TDP 2 1051786 REV - CDIU INSTL UH-60M.pdf

ALL SHEETS SAME REV

-10 CDIU INSTL, LHS, UH-60M

A

9.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE (DoD) AND DoD CONTRACTOR'S ONLY FOR ADMINISTRATIVE AND

OPERATIONAL USE. THIS DETERMINATION WAS MADE ON 23 FEB 2012. OTHER

REQUEST SHALL BE REFERRED TO PRODUCT MANAGER (PM) AIR WARRIOR (AW).

SFAE-SDR-AW. REDSTONE ARSENAL, AL 35898-5000.

EXPORT CONTROL WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE

22, U.S.C. SEC 2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979,

AS AMENDED, TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE

IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25

Ω -

FILENAME:UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES.

TOLERANCES SHOWN BELOW

FRACTIONS , ANGLES 1

3 PLACE DECIMALS .010

2 PLACE DECIMALS .03

1 PLACE DECIMALS .5

APPROVED BY ORDER OF COMMANDER

USAAMCOM

SUBMITTED

ENGINEER

CHECKED

PREPARED

U.S. ARMY

AVIATION AND MISSILE COMMAND

REDSTONE ARSENAL, ALABAMA 35898

NEXT ASSY

APPLICATION SCALE:

DRAWING NO.CAGE CODESIZE

TITLE

CONTRACT NO.

DATE

USED ON

REV

THIRD ANGLE PROJECTION

APPROVED

QTY PER DASH NO.

1051786

M. MOORE

D 81996

SHEET 1 OF 3

CDIU INSTL, UH-60M

NONE

UH-60M1051781

2013/01/26

P. HILL 2013/02/06

R.DRAKE 2013/04/24

1051786

FA8075-14-D-0025

2013/01/26

2013/04/26B.KECK

POINTS MAX 2.5m Ω PER FAYING

SURFACE TOTAL READING

NOT TO EXCEED

A B 2.5 MILLIOHMS

FROM TO

SUPPLEMENTAL APPLICATION NOTESTORQUE VALUE(S)FIND

NUMBER

31-38 IN-LBS

30-35 IN-LBS

8 35-40 IN-LBS

CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

K.WIETER

WL

251.00

REF

STA

247.00

REF

OUTBD FWD

UP

REFERENCE

EXISTING

ARMORED WING

-10 SHOWN

-20 OPPOSITE

(-10) VIEW A

CDIU INSTL, RHS, UH-60M

(SHOWN)

-20 (OPPOSITE)

REVISIONS

ZONE REV DESCRIPTION DATE APPROVED

- INITIAL RELEASE PER ERR AV-14214. 2018/12/07 S.SANDERS

-20 -10 CAGE CODE PART OR

IDENTIFYING NUMBER NOMENCLATURE OR DESCRIPTION MATERIAL SPECIFICATION NOTES ITEM OR

FIND NO.

PARTS LIST

AR AR 81349 MIL-PRF-16173 CL II GRADE 4 CORROSION PREVENTIVE COMPOUND 20

AR AR 81349 M81309-B2134A CORROSION PREVENTIVE COMPOUND 19

AR AR 76381 EDGE SEALER 3950 SEALING COMPOUND 18

AR AR 81343 AMS 3284, TYPE 2, CLASS B-1/2 SEALANT, LOW ADHESION 17

2 2 0U583 MS25036-115 TERMINAL, LUG 16

1 1 80205 NAS514P1032-14B SCREW, MACHINE, 100 DEGREE, FLAT HEAD 15

3 3 80205 NAS1801-3-09 SCREW, MACHINE 14

2 2 80205 NAS1149F0332B WASHER, FLAT 13

1 1 80205 NAS1149D0463J WASHER, FLAT 12

1 1 80205 NAS1149D0363J WASHER, FLAT 11

3 3 80205 NAS1149D0332J WASHER, FLAT 10

3 3 80205 NAS1149D0316J WASHER, FLAT 9

1 1 80205 AN315-3R NUT, PLAIN, HEXAGON 8

3 3 80205 MS35338-43 WASHER, LOCK 7

2 2 80205 MS21042-3 NUT, SELF-LOCKING, EXTENDED WASHER 6

1 1 81996 1051936-M22759/43-8-0-018 WIRE, ELECTRICAL 5

- 1 81996 1051788-139 DECAL, CPLT CDIU 4

1 - 81996 1051788-137 DECAL, PILOT CDIU 3

1 - 81996 1051736-20 BRACKET ASSY, AMTU/CDIU, RHS 2

- 1 81996 1051736-10 BRACKET ASSY, AMTU/CDIU, LHS 1

- -20 CDIU INSTL, RHS, UH-60M -

- -10 CDIU INSTL, LHS, UH-60M -

D

C

A

12345

D

C

B

A

1051786 D

W G

N O

12. ABBREVIATIONS NOT LISTED IN ASME Y14.38:

AMTU - ADVANCED MAGNETIC TRANSMIT UNIT

CDIU - COMMON DISPLAY INTERFACE UNIT

11. FINISH: TOUCH UP ALL BARE ALUMINUM SURFACES USING CHEMICAL

CONVERSION COATING IAW MIL-DTL-5541, CLASS 1A USING

MATERIAL IAW MIL-DTL-81706. ONE COAT OF MIL-PRF-23377,

TYPE II, CLASS C2 PRIMER. ONE COAT OF MIL-DTL-53039 PAINT,

BLACK, 37038, IAW SAE AMS-STD-595. CARC SYSTEM IAW

MIL-DTL-53072.

10. WET INSTALL HARDWARE AND THREADED FASTENERS IAW

MIL-STD-7179 USING CORROSION PREVENTIVE COMPOUND

(M81309-B2134A) AND CORROSION PREVENTIVE COMPOUND

(MIL-PRF-16173 CL II GRADE 4).

9. CRIMP TERMINAL LUG (MS25036-115) WITH 83-005 CRIMP TOOL.

8. AFTER TORQUE AND BOND CHECK, ENCAPSULATE USING

SAE-AMS-3284 SEALANT, TYPE 2, CLASS B-1/2.

7. INSTALL DECALS (1051788-137 AND -139) TO A CLEAN, DRY SURFACE.

LOCATE APPROXIMATELY AS SHOWN. TRIM TO FIT AS REQUIRED.

APPLY SEALING COMPOUND (EDGE SEALER 3950).

6. ELECTRICAL BONDING PER MIL-STD-464, RESISTANCE BETWEEN THE

POINTS SHOWN BY SHALL NOT EXCEED THE FOLLOWING VALUES.

5. FAYING SURFACES TO BE PREPARED IN ACCORDANCE WITH

SAE ARP1870, PARAGRAPH 5.1, USING MIL-DTL-81706, CLASS 3.

ELECTRICAL BONDING REQUIREMENTS PER SAE ARP1870,

PARAGRAPH 5.7.

4.

3. ROUTE CABLE PER CABLE DRAWING 1051824.

2. REMOVE BURRS AND BREAK ALL SHARP EDGES.

1. APPLICABLE STANDARDS/ SPECIFICATIONS:

INTERPRET DRAWING PER ASME Y14.100-2013.

DIMENSIONING AND TOLERANCING IAW ASME Y14.5-2009.

ABBREVIATIONS AND ACRONYMS IAW Y14.38.

NOTES: UNLESS OTHERWISE SPECIFIED

SCALE:

DRAWING NO.CAGE CODESIZE REV

D

SHEET 2 OF 31:2

1051786 -81996

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE (DoD) AND DoD CONTRACTOR'S ONLY FOR ADMINISTRATIVE AND

OPERATIONAL USE. THIS DETERMINATION WAS MADE ON 23 FEB 2012. OTHER

REQUEST SHALL BE REFERRED TO PRODUCT MANAGER (PM) AIR WARRIOR (AW).

SFAE-SDR-AW. REDSTONE ARSENAL, AL 35898-5000.

EXPORT CONTROL WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE

22, U.S.C. SEC 2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979,

AS AMENDED, TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE

IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25

UP

FWD

WL

251.00

REF

STA

247.00

REF

C

5. Ω A6.

C C

VIEW A

VIEW LOOKING OUTBOARD, LHS

-20 OPPOSITE

-10 SHOWN

(-20 OPPOSITE)

7.

13FS

FS4. 10.

2X

EXISTING

ARMORED WING

(-10 SHOWN)4

(J1)

(J2)

2 (OPPOSITE)

(SHOWN)

UNPAINTED SURFACE

ON BRACKET ASSY

(CDIU, MB1254B-01,

PART OF 1051781 INSTALL)

8.

4.

4.

SECTION C-C

SCALE 2 : 1

12 FS

11 FS

10 FS

7 FS

10 FS

10 FS

7 FS

6 FS

8 FS

16 FS

6. Ω B

A

B

B

UNPRIMED AREA

OF AIRCRAFT

REVISIONS

ZONE REV DESCRIPTION DATE APPROVED

- INITIAL RELEASE PER ERR AV-14214. 2018/12/07 S.SANDERS

D

C

A

12345

D

C

B

A

1051786 D

W G

N O

SCALE:

DRAWING NO.CAGE CODESIZE REV

D

SHEET 3 OF 31:2

1051786 -81996

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE (DoD) AND DoD CONTRACTOR'S ONLY FOR ADMINISTRATIVE AND

OPERATIONAL USE. THIS DETERMINATION WAS MADE ON 23 FEB 2012. OTHER

REQUEST SHALL BE REFERRED TO PRODUCT MANAGER (PM) AIR WARRIOR (AW).

SFAE-SDR-AW. REDSTONE ARSENAL, AL 35898-5000.

EXPORT CONTROL WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE

22, U.S.C. SEC 2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979,

AS AMENDED, TITLE 50, U.S.C., APP 2401 ET SEQ. VIOLATIONS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE

IN ACCORDANCE WITH PROVISION OF DoD DIRECTIVE 5230.25

A

5.

WL

251.00

REF

STA

247.00

REF

D

D

VIEW B-B

VIEW LOOKING INBOARD, LHS

.191-.196

REMOVE EXISTING RIVET

4.

8.SECTION D-D

SCALE 2 : 1

9 FS

16 FS

9 FS

7 FS

6 FS

REVISIONS

ZONE REV DESCRIPTION DATE APPROVED

- INITIAL RELEASE PER ERR AV-14214. 2018/12/07 S.SANDERS

D

C

A

12345

D

C

B

A

1051786 D

W G

N O