SPI_014632595.pdf
PDF 947 KB Posted
- Attached to
- F-117 CAD/PAD
- Solicitation number
- FA821326R3053
About this file
This is a Special Packaging Instruction (SPI) document that provides detailed requirements for packaging a Charge Assembly, Shaped item (National Stock Number 1377-01-463-2595 ES, CODE ID 98747) for military preservation and shipment.
The document specifies packaging procedures compliant with Military Preservation standard MIL-STD-2073-1 and includes both serviceable (Level A) and unserviceable (Level B) methods. The item must be completely wrapped in material (REF-6), placed on a 1/8-inch plywood stiffener secured with item ties, wrapped in cushioning material, and placed in a barrier bag with air removed and sealed. The packaged item and stiffener are then placed in a wooden shipping container with additional cushioning to ensure a tight fit. Up to two items may be packaged per shipping container. Container dimensions vary by level: Level A measures 90x12x11½ inches (center ID) and 92¼x14¼x17¼ inches (center OD), while Level B maintains identical center dimensions. The gross weight is 19.985 cubic feet and 90 pounds for both levels. All wooden containers must be constructed from minimum 3/8-inch plywood without staples, and all wood packaging materials must comply with International Standards for Phytosanitary Measures (ISPM No. 15), requiring debarked wood and heat treatment to 56 degrees Centigrade (133 degrees Fahrenheit) for 30 minutes with certification by an accredited agency recognized by the American Lumber Standards Committee. The document is controlled by 406 SCMS at GULAA-Hill AFB and marked as CUI with distribution limited to FEDCON.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA8213-26-R-3053 0001.pdf | ||
| All JHCS IHC.pdf | ||
| SPI_013462222.pdf | ||
| REPSHIP.pdf | ||
| SPI_013462223.pdf | ||
| CADPAD Item Marking Instruction.pdf | ||
| SPI_014633341.pdf | ||
| ES7034.pdf | ||
| Item Descriptions.pdf | ||
| CDRLs.pdf | ||
| ADC SOW.pdf | ||
| AIR SPEC.pdf | ||
| FA8213-26-R-3053.pdf | ||
| SPI_011676621.pdf | ||
| Packaging SOW.pdf |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DO NOT USE STAPLES FOR ASSEMBLY
OF WOODEN CONTAINERS.
MINIMUM OF 3/8 PLYWOOD MUST BE
USED FOR CONSTRUCTION
CONSTRUCTION NOTICES:
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
MUNITION NOTICES
NOTICE 1 : ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTES
1. COMPLETELY WRAP ITEM IN REF.-6 LAY WRAPPED ITEM ON PLYWOOD STIFFENER, REF.-5, USING ITEM TIES, REF.-4, TO
SECURE ITEM TO STIFFENER.
2. WRAP ITEM AND STIFFENER IN CUSHIONING, REF.-2, AND PLACE IN BARRIER BAG, REF.-3, REMOVE AIR AND SEAL.
3. PUT CUSHIONING, REF.-2, IN SHIPPING CONTAINER. PUT ITEM IN SHIPPING CONTAINER, AND USE CUSHIONING, REF.-2, TO MAKE A TIGHT FIT.
4. MAY PUT UP TO TWO (2) ITEMS IN SHIPPING CONTAINER.
5. IF ITEM IS UNSERVICEABLE, TAPING BAG CLOSED IS AUTHORIZED.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .