SPI_014633341.pdf
PDF 300 KB Posted
- Attached to
- F-117 CAD/PAD
- Solicitation number
- FA821326R3053
About this file
This is a Special Packaging Instruction (SPI) document for the detonator, electric item, with CDDE ID 98747 and SPI number F01-463-3341.
The document provides detailed military preservation, packing, and marking requirements for shipping detonators in compliance with MIL-STD-2073 for military preservation and MIL-STD-129 for marking. Packing specifications are defined at two levels: Level A uses ASTM D6251 standards with RSC style containers, while Level B uses ASTM D5118 standards. Level A containers measure 10 inches in length and width with unspecified depth; Level B containers are 10 3/8 inches by 10 3/8 inches by 16 3/4 inches. Gross weights are specified as approximately 1.043 cubic feet for Level A and 10 cubic feet for Level B, with design fragility ratings of 80 for both levels. Individual items vary in dimensions and weight. Proper shipping requires wrapping items with tape (ASTM D5486 Type I or V), placing wrapped items in barrier bags (MIL-DTL-117 Type I), using cushioning material (A-A-1898), and sealing in shipping containers (ASTM D5118 RSC, V3c) with strapping (MIL-PRF-81705 Type I). The instruction mandates compliance with International Standards for Phytosanitary Measures (ISPM No. 15) for wood packaging material, requiring all wooden components to be debarked and heat-treated to 56 degrees Centigrade or 133 degrees Fahrenheit for 30 minutes with certification from an accredited agency. Munition notices address Class I explosive materials, hazard classification requirements, and provisions for previous packaging editions. Up to ten bagged items may be placed in a single shipping container. The document includes an exploded assembly diagram and a palletization procedure for Level B packs showing strapping, edge protectors, and pallet configuration specifications with total weight calculations of 483.35 pounds per pallet.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8213-26-R-3053 0001.pdf | ||
| All JHCS IHC.pdf | ||
| SPI_013462222.pdf | ||
| REPSHIP.pdf | ||
| SPI_014632595.pdf | ||
| SPI_013462223.pdf | ||
| CADPAD Item Marking Instruction.pdf | ||
| ES7034.pdf | ||
| Item Descriptions.pdf | ||
| CDRLs.pdf | ||
| ADC SOW.pdf | ||
| AIR SPEC.pdf | ||
| FA8213-26-R-3053.pdf | ||
| SPI_011676621.pdf | ||
| Packaging SOW.pdf |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
MUNITION NOTICES
NOTES
1. WRAP ITEM WITH REF.-4, PLACE WRAPPED ITEM INSIDE BAG, REF.-3, AND SEAL.
2. PLACE BAGGED ASSET IN SHIPPING CONTAINER, REF.-1, USING SUFFICIENT CUSHIONING, REF.-2, TO PREVENT
MOVEMENT. SEAL CONTAINER WITH TAPE, REF.-5.
3. PLACE UP TO TEN (10) BAGGED ITEMS INSIDE REF.-1, SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .