TDP 2 1051788 REV - DECALS UH-60M.pdf
PDF 88 KB Posted
- Solicitation number
- W58RGZ-20-RFI-AKITS
About this file
This request for information seeks capabilities for the manufacture of airframe modification kits for Army rotary wing aircraft. Interested small businesses located in the Huntsville-Decatur-Albertville Combined Statistical Area must submit responses by April 9, 2020 to identify their ability to manufacture wiring harnesses, mechanical brackets, and kit components. The Army Contracting Command at Redstone Arsenal intends to issue a small business set-aside solicitation for the indefinite quantity production of advanced sight and display computer, encryptable aircraft wireless intercom system, and aviation information system airframe modification kits over the next five years. Respondents should demonstrate their quality certification and compliance with fabrication, soldering, and tin whisker mitigation standards, and address the impact of meeting Class 3 requirements for electrical, electronic, cable, and wire harness assemblies. Sample technical data packages are provided as representative of future kit configurations.
View the file
Other files
Show all 46
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2. 3.
INCORPORATED BY THE DESIGN ACTIVITY.
CAD MAINTAINED. CHANGES SHALL BE
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT
OF DEFENSE (DoD) AND DoD CONTRACTOR'S ONLY FOR ADMINISTRATIVE AND
OPERATIONAL USE. THIS DETERMINATION WAS MADE ON 23 FEB 2012. OTHER
REQUEST SHALL BE REFERRED TO PRODUCT MANAGER (PM) AIR WARRIOR (AW).
SFAE-SDR-AW. REDSTONE ARSENAL, AL 35898-5000.
EXPORT CONTROL WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA
WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE
22, U.S.C. SEC 2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979,
AS AMENDED, TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE
EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE
IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25
REFERENCE ONLY
THIS DRAWING IS FOR REFERENCE ONLY.
NO PARTS MAY BE FABRICATED USING THIS
UNRELEASED DRAWING.
FILENAME:UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
TOLERANCES SHOWN BELOW
FRACTIONS , ANGLES 1
3 PLACE DECIMALS .010
2 PLACE DECIMALS .03
1 PLACE DECIMALS .5
APPROVED BY ORDER OF COMMANDER
USAAMCOM
SUBMITTED
ENGINEER
CHECKED
PREPARED
U.S. ARMY
AVIATION AND MISSILE COMMAND
REDSTONE ARSENAL, ALABAMA 35898
NEXT ASSY
APPLICATION SCALE:
DRAWING NO.CAGE CODESIZE
TITLE
CONTRACT NO.
DATE
USED ON
REV
THIRD ANGLE PROJECTION
APPROVED
QTY PER DASH NO.
1051788
P.ELLIS
D 81996
SHEET 1 OF 1
4:1
UH-60MSEE TABLE 1
2013/02/26
W.PITTA 2013/03/18
R.DRAKE 2013/03/25
1051788
FA8075-14-D-0025
2013/02/26
2013/03/18B.KECK
K.WIETER
.240
4X R.05
1.00
.30
-123 5. 7.DECAL, ASDC
DECAL, TYPE B 4. 7.
.70
.32
.150 .270
4X R.05
4. 7.DECAL, TYPE A
.25 .12
.22
.40
4X R .05
REVISIONS
ZONE REV DESCRIPTION DATE APPROVED
- INITIAL RELEASE PER ERR AV-14214. 2018/12/07 S.SANDERS
TABLE 1
DECAL INFORMATION
DASH NO. NOMENCLATURE NHA TYPE
-101 NOT USED
-103 NOT USED
-105 NOT USED
-107 NOT USED
-109 NOT USED
-111 NOT USED
-113 NOT USED
-115 NOT USED
-117 NOT USED
-119 NOT USED
-121 NOT USED
-123 ASDC 1051830 SEE SHT 1
-125 NOT USED
-127 NOT USED
-129 NOT USED
-131 NOT USED
-133 PILOT
AMTU 1052147 A
-135 CPLT
AMTU 1052147 A
-137 PILOT
CDIU 1051786 A
-139 CPLT
CDIU 1051786 A
-141 NOT USED
-143 NOT USED
-145 PILOT
BRU 1052195 A
-147 CPLT
BRU 1052195 A
-149 PILOT
CU 1052140 B
-151 CPLT
CU 1052135 B
-01 CAGE CODE PART OR
IDENTIFYING NUMBER NOMENCLATURE OR DESCRIPTION MATERIAL SPECIFICATION NOTES ITEM OR
FIND NO.
PARTS LIST
- SEE TABLE 1 DECAL, UH-60M -
D
C
A
12345
D
C
B
A
1051788 D
W G
N O
8. ABBREVIATIONS NOT LISTED IN ASME Y14.38:
AMTU - ADVANCED MAGNETIC TRANSMITTER UNIT
ASDC - ADVANCED SIGHT AND DISPLAY COMPUTER
BRU - BORESIGHT RETICLE UNIT
CDIU - COMMON DISPLAY INTERFACE UNIT
CPLT - CO-PILOT
CU - COIL UNIT
7. TEXT SHOWN AS EXAMPLE. USE NOMENCLATURE FROM TABLE 1. CENTER TEXT ON DECAL
AS REQUIRED. TRIM TO FIT AS REQUIRED.
EXAMPLE: A933L1
CONTACTS =
6. ITEM IDENTIFICATION: IDENTIFY IAW MIL-STD-130, METHOD: PACKAGE
WITH DIGITALLY PRINTED LABEL (CONTRASTING COLOR), AT A
MINIMUM MARK LABEL AS FOLLOWS: 81996-1051788-XXX, WHERE XXX
IS THE APPLICABLE DASH NUMBER
MFR CAGE CODE (IF DIFFERENT FROM DESIGN ACTIVITY)
5. CHARACTERS TO BE .18 .02 HIGH CAPS USING ARIAL OR EQUIVALENT LETTERING. CENTER
CHARACTERS ON DECAL AS SHOWN. MAINTAIN A .02 MINIMUM EDGE DISTANCE. A WIDTH
FACTOR MAY BE APPLIED.
4. CHARACTERS TO BE .09 .02 HIGH CAPS USING ARIAL OR EQUIVALENT LETTERING. CENTER
CHARACTERS ON DECAL AS SHOWN. MAINTAIN A .02 MINIMUM EDGE DISTANCE. A WIDTH
FACTOR MAY BE APPLIED.
3. FINISH: CHARACTER COLOR TO BE WHITE AND BACKGROUND TO BE BLACK. IMAGE TO
BE PERMANENT. SMALL SPECKS OR VOIDS THAT DO NOT DEGRADE THE
LEGIBILITY ARE ALLOWED.
2. MATERIAL: PSA BACKED POLYESTER FILM PER DLA A-A-59485, TYPE I, COLOR BLACK.
1. APPLICABLE STANDARDS/SPECIFICATIONS:
INTERPRET DRAWING IAW ASME Y14.100-2013.
DIMENSIONING AND TOLERANCING IAW ASME Y14.5-2009.
ABBREVIATIONS AND ACRONYMS IAW Y14.38.
NOTES: UNLESS OTHERWISE SPECIFIED
AL933L1
CONTACTS
DECAL,
UH-60M
| Sheet1 |
| Drawing View9 |
| Drawing View10 |
| Drawing View11 |
File details come from the government source that posted it. Updated .