Tech_PG8AC_Condenser_Cleaning_1.1_spec_d.pdf
PDF 640 KB Posted
- Attached to
- Water Cooler Filter Replacement -Term Contract
- Solicitation number
- 052-MJ-0425
- Issued by
- Polk County, Florida
About this file
This document is a technical instruction manual from Oasis Coolers detailing the process for cleaning the condenser on a PG8AC water cooler. The manual provides step-by-step guidance for maintenance professionals or technicians, focusing specifically on how to access and clean the condenser to maintain optimal cooling system performance.
The document outlines the importance of condenser maintenance, explaining that dust, dirt, and debris can dramatically reduce the efficiency of the cooling system. The cleaning process requires two tools: a T-15 Torx bit and a shop vac. The instructions include removing the front and right side panels to access the condenser, then using the shop vac to thoroughly clean the condenser coils. After cleaning, the panels should be replaced, which should restore the unit to peak performance. Technical support is available by calling 1-800-646-2747 or emailing techserv@oasiscoolers.com.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Cleaning the Condenser on a
PG8AC
Tools Required
• T-15 Torx Bit
• Shop vac
What does the Condenser do?
As the fan motor cycles it will draw air through the louvered side panel and across the condenser, this will dissipate the heat produced from the cooling system and keeps the unit operating at an optimal performance level
The Condenser will always be located on the right hand side of the cooler.
Air Flow Air Flow
Clean Condenser
Air Flow
Dirty Condenser Will Affect Performance
When the condenser gets clogged with dust, dirt and debris, this will have a dramatic effect on the efficiency of the cooling system.
Accessing the Condenser
Remove the front panel by loosening 2 screws at the bottom and taking out the 2 screws at the top of the panel
Loosen
Remove Loosen
Remove
Remove the right side panel by loosening 2 screws at the top and taking out the 2 screws at the bottom of the panel
Cleaning the Condenser
Use your shop vac to remove any dirt, dust or debris that may be trapped in the condenser coils. Once this has been thoroughly cleaned replace the side and front panels.
With a clean condenser the unit should be operating a peak performance
Technical Support
Call 1-800-646-2747
Or email at techserv@oasiscoolers.com
| Slide 1 |
| Slide 2 |
| Slide 3 |
| Slide 4 |
| Slide 5 |
| Slide 6 |
| Slide 7 |
File details come from the government source that posted it. Updated .