Encl 4 TRANS PKG DID CDRLS.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DATA ITEM DESCRIPTION

Title: ACQUISITION AND SUSTAINMENT DATA PACKAGE (ASDP) DEFICIENCY REPORT

(DR)

Number: DI-PSSS-81535B Approved Date: 20220715 AMSC Number: F10333 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFLCMC/EZSC) Project Number: PSSS-2022-005 Applicable Forms: N/A

Use/Relationship: The Acquisition and Sustainment Data Package (ASDP) Deficiency Report (DR) provides complete and accurate deficiency identification on government furnished material (GFM) in acquisition or repair contracts by contractors to the Government. This information is used by the Government to identify necessary corrective action in accordance with T.O. 00-35D-54, USAF Deficiency Reporting, Investigation, and Resolution (DRI&R).

(Copies of this document are available online at https://www.tinker.af.mil/Resources/Technical- Orders/.)

a. This Data Item Description (DID) contains the format, content, and intended use information for the data deliverable resulting from the work task described in the solicitation.

b. This DID is applicable when contractors are responsible for maintaining custodial records for government property being repaired.

c. This DID interrelates with DI-MGMT-80258, Acquisition and Sustainment Data Package (ASDP) Material Improvement Project (MIP) Report.

(Copies of this document are available online at https://quicksearch.dla.mil.)

d. This DID supersedes DI-PSSS-81535A.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The ASDP Deficiency Report shall be in a text searchable format. The Data Objects/Attributes and Associated Metadata (DOAM) listing shall be in Microsoft Excel spreadsheet format in accordance with the template provided in the DOAM Specification attached to the contract. All data shall be in the English language.

3. Content. The Deficiency Report content shall be as described in Table I.

3.1 DOAM. The completed Deficiency Report template, provided in the DOAM Specification attached to the contract, shall comply with the format requirements (see 2. above) so that it can be ingestible into a Product Lifecycle Management (PLM) solution to ensure proper tying, tracing, and linking to the lowest component of the end item to which the delivered Deficiency Report Information is applicable. Any field that is not applicable shall be marked “NA.”

Source: http://assist.dla.mil -- Downloaded: 2023-08-28T18:08Z Check the source to verify that this is the current version before use.

https://www.tinker.af.mil/Resources/Technical-Orders/ https://www.tinker.af.mil/Resources/Technical-Orders/ https://quicksearch.dla.mil/

DI-PSSS-81535B

TABLE I. Deficiency Report Content.

1. From: Address of Originating Activity

2. To: Office of Primary Responsibility (OPR) for the equipment. Refer to T.O.

00-35D-54 for guidance on Screening Points.

Subject: First Part as applicable:

a. Category I Deficiency Report (CAT I DR)

b. Category II Deficiency Report (CAT II DR)

c. Report Control Number (RCN): An RCN consists of three parts. The first part will be the DoD Activity Address Code (DoDAAC).

The second part will be the last two digits of the calendar year.

The third part will be a 4-digit sequence number that is locally assigned.

3. Description of Deficiency:

Describe in detail what is wrong, the circumstances prior to the difficulty, probable cause, any action taken, and recommendations. Attach copy of supporting documents. Continue on separate sheet if necessary.

4. Date of Deficiency: Year, month, day deficiency was discovered.

5. National Stock

Number (NSN) NSN and applicable Material Management Aggregation Code (MMAC) of item (see D043 or D086).

6. Nomenclature Noun of item for which report is submitted. Software DRs shall provide nomenclature of programmable hardware.

7. Operating Time at Failure

Hours, cycles, days, miles rounds or others

8. Deficient Item Part Number

Complete Manufacturer part number. If Computer Identification Number (CPIN) is associated with a computer program it shall also be provided.

9a. Manufacturer’s CAGE Code

Unique code assigned to suppliers of government or defense agencies.

9b. Manufacturer/Shipper/ City/State

Complete address of manufacturer or shipper.

10. Quantity Number received, inspected, deficient, and in stock.

11. Serial, lot or batch number Complete item serial number.

12a. Item new, repaired or overhauled

Use one to identify item as appropriate.

12b. Date Manufacturer, Repaired or Overhauled

Year/Month/Day

DI-PSSS-81535B

12c. Last Repair Facility CAGE/DoDAAC/Address

13a. Contract Number Obtain contract number from records service tag, manufacturer/container label, etc. Contract number is critical to processing reports.

13b. Requisition/Document Number

Obtain from tags/labels on item packaging.

13c. Purchase Order Number.

The Purchase Order Number associated with the defective part. This can usually be found on the attached shipping document. This field can also be used to annotate the Delivery Order number (products/supplies) or Task Order number (tasks/services) if known or applicable.

14. Government Furnished Material (GFM)

Yes/No/Unknown

15a. Item Under Warranty Yes/No/Unknown 15b. Warranty Expiration

Date Provide if known.

16. End Item Enter the applicable Equipment Item Code (EIC), Work Unit Code (WUC), or Table of Authorized Material Control Number (TAMCN) for the deficient material.

17. Next Higher Assembly a. NSN – National Stock Number associated with the next higher assembly.

b. NOMENCLATURE – Item name of the next higher assembly.

c. PART NUMBER – Part number assigned to the next higher assembly.

d. SERIAL NUMBER – Serial number from the next higher assembly.

18. End Item a. NSN – National Stock Number associated with the end item.

b. NOMENCLATURE – Name of the end item.

c. TYPE/MODEL – Type or model assigned to the end item configuration.

d. SERIAL NUMBER – Serial number from the end item equipment or system.

19. Current Disposition of Deficient Item

Holding/Disposed or Destroyed/Repaired/Other

20. Location of Deficient Material

Enter the name and location or supply activity that is currently holding the exhibit/deficient material.

End of DI-PSSS-81535B.

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: A008 title: Status Report for Contractor Receipt/Shipment of FMS R/R sub: NONE auth: DI-MISC-80915 ref: 1.2 Data 1.2.1 Reporting Requirements req_ofc: AFLCMC/LPSID dd250: NA appcode: NA dist: NA freq: MONTHLY asof: See Blk 16 firstsub: See Blk 16 subsub: See Blk 16 addressee1: AFLCMC/LPSID draft1:

reg1: 1 repro1:

addressee2: DCMA/ACO draft2:

reg2: 1 repro2:

addressee3: DLA/PCO draft3:

reg3: 1 repro3:

addressee4:

draft4:

reg4:

repro4:

addressee5:

draft5:

reg5:

repro5:

addressee6:

draft6:

reg6:

repro6:

addressee7:

draft7:

reg7:

repro7:

addressee8:

draft8:

reg8:

repro8:

addressee9:

draft9:

reg9:

repro9:

addressee10:

draft10:

reg10:

repro10:

addressee11:

draft11:

reg11:

repro11:

addressee12:

draft12:

reg12:

repro12:

addressee13:

draft13:

reg13:

repro13:

addressee14:

draft14:

reg14:

repro14:

addressee15:

draft15:

reg15:

repro15:

addressee16:

draft16:

reg16:

repro16:

addressee17:

draft17:

reg17:

repro17:

addressee18:

draft18:

reg18:

repro18:

addressee19:

draft19:

reg19:

repro19:

addressee20:

draft20:

reg20:

repro20:

addressee21:

draft21:

reg21:

repro21:

addressee22:

draft22:

reg22:

repro22:

addressee23:

draft23:

reg23:

repro23:

addressee24:

draft24:

reg24:

repro24:

addressee25:

draft25:

reg25:

repro25:

addressee26:

draft26:

reg26:

repro26:

addressee27:

draft27:

reg27:

repro27:

addressee28:

draft28:

reg28:

repro28:

addressee29:

draft29:

reg29:

repro29:

addressee30:

draft30:

reg30:

repro30:

addressee31:

draft31:

reg31:

repro31:

addressee32:

draft32:

reg32:

repro32:

addressee33:

draft33:

reg33:

repro33:

addressee34:

draft34:

reg34:

repro34:

addressee35:

draft35:

reg35:

repro35:

addressee36:

draft36:

reg36:

repro36:

addressee37:

draft37:

reg37:

repro37:

addressee38:

draft38:

reg38x:

repro38:

total_draft: 0 total_reg: 3 total_repro: 0 remarks: LPSID will provide an acceptable format to the contractor. The contractor shall prepare and furnish a monthly cumulative status report for all items that have been received for repair. The report shall be prepared as of the last working day of each month and forwarded by email or equivalent no later than the 5th working day of the following month. The initial report will be prepared for the month during which the contract assets are received. Reports will continue to be forwarded until all end items are re-manufactured. The final report will be annotated "Final Report." Negative reports are required.

Note: Reports will be IAW SOW outline and data requirement. Required changes of Status Report CDRL will be submitted to PCO by memo.

Ref: Block 14a for distribution:

AFLCMC/LPSI Rep-Ret Workflow <AFLCMC.LPSIRep-Ret.Workflow@us.af.mil>

DCMA/ACO (See face contract)

DLA/PCO (See face contract) group:

total_price:

prep_name: Heath Tinnin line_item:

exhibit: A xtdp: Off xtm: Off othercat:

system: F100-PW-220/220E/229/229EEP Module ctr_no: FD2030-23-30034 contr: Pratt and Whitney remarksb:

Page2:

Reset:

2023-09-12T14:55:58-0500

TINNIN.HEATH.WAYNE.1271989586

prep_date: 12 Sept 23 app_by: Diana Beck

2023-09-12T15:39:57-0500

BECK.EUNHEE.DIANA.1268141541

app_date: 12 Sept 23

Page:

of_pages:

app: Adobe Professional 8.0

Source: http://assist.dla.mil -- Downloaded: 2023-08-28T17:50Z

DDFORM 1653 APR 1999 (PREVIOUS EDITIONS ARE OBSOLETE) 406 SCMS/GUMA OVERPRINT

TRANSPORTATION DATA FOR SOLICITATIONS

(USE REVERSE FOR ADDITIONAL REMARKS)

1. PR. PO or MIPR NUMBER 2. DATE (PR RECEIVED)

3. COMMODITY

NMFC:

DATA/FIRST ARTICLE: FOB DESTINATION

4. STOCK NUMBER

5. F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT (X ONE OR MORE)

A. ORIGIN C. OTHER – (DESTINATION APOE/WPOE)

B. DESTINATION

6. TRANSPORTATION PROVISIONS / CLAUSES (X APPROPRIATE BLOCKS) 7. FAR CITATION

a.

b. REPORT OF SHIPMENT (REPSHIP)(FEB 2006) 52.247-68

c. COMMERCIAL BILL OF LADING NOTATIONS(FEB 2006) 52.247-1

d. F.O.B. ORIGIN (FEB 2006) 52.247-29

e. F.O.B. ORIGIN WITH DIFFERENTIALS (FEB 2006) 52.247-33

f. F.O.B. DESTINATION (NOV 1991) 52.247-34

g. F.O.B. ORIGIN AND/OR DESTINATION EVALUATION (APR 1984) 52.247-45

h. SHIPPING POINT (S) USED IN EVALUATION OF F.O.B. ORIGIN OFFERS (APR 1984) 52.247-46

i. EVALUATION – F.O.B. ORIGIN (JUN 2003) 52.247-47

j. F.O.B. DESTINATION – EVIDENCE OF SHIPMENT (FEB 1999) 52.247-48

k. DESTINATION – UNKNOWN (APR 1984) 52.247-49

l. NO EVALUATION OF TRANSPORTATION COSTS (APR 1984) 52.247-50

m. EVALUATION OF EXPORT OFFERS (JAN 2001) 52.247-51

n. CLEARANCE AND DOCUMENTATION REQUIREMENTS-SHIPMENTS TO DOD AIR OR WATER

TERMINAL TRANSSHIPMENT POINTS (FEB 2006)

52.247-52

o. FREIGHT CLASSIFICATION DESCRIPTION (APR 1984) IAW CONTRACT 52.247-53

p. F.OB. POINT FOR FMS SHIPMENTS ORIGINATING OUTSIDE THE U.S. (FMS) (JUL 1997) See CONTINUATION

q. F.O.B. POINT OF DELIVERY OF GOVERNMENT – FURNISHED PROPERTY (JUN 2003) 52.247-55

r. TRANSIT ARRANGEMENTS (APR 1984) 52.247-56

s. TRANSPORTATION TRANSIT PRIVILEGE CREDITS (APR 1984) 52.247-57

t. LOADING, BLOCKING, AND BRACING OF FREIGHT CARS (APR 1984) 52.247-58

u. F.O.B. ORIGIN – CARLOAD AND TRUCKLOAD SHIPMENTS (APR 1984) 52.247-59

v. GUARANTEED SHIPPING CHARACTERISTICS (DEC 1989) 52.247-60

w. F.O.B. ORIGIN – MINIMUM SIZE OF SHIPMENTS (APR 1984) 52.247-61

x. MARKING OF SHIPMENTS

y. F.O.B. ORIGIN – PREPAID FREIGHT (FEB 2006), * SEE 6Z BELOW 52.247-32

8. EVALUATION OF PORT BIDS OR PROPOSAL (Ports and combined handling and transportation charges per measurement ton used by the Government for evaluation purposes).

a. DESTINATION COUNTRIES b. ORIGIN PORTS (Air or Water)

BAYONNE NJ

NORFOLK VA

CONCORD CA

SEATTLE WA

6Z. NOTE TO CONTRACTOR: CONTACT CTO IF PROBLEMS ARISE. SHIP DOOR-TO-DOOR COMMERCIAL EXPRESS CARRIER SERVICE FOR MOVEMENT OF MICAP AND PROJECT CODES (TP-1 AND TP-2/RDD 777): 122, 123,700, 780 (WITH RESTRICTIONS), 879, 880, 9FF, 9FV, 9FX, 9GF, 9GJ, 9GV, 9GS, 9GD, SURGE and 720.

(X) SEE REVERSE

a. TYPED OR PRINTED NAME (Last, First, Middle) b. SIGNATURE c. DATE (YYYYMMDD)

PR:

DD FORM 1653: ADDITIONAL TRANSPORTATION DATA FROM: 406 SCMS/GULAA

1. REMARKS

A. FOREIGN MILITARY SALES:

(1) NOTE TO CONTRACTOR: FOREIGN MILITARY SALES: 10-15 DAYS PRIOR TO

SHIPMENT, CONTACT THE DCMA/ ACO TRANSPORTATION OFFICE FOR SHIPPING

ADDRESS / INSTRUCTIONS.

(2) FOR REPAIR & RETURN FMS: ALL INBOUND SHIPPING DOCUMENTS MUST BE

MAINTAINED FOR USE IN OUTBOUND SHIPPING.

(3) EVIDENCE OF SHIPMENT (FMS) FOREIGN MILITARY SALES

(4) TEMPORARY STORAGE OF FMS MUNITIONS ITEMS

B. CLASSIFIED MATERIAL: TRANSPORTATION MUST BE BY CARRIERS THAT PROVIDE DOD

CONSTANT SURVEILLANCE SERVICE (DOD CSS) IAW DOD 4500.9-R.

C. SHIPPING INSTRUCTIONS (See Page 3 and page 4 if required)

D. SAME AS BASIC PR WITH NOTED CHANGES

E. BASIC CONTRACT NUMBER

F. F.O.B. POINT FOR U.S.Shipments ORIGINATING OUTSIDE THE CONTINENTAL U.S. (SEE Continuation page)

G. 52.247-38 – F.O.B. – INLAND CARRIER, POINT OF EXPORTATION. (FEB 2006)

H. NOTE TO CONTRACTOR: OCONUS Shipments Only: "Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System at http://www.dcma.mil for ALL FOB: Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated." Failure to contact the DCMA may result in additional expenditures borne by the vendor." The Contractor Shall Provide a DD Form 1149 For Each Shipment Prior to DCMA notification. The DD Form 1149 will be included with each shipment

I. NOTE TO BUYER: IF NECESSARY TO DEVIATE FROM THIS DOCUMENT, CONSOLIDATE WITH ANOTHER PR, MIPR, SI, ASI OR ANTICIPATE AWARD TO OVERSEAS ORIGIN POINT REQUEST YOU RECOORDINATE WITH 406

SCMS/GUMA FOR INCLUSION OF ADDITIONAL FAR CLAUSES

2. ESTIMAOR CHANGES TED SHIPPTO ING CHAROUR ORIGINAL ACTERISTICS:RECOMMENDATIONS.

3. TRANSPORTATION APPROPRIATION CHARGEABLE:

4. FAST TRANSPORTATION

(a) Domestic shipments – use door-to-door carriers for all shipments regardless of weight.

(b) Export shipments – use Worldwide Express (WWX) for all shipments of 0-300 pounds.

Contact The Cognizant Transportation Officer (CTO) if commercial services are not available.

(c) Foreign Military Sales (FMS) shipments are excluded from these requirements.

Beverly Brown, Supervisor Transportation & Packaging (406 SCMS/GULAA) Mission Support Section (04/25/2021)

PR:

SHIP TO:

4 STOCK NUMBER:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow1: X

7 FAR CITATIONa:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow2:

b REPORT OF SHIPMENT REPSHIPFEB 2006:

5224768:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow3:

c COMMERCIAL BILL OF LADING NOTATIONSFEB 2006:

522471:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow4:

d FOB ORIGIN FEB 2006:

5224729:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow5:

e FOB ORIGIN WITH DIFFERENTIALS FEB 2006:

5224733:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow6:

f FOB DESTINATION NOV 1991:

5224734:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow7:

g FOB ORIGIN ANDOR DESTINATION EVALUATION APR 1984:

5224745:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow8:

5224746:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow9:

i EVALUATION FOB ORIGIN JUN 2003:

5224747:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow10:

j FOB DESTINATION EVIDENCE OF SHIPMENT FEB 1999:

5224748:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow11:

k DESTINATION UNKNOWN APR 1984:

5224749:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow12:

l NO EVALUATION OF TRANSPORTATION COSTS APR 1984:

5224750:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow13:

m EVALUATION OF EXPORT OFFERS JAN 2001:

5224751:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow14:

5224752:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow15: X

5224753:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow16:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow17:

5224755:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow18:

r TRANSIT ARRANGEMENTS APR 1984:

5224756:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow19:

s TRANSPORTATION TRANSIT PRIVILEGE CREDITS APR 1984:

5224757:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow20:

5224758:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow21:

5224759:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow22:

v GUARANTEED SHIPPING CHARACTERISTICS DEC 1989:

5224760:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow23:

w FOB ORIGIN MINIMUM SIZE OF SHIPMENTS APR 1984:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow24:

5224761x MARKING OF SHIPMENTS:

6 TRANSPORTATION PROVISIONS CLAUSES X APPROPRIATE BLOCKSRow25:

y FOB ORIGIN PREPAID FREIGHT FEB 2006 SEE 6Z BELOW:

5224732:

b ORIGIN PORTS Air or Water:

a DESTINATION COUNTRIESRow1:

BAYONNE NJ:

a DESTINATION COUNTRIESRow2:

NORFOLK VA:

a DESTINATION COUNTRIESRow3:

CONCORD CA:

a DESTINATION COUNTRIESRow4:

SEATTLE WA:

c DATE YYYYMMDD: 2023-09-19

1 PR PO or MIPR NUMBER: FD2030-23-30034

5C: Yes

5B: Off

5A: Off

6A: to establish a follow-on for F100 Module Contract FA8121-19-D-0005

2023-09-19T05:52:20-0400

CARTER.GLENN.A.1063058161

Dropdown6: [CARTER, GLENN A]

TACS: []

CONTRACT:

1A1: Off

4C: Off

4B: Off

4A: Off

TAC: Off

C: Off

D: Off

E: Off

F: Off

G: Off

H: Yes

1A2: Off

1A3: Off

SHIP TO 1:

SHIP TO 2:

SHIP TO 3:

None: Planning PR

Derek Belflower, Supervisor: Derek Belflower, Supervisor

DCMA INST: [DCMA is to apply the appropriate TAC based on the mode of transportation chosen at execution]

I: Yes

5D: Off

2 DATE PR Received: 2023-09-19

1A4: Off

ESTIMATE: Yes

Title: Acquisition and Sustainment Data Package (ASDP) Teardown Deficiency Report

Number: DI-PSSS-81534B Approved Date: 20220809

AMSC Number: F10348 Limitation: N/A

DTIC Applicable: No GIDEP Applicable: No

Preparing Activity: 11 (AFLCMC/EZSC) Project Number: PSSS-2022-004

Applicable Forms: N/A

Use/Relationship: The Acquisition and Sustainment Data Package (ASDP) Teardown Deficiency Report provides a factual narrative analysis of a deficiency which has been noted on equipment.

a. This Data Item Description (DID) is applicable when contractors are responsible for maintaining custodial records for government property being repaired, or, when detailed analysis is required for components undergoing a teardown investigation.

b. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in the solicitation.

c. This DID supersedes DI-PSSS-81534A.

1. Reference documents. None.

2. Format. The ASDP Teardown Deficiency Report shall be in a text searchable format. If a model (e.g., Cameo, CAD, etc.) is used for the analysis or resolution of problems, the model shall be embedded in its native format. The Data Objects/Attributes and Associated Metadata (DOAM) listing shall be in Microsoft Excel spreadsheet format in accordance with the template provided in the DOAM Specification attached to the contract. All data shall be in the English language.

3. Content. The Teardown Deficiency Report shall include an analysis of the deficiency which includes cause of failure, recommended corrective action and recommendations for actions to prevent recurrence of the failure/deficiency, and the applicable category of the failure defined as follows:

a. Workmanship and non-conformance. Any deficiency (e.g., physical, chemical, electrical, functional) noted in materiel which is attributed to non-conformance to applicable specifications, drawing, standards, or Technical Order (TO); or workmanship during manufacture, repair modification or maintenance.

b. Material failure. The failure of an end item which was attributable to neither the repair nor the manufacturing process, but was due to an unpredictable failure of an internal component or sub-assembly.

c. No defect found/could not duplicate: Investigation of the exhibit revealed no deficiency.

Equipment conforms to specifications and TO standards and procedures.

d. Technical data, deficiency: Technical data (including TOs, drawings, and work specifications) was deficient or inadequate so as to cause the deficiency/failure on the item.

Source: http://assist.dla.mil -- Downloaded: 2023-08-28T18:29Z

DI-PSSS-81534B

e. Field induced deficiency. Deficiency confirmed by the investigation to have been caused by operator error, i.e., wrong voltage applied, misaligned, maladjusted, mishandling, or not used for intended purpose.

f. Maintenance deficiency. An unfavorable characteristic of an item that impedes the accomplishment of maintenance operations which results in excessive maintenance operations and/or in excessive maintenance man-hour consumption.

g. Design deficiency. A condition that limits or prevents the use of material for purpose intended or required where the material meets all other specifications.

h. Handling or shipping deficiency. A deficiency induced by improper handling or shipping, i.e., improper packaging, which prohibits the use for intended purpose.

i. Packaging specifications inadequate - not complied with. Unsatisfactory conditions including item damage resulting from improper packaging.

3.1 DOAM. The completed Teardown Deficiency Report template, provided in the DOAM Specification attached to the contract, shall comply with the format requirements (see 2. above) so that it can be ingestible into a Product Lifecycle Management (PLM) solution to ensure proper tying, tracing, and linking to the lowest component of the end item to which the delivered Teardown Deficiency Report Information is applicable. Any field that is not applicable shall be marked “NA.”

End of DI-PSSS-81534B.

Source: http://assist.dla.mil -- Downloaded: 2023-08-28T18:29Z

Continuation Sheet, AFMC Form 158, Part 1, Packaging Requirements

PR, MIPR, OR OTHER DOCUMENT NUMBER

FD2030-23-30034

ITEM NAME(s) QUP SPECIAL PACKAGING

OR PRES PACK PRES PACK CBP INSTRUCTIONS

NSN/MMAC # (X) (A/B/M) (X) (X) (X) NUMBER

1-AA - 3-AA, 2840-01-455-7198 NZ 001 X A 8145-01-451-2435 SEE PART 3 & 4

4-AA - 6-AA 2840-01-536-1795 NZ 001 X A 8145-01-452-4579 SEE PART 3 & 4

7-AA, 2840-01-341-0171 NZ 001 X A 8145-01-452-4579 SEE PART 3 & 4

8-AA - 10-AA 2840-01-447-8547 NZ 001 X A 8145-01-450-3984 SEE PART 3 & 4

11-AA, 2835-01-528-5237 NZ 001 X A 8145-01-452-4582 SEE PART 3 & 4

12-AA, 2840-01-445-7506 001 X B SEE PART 3 NO PACKAGING DATA AVAILABLE

13-AA, 2840-01-453-1639 NZ 001 X A 8145-01-452-2828 SEE PART 3 & 4

14-AA, 2840-01-550-7832 NZ 001 X A 8145-01-452-2828 SEE PART 3 & 4

15-AA, 2840-01-536-1795 NZ 001 X A 8145-01-452-4579 SEE PART 3 & 4

16-AA - 17-AA, 2840-01-580-6609 NZ 001 X A 8145-01-451-2435 SEE PART 3 & 4

18-AA - 19-AA, 2840-01-619-3228 NZ 001 X A 8145-01-450-3984 SEE PART 3 & 4

20-AA, 2840-01-534-8856 NZ 001 X A 8145-01-452-4579 SEE PART 3 & 4

21-AA, 2840-01-582-2797 NZ 001 X A 8145-01-452-4579 SEE PART 3 & 4

22-AA, 2840-01-491-4115 NZ 001 X A 8145-01-452-2828 SEE PART 3 & 4

23-AA, 2840-01-549-3031 NZ 001 X A 8145-01-452-2828 SEE PART 3 & 4

24-AA - 25-AA, 2840-01-582-2796 NZ 001 X A 8145-01-452-4582 SEE PART 3 & 4

26-AA NO PACKAGING DATA REQUIRED

MIL-STD-2073-1 ASTM D3951

COMMERCIAL

1. Packaging Requirements: MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B and Minimum (M). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) and Commercial Best Practice (CBP) are abbreviated.

LGITL FORM 02, AUG 02 PREVIOUS EDITION IS OBSOLETE.

1. Packaging Requirements: MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B and Minimum (M). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) and Commercial Best Practice (CBP) are abbreviated.

1. Packaging Requirements: MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B and Minimum (M). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) and Commercial Best Practice (CBP) are abbreviated.

1. Packaging Requirements: MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B and Minimum (M). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) and Commercial Best Practice (CBP) are abbreviated.

PACKAGING REQUIREMENTS FOR ITEMS

SHIPPED IN RESPONSE TO AMENDED SHIPPING INSTRUCTIONS (ASI),

AND TO SHIPPING INSTRUCTIONS (SI) WHEN SI IS NOT

PROVIDED IN BASIC CONTRACT OR ORDER

DEFINITIONS:

ASI - AMENDED SHIPPING INSTRUCTIONS PACK - PACKING

CONUS - CONTINENTAL UNITED STATES PRES - PRESERVATION

FMS - FOREIGN MILITARY SALES SI - SHIPPING INSTRUCTIONS

MAP - MILITARY ASSISTANCE PROGRAM SPI - SPECIAL PACKAGING INSTRUCTION

O/S - OVERSEAS

UNLESS OTHERWISE STIPULATED AS PART OF A PARTICULAR ASI OR SI, ITEM(s) BEING SHIPPED IN RESPONSE TO ASI's OR SI's TO THIS CONTRACT WILL BE PRESERVED AND PACKED IN ACCORDANCE WITH THE REQUIREMENTS OF MIL-STD-2073-1 TO COMPLY WITH THE LEVEL(s) STIPULATED BELOW. ITEMS FOR WHICH A SPI/SPECIFICATION IS STIPULATED ON THE AFMC FORM 158/158A ATTACHED TO THE BASIC CONTRACT WILL BE PROCESSED IN ACCORDANCE WITH THE SPI/SPECIFICATION REQUIREMENT FOR THE APPROPRIATE LEVEL(s) STIPULATED BELOW. ITEMS USING PPP-B-1672 CONTAINERS REQUIRE COMPLIANCE WITH THE UNIT CONTAINER OF THE TYPE AND SIZE SPECIFIED IN THE CODED PRESERVATION DATA. REPACKAGING OF ITEMS WHICH HAVE BEEN PRESERVED, OR PACKED TO A LEVEL WHICH EXCEEDS THE REQUIREMENT SPECIFIED BELOW IS REQUIRED WHEN DELAY OF SHIPMENT IS PERMISSIBLE, AND SAVINGS TO BE REALIZED IN PACKAGING AND TRANSPORTATION COSTS WILL EXCEED THE TOTAL COSTS OF SUCH REPACKAGING. ALL CHANGES IN PRESERVATION AND PACKING REQUIRED IN RESPONSE TO AN ASI OR SI SHALL BE REPORTED TO THE RESPONSIBLE ADMINISTRATIVE CONTRACTING OFFICER FOR ANALYSIS. ANY CHANGES IN COST OF PERFORMANCE RESULTING FROM ASI's OR SI's WILL BE PROCESSED IN ACCORDANCE WITH THE CLAUSE OF THIS CONTRACT

ENTITLED "CHANGES."

REQUIRED LEVEL

DESTINATION USE/TRANSPORTATION MODE PRESS PACK

CONUS IMMEDIATE USE OR INSTALLATION C C

CONUS CONSUMABLE FOR IMMEDIATE USE OR INSTALLATION INDUSTRIAL*

CONUS AIR FORCE STOCK A B/C

O/S or CONUS WAR READINESS MATERIAL (WRM) A B

O/S AIR SHIPMENTS INSTALLATION OR IMMEDIATE USE C C

O/S CONSUMABLE AIR SHIPMENT FOR IMMEDIATE USE OR INSTALLATION INDUSTRIAL*

O/S SURFACE SHIPMENTS NOT CONTAINERIZED A A

O/S SURFACE SHIPMENTS CONTAINERIZED A C

O/S FMS/MAP NOT FOR IMMEDIATE USE OR INSTALLATION A A/B

* WHEN INDUSTRIAL PACKAGING IS USED, COMPLY WITH ASTM D 3951 OR NAS 855

AFLC/AFSC FORM 158, MAR 92 (REVERSE)

AFMC FORM 158, EFFECTIVE JUL 92

1 1-AA - 3-AA

2 4-AA - 6-AA

3 7-AA

4 8-AA - 10-AA

5 11-AA

6 12-AA

7 13-AA

8 14-AA

9 15-AA

10 16-AA - 17-AA

11 18-AA - 19-AA

12 20-AA

13 21-AA

14 22-AA

15 23-AA

16 24-AA - 25-AA

CONTINUATION SHEET 158 PART 3

PACK IAW T.O.2J-F100-24/CONTAINER NSN 8145-01-451-2435 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-24/CONT NSN 8145-01-452-4579 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-24/CONT NSN 8145-01-452-4579 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-24/CONT NSN 8145-01-450-3984 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100/220/CONT NSN 8145-01-452-4582 NZ AND MARKED IAW MIL-STD-129R. ALT. C

ITEMS SHALL BE PACKAGED IAW MIL-STD-2073-1E AND MARKED IAW MI

PACK IAW TO 2J-F100/CONT NSN 8145-01-452-2828 NZ AND MARKED IAW MIL-STD-129R. ALT. CONT

PACK IAW T.O.2J-F100-24/CONT NSN 8145-01-452-4579 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100/229-54/CONT NSN 8145-01-451-2435 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-54/CONT NSN 8145-01-450-3984 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-54/CONT NSN 8145-01-452-4579 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW T.O.2J-F100-54/CONT NSN 8145-01-452-4579 NZ AND MARKED IAW MIL-STD-129R.

PACK IAW TO 2J-F100/CONT NSN 8145-01-452-2828 NZ AND MARKED IAW MIL-STD-129R. ALT. CONT

PACK IAW T.O.2J-F100/229-54/CONT NSN 8145-01-452-4582 NZ AND MARKED IAW MIL-STD-129R.

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates o

ONTAINER SPI#01-016-3896.

L-STD-129R.

SPI# 01-550-7832.

SPI#01-550-7832.

f required specifications)

Continuation Sheet, AFMC Form 158, Part 4, Coded Data

FD2030-23-30034 EXHIBIT B CONTINUATION SHEET

CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1.

QUP PRES C PRES WRAP CUSH C UNIT INT SPEC UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE QUP ICQ MET D MTL MTL DUNN T CONT CONT MKG 10 LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000th

ITEM

0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z Z Z A Z Z 1 1 8 0 0 0 5 6 0 0 5 6 0 0 4 4 0 0 0 7 9 8 5 1 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 3 0 9 6 0 1 0 2 0 0 6 1 0 0 6 6 0 0 2 3 7 6 4 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 3 0 9 6 0 1 0 2 0 0 6 1 0 0 6 6 0 0 2 3 7 6 4 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 3 0 6 0 0 0 9 6 0 0 6 8 0 0 6 0 0 0 2 2 6 6 6 6 A

1-AA - 3-AA, 2840-01-455-7198 NZ

4-AA - 6-AA 2840-01-536-1795NZ

7-AA, 2840-01-341-0171 NZ

8-AA - 10-AA 2840- 01-447-8547 NZ

U C L

O P I

LGITL Form 03, 04 Mar 00 PREVIOUS EDITION IS OBSOLETE

QUP ICQ MET D MTL MTL DUNN T CONT CONT MKG 10 LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000th

0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 0 7 9 0 0 0 4 2 0 0 4 2 0 0 3 1 0 0 0 3 1 6 4 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 0 1 3 0 0 0 3 3 4 0 2 7 4 0 2 1 9 0 0 1 1 5 9 8 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 0 1 3 0 0 0 3 3 4 0 2 7 4 0 2 1 9 0 0 1 1 5 9 8 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 3 0 9 6 0 1 0 2 0 0 6 1 0 0 6 6 0 0 2 3 7 6 4 5 A 0 0 1 0 0 0 Z Z 1 0 0 Z Z Z Z Z Z Z 0 0 A Z Z 1 2 7 7 0 0 5 6 0 0 5 6 0 0 4 4 0 0 0 7 9 8 5 1 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 1 4 0 0 0 0 9 2 0 0 5 1 0 0 4 6 0 0 1 2 4 9 0 2 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 1 0 8 0 0 0 9 0 0 0 6 0 0 0 6 5 0 0 2 0 3 1 2 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 1 0 8 0 0 0 9 0 0 0 6 0 0 0 6 5 0 0 2 0 3 1 2 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 0 1 3 2 0 0 3 3 4 0 2 7 4 0 2 1 8 0 0 1 1 5 4 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 0 1 3 2 0 0 3 3 4 0 2 7 4 0 2 1 8 0 0 1 1 5 4 5 A 0 0 1 0 0 0 Z Z Z Z Z Z Z Z Z Z Z Z 0 0 A Z Z 1 2 0 0 0 0 4 2 0 0 4 2 0 0 3 1 0 0 0 3 1 6 4 5 A24-AA - 25-AA, 2840-01-582-2796 NZ

