SPI_013462223.pdf
PDF 985 KB Posted
- Attached to
- F-117 CAD/PAD
- Solicitation number
- FA821326R3053
About this file
This is a Special Packaging Instruction (SPI) document issued by the U.S. Air Force for the packaging and shipment of aircraft canopy removers. The document is controlled by 406 SCMS at Gulfport-Columbus Air Force Base and contains Controlled Unclassified Information (CUI) with restricted dissemination limited to federal contracting activities.
The SPI specifies detailed packaging requirements for National Stock Number 1377-01-346-2223, with two packing levels defined. Level A packing is required for the most severe worldwide shipment, handling, and storage conditions including war reserve material, mobilization, strategic and theater deployment, and open storage. Level B represents standard commercial packing. The document mandates military preservation per MIL-STD-2073-1, cleaning and drying requirements, and specific marking protocols including the SPI number, proper shipping name (cartridges, power device), and UN/DOT markings (4G/Y7/S/**, USA/DOD/AF70). Packaging materials include tape (ASTM D5330 Type IV filament and ASTM D5486 Type I packaging tape), wrap (MIL-PRF-81705 Type I), barrier bags (MIL-DTL-117 Type 1, Style 1), and cushioning (A-A-1898 Grade II). The instructions incorporate international phytosanitary standards requiring all wood packaging materials to be debarked and heat-treated to 56 degrees Celsius for 30 minutes with ALSC certification. Palletization must comply with MIL-STD-1660 for ammunition and explosives, and hazard classification documentation must accompany all shipments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8213-26-R-3053 0001.pdf | ||
| All JHCS IHC.pdf | ||
| SPI_013462222.pdf | ||
| REPSHIP.pdf | ||
| SPI_014632595.pdf | ||
| CADPAD Item Marking Instruction.pdf | ||
| SPI_014633341.pdf | ||
| ES7034.pdf | ||
| Item Descriptions.pdf | ||
| CDRLs.pdf | ||
| ADC SOW.pdf | ||
| AIR SPEC.pdf | ||
| FA8213-26-R-3053.pdf | ||
| SPI_011676621.pdf | ||
| Packaging SOW.pdf |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
NOTES
1. WRAP ITEM IN REF.-3, PLACE IN BARRIER BAG, REF.-2. REMOVE AIR AND SEAL.
2. PLACE IN SHIPPING CONTAINER, USE CUSHIONING, REF.-1, TO PROVIDE A SNUG FIT AND PREVENT MOVEMENT.
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 4: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 5: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .