Ultra-Broadband High-Definition High-Frame Rate NIR-MWIR Imager

Closed Solicitation Posted

Solicitation number
SF241-0022
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Department of the Air Force, through USAF Command AFTC-AEDC, seeks Phase I development of an ultra-broadband NIR-MWIR imager under DoD SBIR topic SF241-0022, with proposals due February 21, 2024; that deadline has passed as of November 17, 2026. The procurement is a Total Small Business set-aside.

The imager must cover 0.7 to 5.5 micrometers, spanning the Near Infrared to Mid-Wave Infrared range. The focal plane must consist of at least 2040 x 1100 pixels with a pixel pitch no greater than 5 micrometers, and full-frame rate must reach at least 500 frames per second. An f/2.4 f-number is preferred. An integral filter wheel with at least four positions must accommodate both warm bandpass and neutral density filters in each position, without ghosting or other image artifacts. The filter wheel must be remotely addressable and capable of being driven during data collection. InAsSb is identified as an enabling detector technology to be considered.

Phase I covers feasibility analysis, identification of high-risk technical elements, and a conceptual design matrix linking design parameters to system requirements. Phase II matures the design into a detailed design, builds iterative prototypes, and delivers a fully operational prototype imager with validated design documentation. Phase III includes limited production for integration into military signature measurement systems and potential commercial applications in security, surveillance, and industrial thermometry.

The technology is ITAR-controlled, and the government file summary states it is also subject to the EAR. Any proposed foreign national participation must be disclosed. No CMMC level applies. The NAICS code is 541715, and the PSC is AC12, National Defense R&D Services.

Notice text

DoD SBIR topic SF241-0022

Component: USAF

Command: AFTC-AEDC

Phase: SBIR Program Phase I Action

Technology Areas: Sensors; Space Platforms

Focus Areas: Integrated Sensing and Cyber

Keywords: <p>Near Infrared; NIR; InAsSb; Indium Arsenide Antimonide; focal plane array</p>

ITAR: Yes

Objective:

Development of an infrared imager with an ultrawide bandpass encompassing the Near Infrared (NIR) to the Mid-Wave Infrared (MWIR) spectrum: 0.7 micrometers to 5.5 micrometers.

Description:

Broadband infrared imagers are required to characterize signatures of military targets, both cooperative and hostile.  The specific need is the characterization of missile plume and hardbody signatures in static and free flight tests.  This threat characterization supports the design and testing of missile warning and countermeasure systems.  The combination of a broadband imager with multiple filters allows registered imagery to be acquired in multiple bands, covering a broader spectral range than currently available hyperspectral imagers.  The multi-band ultra-broadband data would also be useful in temperature/emissivity determination of hypersonic thermal protection systems during ground tests in arc-heated facilities.  The infrared detector material InAsSb is an enabling technology to be considered. 


The focal plane of the imager should consist of at least 2040 x 1100 pixels with a pixel pitch no greater than 5 ❍m.  Full-frame frame rate needs to be at least 500 frames/sec.  An f# of f/2.4 is preferred.  An integral filter wheel with at least 4 positions accommodating both warm bandpass and neutral density filters in each position is required.  Special attention is required to ensure the sandwiching of bandpass and neutral density filters does not result in ghosting or other image artifacts.  The filter wheel should not only remotely addressable, but should be able to be driven at some rate during a data collection.  The acquisition of high-rate multispectral registered imagery in several sub-bands along with the wideband (in a single imager) is the requirement.  High sensitivity is also required, with a well depth of at least 1.8 x106 electron-volts, a noise floor of no greater than 150 V, and a minimum detectable temperature difference of 35 mK.  

Phase I:

The Phase 1 effort should develop and prove the feasibility of the proposed approach through an analysis of alternatives, identification of high-risk technical elements, and generation of a conceptual design matrix that lays out how achievable design parameters impact system requirements – e.g. frame rate achievable as a function of focal plane array size. The system design should be sufficiently detailed to guide the Phase II work with a minimum of risk. The Phase I effort will culminate in a conceptual design that optimally meets system requirements and a detailed plan for development of a prototype system during the Phase II effort.

Phase II:

The conceptual design will be matured into a detailed design. Iterative prototypes will be developed to validate the fundamental approach. The Phase II effort will culminate in the demonstration and delivery of a fully operational prototype imager along with a validated design for future larger scale production.

Phase III:

Phase III efforts would include a limited production of a number of imagers for inclusion in existing signature measurement systems, such as the Arnold Engineering Development Complex Field Measurement Team and the Center for Countermeasures Joint Standard Instrumentation Suite. Broadband infrared imagers of this type would find wide military application for surveillance, night vision, and target detection, identification, and tracking. As mentioned above, applications for non-contact temperature/emissivity measurements for hypersonic systems and other defense applications are also possible. Commercial applications for security, surveillance, and non-contact imaging thermometry for manufacturing should also be pursued. Infrared imagers are now a ubiquitous piece of laboratory hardware. Advances in infrared imagery will find wide application supporting many disciplines.

Files

File Type Posted
SF241-0022.pdf PDF

Similar open opportunities

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors