SF241-0018.pdf

Standard Form PDF 49 KB Posted

Attached to
Mitigating Negative Effects of Polysulfide Dissolution in 18650 Lithium Sulfur Battery
Solicitation number
SF241-0018
Issued by

About this file

SF 241-0018: Mitigating Negative Effects of Polysulfide Dissolution in 18650 Lithium Sulfur Battery

This document is a Statement of Objectives for a U.S. Space Force Small Business Innovation Research (SBIR) topic. The objective is to improve cycle life and capacity retention of Lithium-Sulfur battery chemistry by addressing parasitic polysulfide reactions that cause performance degradation. Current 18650 Li-ion cells used in space missions achieve only 150 W-h/kg specific energy, while the USSF target is 450 W-h/kg. Lithium-Sulfur chemistry offers 2600 W-h/kg theoretical specific energy but suffers from polysulfide shuttling—the dissolution of lithium polysulfides in liquid electrolyte resulting in parasitic reactions and low volumetric energy density. The research must investigate and develop solutions that suppress polysulfide diffusion from the cathode or protect the lithium anode from dissolved polysulfides, including modeling, materials synthesis, and characterization of anode, cathode, separator, and/or electrolyte materials.

Phase I requires feasibility investigation of practical solutions, proof-of-concept material synthesis and characterization, and cell-level modeling with deliverables of small material quantities and a cell-level model. Phase II continues optimization of materials through testing in coin cell, pouch cell, and other methodologies, optimizes the Li-S cell model, and constructs 18650 cells for electrochemical performance testing to AIAA S-144-202X standards with performance targets of 450 W-h/kg specific energy and 500 cycles at 80% capacity retention at 20% depth of discharge. Phase III involves transitioning the technology to the USSF supply chain through AIAA S-144-202X qualification. No CMMC requirement applies, and no Technical Point of Contact is listed.

View the file

Other versions and copies of SF 241

File Revision Posted Attached to
SF241-0020.pdf Revision not stated Trusted Automated Satellite Operations for Mission Life
SF241-0023.pdf Revision not stated Low Latency Space Object Maneuver Detection
SF241-0024.pdf Revision not stated Evaluating Data Strategies in Training AI Solutions for Space C2
SF241-0017.pdf Revision not stated Satellite Cyber Immune Response to Evolving Threats
SF241-0022.pdf Revision not stated Ultra-Broadband High-Definition High-Frame Rate NIR-MWIR Imager
SF241-0021.pdf Revision not stated Optical Interconnects for High-Speed High-Efficiency Intra-satellite Data Transfer in the Space Environment
SF241-0016.pdf Revision not stated Numerical Simulation of VLF Antennas in Space Plasma
SF241-0013.pdf Revision not stated Planar Hyperspectral Imager
SF241-D024.pdf Revision not stated 15 SPSS Path to Production Development for Electro-Optical Sensor Scheduling Software Modernization
SF241-0019.pdf Revision not stated Resonator Laser Gyro
SF241-0015.pdf Revision not stated Securely Operating Through 5G for Enterprise Space Data Transport Applications
SF241-D026.pdf Revision not stated Digital Spaceport of the Future
SF241-0025.pdf Revision not stated Modernizing USSF BMT
SF241-D023.pdf Revision not stated Automated MBSE Model Generation of Space Systems
SF241-D025.pdf Revision not stated Alternative Position, Navigation, and Timing
SF241-0014.pdf Revision not stated MUOS SATCOM Simulator Connectivity Over IP
Show all 16

Who attaches SF 241

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF241-0018: Mitigating Negative Effects of Polysulfide Dissolution in 18650 Lithium Sulfur Battery

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Electronics | Materials | Space Platforms

MODERNIZATION PRIORITIES:

Advanced Materials | Microelectronics | Renewable Energy Generation and Storage | Space Technology | Trusted AI and Autonomy

KEYWORDS:

Rechargeable Battery; Lithium-Sulfur; High Specific Energy; Polysulfide Shuttling

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

The objective of this topic is to improve cycle life and capacity retention of Lithium-Sulfur battery chemistry by addressing and resolving negative effects of parasitic polysulfide reactions.

DESCRIPTION:

The current state-of-practice specific energy in 18650 Li-ion cells used in space missions is as low as 150 W-h/kg.

Lithium-Sulfur, with its 2600 W-h/kg theoretical specific energy, has been identified as a promising chemistry to achieve for the U.S. Space Force's (USSF) short-term 18650 rechargeable battery target of 450 W-h/kg. A higher energy rechargeable power source would have impacts across all areas of the USSF mission to enable spacecraft resilience and survivability. Most practical issues with Lithium-Sulfur chemistry can be attributed to “polysulfide shuttling”, the dissolution of Lithium Polysulfide in liquid electrolyte which results in parasitic reactions and its relatively low volumetric energy density, especially when in a small form factor battery cell such as an 18650.

These reactions cause low Sulfur utilization and capacity fade, resulting in poor cycling efficiency. Recent efforts have been focused on either (1) suppressing diffusion of the dissolved polysulfides out of the cathode, or (2) protecting the lithium anode from reacting with the dissolved polysulfides. Li-S modelling is necessary to understand the technology development way-forward. This topic proposes the investigation of these or other methods to mitigate the inhibiting effects of polysulfide dissolution and improve its volumetric energy density.

Findings will be incorporated into materials and 18650 cell design that can improve cycle life performance while maintaining a high specific energy intrinsic to the chemistry.

PHASE I:

Investigate the feasibility of practical solutions to the polysulfide dissolution problem affecting the lithium-sulfur chemistry while maintaining a high 18650 specific energy and energy density. Using the results of this investigation, synthesize and characterize proof-of-concept anode, cathode, separator, and/or electrolyte materials that will provide a potential for improved cycle life and capacity retention to be used in the 18650 cell form factor. Model proposed Li-S cell-level performance. A small quantity of material and the cell-level model are encouraged Phase I deliverables.

PHASE II:

Continue the research efforts initiated in Phase I. Optimize materials and test the impact on the cyclability of resultant Lithium-Sulfur cells using coin cell, pouch cell, and/or other cell methodology. Optimize Li-S cell model.

Utilizing the materials developed during Phase I and optimized during Phase II, construct 18650 cells and provide an appropriate number of cell samples to conduct electrochemical performance testing to AIAA S-144-202X.

Performance targets for deliverables include specific energy of 450 W-h/kg at the 18650 cell level and 500 cycles of at least 80% capacity retention at 20% DOD.

PHASE III DUAL USE APPLICATIONS:

Transition technology to the USSF supply chain by completing AIAA S-144-202X qualification. Lithium-Sulfur battery chemistry is the USSF’s most near-term high specific energy storage solution. Successful Phase I and II development provides opportunities for transition to the USSF's supply chain into programs of record.

REFERENCES:

Li, et al. "Status and prospects in sulfur-carbon composites as cathode materials for rechargeable lithium-sulfur batteries." Carbon, 92. 2015

1.

Zhang, Sheng S. "Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions." Journal of Power Sources, 231. 2013

2.

Cheon, et al. "Rechargeable Lithium Sulfur Battery: Structural Change of Sulfur Cathode During Discharge and Charge." Journal of The Electrochemical Society, 150(6). 2003

3.

Cheon, et al. "Rechargeable Lithium Sulfur Battery: Rate Capability and Cycle Characteristics." Journal of The Electrochemical Society, 150(6). 2003

4.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .