SF241-0022.pdf
Standard Form PDF 124 KB Posted
- Solicitation number
- SF241-0022
- Issued by
-
Department of the Air Force
About this file
This document is a federal contract opportunity solicitation for the development of an ultra-broadband infrared imaging system.
The requirement calls for development of an infrared imager with an ultrawide bandpass spanning the Near Infrared (NIR) to Mid-Wave Infrared (MWIR) spectrum from 0.7 to 5.5 micrometers. The imager must feature a focal plane array of at least 2040 x 1100 pixels with pixel pitch no greater than 5 micrometers, capable of acquiring full-frame images at minimum 500 frames per second with an f-number of f/2.4 preferred. The system must include an integral filter wheel with at least four positions accommodating warm bandpass and neutral density filters, designed to prevent ghosting and image artifacts. Performance specifications require high sensitivity with well depth of at least 1.8 x 10⁶ electron-volts, noise floor not exceeding 150 µV, and minimum detectable temperature difference of 35 mK. The infrared detector material InAsSb is identified as an enabling technology for consideration. Phase I involves feasibility analysis, identification of high-risk technical elements, and development of a conceptual design matrix showing how design parameters impact system requirements. Phase II focuses on maturing the conceptual design into a detailed design, developing iterative prototypes to validate the approach, and delivering a fully operational prototype imager with validated design documentation for future production. Phase III applications include limited production for integration into existing military signature measurement systems and potential commercial applications in security, surveillance, and industrial thermometry. The technology is restricted under ITAR (International Traffic in Arms Regulation) and EAR (Export Administration Regulation), requiring disclosure of any proposed foreign national participation. No CMMC level requirement applies. No Technical Point of Contact is designated.
View the file
Other versions and copies of SF 241
Show all 16
Who attaches SF 241
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SF241-0022: Ultra-Broadband High-Definition High-Frame Rate NIR-MWIR Imager
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Sensors | Space Platforms
MODERNIZATION PRIORITIES:
Integrated Sensing and Cyber
KEYWORDS:
Near Infrared, NIR, InAsSb, Indium Arsenide Antimonide, focal plane array
ADDITIONAL INFORMATION
N/A
OBJECTIVE:
Development of an infrared imager with an ultrawide bandpass encompassing the Near Infrared (NIR) to the Mid- Wave Infrared (MWIR) spectrum: 0.7 micrometers to 5.5 micrometers.
ITAR:
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
DESCRIPTION:
Broadband infrared imagers are required to characterize signatures of military targets, both cooperative and hostile. The specific need is the characterization of missile plume and hardbody signatures in static and free flight tests. This threat characterization supports the design and testing of missile warning and countermeasure systems. The combination of a broadband imager with multiple filters allows registered imagery to be acquired in multiple bands, covering a broader spectral range than currently available hyperspectral imagers. The multi-band ultra-broadband data would also be useful in temperature/emissivity determination of hypersonic thermal protection systems during ground tests in arc-heated facilities. The infrared detector material InAsSb is an enabling technology to be considered.
The focal plane of the imager should consist of at least 2040 x 1100 pixels with a pixel pitch no greater than 5 ❍m.
Full-frame frame rate needs to be at least 500 frames/sec. An f# of f/2.4 is preferred. An integral filter wheel with at least 4 positions accommodating both warm bandpass and neutral density filters in each position is required. Special attention is required to ensure the sandwiching of bandpass and neutral density filters does not result in ghosting or other image artifacts. The filter wheel should not only remotely addressable, but should be able to be driven at some rate during a data collection. The acquisition of high-rate multispectral registered imagery in several sub-bands along with the wideband (in a single imager) is the requirement. High sensitivity is also required, with a well depth of at least 1.8 x106 electron-volts, a noise floor of no greater than 150 �V, and a minimum detectable temperature difference of 35 mK.
PHASE I:
The Phase 1 effort should develop and prove the feasibility of the proposed approach through an analysis of alternatives, identification of high-risk technical elements, and generation of a conceptual design matrix that lays out how achievable design parameters impact system requirements – e.g. frame rate achievable as a function of focal plane array size. The system design should be sufficiently detailed to guide the Phase II work with a minimum of risk. The Phase I effort will culminate in a conceptual design that optimally meets system requirements and a detailed plan for development of a prototype system during the Phase II effort.
PHASE II:
The conceptual design will be matured into a detailed design. Iterative prototypes will be developed to validate the fundamental approach. The Phase II effort will culminate in the demonstration and delivery of a fully operational prototype imager along with a validated design for future larger scale production.
PHASE III DUAL USE APPLICATIONS:
Phase III efforts would include a limited production of a number of imagers for inclusion in existing signature measurement systems, such as the Arnold Engineering Development Complex Field Measurement Team and the Center for Countermeasures Joint Standard Instrumentation Suite. Broadband infrared imagers of this type would find wide military application for surveillance, night vision, and target detection, identification, and tracking. As mentioned above, applications for non-contact temperature/emissivity measurements for hypersonic systems and other defense applications are also possible. Commercial applications for security, surveillance, and non-contact imaging thermometry for manufacturing should also be pursued. Infrared imagers are now a ubiquitous piece of laboratory hardware. Advances in infrared imagery will find wide application supporting many disciplines.
REFERENCES:
Rogalski A, Martyniuk P, Kopytko M, Madejczyk P, Krishna S. “InAsSb-Based Infrared Photodetectors: Thirty Years Later On.” Sensors (Basel). 2020 Dec 9
1.
20(24):7047. doi: 10.3390/s20247047. PMID: 33317004
2.
PMCID: PMC7763214
3.
Ting, David Z., Sir B. Rafol, Arezou Khoshakhlagh, Alexander Soibel, Sam A. Keo, Anita M. Fisher, Brian J.
Pepper, Cory J. Hill, and Sarath D. Gunapala. 2020. "InAs/InAsSb Type-II Strained-Layer Superlattice Infrared Photodetectors" Micromachines 11, no. 11: 958. https://doi.org/10.3390/mi11110958
4.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .