SF241-0014.pdf
Standard Form PDF 46 KB Posted
- Attached to
- MUOS SATCOM Simulator Connectivity Over IP
- Solicitation number
- SF241-0014
- Issued by
-
Department of the Air Force
About this file
This document is a Statement of Objectives (SOO) for a Small Business Innovation Research (SBIR) contract topic titled "MUOS SATCOM Simulator Connectivity Over IP" (SF241-0014). The Air Force seeks to develop remote IP-based connectivity capabilities for MUOS satellite communication simulators to enable global testing of MUOS-equipped terminals without requiring direct hardwired connections. Currently, the "Mighty MUOOS" simulator—built by W5 Technologies under contract FA8750-18-C-0198—only operates with direct connections and is limited to ARC-210 radio compatibility. The required expansion must support additional SATCOM terminals operating in MUOS frequency ranges, including at minimum the PRC-117G radio set, and establish connectivity through the AFIN or other IP-based networks, accommodating both non-secure and secure (SIPRNet) connections in Phase III.
Phase I requires demonstrating understanding of current MUOS SATCOM simulator capabilities, Air Force testing requirements, SysML and Model Based Systems Engineering (MBSE) tools, COMSAT terminal representation, and AFSIM capabilities for modeling complex SATCOM simulators. Phase II deliverables include optimal simulator-to-terminal configurations using hardware-agnostic SysML or MBSE models, methods for representing complex multi-purpose systems, unclassified scenarios demonstrating network-based simulator-to-terminal transmission capability, and comprehensive documentation in model-based formats for sharing and reuse by other developers. Phase III implements an open architecture interface at the physical level for a specific MUOS simulator with customizable hardware, software, processor, modes, and algorithms capable of supporting connectivity with any USAF SATCOM terminal currently in operational use. No CMMC level requirement applies to this topic, and the Technology Areas include Air Platform, Battlespace, and Space Platforms with Modernization Priorities in Integrated Network Systems-of-Systems and Space Technology.
View the file
Other versions and copies of SF 241
Show all 16
Who attaches SF 241
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SF241-0014: MUOS SATCOM Simulator Connectivity Over IP
PROJECTED CMMC LEVEL REQUIREMENT:
N/A
TECHNOLOGY AREAS:
Air Platform | Battlespace | Space Platforms
MODERNIZATION PRIORITIES:
Integrated Network Systems-of-Systems | Space Technology
KEYWORDS:
MUOS, MUOOS, IP connectivity Radio Frequency; ARC-210 Gen 6, PRC-117G
ADDITIONAL INFORMATION
N/A
OBJECTIVE:
The objective of this topic is to explore the available configurations of MUOS SATCOM simulators to achieve Air Force mission objectives. The USAF requires a mission engineering and testing tool to evaluate the most appropriate combination of software and processing simulation capability to achieve end to end connectivity analysis with the MUOS satellite constellation. These capabilities should be captured and communicated in a SysML or other MBSE model. At minimum, this is for a single simulator configuration, the Mighty MUOOS," but we will give preferred consideration for multi-satellite communications simulators.
DESCRIPTION:
The DoD is transferring from legacy SATCOM systems to the MUOS constellation, This transfer will require significant testing to ensure that legacy terminals ae able to work with the MUOS constellation. Currently , this testing can be performed using the MUOOS simulator or by requesting live satellite time. A simulator, the "Mighty MUOOS," was built and deployed by W5 Technologies under contract FA8750-18-C-0198. However, the MUOOS simulator requires a direct connection (hard wire) between the radio under test and the MUOOS. The USAF requires a global capability to test MUOS equipped terminals like the ARC-210 Gen 6 and to do so, must connect MUOS capable radio terminals and the simulator remotely, via the AFIN or another IP-based network, to test and evaluate data and voice payloads top be passed over the MUOS constellation. Currently the simulator may only be used with an ARC-210 radio. In the interest of expanding the usability of the simulator, identify the feasibility of using the simulator with any SATCOM terminal that operates in the MUOS frequency ranges, including as a minimum, the PRC-117G radio set. This SIBR requests that an investigator identify, test and the evaluate the most appropriate combination of software and processing capability to achieve these ends. These capabilities should be captured and communicated in a SysML or other MBSE model. At minimum, this is for a single simulator to terminal configuration, but we will give preferred consideration for multi-platform configurations. This topic is not focused on a specific production simulator, and the expectation is to model connectivity for any SATCOM simulator that connects to a terminal directly for testing. It is expected that in Phase III, the performer will implement an open architecture interface at the physical level on at least the AF NIPRNet Network and, preferably, for a SIPRNet connection as well.
PHASE I:
Demonstrate understanding of current capabilities MUOS SATCOM simulators and how those relate to AF testing requirements. Demonstrate understanding of SysML and MBSE tools as well as the understanding of how to represent COMSAT terminals in this format. Demonstrate understanding of AFSIM capabilities and methods to represent complex SATCOM simulators, particularly MUOSbased simulators in this format.
PHASE II:
Develop optimal configurations for MUOS simulators mapped to Air Force SATCOM terminals using Interconnectivity, both non-secure and secure. Present hardware-agnostic model of the IP terminal to simulator linkage using SysML or other Model Based Systems Engineering (MBSE) tools and best practices. Develop ways to represent complex, multi-purpose systems in SysML or other MBSE tools for effective analysis. Develop and present an unclassified scenario(s) to demonstrate the network-based simulator to terminal transmission capability and modeling the desired capability to capture effectiveness of remote network based connections compared to traditional approaches. Capture all documentation and results in the model based form that can be shared and re-used by other developers and/or RY divisions.
PHASE III DUAL USE APPLICATIONS:
Implement an open architecture interface at the physical level for a specific MUOS simulator to include the hardware, software, processor, modes and algorithms. The interface will be capable of customization to support connectivity of any USAF SATCOM terminal currently in use to the simulator.
REFERENCES:
AF171-0431.
Mobile User Objective System (MUOS) for Moderate Data Rate Communications (MMDR)
2.
TECHNICAL POINT OF CONTACT (TPOC):
None
File details come from the government source that posted it. Updated .