Attachment_J.8_-_NBTS_-_Quantity_Estimates.pdf

ETHIOPIAN HEALTH INFRASTRUCTURE PROJECT NATIONAL BLOOD TRANFUSION SERVICE

September 21, 2015

BIRR USD

I. BILL 1 - BUILDING

A. SUB STRUCTURE

1.0 Excavation and Earth Works

2.0 Concrete Works

B SUPER STRUCTURE

1.0 Concrete Works

2.0 Walling

3.0 Roofing

4.0 Steel Structure

5.0 Carpentry and Joinery

6.0 Metal Works

7.0 Finishing

8.0 Glazing

9.0 Painting

10.0 Specialities

C. TECHNICAL INSTALLATIONS

1.0 Plumbing Works

2.0 Mechanical Works

3.0 Fire Suppression

4.0 Electrical Works

D. INCINERATOR AND SHED

E. GUARD HOUSE

SUB TOTAL - I…………

II. BILL 2 - SITE WORKS

A. RETAINING WALLS

B. DRAINAGE STRUCTURES

C. VEHICULAR AND PEDESTRIAN ACCESS

D SITE TECHNICAL INSTALLATION

1.0 Plumbing

2.0 Electrical

3.0 Mechanical

E. GREEN AREAS

F. FENCE

G. DEMOLISHING

H. RE-LOCATION AND RE -CONSTRUCTION

SUB TOTAL - II .………

TOTAL ( I+II )……….

CONTINGENCY (10%)……….

TOTAL WITH CONTINGENCY

GRAND TOTAL……….

SUMMARY

FOR

FMOH - NATIONAL BLOOD TRANSFUSION SERVICE

Note:

The quantities shown are estimates based on the Consultants review of the plans. The contractor shall be responsible for verifying the quantities. If a discrepancy between the plan and the Bill of Quantities exists the Contractor shall assume the plans to be correct.

SUMMARY OF BILL OF QUANTITIES

FMOH - NBTS

BILL1- BUILDING

BIRR USD

A. SUB STRUCTURE

1.0 EXCAVATION AND EARTH WORKS -- [Division 31]

2.0 CONCRETE WORKS -- [Division 03]

TOTAL A ……….

A. SUBSTRUCTURE

1.0 EXCAVATION & EARTHWORKS

1.1 Clear off site to remove top soil to an

average depth of 20cm.

311000 M² 1,472.10

1.2 Bulk excavation of ordinary soil including lift

foundation and thickening to reduce level from the natural ground level to a depth not exceeding 150cm.

312000 M³ 2,208.15

1.3 Bulk excavation of ordinary soil including lift

foundation and thickening to reduce level from the natural ground level to a depth exceeding 150cm up to 300cm.

312000 M³ 2,208.15

1.4 Bulk excavation of weathered rock including lift foundation and thickening to reduce level from the natural ground level to a depth exceeding 300cm up to 450cm.

312000 M³ 1,987.34

1.5 Bulk excavation of hard rock to reduce level

from the natural ground level to a depth not exceeding 150cm.

312000 M³ -

1.6 Bulk excavation of hard rock to reduce level from the natural ground level to a depth to a depth exceeding 450cm up to 600cm.

312000 M³ 203.40

1.7 Backfill with borrowed selected material (as per the Engineer's order) filled in layers thickness not exceeding 20cm and well compacted with 10T roller with minimum number of passes 8 to a compaction grade of 95% of its proctor test .

312000 M³ 2,193.13

1.8 30cm thick Gravel pack under mat foundation from approved source and well rolled every 10cm interval.

312000 M³ 480.00

1.9 Remove surplus excavated material away

from the site as per the instruction of the Engineer to a appropriate location.

312000 M³ 6,607.04

1.10 Apply Shoring works around the three sides of the building as per the Engineer instruction.

312000 LS 1.00

1.11 Apply Geo-synthetic filter under the basement slab from approved source as per the drawing and Specification. Price shall include all the necessary incidental works to complete the work

22700 M² 1,600.00

Total carried to summary

ITEM

UNIT

QTY

RATE

[ETB]

Amount

[ETB]

SPEC.

REFERENCE

DESCRIPTION

ITEM

UNIT

QTY

RATE

[ETB]

Amount

[ETB]

SPEC.

REFERENCE

DESCRIPTION

2.0 CONCRETE WORKS

Particular attention must be given to the following notes along with the Technical Specification and Method of Measurement.

Constituents of concrete:

The quality of ingredients of concrete must fulfill the requirements, concrete trial mixes shall be done and certified by laboratory test results before casting of structural elements.

During concrete casting samples should be taken for laboratory tests.

Concrete : 033000 The specified concrete strength must be confirmed by laboratory test.

2.1 5cm thick lean concrete in C-5, as per the specification.

a) Mat Foundation M² 1,402.00

2.2 Reinforced concrete in C-30, as per the specification filled into formworks and vibrated around rod reinforcement. Price shall includes water stops and incidental works.

Steel and formworks measured separately.

033000

a) cyclopean Mat Foundation with 1.6 clear height of lift foundation and thickening.

M³ 906.26

b) Lift elevation M³ 6.27

c) Sides and soffit of stair case and landing. M³ 4.20

d) Basement Floors elevation columns. M³ 6.04

e) Ground Grade beams. M³ 84.16

f) 17cm Suspended Ground floor slab M² 1,123.92

g) Retaining Concrete Wall M³ 115.74

h) Gravity Wall M³ 70.63

i) shear Wall M³ 95.35

j) Parapet shear Wall M³ 46.81

2.3 Provide, smooth formworks as per the

specification.

033000

a) cyclopean Mat Foundation with 1.6 clear height of lift foundation and thickening.

M² 136.91

b) Lift elevation M² 62.68

c) Sides and soffits of stair case and landing. M² 64.17

d) Basement Floors elevation columns. M² 60.37

e) Ground Grade beams. M² 452.37

f) 17cm Suspended Ground floor slab M² 1,123.92

g) Retaining Concrete Wall M² 578.68

h) Gravity Wall M² 470.84

i) shear Wall M² 668.27

j) Parapet Wall M² 468.07

ITEM

UNIT

QTY

RATE

[ETB]

Amount

[ETB]

SPEC.

REFERENCE

DESCRIPTION

Reinforcement bar :

The specified yield strength and other related properties of reinforcement bar must be certified either by manufacturer's catalogue/manual or/and by laboratory test.

2.4 Steel reinforcement according to drawing.

Price includes cutting, bending, placing in position and tying wires.

033000

a) Dia. 8mm kg 9,049.00

b) Dia. 10mm kg 6,546.00

b) Dia. 12mm kg 8,831.00

c) Dia. 14mm kg 41,811.00

d) Dia. 16mm kg 14,906.00

e) Dia. 20mm kg 22,881.00

f) Dia. 24mm kg 6,896.00

Total carried to summary

SUMMARY OF BILL OF QUANTITIES BIRR USD

FMOH - NBTS

B. SUPER STRUCTURE

1.0 CONCRETE WORKS -- [Division 03]

2.0 WALLING -- [Division 04]

3.0 ROOFING -- [Division 07]

4.0 STEEL STRUCTURE [Division 05]

5.0 CARPENTRY AND JOINERY -- [Division 06 ]

6.0 METAL WORKS -- [Division 05 ]

7.0 FINISHING -- [Division 09]

8.0 GLAZING -- [Division 08]

9.0 PAINTING -- [Division 09]

10.0 Specialties -- [Division 10]

TOTAL B ……….

B. SUPERSTRUCTURE

1.0 CONCRETE WORKS

1.1 Reinforced concrete in class C-30 (with a 28-day

15cm cube crushing strength of 30MPa), cast into formworks and vibrated around rod reinforcement bars.( formwork & reinforcement bars are measured separately.) in: "Type of cement to be ordinary Portland cement (OPC)"

033000

a) Elevation column. M³ 49.94

b) Sides and soffits of stair case and landing. M³ 22.99

c) Intermediate beams . M³ 167.83

d) 170 mm thick concrete slab M² 2,273.22

e) 170 mm thick Top roof slab M² 95.59

f) Top tied beam M³ 46.37

g) Concrete Gutter M³ 7.60

h) Lift Elevation M³ 32.11

I) shear Wall M³ 252.53

j) Concrete Ramp M³ 31.00

j) Parapet concrete M³ 9.18

1.2 Provide, smooth formworks as per the specification

to:-

033000

a) Elevation column. M² 519.57

b) Sides and soffits of stair case and landing. M² 185.45

c) Intermediate beams . M² 902.10

d) 170 mm thick concrete slab M² 2,284.29

e) 170 mm thick Top roof slab M² 106.66

f) Top tied beam M² 387.89

g) Concrete Gutter M² 101.35

h) Lift Elevation M² 321.15

I) shear Wall M² 1,701.78

j) Concrete Ramp M² 258.40

1.3 Steel reinforcement according to drawing. Price

includes cutting, bending, placing in position and tying wires.

33000

a) Dia. 8mm kg 17,859.00

b) Dia. 10mm kg 7,374.00

c) Dia. 12mm kg 5,208.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

d) Dia. 14mm kg 19,562.00

e) Dia. 16mm kg 34,401.00

f) Dia. 20mm kg 1,030.00

g) Dia. 24mm kg -

Total Carried to Summary

2.0 WALLING

External and Partition Walls

2.1 Provide 20cm thick Class-B HCB wall in

accordance with the drawings and Specification.

Price includes all necessary materials and incidental works required to complete the work.

042200

a. In basement floor M² -

b. In ground floor M² 138.50

c. In first floor M² 100.18

d. In second floor M² 100.18

e. In third floor M² 111.99

f. In Lift house and roof access M² 156.22

2.2 Provide 15cm thick Class-B HCB wall in

accordance with the drawings and Specification.

Price includes all necessary materials and incidental works required to complete the work.

042200

a. In basement floor M² 300.73

b. In ground floor M² 207.96

c. In first floor M² 518.47

d. In second floor M² 301.40

e. In third floor M² 36.43

2.3 Provide 10cm thick Class-B HCB wall in

accordance with the drawings and Specification.

Price includes all necessary materials and incidental works required to complete the work.

042200

a. In basement floor M² -

b. In ground floor M² 76.93

c. In first floor M² 68.93

d. In second floor M² 68.93

e. In third floor M² 31.08

2.4 Brick Wall

Provide double brick wall to fire escape stair and ground floor planter box in accordance with the drawings and Specification. Price includes all necessary materials and incidental works required to complete the work.

042113

a. In basement floor M² 7.52

b. In ground floor M² 71.67

c. In first floor M² 34.38

d. In second floor M² 34.54

e. In third floor M² 34.54

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

f. In ground floor wall, Lift house and roof access

M² 22.78

2.5 Provide single brick wall brick wall to fire escape

stair , planter box and basement water proof membrane protection in accordance with the drawings and Specification. Price includes all necessary materials and labor required to complete the work.

042113 M² 709.60

2.6 Gypsum board Partition wall

Supply and fix gypsum partition wall by cladding on both sides with framing; gypsum board of size 1200*2440*12mm as per the detail drawing.

Price shall include, cladding of both side gypsum board, framing stud internal batten, screw, approved type beads at joint finishing and all accessories for the completion of the work.

Painting shall be measured separately.

092900

a. In ground floor M² 326.20

b. In first floor M² 112.86

c. In second floor M² 267.99

d. In third floor M² 599.44

2.7 High pressure Laminated board

Supply and fix HPL(High pressure laminated board) as shown on the detail drawing and Specification. Price shall include doors and all the necessary incidential works to complete the work.

062000 M² 76.90

Aluminum Glass wall

2.8 Supply and fix approved type pre-coated

aluminum frame ,paneled aluminum and glass walls complete with all necessary accessories and sealing gaskets as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories to complete the work.

The color and type of lock shall be approved by Architect.

085113 M² 81.37

Total Carried to Summary

3.0 ROOFING

Roof Cover

3.1 Supply and fix 0.6mm thick pre coated EGA 400

sheet roof covering to RHS purlins as per the drawings and the Specification. Price shall include all the necessary accessories. The color shall be approved by the Architect.

074110 M² 835.60

Valley Gutter

3.2 Supply and fix valley gutter made from

galvanized sheet metal properly fixed to purlins price shall include all the necessary accessories for fixing(Gage 28 with development length for fixing 1500mm).

076200 LM 22.97

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

Flashing to Concrete Gutter

3.3 Supply and fix 0.6mm thick pre-coated flat sheet

metal flashing with development length properly fixed to concrete gutter per the drawing and Specification. Price shall include the cement screed bedding to provide proper slope and all the necessary accessories for fixing.

076200 LM 69.78

Total Carried to Summary

4.0 STEEL STRUCTURE

Supply & fix steel truss structure as per the structural drawings and Specification. Price shall include one coat of antirust and two coats of synthetic enamel painting, all connections, bolts, plates in accordance with Specification and all other necessary accessories and incidental works to complete the work.

055500* 099100**

4.1 a) SHS:60x60x3mm Kg 3,906.77 b)SHS: 40x40x3mm Kg 3,939.60

4.2

Supply and fix RHS Lattice Purlins

a) RHS: 80x40x3mm kg 11,346.29 4.3

Supply and fix fire escape metal spiral stair case as per the drawing and specification. Price shall include the railing, prime coats of anti rust, two coats of approved type painting, welding, bolting, placing and all the necessary accessories to complete the work.

055500 Ls 1.00

4.4 Supply and fix pit ladder as per the drawing and specification. Price shall include the railing, prime coats of anti rust, two coats of approved type painting, welding, bolting, placing and all the necessary accessories to complete the work.

055500 Ls 1.00

4.5 Supply and fix roof top access ladder as per the drawing and specification. Price shall include the railing, prime coats of anti rust, two coats of approved type painting, welding, bolting, placing and all the necessary accessories to complete the work.

055500 Ls 1.00

Bollard walls at car parking 4.6

Supply and fix crash resistant wall mounted steel safety bollard as per the drawing and specification. Price shall include all the necessary accessories to complete the work.

055500 Ls 1.00

Total Carried to Summary

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

5.0 CARPENTRY & JOINERY

I. Carpentry Ceiling work

5.1 Supply and fix Size: 600*600*10mm thick

gypsum tile suspended ceilings as per the drawings, Specification and manufacturers instruction. Price shall include approved metal suspension and with all accessories to complete the work. The pattern & texture shall be approved by the Architect.

092900

a. In ground floor M² 790.12

b. In first floor M² 853.66

c. In second floor M² 836.36

d. In third floor M² 865.00

5.2 Supply and fix thick laminated PVC ceiling on

40x50 mm Austrian wooden ceiling batten placed at 600 mm c/c in both sides as per the drawing and Specification. Price shall include ceiling batten, corner list detail and all accessories for the completion of the work. The color should be approved by the Architect.

095100

a. In ground floor M² 32.16 II. Joinery Wooden Doors

5.3 Supply and fix wooden doors made of semi-solid

honey comb core with 50*50mm grid spacing and 6mm thick high pressure laminated fiber board (HDF). The door frames shall be made of Austrian wood or equivalent quality as per detail drawing, edges covered with mistral and the cylindrical lock is ASSA or equivalent with hinges and necessary iron monogyny, use Austria solid door framing. All are per the drawings and Specification. Price shall include three coats of varnish paint, approved quality cylindrical lock, hinges & door stopper.

062000 Pcs

a. In Ground floor D 4 Size: 110*270cm Pcs 27.00 D8 Size: 90*210cm Pcs 2.00

b. In First floor D 1 Size: 180*270cm Pcs 4.00 D 4 Size: 110*270cm Pcs 11.00 D 7 Size: 110*270cm Pcs 7.00 D 8 Size: 90*210cm Pcs 2.00

D 13 Size: 110*270cm Pcs 1.00 C. In Second floor

D 1 Size: 180*270cm Pcs 1.00 D 2 Size: 180*270cm Pcs 2.00 D 4 Size: 110*270cm Pcs 15.00 D 7 Size: 110*270cm Pcs 6.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

D 8 Size: 90*210cm Pcs 2.00 D. In Third floor

D 2 Size: 180*210cm Pcs 2.00 D 4 Size: 110*270cm Pcs 21.00 D 7 Size: 110*270cm Pcs 1.00 D 8 Size: 90*210cm Pcs 2.00

E. In Shafts-(Basement floor -Attic roof) D Size 60*180cm Pcs 16.00 D Size 50*210cm Pcs 5.00

III. Cabinets and counters 5.4

Supply and fix stainless steel counter tops as per the drawings and specifications. Price shall include all accessories for the completion of the work.

1216 36 Set 7.00

5.5 Supply and fix wooden cabinets as per the

drawings and specifications. Price shall include all accessories and labor for the completion of the work.

112600

a. Kitchens Set 2.00 b.Registration room Set 1.00 5.6

Supply and fix counters top size: 600*1700mm as per the drawings and specifications. Price shall include all accessories and to completion of the work.

112600 Set 1.00

5.7 Supply and fix counters top size: 400*1700mm as per the drawings and specifications. Price shall include all accessories and to completion of the work.

112600 Set 1.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

6.0 METAL WORKS

I. Corner Protection

6.1

Perforated angle iron for corner protections fixed to the exposed corner edges of door openings, columns, walls, floors, etc., plastered over & painted. Size 25 x 25 x 1.5mm, with a length not exceeding 1500mm. All are as per the drawings and Specification. Price shall include all the necessary accessories and labor for fixing.

055500 Pcs 302

II. Baluster and Balustrade

6.2 Supply and fix baluster and balustrade made with

circular aluminum pipe to a stair case as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories to complete the work.

055500 LM 146.00

6.3 Supply and fix baluster and balustrade made with

circular aluminum pipe to a fire escape exit as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories to complete the work.

055500 LM 3.00

III. Metal doors

6.4 Supply and fix metal door with 0.8mm metal

sheet cladding in both sides on RHS mild steel frame and louvers fixed as per the drawing and specification for each type. The lock shall be a high quality (ASSA) or equivalent type which shall be approved by the architect before installation.

Price shall include prime coats of antirust, two coats of approved paint, locks, hinges and all the necessary accessories to complete the work.

055500 079200 081113 099100

a. Basement Floor D 5 Size: 100*210cm Pcs 2 D 9 Size: 110*210cm Pcs 1

D 10 Size: 180*210cm Pcs 2 D 11 Size: 110*210cm Pcs 2 D 15 Size: 110*210cm Pcs 3

b. Ground Floor D 5 Size: 100*210cm Pcs 4

c. First Floor D 5 Size: 100*210cm Pcs 2

d. Second Floor D 5 Size: 100*210cm Pcs 2

e. Third Floor D 5 Size: 100*210cm Pcs 2

e. Attic Floor D 11 Size: 110*210cm Pcs 1.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

6.5 Supply and fix metal door with grilled RHS of

Size 50*50*1.5mm as per the drawing and specification. The lock and color shall be approved by Architect. Price shall include prime coats of antirust, two coats of approved paint, locks, hinges and all the necessary works to complete the work.

055500 081113 099100

a. Basement Floor D 12 Size: 610*315cm Pcs 1 D 14 Size: 620*315cm Pcs 1 D 15 Size: 180*210cm Pcs 1 D 16 Size: 300*315cm Pcs 1

IV.Windows and Doors Alumunium profile

a. Doors

6.6 Supply and fix approved type pre-coated solid

aluminum alloy flush doors with 1.02 mm thick aluminum skin complete with all necessary accessories; wheel chair protection plate, pull handle and others mandatory for accessible room doors as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories to complete the work. The color and lock shall be approved by Architect.

084413 079200

Pcs

a. Ground floor D 6 Size: 110*210cm Pcs 2.00 b.First floor D 6 Size: 110*210cm Pcs 2.00 c.Second floor D 6 Size: 110*210cm Pcs 2.00 d.Third floor D 6 Size: 110*210cm Pcs 2.00

b. Windows

6.7 Supply and fix approved type pre-coated

aluminum frame windows complete with all necessary accessories and sealing gaskets as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories and labor to fix the work. The color shall be approved by Architect.

085113 079200

Pcs a.Ground floor W 1 Size: 160*160cm Pcs 22.00

W 2 Size: 80*80cm Pcs 8.00 b.First floor

W 1 Size: 160*160cm Pcs 23.00 W 2 Size: 80*80cm Pcs 8.00 c.Second floor W 1 Size: 160*160cm Pcs 22.00

W 2 Size: 80*80cm Pcs 8.00 W 3 Size: 160*160cm Pcs 1.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

d.Third floor W 1 Size: 160*160cm Pcs 26.00

W 2 Size: 80*80cm Pcs 8.00 C. Aluminum glass doors

6.8 Supply and fix approved type pre-coated

aluminum frame glass doors complete with all necessary accessories and sealing gaskets as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories and labor to fix the work. The color and lock shall be approved by Architect.

085113 079200

Pcs

a. Ground floor D 3 Size: 180*270cm Pcs 4.00 D 9 Size: 110*210cm Pcs 1.00

D. Louvered Aluminum glass doors

6.9 Supply and fix approved type pre-coated

aluminum frame glass doors with Louvers complete by type with all necessary accessories and sealing gaskets as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories and labor to fix the work. The color and lock shall be approved by Architect.

085113 079200

Pcs

a. Ground floor D 17 Size: 110*210cm Pcs 1.00 b.First floor D 17 Size: 110*210cm Pcs 1.00 c.Second floor D 17 Size: 110*210cm Pcs 1.00 d.Third floor D 13 Size: 110*270cm Pcs 1.00 D 17 Size: 110*210cm Pcs 1.00

E. Glazed Aluminum Curtain Wall

6.10 Supply and fix anodized aluminum curtain wall

frame with 8mm Spandrel glazing aluminum curtain wall , louver frame with glazing and door fixed on it complete with all necessary accessories and sealing gaskets as per the drawing, Specification and manufacturer's instruction. Price shall include all the necessary accessories and labor to fix the work. The color shall be approved by Architect.

084413 079200

Pcs

CW1-Size-210*1297cm Pcs 1.00

CW2-Size-610*1297cm Pcs 1.00

CW3-Size-450*1382cm Pcs 1.00

CW4-Size-450*1382cm Pcs 1.00

CW5-Size-510*1297cm Pcs 1.00

CW6-Size-610*1297cm Pcs 1.00

CW7-Size-748*1046cm Pcs 1.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

F. Louver window

6.11 Supply and fix Metal louver of 9blades for cross

ventilation as per the drawing and the specification, louvers are of sheet metal with 1.5mm thickness. Price shall include all the necessary works to complete the work.

089119 Pcs

W4-Size-80*160cm Pcs 2.00 W8-Size-80*80cm Pcs 1.00

6.12 Aluminum Louver windows of 5 blades right hand

double control which shall be produced in standard 142mm louver jamb sets in mill finish aluminum including handles from inside, complete with all necessary accessories & fixed to aluminum frames horizontally & vertically as shown on the drawing. Price shall include the cost of chamfering/dulling of edges of glass pieces fixed to blade holder, rubber band & fixing of louver frame.

089000 Pcs

Having 5 blades of louver window

a. W5-Size-80*160cm Pcs 2.00 Having 7 blades of louver window

a. W7-Size-40*40cm Pcs 1.00 6.13

Supply and fix Aluminum louver of 15blades as per the drawing and the specification, louvers blades are made of aluminum with the specified thickness. Price shall include all the necessary works to complete the work.

089000 089119

a. W3-Size-160*160cm Pcs 1.00 G. Fire rated glazed window

6.14 Supply and fix fire rated glazed window as per the drawing and technical specification:

085113

W1'-Size-160*160cm Pcs 6.00 H. Fire exit Doors

6.15 Supply & fix fire rated for 30min( FD 30s-self closing fire door) galvanized steel with powder coated door , having visibility glazing of size 300*300*5mm and aluminum-silicon wool inner filling material. The type shall be be approved by Architect. Price shall include all the necessary accessories for fixing in place and completing the work.

062000

D 5 Size: 100*210cm Pcs 11 I. Grill Partition Wall

6.16 Supply & fix metal grill wall as per the drawing

and specification at the basement. price shall includes all the necessary accessories to complete the work. 055500 M² 145.86

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

V. Aluminum panel Ceiling

6.17 Supply and fix aluminum panel ceiling as per the

drawing and Specification. Price shall include all the necessary accessories and incidental works to complete the work.

095100 M² 15.00

Total Carried to Summary

7.0 FINISHING

I. Plastering in Cement Mortar

Provide two coats of plastering in cement sand mortar as per the drawings and Specification Price shall include pre-cleaning and preparation of the surface.

092400

a. Internal Surfaces

7.1 To HCB wall surfaces:

a. Basement floor M² 616.51

b. Ground floor M² 851.62

c. First floor M² 1,343.74

d. Second floor M² 909.93

e. Third floor M² 316.09

f. Lift room and roof access M² 22.78

7.2 Provide two coats of plastering in cement sand

mortar to column, shear wall , stair soffit , core walls and gravity walls surfaces as per the drawings and Specification. Price shall include pre-cleaning and preparation of the surface.

092400

a. Basement floor M² 1,056.52

b. Ground floor M² 469.58

c. First floor M² 469.58

d. Second floor M² 469.58

e. Third floor M² 469.58

f. Lift room and roof access M² 20.80 Plastering to ceiling soffit

7.3 Provide three coats of plastering in cement sand

mortar as per the drawings and Specification Price shall include pre-cleaning and preparation of the surface.

092400

a. Basement floor M² 1,582.00

b. Ground floor M² 37.72

c. First floor M² -

d. Second floor M² -

e. Third floor M² 15.82 Plastering in Gypsum HCB, Brick and concrete surface

7.4 Provide final coat of gypsum plaster to internal

wall surface as per Specification.

092300

a. Basement floor M² -

b. Ground floor M² 1,167.34

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

c. First floor M² 1,675.46

d. Second floor M² 1,241.65

e. Third floor M² 723.52

f. Lift room and roof access M² 43.58 Plastering in ceiling soffit surface

7.5 Provide final coat of gypsum plaster to ceiling

surface as per Specification.

092300

a. Ground floor M² 37.72

b. First floor M² -

c. Second floor M² -

d. Third floor M² 15.82 Plastering in gypsum board wall surface

7.6 Provide final coat of gypsum plaster to internal

wall surface as per Specification.

092300

a. Ground floor M² 652.39

b. First floor M² 225.71

c. Second floor M² 535.99

d. Third floor M² 1,198.87

b. External Surfaces

7.7 Provide two coats of plastering in cement sand

mortar as per the drawings and Specification.

Price shall include pre-cleaning and preparation of the surface, to HCB wall surfaces:

092400

a. Ground floor M² 138.50

b. First floor M² 100.18

c. Second floor M² 100.18

d. Third floor M² 111.99

e. Lift room and roof access M² 179.00

7.8 Provide two coats of plastering in cement sand

mortar as per the drawings and Specification.

Price shall include pre-cleaning and preparation of the surface, to column, shear wall and stair soffit surfaces.

092400

a. Ground floor M² 131.51

b. First floor M² 129.98

c. Second floor M² 129.98

d. Third floor M² 129.98

e. Lift room and roof access M² 22.49 II. Floor Finishing

a. Cement Screed

7.9 Provide smooth finish cement sand screed floor

finish in mortar mix ratio. Cement slurry bond coat shall be scrubbed to prepare slab prior to placing mortar bed.

096519

48mm thick to receive PVC tile.

a. Basement floor M² -

b. Ground floor M² 192.15

c. First floor M² 133.68

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

d. Second floor M² 305.44

e. Third floor M² 756.36

b. PVC Finish PVC tile floor finishing

7.10 Provide PVC tile 300*300*2mm thick shall be laid

on properly finished and cured floor screed with approved type adhesive glue in accordance with the manufacturers instruction and color and type is approved by the Architect.

096519

a. Ground floor M² 192.15

b. First floor M² 133.68

c. Second floor M² 305.44

d. Third floor M² 654.40

7.11 Provide 7cm thick PVC skirting per the drawings, Specification and manufacturer's instructions. Price shall include appropriate floor preparation , approved adhesives and all labor and materials to complete the installation.

096519

a. Ground floor LM 188.72

b. First floor LM 122.26

c. Second floor LM 167.92

d. Third floor LM 416.07 C. Porcelain Tiles

7.12 Supply and fix 600*600*10mm thick Non-slippery roughly textured Matt finish Porcelain floor tiles. Price shall include cement sand mortar (1:3) ratio backing, grouting with matching color and other incidental works. The Sample should be approved by the Engineer/Architect.

093000

a. Ground floor M² 296.50

b. First floor M² 147.52

c. Second floor M² 156.62

d. Third floor M² 151.01

7.13 D. Wooden skirting Size: 2cm thick and 10cm high. Price shall include sealant, bolting and other incidental works. The Sample should be approved by the Engineer/Architect.

093000

a. Ground floor LM 175.36

b. First floor LM 135.84

c. Second floor LM 134.21

d. Third floor LM 91.74

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

E. Epoxy Coating 7.14

Supply and lay 3mm thick self leveling epoxy floor finish. Price shall include all other incidental works . The color should be approved by the Architect.

096723

a. Basement floor M² 100.21

b. Ground floor M² 181.91

c. First floor M² 494.96

d. Second floor M² 265.16

e. Third floor M² -

7.15 10cm high in two coat Epoxy resin coating skirting.

096723

LM

a. Basement floor LM 79.18

b. Ground floor LM 127.91

c. First floor LM 293.32

d. Second floor LM 168.10

e. Third floor LM - F. Ceramic Tiles

7.16 Supply and fix 300*300*8mm thick Non-slippery glazed ceramic floor tiles. Price shall include cement sand mortar (1:3) ratio backing, grouting with matching color and other incidental works.

The color and texture should be approved by the Architect.

093000

a. Ground floor M² 107.35

b. First floor M² 58.32

c. Second floor M² 113.58

d. Third floor M² 38.85

7.17 G. Ceramic skirting Size: 7cm in height Price shall

include cement sand mortar plaster (1:3) ratio, backing, grouting with matching color and other incidental works. The Sample should be approved by the Engineer/Architect..

093000

a. Ground floor LM 128.73

b. First floor LM 91.55

c. Second floor LM 131.30

d. Third floor LM 44.68 H. Marble floor finish

7.18 Supply and fix marble tiles of 20mm thickness.

Price shall include cement sand mortar (1:3) ratio backing, grouting with matching color and other incidental works. The color and texture should be approved by the Architect.

093000

a. Ground floor M² 18.29

b. First floor M² 7.08

c. Second floor M² 7.08

d. Third floor M² 7.08

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

7.19 I. Marble skirting Size: 7cm in height Price shall

include cement sand mortar plaster (1:3) ratio, backing, grouting with matching color and other incidental works. The Sample should be approved by the Engineer/Architect.

093000

a. Ground floor LM 25.11

b. First floor LM 12.44

c. Second floor LM 12.44

d. Third floor LM 12.44 J. Terrazzo floor finish

7.20

Supply and fix terrazzo tiles . Price shall include cement sand mortar (1:3) ratio backing, grouting and other incidental works. The texture should be approved by the Architect.

093000

a. Roof access M² 68.00

7.21 K. Terrazzo skirting Size: 7cm in height Price shall

include cement sand mortar plaster (1:3) ratio, backing, grouting with matching color and other incidental works. The Sample should be approved by the Engineer/Architect..

093000

a. Roof access LM 40.00

III. Wall Finishing Works A. Ceramic Tile Wall Finish

7.22 Supply and fix 200x300x6mm ceramic wall

cladding to internal vertical surface by using 2.5mm spacer and approved type adhesive .The joint should grouted with water tight material.

Price shall include preparation of the surface and all other related works. The sample of tile,adhisive and grouting material should be approved by the architects.

093000 M²

a. Ground floor M² 90.72

b. First floor M² 133.31

c. Second floor M² 133.31

d. Third floor M² 579.51

B. Windows Sill

7.23 Marble window sill, size 27*3cm edge chamfered, weathered & with water drip grooved & with a minimum slope of 2% away from the building.

Price shall include bedding of mortar 1:3 & all the necessary preparation & finishing works. The quality & color shall be approved by the Engineer/Architect.

097523 LM 189.60

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

C.Stairs and Steps Tread & Riser

7.24 Supply and fix weathered & treated marble to

steps, treads and risers as per the drawings and Specification. Price shall include all the necessary materials and labor to complete the work.

096519

a. 3cm thick marble tread one side curve chamfered

M² 82.50

b. 2cm thick marble riser M² 70.13

c. 3cm thick marble for landing M² 31.24

d. 2cm thick marble for thresholds with a width of 20cm. LM

251.98

e. 2cm thick marble for coping with a width of 20cm. LM

163.42

D.Skirting

7.25 Supply and Fix 1.2cm thick,10cm high and one

side curve chamfered marble skirting for stair case as per the drawings and Specification . Price shall include all the necessary materials and labor to complete the work.

096519

LM

54.00

E. Epoxy wall coating

7.26 Supply and construct epoxy wall finish as per

the manufactures instruction and Engineers approval. Price shall include all other incidental works. The color should be approved by the Architect.

096723 M² 152.06

F.External Wall Cladding 7.27

Supply and fix approved type Clinker tiles for external wall cladding. Price shall include cement sand mortar (1:3) ratio backing , grouting and other incidental works. The color and texture should be approved by the architect.

093000 M² 1,330.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

8.0 GLAZING

8.1 Supply and fix 6mm thick tinted glass mounted

between frames as per the drawings and Specification. Price shall include all the necessary accessories to complete the work.

088000 079200

M² 282.33

8.2 Supply and fix 8mm thick tinted glass mounted

between frames as per the drawings and Specification. Price shall include all the necessary accessories to complete the work.

088000 079200

M² 488.64

8.3 Supply and fix 5mm thick clear glass fan lights as

per the drawings and Specification . Price shall include all the necessary accessories to complete the work.

088000 079200

M² 4.61

8.4 Supply and fix fire rated wired glazing to stop

fire as per the drawings and Specification . Price shall include all the necessary accessories to complete the work.

088000 079200

M² 15.36

Total Carried to Summary

9.0 PAINTING

I. Plastic Emulsion Paint

9.1 Provide three coats of plastic emulsion paint to

internal plastered wall surface in accordance with the drawings and Specification.

099100 M² 9,137.54

9.2 Provide three coats of plastic emulsion paint to internal plastered ceiling soffit surface in accordance with the drawings and Specification.

099100 M² 25.21

II. Synthetic Paint

9.3 Apply 3 coats of approved type synthetic paint

to walls as per the drawings and Specification. 099100 M² 339.98

9.4 Apply 3 coats of approved type synthetic paint

to ceiling soffits as per the drawings and Specification.

099100 M² 1,610.33

III. Quartz Paint

9.5 Apply quartz paint to external surface according

to the drawing 099100 M² 380.18

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

10. SPECIALITIES

I. Signage

10.1 Provide plexiglass signage's for parking space as per the drawings and Specifications. Price shall include all accessories to complete the work.

101400

a. Basement-Size: 52*52cm Pcs 1

10.2 Provide plexiglass signs for Fire escape route as per the drawings and Specifications. Price shall include all accessories to complete the work.

101400

a. From Basement to Third floor-Size: 60*20cm Pcs 19.00

10.3 Provide plexiglass signs for Stair case as per the drawings and Specifications. Price shall include all accessories to complete the work.

101400

a. From Basement to Attic floor-Size: 23*46cm Pcs 12.00 b.From Basement to Attic floor-Size: 30*30cm Pcs 12.00

10.4

Provide plexiglass signs for Elevators as per the drawings and Specifications. Price shall include all accessories and labor to complete the work.

101400

a. From Basement to Third floor-Size: 13*21cm Pcs 5.00 b.From Basement to Third floor-Size: 22*22cm Pcs 5.00

10.5 Provide one plexiglass sign depicting International

Symbol of Accessibility (wheelchair) at each toilet room equipped with facilities for the handicapped. Include a male or female pictogram as well as Name. Price shall include all accessories to complete the work.

101400

a. From Ground to Third floor-Size: 30*30cm Pcs 8.00

10.6 Provide one plexiglass sign depicting International

Symbol for males and females. Include a male or female pictogram as well as Name. Price shall include all accessories to complete the work.

101400

a. From Ground to Third floor-Size: 30*30cm Pcs 8.00

RATE

[ETB]

AMOUNT

[ETB]

ITEM

DESCRIPTION

SPEC.

REFERENCE

UNIT QTY

10.7 Provide one plexiglass sign of room name and

number at each door leading into each space and leading signage as per the drawings and Specifications. Price shall include all accessories and labor to complete the work.

101400

a. From Basement to Attic floor-Size: 22*22cm Pcs 128.00

3D-Plaque

10.8 Supply & fix 3D-plaque with English Fonts labeling in upper case [National blood transfusion service] as per the designed scale & dimensions indicated on the drawing. Plaque shall be made of metal plates held suspended 10cm outward from the wall & fixed. Metal plates shall be treated with anti-rust & synthetic paint. Color shall be selected & approved by the architect. Price includes all necessary accessories for fabrication & fixing.

101400

a. West Elevation 60cm height Ls 1

b. East Elevation 32cm height Ls 1

10.9 Provide and paint pavement markings on Cobble

stone pavement, Ramp and basement parking floor as indicated on the drawings and specification. Price includes all necessary accessories for application.

321723 Ls 1

SUMMARY OF BILL OF QUANTITIES

FMOH - NBTS

BIRR USD

TOTAL ……….

1.0 PLUMBING WORKS

2.0 MECHANICAL WORKS

3.0 FIRE FIGHTING

C. TECHNICAL INSTALLATIONS

C.TECHNICAL INSTALLATIONS

1.0 PLUMBING WORKS

INTERNAL SANITARY INSTALLATIONS

i. All plumbing works unit rates shall include all the necessary related incidental works to complete the work.

I. PLUMBING FIXTURES

All fixtures shall be approved quality and subject to the Architect's & Engineers approval, based on samples, catalogues and brochures presented by the contractor. Unit price shall include all the necessary fixing brackets or hooks and all assistance to civil works

013300 013323 016000 017400 017823 141000 102113 115300 115323 224100 230500

Hand wash basins 224100

1.1 Hand wash basins Set 18

1.2 Hand wash basins for physically challenged users Set 8

WC 224100

1.3 Water closet with low level flushing cistern

Set 16

1.4 Water closets for physically challenged users

Set 8

Showers 224100

1.5 Shower units Nº 12

Kitchen sinks 224100

1.6 kitchen sinks, single bowl Nº 1

1.7 kitchen sinks, double bowl Nº 3

Water Heater

1.8 Electrical water heater 223300

a. Capacity : 50 liter Nº 5

b. Capacity : 80 liter Nº 7 Janitor Sinks

1.9 Janitor sinks

a. Size :500x600x400mm 22-48-00 Nº 8

Floor Waste Gullies

1.10 Floor Waste Gullies 22-48-00 Nº 20

Toilet accessories

1.11 Toilet paper holder Nº 24

1.12 Crystal glass mirrors Nº 26

1.13 Towel rail for showers Nº 12

1.14 Soap holder Nº 12

1.15 Automatic soap dispenser Nº 22

1.16 Automatic hand dryer Nº 22

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

Laboratory Appliances

1.17 Laboratory sink 224100 Set 9

1.18 Emergency safety shower with eye wash 224500

Set 2

2.0 II. 'DOMESTIC WATER PIPES & VALVES

210500 210529 220526 220529 220549 220553 220556 220719 221010 230500 230529

2.1 DOMESTIC WATER PIPES

PPR pipes

a. 20mm external LM 210

b. 25mm external LM 150

c. 32mm external LM 110

d. 40mm external LM 20

e. 50mm external LM 66

f. 63mm external LM 35

VALAVES- PPR

2.2 Stop valves of nominal size

a. 20mm diameter Nº 2

b. 25mm diameter Nº 10

c. 32mm diameter Nº 1

d. 40mm diameter Nº 8

d. 50mm diameter Nº 5

d. 63mm diameter Nº 6

2.3 Angle valves of 20mm nominal size Nº 110

2.4 PUMPS

a) Fixed speed Pumps for lifting water to roof cisterns 221123 Pcs 2

b) Boaster water pumps set for emergency showers and third floor appliances

221123.23

Set 1

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

III. DRAINAGE PLUMBINGS SYSTEM

210500 210529 220529 220549 220553 220556 221010 230500 230529

3.1 Waste pipes

3.1.1 uPVC pipes of diameter

a. 50mm LM 300

b. 75mm

LM 90

c. 110mm LM 160

d. 160mm LM 5

3.1.2 For down pipes & storm water water drainage

160 mm diameter LM 185

3.3 Vent caps

a. 50mm diameter Nº 1

b. 75mm diameter Nº 2

c. 110mm diameter Nº 1

3.4 Cleanouts 224800

a. - dia. 50 mm Nº 7 b - dia. 75 mm Nº 6

c. - dia. 110 mm Nº 8

d. - dia. 160 mm Nº 1

226600

3.5 PP pipes for lab waste

a. 50mm LM 300

b. 75mm LM 90

b. 110mm LM 91

IV. WATER RESERVOIRS,TANKERS &

ACCESSORIES 221216

221223

211219

4.1 GRP water tank

4.1.1 Domestic Water Reservoir- GRP 3*2*2m Nº

4.2.2 Roof Water tank- GRP 2*2*2m Nº 2

4.1.3 Fire Water Reservoir- GRP 4*4*2m

Nº 1

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

5.2 Compact Waste treatment

5.2.1 compact high contaminant infectious waste treatment units capacity 2x4000 liters Set 1.0

6.0 WATER PROOFING & SUMP PUMP

033000 035216 071416 071600 075419 221343

6.1 SPECIAL CHARACTERSTICS

Surface Preparation: Concrete surface must be clean and free of dirt, films, coatings or other foreign matter. All surface imperfections and protrusions are to be removed and repaired.

Structurally unsound and friable concrete must be removed and repaired.

Responsibility: the contractor should provide the approved product on site; store it properly in original unopened packing in dry condition and away from sunlight and scorching heat. In addition the application should be made with professionals trained in the preparation, mixing and application.

Testing: Pond testing for at least 24 hours should be done after the contractor has accomplished the water proofing work. The surface should be re-treated if leakage observed; and the test should be done on the repaired surface.

Provide light weight concrete and cement screeding works for bedding of the dam proofing works with proper slope.

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

Supply and install TESTUDO or Equivalent, 4mm thick bitumen plastometric water proofing, manufactured from a rich mixture of bitumen and selected polymer blended together to obtain excellent heat and UV resistant membrane type water proofing as per manufacturers instruction for all suspended exposed slabs, terraces, etc as per Engineer's instruction. Price shall includes the light weight concrete with proper slope and cement screeding and all the necessary works to complete the work. All as per the drawing and specification M² 512

6.1.2 FOSROC Nitoproof 30HL rubberized bitumen emulsion protective coating damp proofing material or equivalent for shear walls, retaining walls and shall be applied according to manufacturer's instruction.

M²

6.1.3 Damp proofing membrane for foundation/

base plate or equivalent . All as per the drawing and specification.

M²

1,600

6.1.4 Bituminous emulsion water proofing system for wet rooms or equivalent M²

6.2 Sump pump for subsurface drainage Nº 2

7.0 CONCRETE DITCH AND MANHOLES

7.1

Construct manholes on a sanitary sewers in precast concrete round pipe on a base of mass concrete with proper slope for smooth flow, concrete walls thick C-25 R.C slab cover and steel bar handles as per the drawing and specification. Price shall include all incidental works to complete the work.

Size Dia. 600mm Nº 15.00

7.2

Construct concrete ditch on a base of mass concrete with proper slope for smooth flow, concrete walls thick C-25 R.C slab cover as per the drawing. Price shall include all incidential works to complete the work.

LM 175.00

TOTAL TO SUMMARY

6.1.1

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

2.0 MECHANICAL WORKS

220553 220719 230501 230502 230529 230548 230549 230553 230556 230593 230713 230719 232400 233113 233700

MECHANICAL WORKS

1 VENTILLATION

1.1

AIR EXTRACTING FANS AND ACCESSORIES

1.1.1

BASEMENT PARKING EXHAUST FAN

Supply,install,test and commission Two Speed Centrifugal Parking Exhaust air Fan according to where shown on respective drawings, complete with electrical control facility, fire rated flexible connection on suction end, isolator switch, concrete pad with vibration isolator and all required mechanical works for complete installation. Exhaust fan shall be fire rated (3000C for 2 hours). Fan shall be rated for project specific. Price shall include all works required to install, test and commission the system.

232400

PEF-1

i) Fan Capacity

Capacity: 3740-6900Liter/second

Total static head ... 450Pa. Nº 1

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

1.1.2

LABORATORY ROOMS EXHAUST AIR FANS

1.1.2.1

Supply,install,test and commission IN-LINE exhaust air fan according to where shown on respective drawings, to be mounted on slab complete with electrical control facility, flexible connection on suction and delivery ends, isolater switch, acoustic cover, support with vibration isolator and all required mechanical works for complete installation. Fan shall be rated for project specific. Price shall include all works required to install, test and commission the system.

232400

I-EF/1

i) Fan Capacity

Capacity: 60Liter/second

Total static head ... 110Pa. Nº 1.0

I-EF/2

i) Fan Capacity

Capacity: 310Liter/second

Total static head ... 225Pa.

Nº

I-EF/3

i) Fan Capacity

Capacity: 1165Liter/second

Total static head ... 250Pa.

Nº

I-EF/4

ii) Fan Capacity

Capacity: 675Liter/second

Total static head ... 250Pa.

Nº

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

1.1.3

WINDOW MOUNTED TOILET AND

ASSEMBILY HALL EXHAUST FAN

1.1.3.1

Supply,install,test and commission Window Mounted Exhaust Fans according to where shown on respective drawings, to be mounted on window complete with electrical control facility with speed selection option , isolator switch, low noise level (up to 45 Db) and associated works.Axial fans shall be tightly fixed and the space around the fans shall be tightly sealed. Price shall include all works required to install, test and commission the system.

232400

Toilet: WMEF-1

i) Fan Capacity

Capacity: 90Liter/second

Total static head ... 20Pa. Nº 8

Assembly Hall: WMEF-2

i) Fan Capacity

Capacity: 215 Liter/second

Total static head ... 300Pa. Nº 1

1.2

AIR SUPPLY FAN AND ACCESSORIES

1.2.1 IN-LINE SUPPLY FAN

1.2.1.1

Supply,install,test and commission IN-LINE Supply air fan according to where shown on respective drawings, to be mounted on slab complete with electrical control facility, flexible connection on suction and delivery ends, isolater switch, washable(cleanable) filter, acoustic cover, support with vibration isolator and all required mechanical works for complete installation. Fan shall be rated for project specific. Price shall include all works required to install, test and commission the system.

I-SF/1

i) Fan Capacity

Capacity: 270Liter/second

Total static head ... 300Pa. Nº 1

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

1.3

KITCHEN HOOD AND ACCESSORIES

1.3.1

Supply, fix, test and commission stainless steel kitchen hood with re-circulating fan according to where shown on the respective drawing and manufacturer's instruction.

- Washable grease filter

- Condensate trap

- Hangers / Support structures

-Light

- Control switch with 20 min. over run

- Back draught shutter

Hood Size : [0.9 x 0.45] meters

Capacity: 83Liter/second

Total static head ... 334Pa. Nº 2

1.4 SUPPLY AND EXHAUST AIR INLETS AND

ACCESSORIES

1.4.1

Supply, fix, test and commission exhaust air grilles according to where shown on the respective drawings and technical specification.

Exhaust grill blades shall be rigid and fire rated (3000C for 2 hours). 233700 i - Capacity =15,30liter/sec /FEg-1/

Size : 150x150mmxmm

Color: As per the Architect's preference

Nº

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

ii - Capacity =60,80liter/sec /FEg-2/

Size : 200x200mmxmm

Color: As per the Architect's preference Nº iii - Capacity =235liter/sec/EGp-1/

Size : 350x350mmxmm

Color: As per the Architect's preference

Nº

1.4.2 Supply, install, test and commission exhaust air grilles with uninsulated factory made plenum box and aluminum flexible duct. The frame shall be made from high quality extruded aluminum profile and standard flange width all as per technical specification .

233700 i - Capacity =35,40,45liter/sec /Eg-1/

Size : 150x150mmxmm

Color: As per the Architect's preference

Nº ii - Capacity =60,80,85,90liter/sec /Eg- 2/

Size : 200x200mmxmm

Color: As per the Architect's preference

Nº iii - Capacity =105,115,130liter/sec /Eg- 3/

Size : 250x250mmxmm

Color: As per the Architect's preference

Nº 7

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

iv - Capacity =145,160,liter/sec /Eg-4/

Size : 300x300mmxmm

Color: As per the Architect's preference

Nº v - Capacity =260liter/sec /Eg-5/

Size : 400x400mmxmm

Color: As per the Architect's preference

Nº

1.4.3 Supply, install, test and commission supply air grilles with uninsulated factory made plenum box and aluminum flexible duct. The frame shall be made from high quality extruded aluminum profile and standard flange width all as per technical specification .

233700 i - Capacity =38liter/sec /Sg-1/

Size : 150x150mmxmm

Color: As per the Architect's preference

Nº ii - Capacity =94,100liter/sec /Sg-2/

Size : 250x250mmxmm

Color: As per the Architect's preference

Nº

1.5 DOOR/TRANSFER GRILLES

1.5.1

Supply, fix, test and commission Door/Transfer grilles with double frame. All frame blades shall be high quality extruded aluminum profiled construction with the advantages of corrosion resistance and rigidity./ Dg/Tg /.

233700

Coordinate color and size of door/transfer grilles with the architects.

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

i - Capacity =40,50liter/sec / Dg-1

Size: 400x200mmxmm

Color: As per the Architect's preference Nº ii - Capacity =60,80,85,90liter/sec / Dg-2

Size: 400x300mmxmm

Color: As per the Architect's preference Nº iii - Capacity =105,115,130liter/sec / Dg-3

Size: 400x400mmxmm

Color: As per the Architect's preference Nº iv - Capacity =180,260liter/sec / Dg-4

Size: 550x400mmxmm

Color: As per the Architect's preference Nº

1.6

INTAKE AND DISCHARGE AIR LOUVERS

1.6.1

Supply, fix, test and commission weather proof discharge air louvers complete with all required accessories. 233700 i - Capacity =60liter/sec /EL-1/

Size : 200x200mmxmm

Color: As per the Architect's preference Nº ii - Capacity =310liter/sec /EL-2/

Size : 400x400mmxmm

Color: As per the Architect's preference Nº iii - Capacity =1165liter/sec /EL-2/

Size : 1200x400mmxmm

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

Color: As per the Architect's preference Nº iv - Capacity =675liter/sec /EL-3/

Size : 800x400mmxmm

Color: As per the Architect's preference Nº

1.6.2

Supply, fix, test and commission weather proof intake air louver complete with all required accessories. 233700 i - Capacity =270liter/sec /FIL-1/

Size : 400x400mmxmm

Color: As per the Architect's preference Nº ii - Capacity =310liter/sec /FIL-2/

Size : 600x600mmxmm

Color: As per the Architect's preference Nº iii - Capacity =583,675liter/sec /FIL-3/

Size : 750x750mmxmm

AMOUNT

[ETB]

RATE

[ETB]

ITEM UNIT QTY

SPEC.

REFERENCE

DESCRIPTION

Color: As per the Architect's preference Nº

1.7

BLACK STEEL SHEET AIR DUCT

1.7.1

Supply, fabricate, fix, test and commission duct work made of 1.5 mm thick black steel sheet according to where shown on the respective drawing and technical specification.