Solicitation - FA663322R0001.pdf

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION

CALL:

a. NAME b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

11. The contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory negotiable. (See ).

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

12b. CALENDAR DAYS

YES NO

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

Created On: 01 Apr 2022, 12:07 PM Central Standard Time

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print)

31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

STANDARD FORM 1442 (REV. 8/2014) BACK

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

Section A - Solicitation/Contract Form

FY22 F6247 F5G855 AF9 934CE - QJKL 18-0024, FY22 B807 COMUNITY CENTER REPAIR

Purchase Requisition Number: F5G8551348AW01 Date: 11 Jan 2022 Proposal Identifier: FA663322R0001 Date: 01 Apr 2022

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Qty Unit Unit Price

Amount

Base Bid: Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to and /or titled: "Repair Community Center, Building 807, QJKL 18-0024" at the Minneapolis Air Reserve Station, Minneapolis Minnesota.

Firm Fixed Price

CIN: 00000000000006618141

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

1 Lot

Option Line Item

Bid Option 01: Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to Bid Option 01: to replace all air-handling units in lieu of replacement of air-handling unit evaporator coils, condensing units and line sets included in base bid.

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

Option Line Item

Bid Option 02: Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to Bid Option 02: Replace all shingled/sloped roofs in lieu of replacement of only low-sloped roofs included in base bid.

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

Option Line Item

Bid Option 03 : Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to Bid Option 03: Provide new humidifiers and associated piping as a bid option. (Note: this would be a deduction if

CLIN 0002 would be selected.)

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

Option Line Item

Bid Option 04 : Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to Bid Option 04: Replace all piping and plumbing fixtures in lieu of repairing only damaged piping and plumbing fixtures on the east side of the building included in base bid.

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

Option Line Item

Bid Option 05 : Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to Bid Option 05: Provide lighting control panels a shown on the drawings in lieu of manual diming controls for the north and south dining areas, kitchens, and offices in lieu of lighting control panels for these areas included in the base bid.

Product Service Code: Z2JZ Pricing Arrangement: Firm Fixed Price

Section C - Description/Specifications/Statement of Work

Requirements Contractor shall provide all professional services, permits, supervision, labor, materials and equipment necessary to fully meet all requirements of this Statement of Work, Construction Specifications, Construction Drawings and all other Contract Documents related to and/or titled: -Repair Community Center, Building 807, QJKL 18-0024- at the Minneapolis Air Reserve Station (MSP-ARS), Minnesota.

Notice to Offerors: Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any cost.

Set-Aside - 100% Total Small Business

Applicable North American Industry Classification System is 2362200Size Standard $39.5M.

All offerers must be registered in the System for Award Management (SAM) in order to receive an award.

Contractors can register via the internet at www.sam.gov

Bid Guarantee is required in accordance with FAR 52.228-1

Proposal Must be Valid until 30 September 2022

Section D - Packaging and Marking

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.246-12 Inspection of Construction. Aug 1996

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey

Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: The Contractor shall submit AF 3065. This report shall be signed by the Contractor's on-site representative in the Remarks section of the AF 3065. The work elements and percentages of the total job identified on the AF 3065 shall be identical to the work elements and percentages on the AF 3064. The Contractor submit the AF 3065 to Contracting to obtain either the COR or the Government contract inspector's acceptance by signature of the actual reported progress prior.

Additionally, the Contractor shall submit an updated AF 3064 as an attachment to each submission of the AF 3065.

DoDAAC: FA6633 CountryCode: USA

FA6633 934 AW PK

CP 612 713 1430

760 MILITARY HWY BLDG 729

MINNEAPOLIS, MN 55450-2100

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Section F - Deliveries or Performance

Overall Contract Delivery Period

From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

From date of lead time event to completion of performance 480 Calendar Days Date of Notice to Proceed Receipt

Line Item Delivery Schedule QTY Address and POC

Delivery Schedule From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

1 Lot Place of Performance DoDAAC: F5G855 CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Delivery Schedule From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

Place of Performance DoDAAC: F5G855 CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Delivery Schedule From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

Place of Performance DoDAAC: F5G855 CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Delivery Schedule From date of lead time event to beginning of performance

Place of Performance DoDAAC: F5G855

Option Line Item

10 Calendar Days Date of Notice to Proceed Receipt

CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Delivery Schedule From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

Place of Performance DoDAAC: F5G855 CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

Option Line Item

Delivery Schedule From date of lead time event to beginning of performance 10 Calendar Days Date of Notice to Proceed Receipt

Place of Performance DoDAAC: F5G855 CountryCode: USA

934 CE

AF BPN NO MILSBILLS PROCESSES

760 MILITARY HWY BLDG 744

MINNEAPOLIS, MN 55450

UNITED STATES

Michael Bushey Email: michael.bushey.4@us.af.mil Telephone: 612-713-1986

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.211-18 Variation in Estimated Quantity. Apr 1984

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.201-7000 Contracting Officer's Representative. Dec 1991 252.204-7006 Billing Instructions. Oct 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.236-7000 Modification Proposals--Price Breakdown. Dec 1991

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. Dec 2018

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

N/A

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

CONSTRUCTION PAYMENT INVOICE

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) [Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F87700 Issue By DoDAAC FA6633 Admin DoDAAC F5G3LC Inspect By DoDAAC F5G855 Ship To Code ____ Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) F5G3LC Service Acceptor (DoDAAC) F5G3LC Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Chin Dahlquist at 612-713-1426 or Jayme Mortensen at 612-713-1431

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

1. REQUIRED INSURANCE (IAW FAR 28.306(b)) 52.228-5 Insurance--Work on a Government Installation.

Reference FAR Clause 52.228-5, entitled "Insurance--Work on a Government Installation" the Contractor shall, at its own expense, procure and thereafter maintain the following kinds of insurance with respect to performance under the contract.:

A. Workmen's Compensation and Employer's Liability Insurance: Contractors are required to comply with applicable Federal and State workers' compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer's liability section of the insurance policy, except when contract operations are so commingled with a contractor's commercial operations that it would not be practical to require this coverage. Employer's liability coverage of at least $100,000 shall be required, except in States with exclusive or monopolistic funds that do not permit workers' compensation to be written by private carriers.

B. General Liability: Bodily injury liability insurance, in the minimum limits of $500,000 per occurrence shall be required on the comprehensive form of policy; only applicable to construction services where work is being performed consistently on base.

C. Automobile Liability Insurance: This insurance shall be required on the comprehensive form of policy and shall provide bodily injury liability and property damage liability covering the operation of all automobiles used in connection with the performance of the contract. At least the minimum limits of $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage shall be required. The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary claims.

2. INSURANCE COMPLIANCE CERTIFICATE

The contractor agrees to execute an insurance certificate with the Contracting Officer in accordance with Section H, paragraph 1, Required Insurance. This certificate shall be executed on the form entitled "Certificate of Compliance with Insurance Requirements" (Section I). The contractor shall comply with the requirements of FAR 28.302 - Notice of Cancellation or Change.

3. PERFORMANCE EVALUATIONS

a. At the conclusion of this contract, the Contracting Officer will complete a contractor's performance evaluation on the contract. The evaluation will take into account all aspects of the contractor's performance. Contractors will be provided a copy of the performance evaluation and an opportunity to discuss the performance evaluation.

The performance evaluations may have an impact on the award of future contracts. After considering input from the contractor, the Contracting Officer makes the final determination on ratings for all performance evaluations.

4. BONDS

40 U.S. Chapter 31, subchapter III, Bonds (formerly known as the Miller Act), requires performance and payment bonds for any construction contract exceeding $150,000.

A. Performance bonds: Unless the contracting officer determines that a lesser amount is adequate for the protection of the Government, the penal amount of performance bonds must equal-

(a) 100 percent of the original contract price; and

(b) If the contract price increases, an additional amount equal to 100 percent of the increase

B. .Payment bonds: Contractor must provide a payment bond that shall equal-

(a) 100 percent of the original contract price; and

(b) If the contract price increases, an additional amount equal to 100 percent of the increase.

(ii) The amount of the payment bond must be no less than the amount of the performance bond.

5. RIGHTS AND OBLIGATIONS:

The rights and obligations of the parties to this contract shall be subject to and governed by the provisions of this contract, To the extent of any inconsistency between this contract, the provisions of this contract shall control.

6. PROVISIONS ON CONTRACTING OFFICER'S AUTHORITY:

No person other than a Contracting Officer shall have authority to modify the terms and conditions of this contract. The Contracting Officer is the only person authorized to approve changes in any of the requirements under this agreement and notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely with the Contracting Officer. In the event the Contractor effects any such change at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment

7. DESIGNATION OF TECHNICAL REPRESENTATIVE:

The Base Civil Engineer or their authorized technical representative of the Contracting Officer shall be identified for the purpose of technical surveillance for the contract. This clause in no way authorizes anyone other than the Contracting Officer to direct changes in terms and conditions of the contract/task orders.

8. AVOIDANCE OF ORGANIZATIONAL CONFLICTS OF INTEREST

Any contractor, subcontractor associated, affiliated or a consultant to the design contractor who furnished the design information and/or specifications for a specifications for a specific project shall not be allowed to furnish such services or items as required by the construction contract for that project either as a prime contractor, subcontractor, or supplier.

9. REPLACEMENT OF KEY PERSONNEL

The contractor shall employ the key professional personnel and maintain the subcontractors and/or consultants identified in their SF 1413 submission to perform the services required under this contract. No substitution will be made without the advance written approval of the Contracting Officer, after the Government's review of the proposed replacement's experience and qualifications submitted by the contractor with explanation of the necessity for the change. No increase in discipline rates will be allowed when contractor personnel and/or subcontractor/consultant substitution is authorized.

10. PREPARATION OF SCHEDULE OF MATERIAL SUBMITTALS (AF66 Excel version)

The A&E contractor shall be responsible for the completion of the AF 66 Excel Form for the submittals contemplated by clause herein titled "FAR 52.236-5, Material and Workmanship" to be submitted utilizing AF

Form 3000, "Material Approval Submittal".

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.202-1 Definitions. Jun 2020 52.203-3 Gratuities. Apr 1984 52.203-5 Covenant Against Contingent Fees. May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. May 2014 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights.

Jun 2020

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. May 2011 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. Jun 2020 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.204-21 Basic Safeguarding of Covered Contractor Information Systems. Nov 2021

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

Nov 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment.

Nov 2021

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters. Oct 2018 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.211-13 Time Extensions. Sep 2000 52.215-2 Alternate III Audit and Records-Negotiation. - (Alternate III) Jun 2020 52.215-2 Audit and Records-Negotiation. Jun 2020 52.215-8 Order of Precedence-Uniform Contract Format. Oct 1997 52.215-10 Price Reduction for Defective Certified Cost or Pricing Data. Aug 2011 52.215-12 Subcontractor Certified Cost or Pricing Data. Jun 2020 52.215-15 Pension Adjustments and Asset Reversions. Oct 2010

52.215-18 Reversion or Adjustment of Plans for Postretirement Benefits (PRB) Other Than Pensions.

Jul 2005

52.215-19 Notification of Ownership Changes. Oct 1997

52.215-21 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data-Modifications.

Nov 2021

52.219-8 Utilization of Small Business Concerns. Oct 2018 52.222-1 Notice to the Government of Labor Disputes. Feb 1997 52.222-3 Convict Labor. Jun 2003 52.222-4 Contract Work Hours and Safety Standards -Overtime Compensation. May 2018 52.222-6 Construction Wage Rate Requirements. Aug 2018 52.222-7 Withholding of Funds. May 2014 52.222-8 Payrolls and Basic Records. Jul 2021 52.222-9 Apprentices and Trainees. Jul 2005 52.222-10 Compliance with Copeland Act Requirements. Feb 1988 52.222-11 Subcontracts (Labor Standards). May 2014 52.222-12 Contract Termination-Debarment. May 2014 52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations. May 2014 52.222-14 Disputes Concerning Labor Standards. Feb 1988 52.222-15 Certification of Eligibility. May 2014 52.222-21 Prohibition of Segregated Facilities. Apr 2015 52.222-26 Equal Opportunity. Sep 2016 52.222-27 Affirmative Action Compliance Requirements for Construction. Apr 2015

52.222-30 Construction Wage Rate Requirements-Price Adjustment (None or Separately Specified Method).

Aug 2018

52.222-34 Project Labor Agreement. May 2010 52.222-34 Alternate I Project Labor Agreement. - (Alternate I) May 2010 52.222-35 Equal Opportunity for Veterans. Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities. Jun 2020 52.222-37 Employment Reports on Veterans. Jun 2020 52.222-50 Combating Trafficking in Persons. Nov 2021 52.222-54 Employment Eligibility Verification. Nov 2021 52.222-55 Minimum Wages Under Executive Order 13658. Nov 2020 52.222-62 Paid Sick Leave Under Executive Order 13706. Jan 2017

52.223-5 Pollution Prevention and Right-to-Know Information. May 2011 52.223-6 Drug-Free Workplace. May 2001

52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners.

Jun 2016

52.223-15 Energy Efficiency in Energy-Consuming Products. May 2020

52.223-17 Affirmative Procurement of EPA-designated Items in Service and Construction Contracts.

Aug 2018

52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving. Jun 2020 52.223-19 Compliance with Environmental Management Systems. May 2011 52.223-20 Aerosols. Jun 2016 52.223-21 Foams. Jun 2016 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-1 Utilization of Indian Organizations and Indian-Owned Economic Enterprises. Jun 2000 52.227-1 Authorization and Consent. Jun 2020 52.228-2 Additional Bond Security. Oct 1997 52.228-5 Insurance-Work on a Government Installation. Jan 1997 52.228-11 Individual Surety-Pledge of Assets. Feb 2021 52.228-12 Prospective Subcontractor Requests for Bonds. May 2014 52.228-14 Irrevocable Letter of Credit. Nov 2014 52.229-3 Federal, State, and Local Taxes. Feb 2013 52.229-12 Tax on Certain Foreign Procurements. Feb 2021 52.232-17 Interest. May 2014 52.232-18 Availability of Funds. Apr 1984 52.232-23 Assignment of Claims. May 2014 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Nov 2021 52.233-1 Disputes. May 2014 52.233-1 Alternate I Disputes. - (Alternate I) May 2014 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.236-2 Differing Site Conditions. Apr 1984 52.236-3 Site Investigation and Conditions Affecting the Work. Apr 1984 52.236-5 Material and Workmanship. Apr 1984 52.236-6 Superintendence by the Contractor. Apr 1984 52.236-7 Permits and Responsibilities. Nov 1991 52.236-8 Other Contracts. Apr 1984

52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements.

Apr 1984

52.236-10 Operations and Storage Areas. Apr 1984 52.236-11 Use and Possession Prior to Completion. Apr 1984 52.236-12 Cleaning Up. Apr 1984 52.236-13 Accident Prevention. Nov 1991 52.236-14 Availability and Use of Utility Services. Apr 1984 52.236-15 Schedules for Construction Contracts. Apr 1984 52.236-17 Layout of Work. Apr 1984 52.236-21 Specifications and Drawings for Construction. Feb 1997 52.236-21 Alternate I Specifications and Drawings for Construction. - (Alternate I) Feb 1997 52.242-13 Bankruptcy. Jul 1995 52.242-14 Suspension of Work. Apr 1984 52.243-4 Changes. Jun 2007 52.243-5 Changes and Changed Conditions. Apr 1984 52.244-5 Competition in Subcontracting. Dec 1996 52.244-6 Subcontracts for Commercial Products and Commercial Services. Nov 2021 52.246-26 Reporting Nonconforming Items. Nov 2021 52.249-2 Termination for Convenience of the Government (Fixed-Price). Apr 2012 52.249-2 Alternate I Termination for Convenience of the Government (Fixed-Price). - (Alternate I) Apr 2012 52.249-10 Default (Fixed-Price Construction). Apr 1984 52.249-10 Alternate II Default (Fixed-Price Construction). - (Alternate II) Apr 1984 52.253-1 Computer Generated Forms. Jan 1991

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011

252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-Related Felonies.

Dec 2008

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Sep 2013 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7004 Antiterrorism Awareness Training for Contractors. Feb 2019

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. Dec 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. May 2016

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2021

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2020 252.205-7000 Provision of Information to Cooperative Agreement Holders. Dec 1991

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.215-7002 Cost Estimating System Requirements. Dec 2012 252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements. Dec 2010 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. Sep 2014 252.223-7008 Prohibition of Hexavalent Chromium. Jun 2013 252.225-7001 Buy American and Balance of Payments Program. Dec 2017 252.225-7002 Qualifying Country Sources as Subcontractors. Dec 2017 252.225-7048 Export-Controlled Items. Jun 2013

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

Apr 2019

252.232-7004 DoD Progress Payment Rates. Oct 2014 252.232-7010 Levies on Contract Payments. Dec 2006

252.232-7017 Accelerating Payments to Small Business Subcontractors-Prohibition on Fees and Consideration.

Apr 2020

252.236-7005 Airfield Safety Precautions. Dec 1991 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jun 2013 252.242-7006 Accounting System Administration. Feb 2012 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2012 252.244-7000 Subcontracts for Commercial Items. Oct 2020 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for Military Operations. Oct 2010

FAR Clauses Incorporated by Full Text

52.211-10 Commencement, Prosecution, and Completion of Work. Apr 1984

As prescribed in 11.404(b), insert the following clause in solicitations and contracts when a fixed-price construction contract is contemplated. The clause may be changed to accommodate the issuance of orders under indefinite-delivery contracts for construction.

Commencement, Prosecution, and Completion of Work (Apr 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 480 days.

(End of clause)

52.211-12 Liquidated Damages-Construction. Sep 2000

As prescribed in 11.503(b), insert the following clause in solicitations and contracts:

Liquidated Damages-Construction (Sept 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of $393.90 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

(End of clause)

52.219-14 Limitations on Subcontracting. Sep 2021

As prescribed in 19.507(e), insert the following clause:

Limitations on Subcontracting (Sep 2021)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) Definition. Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that-

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) Applicability. This clause applies only to-

(1)Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2)Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(3)Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;

(4)Orders expected to exceed the simplified acquisition threshold and that are-

(i)Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii)Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);

(5)Orders, regardless of dollar value, that are-

(i)Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F);

or

(ii)Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and

(6)Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) Limitations on subcontracting. By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for-

(1)Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;

(2)Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3)General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or

(4)Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause-

[X] By the end of the base term of the contract and then by the end of each subsequent option period; or

[ ] By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.

(g)A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.

52.219-28 Post-Award Small Business Program Rerepresentation. Sep 2021

As prescribed in , insert the following clause:19.309(c)(1)

POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (SEP 2021)

. As used in this clause-(a) Definitions means a contract of more than five years in duration, including options. However, the term does not include contracts that Long-term contract exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

-Small business concern

Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is (1) bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (d) of this clause. Such a concern is "not dominant in its field of operation" when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the (2) Affiliates others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the (b) Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, upon occurrence of any of the following:

Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the (1) novation agreement was executed prior to inclusion of this clause in the contract.

Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to (2) include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

For long-term contracts-(3)

Within 60 to 120 days prior to the end of the fifth year of the contract; and(i)

Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.(ii)

If the Contractor represented that it was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the (c) Contractor shall rerepresent its size and socioeconomic status according to paragraph (f) of this clause or, if applicable, paragraph (h) of this clause, when the Contracting Officer explicitly requires it for an order issued under a multiple-award contract.

The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that (d) corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a (e) contract other than a construction or service contract, is 500 employees if the acquisition-

Was set aside for small business and has a value above the simplified acquisition threshold;(1)

Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; (2) or

Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business (3) set-aside or sole-source award regardless of dollar value.

Except as provided in paragraph (h) of this clause, the Contractor shall make the representation(s) required by paragraph (b) and (c) of this (f) clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause, or with its offer for an order (see paragraph (c) of this clause), that the data have been validated or updated, and provide the date of the validation or update.

If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not (g) required to, take the actions required by paragraphs (f) or (h) of this clause.

If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code (h) applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office,…