TDP 2 Excerpt Pages 1-8 from 1-1520-280-50-19- MWO UH-60M ASDC VERIFIED DRAFT_OCT_12_2018.pdf

-M

AR-20

EXCERPTED

ROUTINE

MWO effective date is dd mmm yyyy and completion date is dd mmm yyyy.

MWO 1-1520-280-50-19

MODIFICATION WORK ORDER

MODIFICATION INSTRUCTIONS FOR THE INSTALLATION OF ADVANCED

SIGHT AND DISPLAY COMPUTER (ASDC) ON THE UH-60M AIRCRAFT

(NSN 1520-01-492-6324) (EIC RSP)

U.S. Army Aviation and Missile Command, REDSTONE ARSENAL, AL 35898 12-October-2018

REPORTING OF ERRORS AND RECOMMENDING IMPROVEMENTS

You can help improve this MWO. If you find any errors or if you know of a way to improve these procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to Publications and Blank Forms), directly to: Commander, U.S. Army Aviation and Missile Command, ATTN: AMSAM-MLD-MT, Redstone Arsenal, AL 35898-5000. A reply will be furnished to you. You may also provide DA Form 2028 information to AMCOM via e-mail, fax or the World Wide Web. Our fax number is: DSN 788-6546 or Commercial (256) 842-6546. Our e-mail address is 2028@redstone.army.mil. Instructions for sending an electronic 2028 can be found at the back of this manual. For the World Wide Web use: https://amcom2028.redstone.army.mil

AVAILABILITY NOTICE - This publication is not available through U.S. Army Publication Distribution Center. It must be obtained from U.S. Army Aviation and Missile Command, ATTN: AMSAM-MLD-MT, Redstone Arsenal, AL 35898-5000.

DISTRIBUTION STATEMENT D - Distribution authorized to the Department of Defense and U.S. DoD contractors only to protect technical or operational data or information from automatic dissemination under the International Exchange Program or by other means. This protection covers publications required solely for official use or strictly for administrative or operational purposes. This statement may be applied to manuals, pamphlets, technical orders, technical reports, and other publications containing valuable technical or operational data (23 February 2012 ). Other requests shall be referred to Product Manager (PM) Air Warrior (AW). SFAE-SDR-AW. Redstone Arsenal, AL 35898-5000.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

HANDLING AND DESTRUCTION NOTICE - Comply with distribution statement and destroy by any method that will prevent disclosure of contents or reconstruction of this document.

VERIFIED DRAFT

AR-20

EXCERPTED

MWO 1-1520-280-50-19

1. PURPOSE.

The purpose of this Modification Work Order (MWO) is to replace the legacy Improved Signal Data Converter (ISDC) with the Advanced Sight and Display Computer (ASDC). This MWO installs the Pilot and Copilot Common Display Interface Unit (CDIU). This MWO will enable the Pilot and Copilot to take advantage of newer technology for the reticle based Heads Up Display (HUD).

2. PRIORITY.

This modification is classified ROUTINE.

3. END ITEM(S) OR SYSTEM(S) TO BE MODIFIED.

a. Selected UH-60M Helicopters will be modified in accordance with instructions contained in paragraph 10.

b. The following Helicopter was modified during re-validation:

NOMENCLA-

TURE LIN NSN CAGEC PART

NUMBER

MODEL

NUMBER

SERIAL

NUMBER(S)

HELICOPTER,

UTILITY H32429 1520-01-492-6324 78286 UH-60M UH-60M 07-20024

b. The following Helicopters were modified during validation:

NOMENCLA-

TURE LIN NSN CAGEC PART

NUMBER

MODEL

NUMBER

SERIAL

NUMBER(S)

HELICOPTER,

UTILITY H32429 1520-01-492-6324 78286 UH-60M UH-60M 07-20061

c. The following Helicopters were modified during verification:

NOMENCLA-

TURE LIN NSN CAGEC PART

NUMBER

MODEL

NUMBER

SERIAL

NUMBER(S)

HELICOPTER,

UTILITY H32429 1520-01-492-6324 78286 UH-60M UH-60M 10-20265

d. The following Helicopters were modified for temporary installation:

NOMENCLA-

TURE LIN NSN CAGEC PART

NUMBER

MODEL

NUMBER

SERIAL

NUMBER(S)

HELICOPTER,

UTILITY H32429 1520-01-492-6324 78286 UH-60M UH-60M 12-20441

HELICOPTER,

UTILITY H32429 1520-01-492-6324 78286 UH-60M UH-60M 12-20443

4. MODULE(S) (COMPONENTS, ASSEMBLIES, SUBASSEMBLIES, BOARDS, AND CARDS) TO BE

MODIFIED.

Not applicable.

5. PART(S) TO BE MODIFIED.

The following item(s), whether installed or in PLL/ASL or depot stock, shall be modified. Stocked parts shall be modified prior to issue and shall be marked so that it can be easily determined that modification has been accomplished.

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOMENCLATURE NSN CAGEC PART NUMBER SERIAL

NUMBER(S)

Left Closeout Panel Assembly 5340-01-599-8389 78286 70500-02053-091 N/A

Right Closeout Panel Assembly 5340-01-599-8121 78286 70500-02053-080 N/A

* NSN not assigned.

6. APPLICATION.

a. Time Compliance Schedule: MWO effective date dd mmm yyyy and completion date dd mmm yyyy.

b. Level of Maintenance: Depot

c. Work Force and Man Hour Requirements:

WORKFORCE/SKILLS MAN-HOURS MAN-HOURS W/O DISASSEMBLY

1 Sheet Metal Mechanic 8 hours 4 hours 2 Helicopter Electrician 180 hours 160 hours 1 General Aircraft Mechanic 20 hours 8 hours 1 Aircraft Inspector 80 hours 50 hours Total man-hours for single aircraft application: 288 hours 222 hours

d. MWO(s) to be applied before or concurrently with the application of this MWO:

Not Applicable.

7. TECHNICAL PUBLICATIONS AFFECTED/CHANGED.

Technical publications that have been or are being changed as a result of this MWO:

PUBLICATION DATE CHANGE DATE

TM 1-1520-280-23&P 30-OCT-2017 30-OCT-2017

TM 1-1520-280-10 30-OCT-2017 30-OCT-2017

UH-60M PMI 30-OCT-2017 30-OCT-2017

8. MWO KIT(S)/PART(S) AND THEIR DISPOSITION.

a. Kit(s)/part(s) needed to apply the MWO:

NOMENCLATURE NSN CAGEC PART

NUMBER

WT.

(LB)

DIM.

(IN)

CUBIC

DISP.

SEC

CLASS

UH-60M ASDC

Collector Kit * 81996 1051772-10 60.00

H - 24.00 W - 24.00

L - 24.00

8.00 CUBE

(FT) **U

* NSN not assigned.

** Security classifications are U-Unclassified.

b. Contents of the MWO kits:

MWO A-Kit Contents

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOMENCLATURE NSN CAGEC PART NUMBER QTY

ASDC INSTL, UH-60M * 81996 1051830-10 1

DECAL, ASDC * 81996 1051788-123 1

HARNESS INSTL, ASDC,

UH-60M * 81996 1051824-10 1

HARNESS ASSY HDTS-W2, UH-60M * 81996 1051814-10 1

HARNESS ASSY HDTS-W8, UH-60M * 81996 1051817-10 1

HARNESS ASSY HDTS-W10 * 81996 1051897-10 1

HARNESS ASSY HDTS-W11 * 81996 1051896-10 1

TUBING, PLASTIC, SPIRAL WRAP * 81996 1051936-HT 2027-020 4

BRACKET, ANGLE 5340-00-598-

8251 0U503 AN743-12 2

INSULATION SLEEVING,

ELECTRICAL * 06090 HRHT-3/2 2

STRAP, TIE DOWN, ELECTRICAL

COMPONENTS

5975-01-379- 7230 06324 600-052 4

NUT, SELF-LOCKING, EXTENDER

WASHER

5310-00-807-

1467 80205 MS21042-3 40

SCREW, MACHINE 5305-00-925-

7857 80205 MS27039-1-09 10

SCREW, MACHINE 5305-00-925-

9674 80205 MS27039-1-10 15

SCREW, MACHINE 5305-00-925-

7863 80205 MS27039-1-16 1

SCREW, MACHINE 5305-915-00-

0040 80205 MS27039-1-20 5

SCREW, MACHINE 5305-00-891-

1778 80205 MS27039-1-21 1

SCREW, MACHINE 5305-00-959-

6269 80205 MS27039-1-24 2

SCREW, MACHINE 5305-00-925-

4837 80205 MS27039-1-26 1

SCREW, MACHINE 5305-00-925-

7864 80205 MS27039-1-28 5

SCREW, MACHINE 5305-00-935-

7591 80205 MS27039-1-32 1

SCREW, MACHINE 5305-00-985-

3648 80205 MS27039-1-35 1

SCREW, MACHINE 5305-00-839-

7092 80205 MS27039-1-38 2

BRACKET, ANGLE 5340-00-528-

4882 96906 MS9592-012 2

WASHER, FLAT 5310-01-352-

9570 80205 NAS1149D0332K 33

SPACER, SLEEVE 5365-01-321-

9888 80205 NAS43DD3-16FC 3

SPACER, SLEEVE 5365-01-531-

0804 80205 NAS43DD3-56FC 1

SPACER, SLEEVE 5365-01-485-

7258 80205 NAS43DD3-80FC 2

CLAMP, LOOP 5340-01-516-

6765 0U503 AS21919WDG03 2

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOMENCLATURE NSN CAGEC PART NUMBER QTY

CLAMP, LOOP 5340-00-200-

8559 0U503 AS21919WDG07 2

CLAMP, LOOP 5340-00-291-

5347 0U503 AS21919WDG08 8

CLAMP, LOOP 5340-01-526-

3661 0U503 AS21919WDG09 2

CLAMP, LOOP 5340-00-584-

6556 0U503 AS21919WDG10 3

CLAMP, LOOP 5340-00-664-

8163 0U503 AS21919WDG11 4

CLAMP, LOOP 5340-00-286-

9427 0U503 AS21919WDG12 6

CLAMP, LOOP 5340-00-286-

9421 0U503 AS21919WDG13 1

CLAMP, LOOP 5340-00-286-

9424 0U503 AS21919WDG14 9

CLAMP, LOOP 5340-00-664-

8164 0U503 AS21919WDG15 3

CLAMP, LOOP 5340-00-286-

9418 0U503 AS21919WDG16 2

CLAMP, LOOP 5340-00-200-

7451 0U503 AS21919WDG17 3

CLAMP, LOOP 5340-00-200-

7449 0U503 AS21919WDG18 2

CLAMP, LOOP 5340-01-061-

2296 0U503 AS21919WDG19 1

CLAMP, LOOP 5340-00-664-

8188 0U503 AS21919WDG20 14

CLAMP, LOOP 5340-01-516-

6768 0U503 AS21919WDG21 6

CLAMP, LOOP 5340-00-664-

8165 0U503 AS21919WDG22 2

CLAMP, LOOP 5340-01-063-

3936 0U503 AS21919WDG23 4

CLAMP, LOOP 5340-00-200-

3045 0U503 AS21919WDG24 5

CLAMP, LOOP 5340-01-516-

6770 0U503 AS21919WDG25 1

COVER, ELECTRICAL CONNECTOR 5935-01-387-

0125 81349 D38999/32W13R 2

HARNESS ASSY, HDTS-W2, UH-60M * 81996 1051814-10 1

HARNESS * 81996 1051814-1 1

TAPE, LABEL * 81996 1051936-NPVF200CL-

004 8

CABLE, MARKER * 81996 1051939-525 4

CABLE, MARKER * 81996 1051939-245 1

CABLE, MARKER * 81996 1051939-247 1

CONNECTOR, PLUG, ELECTRICAL 5935-01-648-

9542 77820 TV06RQW19-18S-LC 2

PLUG, END SEAL, ELECTRICAL

CONNECTOR

5935-01-578-

1405 96906 MS27488-22-2 12

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOMENCLATURE NSN CAGEC PART NUMBER QTY

CONTACT, ELECTRICAL 5999-00-152-

9574 81343 M39029/56-351 12

SPLICE, CONDUCTOR 5940-01-288-

9591 06090 S0303R 4

SPLICE, CONDUCTOR 5940-01-305-

4713 06090 S0305R 2

INSULATION SLEEVING,

ELECTRICAL * 06090 HRHT-3/2 2

INSULATION SLEEVING,

ELECTRICAL

5970-01-667-

0532 06090 HRHT-2/2 2

BACKSHELL, ELECTRICAL

CONNECTOR

5935-01-587-

9183 031M6 ISOHS150NF1907-5S 2

SLEEVING * 81996 1051936-5111001332-

018 2

BRAID, WIRE * 81996 1051936-

AA59569R36T0781-012 2

TERMINAL, LUG 5940-00-143-

4771 81343 MS25036-103 1

CONTACT, ELECTRICAL 5999-00-320-

7459 81343 M39029/56-348 28

CABLE MARKER * 81996 1051939-535 1

CABLE MARKER * 81996 1051939-527 1

CABLE MARKER * 81996 1051939-533 1

PLUG, END SEAL, ELECTRICAL

CONNECTOR

5935-01-408- 3557 81349 M85049/80-8 4

HARNESS ASSY, HDTS-W8, UH-60M * 81996 1051817-10 1

HARNESS * 81996 1051817-1 1

TAPE, LABEL * 81996 1051936-NPVF200CL-

004 2

CABLE MARKER * 81996 1051939-251 1

CABLE MARKER * 81996 1051939-539 2

CABLE MARKER * 81996 1051939-255 1

CABLE MARKER * 81996 1051939-257 1

CABLE MARKER * 81996 1051939-259 1

CONTACT, ELECTRICAL 5999-01-646-

9416 77820 21-033388-021 4

* NSN not assigned.

MWO B-Kit Contents

NOMENCLATURE NSN CAGEC PART NUMBER QTY

ASDC B-KIT INSTALLATION, UH-60M * 81996 1051781-10 1

NUT, PLAIN, CAP 5310-00-013-1498 58536 AA55629-63 8

WASHER, LOCK 5310-00-045-3296 80205 MS35338-43 8

WASHER, FLAT 5310-01-421-1987 80205 NAS1149F0332B 8

SCREW, MACHINE 5305-00-839-3437 80205 NAS517-3-2 8

COVER, ELECTRICAL CONNECTOR 5935-01-280-5470 81349 D38999/33W25R 1

CABLE ASSEMBLY ** * 18863 ABC60692 2

CDIU INSTL, LHS, UH-60M * 81996 1051786-10 1

BRACKET ASSY, AMTU/CDIU, LHS * 81996 1051736-10 1

DECAL, CPLT CDIU * 81996 1051788-139 1

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOMENCLATURE NSN CAGEC PART NUMBER QTY

WIRE, ELECTRICAL * 81996 1051936-M22759/43-8-

0-018 1

NUT, SELF-LOCKING, EXTENDED

WASHER 5310-00-807-1467 80205 MS21042-3 2

WASHER, LOCK 5310-00-045-3296 80205 MS35338-43 3

NUT, PLAIN, HEXAGON 5310-00-167-1343 80205 AN315-3R 1

WASHER, FLAT 5310-01-385-4499 80205 NAS1149D0316J 3

WASHER, FLAT 5310-01-105-7241 80205 NAS1149D0332J 3

WASHER, FLAT 5310-00-183-4406 80205 NAS1149D0363J 1

WASHER, FLAT 5310-01-395-8986 80205 NAS1149D0463J 1

WASHER, FLAT 5310-01-421-1987 80205 NAS1149F0332B 2

SCREW, MACHINE 5305-01-572-6751 80205 NAS1801-3-09 3

SCREW, MACHINE 5305-00-420-0611 80205 NAS514P1032-14B 1

TERMINAL, LUG 5940-00-143-5284 0U583 MS25036-115 2

CDIU INSTALL, RHS, UH-60M * 81996 1051786-20 1

BRACKET ASSY, AMTU/CDIU, RHS * 81996 1051736-20 1

DECAL, PILOT CDIU * 81996 1051788-137 1

WIRE, ELECTRICAL * 81996 1051936-M22759/43-8-

0-018 1

NUT, SELF-LOCKING, EXTENDED

WASHER 5310-00-807-1467 80205 MS21042-3 2

WASHER, LOCK 5310-00-045-3296 80205 MS35338-43 3

NUT, PLAIN, HEXAGON 5310-00-167-1343 80205 AN315-3R 1

WASHER, FLAT 5310-01-385-4499 80205 NAS1149D0316J 3

WASHER, FLAT 5310-01-105-7241 80205 NAS1149D0332J 3

WASHER, FLAT 5310-00-183-4406 80205 NAS1149D0363J 1

WASHER, FLAT 5310-01-395-8986 80205 NAS1149D0463J 1

WASHER, FLAT 5310-01-421-1987 80205 NAS1149F0332B 2

SCREW, MACHINE 5305-01-572-6751 80205 NAS1801-3-09 3

SCREW, MACHINE 5305-00-420-0611 80205 NAS514P1032-14B 1

TERMINAL, LUG 5940-00-143-5284 0U583 MS25036-115 2

* NSN not assigned.

** To be connected to Pilot and Copilot Quick Disconnect and stored with Pilot and Copilot Helmets.

Government Furnished Equipment (GFE)

NOMENCLATURE NSN CAGEC PART NUMBER QTY

COMMON DISPLAY INTERFACE UNIT

(CDIU) (1051781) 7025-01-673-8194 0WEC9 MB1254B-01 2

ADVANCED SIGHT AND DISPLAY

COMPUTER (ASDC) (1051781) * 0WEC9 MB1919A-00 1

DAY COLOR DISPLAY 6610-01-658-5410 0WEC9 MB1268D-03 2

DISPLAY UNIT, HEADS-UP 5855-01-658-2509 0WEC9 039430B-02 2

CLIPS, NVG STABILIZATION * 4N1A0 SYNC_STABIL_16_1 2

* NSN not assigned.

c. Bulk and expendable materials:

AR-20

EXCERPTED

MWO 1-1520-280-50-19

NOTE

• For potentially hazardous materials, maintenance personnel and supervisors are reminded to refer to the product Safety Data Sheets (SDS) for specific requirements about components, reactivity, physical hazards, spill procedures, health hazards, first aid procedures, and for appropriate Personal Protective Equipment (PPE) to be worn when handling these materials. Toxic and flammable materials can irritate the skin, cause burns and respiratory problems.

• The Bulk and Expendable list below does not include items required by the applicable technical manuals for component removals and installations as a result of this modification.

The following items are not part of the kit and will be requisitioned:

NOMENCLATURE NSN CAGEC PART NUMBER QTY

SEALANT, LOW ADHESION** *** 81343 AMS 3284, Type 2, Class B 1/2 1

SEALING COMPOUND,

CORROSIVE INHIBITIVE** 8030-00-008-7198 81349 M81733-21A-PT-30MIN 1

SEALING COMPOUND** 8030-00-936-9940 76381 EDGE SEALER 3950 1

TAPE, LACING AND TYING 4020-01-657-1095 58536 AA52084-C-3 BLACK 1

ADHESIVE** 8040-00-390-7959 1A9T3 SCOTCH-GRIP 847 1

CORROSION RESISTANT

COATING, CHEMICALLY

TREAT ALUMINUM

8030-01-560-9106 81349 M81706-2B6D-12EA 1

CORROSION PREVENTIVE

COMPOUND** 8030-00-546-8637 81349 M81309-B2134A 2

TAPE, INSULATION,

ELECTRICAL** 5970-00-186-6627 81349 W: 0.500 IN, T: 0.007 IN 2

TAPE, INSULATION,

ELECTRICAL** 5970-00-955-9976 58536 AA59163-1 II 0040 2

WIRE, NONELECTRICAL** 9505-00-221-2650 80205 MS20995C20 1

ACETONE, TECHNICAL 6810-00-184-4796 81346 ASTM D329 1

ISOPROPYL, ALCOHOL

TECHNICAL 6810-00-983-8551 81348 TT-I-735 1

TOWEL, MACHINERY,

WIPING 7920-00-260-1279 83421 7920-00-260-1279 1

STRAP, TIEDOWN,

ELECTRICAL COMPONENTS 5975-01-379-7230 06324 600-052 12

PAINT (AIRCRAFT INTERIOR

GRAY)** *** 81349 MIL-DTL-53039, TYPE

III COLOR NO. 36231 1

PRIMER** *** 81349 MIL-PRF-23377, TYPE

II, CLASS C2 1

CORROSION PREVENTIVE

COMPOUND** 8030-01-396-5738 81349 MIL-PRF-16173

CL2GR4 1

SHIELDING GASKET,

ELECTRONIC 5999-01-558-4320 1NPE1 PG185075-01 5

* It is permissible to purchase different quantities and volumes of this item to maximize mission requirements while reducing hazardous waste.

** It is permissible to substitute this item provided the performance and military specifications are met or exceeded. This includes but is not limited to class, types, color, corrosion, adhesion, and compression characteristics.

*** NSN not assigned.

d. Parts disposition: