epl acement war r ant y f or mat er i al , l umi nai r e f i ni sh, and wor kmanshi p. War r ant y ser vi ce must be per f or med by a f act or y- t r ai ned engi neer or t echni c i an.

1. 8 OPERATI ON AND MAI NTENANCE MANUALS

1. 8. 1 Li ght i ng Syst em

Pr ovi de oper at i on and mai nt enance manual s f or t he l i ght i ng syst em i n accor dance wi t h Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA t hat pr ovi de basi c dat a r el at i ng t o t he desi gn, oper at i on, and mai nt enance of t he l i ght i ng syst em. Addi t i onal O&M Manual r equi r ement s f or t he Ar my ar e pr ovi ded i n Sect i on 01 78 24. 00 10 FACI LI TY DATA REQUI REMENTS. Addi t i onal r equi r ement s f or t he Navy ar e pr ovi ded i n Sect i on 01 78 24. 00 20 FACI LI TY DATA WORKBOOK ( FDW) . I ncl ude t he f ol l owi ng:

a. Manuf act ur er s ' oper at i ng and mai nt enance manual s.

b. Lumi nai r e shop dr awi ngs f or modi f i ed and cust om l umi nai r es.

SECTI ON 26 56 00 Page 19

c. Lumi nai r e Manuf act ur er s ' st andar d commer ci al war r ant y i nf or mat i on as speci f i ed i n par agr aph LUMI NAI RE WARRANTY.

1. 8. 2 Ext er i or Li ght i ng Cont r ol Syst em

Pr ovi de oper at i on and mai nt enance manual s f or t he ext er i or l i ght i ng cont r ol syst em i n accor dance wi t h Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA t hat pr ovi de basi c dat a r el at i ng t o t he desi gn, oper at i on, and mai nt enance of t he ext er i or l i ght i ng cont r ol syst em.

I ncl ude t he f ol l owi ng:

a. Cont r ol Syst em One- Li ne Di agr am

b. Pr oduct dat a f or al l devi ces, i ncl udi ng i nst al l at i on and pr ogr ammi ng i nst r uct i ons.

c. Tr ai ni ng mat er i al s, such as v i deos or i n- dept h manual s, t hat cover basi c oper at i on of t he l i ght i ng cont r ol syst em and i nst r uct i ons on modi f y i ng t he cont r ol syst em. Tr ai ni ng mat er i al s must i ncl ude cal i br at i on, adj ust ment , t r oubl eshoot i ng, mai nt enance, r epai r , and r epl acement .

[ d. Mot i on sensor cover age l ayout .

] PART 2 PRODUCTS

2. 1 PRODUCT COORDI NATI ON

2. 2 LUMI NAI RES

NOTE: Onl y r equi r e t he acqui s i t i on of sampl es f or l umi nai r e i nst al l at i ons t hat war r ant mock- ups, such as wal l gr azi ng uni que mat er i al s, or f or appl i cat i ons wher e aest het i cs ar e of hi gh pr i or i t y.

UL 1598, NEMA C82. 77- 10. Pr ovi de l umi nai r es as i ndi cat ed i n t he l umi nai r e schedul e and XL pl at es or det ai l s on pr oj ect pl ans, compl et e wi t h l i ght sour ce, wat t age, and l umen out put i ndi cat ed. Al l l umi nai r es of t he same t ype must be pr ovi ded by t he same manuf act ur er . Lumi nai r es must be speci f i cal l y desi gned f or use wi t h t he LED dr i ver and l i ght sour ce pr ovi ded.

[ 2. 2. 1 Lumi nai r e Sampl es

NOTE: Onl y r equi r e t he acqui s i t i on of sampl es f or l umi nai r e i nst al l at i ons t hat war r ant mock- ups, such as wal l gr azi ng uni que mat er i al s, f or cust om l umi nai r es, or f or appl i cat i ons wher e aest het i cs ar e of hi gh pr i or i t y.

Submi t one sampl e of each l umi nai r e t ype [ _____] , compl et e wi t h l i ght sour ce and LED dr i ver r at ed f or 120 V oper at i on, and 2 met er s 6 f eet pi gt ai l wi t h 3- pr ong Edi son pl ug. Sampl e wi l l be r et ur ned t o t he Cont r act or f or i nst al l at i on i n t he pr oj ect wor k.

SECTI ON 26 56 00 Page 20

] 2. 2. 2 Lumi nai r es

NOTE: 40 degr ees C 104 degr ees F i s " st andar d" upper l evel r at i ng of most LED l umi nai r es. Choose hi gher 50 degr ees C 122 degr ees F r at i ng when an i nst al l at i on l ocat i on war r ant s a hi gher ambi ent t emper at ur e r at i ng and t he addi t i onal cost i t i ncur s.

Pr ovi de desi gn i nf or mat i on i ncl udi ng del i ver ed l umen out put , L70 l umen mai nt enance dat a, and l umi nai r e ef f i cacy i n l umi nai r e schedul e on pr oj ect pl ans.

UL 8750, ANSI / I ES LM- 79, ANSI / I ES LM- 80. For al l l umi nai r es, pr ovi de:

a. Compl et e syst em wi t h LED dr i ver s and l i ght sour ces.

b. Housi ng const r uct ed of non- cor r osi ve mat er i al s. Al l new al umi num housi ngs must be anodi zed or powder - coat ed. Al l new st eel housi ngs must be t r eat ed t o be cor r osi on r esi st ant .

c. ANSI / I ES TM- 21, ANSI / I ES LM- 80. Mi ni mum L70 l umen mai nt enance val ue of 50, 000 hour s unl ess ot her wi se i ndi cat ed i n t he l umi nai r e schedul e.

Lumi nai r e dr i ve cur r ent val ue must be i dent i cal t o t hat pr ovi ded by t est dat a f or l umi nai r e i n quest i on.

d. Mi ni mum ef f i cacy as speci f i ed i n t he l umi nai r e schedul e. Theor et i cal model s of i ni t i al l amp l umens per wat t ar e not accept abl e. I f ef f i cacy val ues ar e not l i s t ed i n t he l umi nai r e schedul e, pr ovi de l umi nai r es t hat meet t he f ol l owi ng mi ni mum val ues:

Lumi nai r e St yl e Mi ni mum Lumi nai r e Ef f i cacy

Ar ea and Roadway ( pol e mount ed, ar m mount ed)

119 LPW

Pedest r i an Post - Top ( pol e mount ed, ar m mount ed)

97 LPW

Bol l ar d 45 LPW

Accent ( adj ust abl e l andscape, s i gn l i ght i ng) 35 LPW

Li near Accent ( f acade, wal l wash) 80 LPW

Ext er i or Wal l Sconce 50 LPW

St epl i ght 30 LPW

Par ki ng Gar age Lumi nai r e 113 LPW

e. Pr oduct r at ed f or oper at i on wi t hi n an ambi ent t emper at ur e r ange of mi nus 30 degr ees C mi nus 22 degr ees F t o[ 40 degr ees C 104 degr ees F] [ 50 degr ees C 122 degr ees F] .

f . UL l i s t ed f or wet l ocat i ons. [ Opt i cal compar t ment f or LED l umi nai r es must be seal ed and r at ed a mi ni mum of I P65 per NEMA I EC 60529. ]

SECTI ON 26 56 00 Page 21

g. I ES Li ght i ng Li br ar y. Li ght di st r i but i on and NEMA f i el d angl e c l assi f i cat i ons as i ndi cat ed i n l umi nai r e schedul e on pr oj ect pl ans.

h. Housi ng f i ni sh t hat i s baked- on enamel , anodi zed, or baked- on powder coat pai nt . Fi ni sh must be capabl e of sur vi v i ng ASTM B117 sal t f og envi r onment t est i ng f or 2500 hour s mi ni mum wi t hout bl i st er i ng or peel i ng.

i . LED dr i ver and l i ght sour ce package, ar r ay, or modul e ar e accessi bl e f or ser vi ce or r epl acement wi t hout r emoval or dest r uct i on of l umi nai r e.

j . ANSI / I ES TM- 15. Does not exceed t he BUG r at i ngs as l i s t ed i n t he l umi nai r e schedul e. I f BUG r at i ngs ar e not l i s t ed i n t he l umi nai r e schedul e, pr ovi de l umi nai r es t hat meet t he f ol l owi ng mi ni mum val ues f or each appl i cat i on and mount i ng condi t i ons:

Li ght i ng Appl i cat i on Mount i ng Condi t i ons BUG Rat i ng

Ar ea and Roadway Al l B3- U0- G3

Pedest r i an Post - Top Al l B2- U1- G1

Ext er i or Wal l Sconce Above 1. 2 met er s 4 f eet AFF B1- U0- G2

Ext er i or Wal l Sconce Bel ow or at 1. 2 met er s 4 f eet AFF B4- U0- G4

St epl i ght Above 1. 2 met er s 4 f eet AFF B1- U1- G2

St epl i ght Bel ow or at 1. 2 met er s 4 f eet AFF B4- U1- G4

Par ki ng Gar age Lumi nai r e Cei l i ng mount ed B4- U4- G3

k. Ful l y assembl ed and el ect r i cal l y t est ed pr i or t o shi pment f r om f act or y.

l . Fi ni sh col or i s as i ndi cat ed i n t he l umi nai r e schedul e or det ai l on t he pr oj ect pl ans.

m. Lenses const r uct ed of [ c l ear ] [ f r ost ed] t emper ed gl ass or UV- r esi st ant acr yl i c. [ Pr ovi de pol ycar bonat e vandal - r esi st ant l enses. ]

n. Al l f act or y el ect r i cal connect i ons ar e made usi ng cr i mp, l ocki ng, or l at chi ng st y l e connect or s. Twi st - st y l e wi r e nut s ar e not accept abl e.

o. NEMA C136. 31. Compl y wi t h 3G vi br at i on t est i ng.

[ p. Lumi nai r e ar m bol t s const r uct ed f r om 304 st ai nl ess st eel or z i nc- pl at ed st eel .

] [ q. Wi r i ng compar t ment on pol e- mount ed, st r eet and ar ea l umi nai r es i s accessi bl e wi t hout t he use of hand t ool s t o mani pul at e smal l scr ews, bol t s, or har dwar e.

] [ r . I ncor por at e modul ar el ect r i cal connect i ons, and const r uct l umi nai r es t o al l ow r epl acement of al l or any par t of t he opt i cs, heat s i nks, LED dr i ver s, sur ge suppr essor s and ot her el ect r i cal component s usi ng onl y a s i mpl e t ool , such as a manual or cor dl ess el ect r i c scr ewdr i ver .

SECTI ON 26 56 00 Page 22

] [ s. ANSI C136. 3. For al l r oadway and ar ea l umi nai r es, pr ovi de pr oduct s wi t h an i nt egr al t i l t adj ust ment of pl us or mi nus 5 degr ees t o al l ow t he uni t t o be l evel ed.

] [ 2. 2. 3 Obst r uct i on Mar ker Lumi nai r es

NOTE: Do not use LED obst r uct i on l umi nai r es f or Ai r For ce pr oj ect s. See Ai r For ce ETL 11- 29 " Use of Li ght - Emi t t i ng Di ode ( LED) Fi xt ur es i n Ai r f i el d Li ght i ng Syst ems on Ai r For ce I nst al l at i ons and Endur i ng/ Cont i ngency Locat i ons" f or mor e i nf or mat i on.

Pr ovi de obst r uct i on mar ker l umi nai r es f or f aci l i t i es as r equi r ed by t he FAA and i n accor dance wi t h Sect i on 26 56 20 AI RFI ELD AND HELI PORT LI GHTI NG

AND VI SUAL NAVI GATI ON AI DS.

] 2. 3 LI GHT SOURCES

NEMA ANSLG C78. 377, NEMA SSL 3. Pr ovi de t ype, l umen r at i ng, and wat t age as i ndi cat ed i n l umi nai r e schedul e on pr oj ect pl ans.

2. 3. 1 LED Li ght Sour ces

NOTE: A col or t emper at ur e of 3000 K i s st andar d f or most appl i cat i ons. When speci f i cal l y desi r ed by t he desi gner , a nomi nal col or t emper at ur e of 2700 K, 3500 K, or 4000 K may be sel ect ed. The hi ghest al l owabl e CCT i s 4100 K.

For ar ea and r oadway pr oj ect s wher e col or det ect i on i s not of hi gh i mpor t ance, sel ect a CRI of 70.

Pr ovi de LED l i ght sour ces t hat meet t he f ol l owi ng r equi r ement s:

a. NEMA ANSLG C78. 377. Emi t whi t e l i ght and have a nomi nal Cor r el at ed Col or Temper at ur e ( CCT) of [ 3000] [ 2700] [ 3500] [ 4000] Kel v i n.

b. Mi ni mum Col or Render i ng I ndex ( CRI ) of [ 80] [ 70] .

c. Di r ect i ve 2011/ 65/ EU. Rest r i ct i on of Hazar dous Subst ances ( RoHS) compl i ant .

d. Li ght sour ce col or consi st ency by ut i l i z i ng a bi nni ng t ol er ance wi t hi n a 4- st ep McAdam el l i pse.

2. 4 LED DRI VERS

NOTE: 40 degr ees C 104 degr ees F i s " st andar d" upper l evel r at i ng of most LED l umi nai r es. Choose hi gher 50 degr ees C 122 degr ees F r at i ng when an i nst al l at i on l ocat i on war r ant s a hi gher ambi ent t emper at ur e r at i ng and t he addi t i onal cost i t i ncur s.

Requi r e a di mmabl e dr i ver f or al l ext er i or l i ght i ng

SECTI ON 26 56 00 Page 23 t hat wi l l be r educed at cur f ew i n accor dance wi t h t he l i ght i ng cont r ol st r at egi es i n t he pr oj ect pl ans.

NEMA SSL 1, UL 1310. Pr ovi de LED Dr i ver s t hat ar e el ect r oni c, UL Cl ass 1 or Cl ass 2, const ant - cur r ent t ype and meet t he f ol l owi ng r equi r ement s:

a. The combi ned LED dr i ver and LED l i ght sour ce syst em i s gr eat er t han or equal t o t he mi ni mum l umi nai r e ef f i cacy val ues as l i s t ed i n t he l umi nai r e schedul e pr ovi ded.

b. Oper at e at a vol t age of [ 120- 277] [ 120] [ 277] vol t s at 50/ 60 her t z, wi t h i nput vol t age f l uct uat i ons of pl us or mi nus 10 per cent .

c. Power Fact or ( PF) gr eat er t han or equal t o 0. 90 at f ul l i nput power and acr oss speci f i ed di mmi ng r ange.

d. Maxi mum Tot al Har moni c Di st or t i on ( THD) l ess t han or equal t o 20 per cent at f ul l i nput power and acr oss speci f i ed di…