11-AA, 2840-01-528-5237 NZ

13-AA, 2840-01-453-1639 NZ

14-AA, 2840-01-550-7832 NZ

15-AA, 2840-01-536-1795 NZ

16-AA - 17-AA, 2840-01-580-6609 NZ

18-AA - 19-AA, 2840-01-619-3228 NZ

20-AA, 2840-01-534-8856 NZ

21-AA, 2840-01-582-2797 NZ

22-AA, 2840-01-491-4115 NZ

23-AA, 2840-01-549-3031 NZ

QUP ICQ MET D MTL MTL DUNN T CONT CONT MKG 10 LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000th

QUP ICQ MET D MTL MTL DUNN T CONT CONT MKG 10 LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000th

AFMC FORM 158 PART 1

Reverse PART 2

CONTIN. SHEET PART 3

CONTIN. SHEET PART 4

Title: SIGNIFICANT MAINTENANCE HISTORICAL DOCUMENTATION

Number: DI-MGMT-81564A Approved Date: 20180904 AMSC Number: F9978 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFMC/A4UE) Project Number: MGMT-2015-039 Applicable Forms: AFTO Form 95 Use/Relationship: The Significant Maintenance Historical Documentation report is required to provide serialized tracking of end items and components repaired during overhaul and will be used by Equipment Specialists, Item Managers, and Engineers to determine the reliability and life span of a part.

a. This Data Item Description (DID) contains the format, content, and intended use information for the data deliverable resulting from the work task described in the solicitation.

b. This DID supersedes DI-MGMT-81564.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. AFTO Form 95, Significant Historical Data, or contractor generated facsimile shall be used.

(Copies of this form are available online at http://www.e-publishing.af.mil/.)

3. Content. Significant maintenance actions during overhaul/repair shall be entered in accordance with the Maintenance Historical Documentation chapter found in Technical Order (TO) 00-20-1, Aerospace Equipment Maintenance Inspection, Documentation, Policies, and Procedures.

(Copies of this document are available online at http://www.tinker.af.mil/Home/Technical- Orders/ or https://www.my.af.mil/etims/ETIMS/index.jsp.)

End of DI-MGMT-81564A.

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Source: http://assist.dla.mil -- Downloaded: 2023-08-28T17:56Z http://www.e-publishing.af.mil/ http://www.tinker.af.mil/Home/Technical-Orders/ http://www.tinker.af.mil/Home/Technical-Orders/ https://www.my.af.mil/etims/ETIMS/index.jsp

PACKAGING REQUIREMENTS

AFMC FORM 158, 20221014

CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.

1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).

ITEM ID

QUP

MIL-STD-2073-1

PRES PACK

(X) (A/B)

ASTM D3951

PACKPRES

(X) (X)

SPECIAL

PACKAGING

INSTRUCTION

NUMBER

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)

A. ENGINEERED OR SPECIALIZED CONTAINER (CDRS) ITEM NAME(s) OR

NSN/MMAC

B. PACKAGING OF HAZARDOUS MATERIALS ITEM NAME(s) OR NSN/ MMAC FAR Clause 52.223-3, Hazardous Material Identification and Material Safety Data

C. PACKAGING DATA (Coded and/or Special Packaging Instructions) ITEM NAME(s) OR NSN/MMAC FAR Clause 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in Acquisition Streamlining and Standardization Information System

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

ORGANIZATION PACKAGING SPECIALIST (Typed Name)

QUP ICQ MOP CD CT UNIT

CONT

INT

CONT UCL SPECIAL

MARKINGS

UNIT

PACK

WEIGHT

LENGTH

OPI

WIIDTH

DEPTH

CUBE

PACKAGING SPECIALIST SIGNATURE DATE

PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

ITEM(S) CUSH

DUNN

WRAP

MTL

PRES

MTL

AFMC FORM 158, 20221014 Page 2 of 2 Pages

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE

REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER

BASES).

WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”

3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.

A. Engineered or Specialized Containers (CDRS)

a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.

B. Packaging and Marking of Hazardous Material

Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .

C. Packaging Data (Coded and/or Special Packaging Instructions)

The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special Packaging Instructions, apply.

PACKAGING REQUIREMENTS

AFMC FORM 158, 20221014

3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.

1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).

ITEM ID

QUP

MIL-STD-2073-1

PRES

PACK

(X)

(A/B)

COMMERCIAL ASTM D3951

PACK

PRES

(X)

(X)

SPECIAL PACKAGING INSTRUCTION NUMBER

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

QUP

ICQ

MOP

CD

CT

UNIT CONT

INT CONT

UCL

SPECIAL MARKINGS

UNIT PACK WEIGHT

UNIT PACK LENGTH

OPI

UNIT PACK WIIDTH

UNIT PACK DEPTH

UNIT PACK

CUBE

PREVIOUS EDITIONS ARE OBSOLETE

Page 1 of 2 Pages

ITEM(S)

CUSH DUNN

WRAP MTL

PRES MTL

AFMC FORM 158, 20221014

Page 2 of 2 Pages

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE

REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS

SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN

BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND

PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER

BASES).

WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM

DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE

LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”

3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.

A. Engineered or Specialized Containers (CDRS)

a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard

Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.

B. Packaging and Marking of Hazardous Material

Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the…