MUOS SATCOM Simulator Connectivity Over IP

Closed Solicitation Posted

Solicitation number
SF241-0014
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Department of the Air Force, through AFLCMC-HB, solicited proposals for MUOS SATCOM Simulator Connectivity Over IP, a DoD SBIR Phase I topic (SF241-0014) under a Total Small Business set-aside, with proposals due February 21, 2024. That deadline has passed.

The Air Force requires a mission engineering and testing tool for remote IP-based connectivity between MUOS-capable terminals and MUOS simulators, carried over AFIN or another IP-based network to test voice and data payloads over the MUOS constellation. The existing Mighty MUOOS simulator, built by W5 Technologies under contract FA8750-18-C-0198, requires a hardwired connection and works only with the ARC-210 radio. The expansion must support additional SATCOM terminals in MUOS frequency ranges, including at minimum the PRC-117G radio set. Phase I demonstrates understanding of MUOS simulator capabilities, Air Force testing requirements, SysML and MBSE tools, COMSAT terminal representation, and AFSIM. Phase II delivers hardware-agnostic SysML or MBSE models, unclassified network-based transmission scenarios, and model-based documentation. Phase III implements an open-architecture physical-level interface for a specific simulator that supports connectivity with any USAF SATCOM terminal currently in operational use, and according to the attachment summary, accommodates non-secure and secure (SIPRNet) connections.

The NAICS code is 541715, Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology), and the PSC is AC12, National Defense R&D Services. Technology areas are Air Platform, Battlespace, and Space Platforms. The topic is not ITAR-controlled, and no CMMC level requirement applies.

Notice text

DoD SBIR topic SF241-0014

Component: USAF

Command: AFLCMC-HB

Phase: SBIR Program Phase I Action

Technology Areas: Air Platform; Battlespace; Space Platforms

Focus Areas: Integrated Network Systems-of-Systems; Space Technology

Keywords: <p>MUOS, MUOOS, IP connectivity Radio Frequency; ARC-210 Gen 6, PRC-117G</p>

ITAR: No

Objective:

The objective of this topic is to explore the available configurations of MUOS SATCOM simulators to achieve Air Force mission objectives. The USAF requires a mission engineering and testing tool to evaluate the most appropriate combination of software and processing simulation capability to achieve end to end connectivity analysis with the MUOS satellite constellation. These capabilities should be captured and communicated in a SysML or other MBSE model. At minimum, this is for a single simulator configuration, the Mighty MUOOS," but we will give preferred consideration for multi-satellite communications simulators.

Description:

The DoD is transferring from legacy SATCOM systems to the MUOS constellation, This transfer will require significant testing to ensure that legacy terminals ae able to work with the MUOS constellation. Currently , this testing can be performed using the MUOOS simulator or by requesting live satellite time. A simulator, the "Mighty MUOOS," was built and deployed by W5 Technologies under contract FA8750-18-C-0198. However, the MUOOS simulator requires a direct connection (hard wire) between the radio under test and the MUOOS. The USAF requires a global capability to test MUOS equipped terminals like the ARC-210 Gen 6 and to do so, must connect MUOS capable radio terminals and the simulator remotely, via the AFIN or another IP-based network, to test and evaluate data and voice payloads top be passed over the MUOS constellation. Currently the simulator may only be used with an ARC-210 radio. In the interest of expanding the usability of the simulator, identify the feasibility of using the simulator with any SATCOM terminal that operates in the MUOS frequency ranges, including as a minimum, the PRC-117G radio set. This SIBR requests that an investigator identify, test and the evaluate the most appropriate combination of software and processing capability to achieve these ends. These capabilities should be captured and communicated in a SysML or other MBSE model. At minimum, this is for a single simulator to terminal configuration, but we will give preferred consideration for multi-platform configurations. This topic is not focused on a specific production simulator, and the expectation is to model connectivity for any SATCOM simulator that connects to a terminal directly for testing. It is expected that in Phase III, the performer will implement an open architecture interface at the physical level on at least the AF NIPRNet Network and, preferably, for a SIPRNet connection as well.

Phase I:

Demonstrate understanding of current capabilities MUOS SATCOM simulators and how those relate to AF testing requirements. Demonstrate understanding of SysML and MBSE tools as well as the understanding of how to represent COMSAT terminals in this format. Demonstrate understanding of AFSIM capabilities and methods to represent complex SATCOM simulators, particularly MUOSbased simulators in this format.

Phase II:

Develop optimal configurations for MUOS simulators mapped to Air Force SATCOM terminals using Interconnectivity, both non-secure and secure. Present hardware-agnostic model of the IP terminal to simulator linkage using SysML or other Model Based Systems Engineering (MBSE) tools and best practices. Develop ways to represent complex, multi-purpose systems in SysML or other MBSE tools for effective analysis. Develop and present an unclassified scenario(s) to demonstrate the network-based simulator to terminal transmission capability and modeling the desired capability to capture effectiveness of remote network based connections compared to traditional approaches. Capture all documentation and results in the model based form that can be shared and re-used by other developers and/or RY divisions.

Phase III:

Implement an open architecture interface at the physical level for a specific MUOS simulator to include the hardware, software, processor, modes and algorithms. The interface will be capable of customization to support connectivity of any USAF SATCOM terminal currently in use to the simulator.

Files

File Type Posted
SF241-0014.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
Multiple Telemetry Site Signal Source Synchronization NAICS 541715 Air Force Materiel Command Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors