S02 - 556-23-105_Roadway_Sidewalk_Improvements-Equipment_Specification_Sheets.pdf

Roadway and Sidewalk Improvements VA Contract #36C252-23-D-0061 Captain James A. Lovell Federal Health Care Center (FHCC) Task Order #36C25223N0618 U.S. Department of Veterans Affairs, North Chicago, IL VA Project #556-23-105

APPENDIX 08

Equipment Specification Sheets

Lighting

One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.acuitybrands.com © 2018-2023 Acuity Brands Lighting, Inc. All rights reserved.

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

RSX1 LED

Area Luminaire

Specifications

Catalog Number

Notes

Type

Introduction The new RSX LED Area family delivers maximum value by providing significant energy savings, long life and outstanding photometric performance at an affordable price. The RSX1 delivers 7,000 to 17,000 lumens allowing it to replace 70W to 400W HID luminaires.

The RSX features an integral universal mounting mechanism that allows the luminaire to be mounted on most existing drill hole patterns. This “no-drill” solution provides significant labor savings. An easy-access door on the bottom of mounting arm allows for wiring without opening the electrical compartment. A mast arm adaptor, adjustable integral slipfitter and other mounting configurations are available.

EPA

(ft2@0°):

0.57 ft2 (0.05 m2)

Length: 21.8” (55.4 cm) (SPA mount)

Width: 13.3” (33.8 cm)

Height: 3.0" (7.6 cm) Main Body 7.2” (18.4 cm) Arm

Weight:

(SPA mount):

22.0 lbs (10.0 kg)

Hit the Tab key or mouse over the page to see all interactive elements.

L

W

H

Options Finish

Shipped Installed HS House-side shield 7

PE Photocontrol, button style 8,9

PER7 Seven-wire twist-lock receptacle only (no controls) 9,10,11

SF Single fuse (120, 277, 347) 5

DF Double fuse (208, 240, 480) 5

SPD20KV 20KV Surge pack (10KV standard) FAO Field adjustable output 9

DMG 0-10V dimming extend out back of housing for external control (control ordered separate) 9

Shipped Installed *Standalone and Networked Sensors/Controls (factory default settings, see table page 9) NLTAIR2 PIRHN nLight AIR generation 2, with Networked, Bi-Level motion/ambient sensor 9, 12, 13, 14

BAA Buy America(n) Act Compliant CCE Coastal Construction15

*Note: NLTAIR2 PIRHN with nLight Air can be used as a standalone or networked solution. Sensor coverage pattern is affected when luminaire is tilted.

Shipped Separately (requires some field assembly) EGS External glare shield 7

EGFV External glare full visor (360° around light aperture) 7

BS Bird spikes 16

DDBXD Dark Bronze DBLXD Black DNAXD Natural Aluminum DWHXD White DDBTXD Textured Dark Bronze DBLBXD Textured Black DNATXD Textured Natural Aluminum DWHGXD Textured White

WW

Ordering Information EXAMPLE: RSX1 LED P4 40K R3 MVOLT SPA DDBXD

RSX1 LED

Series Performance Package

Color Temperature Distribution Voltage Mounting

RSX1 LED P1

P2 P3 P4

30K 3000K 40K 4000K 50K 5000K

R2 Type 2 Wide R3 Type 3 Wide R3S Type 3 Short R4 Type 4 Wide R4S Type 4 Short R5 Type 5 Wide 1

R5S Type 5 Short 1

AFR Automotive Front Row AFRR90 Automotive Front Row

Right Rotated AFRL90 Automotive Front Row

Left Rotated

MVOLT (120V-277V) 2

HVOLT (347V-480V) 3

XVOLT (277V-480V) 4

(use specific voltage for options as noted) 120 3 277 5

208 3 347 5

240 3 480 5

SPA Square pole mounting (3.0" min. SQ pole for 1 at 90°, 3.5" min. SQ pole for 2, 3, 4 at 90°) RPA Round pole mounting (3.2" min. dia. RND pole for 2, 3, 4 at 90°, 3.0" min. dia. RND pole for 1 at 90°, 2 at 180°, 3 at 120°) MA Mast arm adaptor (fits 2-3/8" OD horizontal tenon) IS Adjustable slipfitter (fits 2-3/8" OD tenon) 6

WBA Wall bracket 1

WBASC Wall bracket with surface conduit box AASP Adjustable tilt arm square pole mounting 6

AARP Adjustable tilt arm round pole mounting 6

AAWB Adjustable tilt arm with wall bracket 6

AAWSC Adjustable tilt arm wall bracket and surface conduit box 6

Items marked by a shaded background qualify for the Design Select program and ship in 15 days or less. To learn more about Design Select, visit www.acuitybrands.com/designselect.

*See ordering tree for detailsDesign Select options indicated by this color background.

17OCT23 COR Note: Since late 2021, the electrical shop at Lovell FHCC has been ordering these heads (Lithonia Lighting RSX 1 LED P4 40k R4 MVOLT RPA DNAXD) to replace older ones as needed. A/E may recommend/specify this type/brand or other LED lighting after determining site needs per survey and verifying if lights are compliant with related code and VA design requirements.

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Ordering Information

NOTES

1 Any Type 5 distribution, is not available with WBA.

2 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz).

3 HVOLT driver operates on any line voltage from 347-480V (50/60 Hz).

4 XVOLT driver not available with P1 or P2. XVOLT driver operates on any line voltage from 277V-480V (50/60 Hz). XVOLT not available with fusing (SF or DF) and not available with PE.

5 Single fuse (SF) requires 120V, 277V or 347V. Double fuse (DF) requires 208V, 240V or 480V.

6 Maximum tilt is 90° above horizontal.

7 It may be ordered as an accessory.

8 Requires MVOLT or 347V.

9 Two or more of the following options cannot be combined including PE, DMG, PER7, FAO and NLTAIR2 PIRHN. (Exception: PE and FAO can be combined; also PE and DMG can be combined.)

10 Compatible with standard twist-lock photocells for dusk to dawn operation or advanced control nodes that provide 0-10V dimming signals. Wire 4/Wire 5 wired to dimming leads on driver. Wire6/Wire7 capped inside luminaire. Twistlock photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories.

Shorting Cap included.

11 For units with option PER7, the mounting must be restricted to +/- 45° from horizontal aim per ANSI C136.10-2010.

12 Must be ordered with PIRHN.

13 Requires MVOLT or HVOLT.

14 Must be ordered with NLTAIR2. For additional information on PIRHN visit here.

15 CCE option not available with WBA, WBASC, AASP, AARP, AAWB, AAWBSC, EGS, EGFV and BS.

16 Must be ordered with fixture for factory pre-drilling.

17 Requires luminaire to be specified with PER7 option. Ordered and shipped as a separate line item from Acuity Brands Controls.

Accessories Ordered and shipped separately.

House Side Shield External Glare Shield External 360 Full Visor

RSX1HS RSX1 House side shield (includes 1 shield) RSX1HSAFRR U RSX1 House side shield for AFR rotated optics (includes 1 shield) RSX1EGS (FINISH) U External glares hield (specify finish) RSX1EGFV (FINISH) U External glare full visor (specify finish) RSXRPA (FINISH) U RSX Universal round pole adaptor plate (specify finish) RSXWBA (FINISH) U RSX WBA wall bracket (specify finish) 1

RSXSCB (FINISH) U RSX Surface conduit box (specify finish, for use with WBA, WBA not included) DLL127F 1.5 JU Photocell -SSL twist-lock (120-277V) 17

DLL347F 1.5 CUL JU Photocell -SSL twist-lock (347V) 17

DLL480F 1.5 CUL JU Photocell -SSL twist-lock (480V) 17

DSHORT SBK U Shorting cap 17

External Shields

Pole/Mounting Informatiion

HANDHOLE ORIENTATION

A Handhole

B

C

D

Accessories including bullhorns, cross arms and other adpaters are available under the accessories tab at Lithonia's Outdoor Poles and Arms product page.

Click here to visit Accessories.

RSX1 - Luminaire EPA

Fixture Quantity & Mounting Configuration Single 2 @ 90 2 @ 180 3 @ 90 3 @ 120 4 @ 90 2 Side by Side 3 Side by Side 4 Side by Side

Mounting Type Tilt

SPA - Square Pole Adaptor 0 °

0.57 1.03 1.05 1.52 1.36 2.03 1.31 1.7 2.26 RPA - Round Pole Adaptor 0.62 1.08 1.15 1.62 1.46 2.13 1.36 1.8 2.36 MA - Mast Arm Adaptor 0.49 0.95 0.89 1.36 1.2 1.87 1.23 1.54 2.1

IS - Integral Slipfitter AASP/AARP - Adjustable Arm Square/Round Pole

0 ° 0.57 1.03 1.05 1.52 1.36 2.03 1.31 1.7 2.26 10° 0.68 1.34 1.33 2 1.74 2.64 1.35 2.03 2.71 20° 0.87 1.71 1.73 2.56 2.26 3.42 1.75 2.62 3.49 30° 1.24 2.19 2.3 3.21 2.87 4.36 2.49 3.73 4.97 40° 1.81 2.68 2.98 3.85 3.68 5.30 3.62 5.43 7.24 45° 2.11 2.92 3.44 4.2 4.08 5.77 4.22 6.33 8.44 50° 2.31 3.17 3.72 4.52 4.44 6.26 4.62 6.94 9.25 60° 2.71 3.66 4.38 5.21 5.15 7.24 5.43 8.14 10.86 70° 2.78 3.98 4.54 5.67 5.47 7.91 5.52 8.27 11.03 80° 2.76 4.18 4.62 5.97 5.76 8.31 5.51 8.27 11.03 90° 2.73 4.25 4.64 6.11 5.91 8.47 5.45 8.18 10.97

*Includes luminaire and integral mounting arm. Other tenons, arms, brackets or other accessories are not included in this EPA data.Top of Pole

0.563”

2.650”

1.325” 0.400”

(2 PLCS)

Template #8

RSX POLE DRILLING

RSX STANDARD ARM & ADJUSTABLE ARM

5.25”

2.65”

Drilling Template Mounting Option Single 2 @ 180 2 @ 90 3 @ 120 3 @ 90 4 @ 90

Head Location Side B Side B & D Side B & C Round Pole Only Side B, C & D Side A, B, C & D

#8 Drill Nomenclature DM19AS DM28AS DM29AS DM32AS DM39AS DM49AS

Tenon O.D. RSX Mounting Single 2 at 180° 2 at 90° 3 at 120° 3 at 90° 4 at 90°

2 - 3/8" RPA, AARP AS3-5 190 AS3-5 280 AS3-5 290 AS3-5 320 AS3-5 390 AS3-5 490

2 - 7/8" RPA, AARP AST25-190 AST25-280 AST25-290 AST25-320 AST25-390 AST25-490

4" RPA, AARP AST35-190 AST35-280 AST35-290 AST35-320 AST35-390 AST35-490

Round Tenon Mount - Pole Top Slipfitters

Drill/Side Location by Configuration Type

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Performance Data

Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from 0-50°C (32-122°F).

Ambient Ambient Lumen Multiplier

0°C 32°F 1.05

5°C 41°F 1.04

10°C 50°F 1.03

15°C 59°F 1.02

20°C 68°F 1.01

25°C 77°F 1.00

30°C 86°F 0.99

35°C 95°F 0.98

40°C 104°F 0.97

45°C 113°F 0.96

50°C 122°F 0.95

Current (A)

Performance Package System Watts (W) 120V 208V 240V 277V 347V 480V P1 51W 0.42 0.25 0.21 0.19 0.14 0.11 P2 72W 0.60 0.35 0.30 0.26 0.21 0.15 P3 109W 0.91 0.52 0.45 0.39 0.31 0.23 P4 133W 1.11 0.64 0.55 0.48 0.38 0.27

Electrical Load

Values calculated according to IESNA TM-21-11 methodology and valid up to 40°C.

Operating Hours 50,000 75,000 100,000

Lumen Maintenance Factor >0.97 >0.95 >0.92

Projected LED Lumen Maintenance

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s RSX Area homepage. Photometric Diagrams

Isofootcandle plots for the RSX1 LED P4 40K. Distances are in units of mounting height (20’).

-4

-3

-2

-1

4 3 2 1 0 4321

-4

-3

-2

-1

4 3 2 1 0 4321

-4

-3

-2

-1

4 3 2 1 0 4321

-4

-3

-2

-1

4 3 2 1 0 4321

R3R3 R4R4 R5R5R2R2

LEGEND

0.1 fc

0.5 fc

1.0 fc

1.0 fc

-4

-3

-2

-1

4 3 2 1 0 4321

AFRAFR

-4

-3

-2

-1

4 3 2 1 0 4321

Visual - Template Tool

These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com .

Design Information Project Description

Monday, July 29, 2019 Name Company Phone Email

[ B ] - RSX2 LED P6 40K AFRL90

Manufacturer Lithonia Lighting Configuration Single Lamp Lumens 30752 Orientation Single Lamp Quantity 1 Mounting Height 30 Light Loss Factor 1 Arm Length 1 Input Power 246.6 Tilt 0 Max Illuminance 15 Area > 0.5fc 8044

Page 1 of 1Template Print

7/29/2019http://www.visual-3d.com/tools/template/Print.aspx?SessionID=3885952

AFRL90AFRL90

-4

-3

-2

-1

4 3 2 1 0 4321

Visual - Template Tool

These lighting calculation results are for general informational purposes only and are provided without warranty as to accuracy, completeness, reliability or otherwise. Results are based on user provided data and data provided from publicly available sources; actual field conditions may affect calculated output. Visit www.Visual-3D.com .

Design Information Project Description

Monday, July 29, 2019 Name Company Phone Email

[ A ] - RSX2 LED P6 40K AFRR90

Manufacturer Lithonia Lighting Configuration Single Lamp Lumens 30623 Orientation Single Lamp Quantity 1 Mounting Height 30 Light Loss Factor 1 Arm Length 1 Input Power 246.6 Tilt 0 Max Illuminance 14 Area > 0.5fc 8325

Page 1 of 1Template Print

7/29/2019http://www.visual-3d.com/tools/template/Print.aspx?SessionID=3885952

AFRR90AFRR90

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Performance Data

Performance Package System Watts

Distribution.

Type

30K

(3000K, 70 CRI)

40K

(4000K, 70 CRI)

50K

(5000K, 70 CRI)

Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW

P1 51W

R2 6,482 1 0 1 126 7,121 1 0 1 139 7,121 1 0 1 139 R3 6,459 1 0 2 127 7,096 1 0 2 139 7,096 1 0 2 139

R3S 6,631 1 0 1 129 7,286 1 0 2 142 7,286 1 0 2 142 R4 6,543 1 0 2 128 7,189 1 0 2 141 7,189 1 0 2 141

R4S 6,313 1 0 1 124 6,936 1 0 1 136 6,936 1 0 1 136 R5 6,631 3 0 2 130 7,286 3 0 2 143 7,286 3 0 2 143

R5S 6,807 3 0 1 133 7,479 3 0 1 147 7,479 3 0 1 147

AFR 6,473 1 0 1 127 7,112 1 0 1 139 7,112 1 0 1 139

AFRR90 6,535 2 0 2 127 7,179 2 0 2 140 7,179 2 0 2 140

AFRL90 6,562 2 0 1 128 7,210 2 0 2 140 7,210 2 0 2 140

P2 72W

R2 8,991 2 0 1 123 9,878 2 0 1 135 9,878 2 0 1 135 R3 8,959 2 0 2 124 9,843 2 0 2 137 9,843 2 0 2 137

R3S 9,198 2 0 2 126 10,106 2 0 2 139 10,106 2 0 2 139 R4 9,077 2 0 2 126 9,972 2 0 2 139 9,972 2 0 2 139

R4S 8,757 1 0 2 122 9,622 2 0 2 134 9,622 2 0 2 134 R5 9,198 4 0 2 128 10,106 4 0 2 140 10,106 4 0 2 140

R5S 9,443 3 0 1 131 10,374 3 0 1 144 10,374 3 0 1 144

AFR 8,979 2 0 1 125 9,865 2 0 1 137 9,865 2 0 1 137

AFRR90 9,064 3 0 2 124 9,959 3 0 2 137 9,959 3 0 2 137

AFRL90 9,102 3 0 2 125 10,001 3 0 2 137 10,001 3 0 2 137

P3 109W

R2 12,808 2 0 1 117 14,072 2 0 2 129 14,072 2 0 2 129 R3 12,763 2 0 2 117 14,023 2 0 2 129 14,023 2 0 2 129

R3S 13,104 2 0 2 120 14,397 2 0 2 132 14,397 2 0 2 132 R4 12,930 2 0 2 119 14,206 2 0 2 130 14,206 2 0 2 130

R4S 12,475 2 0 2 114 13,707 2 0 2 126 13,707 2 0 2 126 R5 13,104 4 0 2 120 14,397 4 0 2 132 14,397 4 0 2 132

R5S 13,452 3 0 2 123 14,779 3 0 2 136 14,779 3 0 2 136

AFR 12,791 2 0 1 117 14,053 2 0 2 129 14,053 2 0 2 129

AFRR90 12,913 3 0 3 118 14,187 3 0 3 130 14,187 3 0 3 130

AFRL90 12,967 3 0 2 118 14,247 3 0 3 130 14,247 3 0 3 130

P4 133W

R2 14,943 2 0 2 112 16,417 2 0 2 123 16,417 2 0 2 123 R3 14,890 2 0 3 112 16,360 2 0 3 123 16,360 2 0 3 123

R3S 15,287 2 0 2 115 16,796 2 0 2 126 16,796 2 0 2 126 R4 15,085 2 0 3 113 16,574 2 0 3 125 16,574 2 0 3 125

R4S 14,554 2 0 2 109 15,991 2 0 2 120 15,991 2 0 2 120 R5 15,287 4 0 2 115 16,796 4 0 2 126 16,796 4 0 2 126

R5S 15,693 4 0 2 118 17,242 4 0 2 130 17,242 4 0 2 130

AFR 14,923 2 0 2 112 16,395 2 0 2 123 16,395 2 0 2 123

AFRR90 15,065 3 0 3 113 16,551 3 0 3 124 16,551 3 0 3 124

AFRL90 15,128 3 0 3 114 16,621 3 0 3 125 16,621 3 0 3 125

Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here.

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Dimensions & Weights

L

W

H

Length: 22.8” (57.9 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 7.2” (18.4 cm) Arm

RSX1 with Round Pole Adapter (RPA)

Note: RPA — Round Pole mount can also be used to mount on square poles by omitting the round pole adapter plate shown here.

L

W

H

Length: 23.2” (59.1 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 3.5” (8.9 cm) Arm

RSX1 with Mast Arm Adapter (MA)

7/16" locking thru bolt/nut provided

L

W

H

Length: 20.7” (52.7 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 7.6” (19.3 cm) Arm

RSX1 with Adjustable Slipfitter (IS)

7/8" KO - fits 1/2" NPT water- tight fitting

Luminaire Weight by Mounting Type

Mounting Configuration Total Luminaire Weight SPA 22 lbs

RPA 24 lbs

MA 22 lbs

WBA 25 lbs

WBASC 28 lbs

IS 25 lbs

AASP 25 lbs

AARP 27 lbs

AAWB 28 lbs

AAWSC 31 lbs

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Dimensions

L

W H

Length: 23.6" (59.9 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 8.9” (22.6 cm) Arm

RSX1 with Wall Bracket (WBA)

Wall Bracket (WBA) Mounting Detail

4.5

7.0

L

W H

Length: 25.3” (64.3 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 9.2” (23.4 cm) Arm

RSX1 with Wall Bracket with Surface Conduit Box (WBASC)

3/4" NPT taps with plugs - Qty (4) provided

Surface Conduit Box (SCB) Mounting Detail 4.4

7.0

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Dimensions

L

W H

Length: 25.3” (65.3 cm) AASP 26.3” (66.8 cm) AARP Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 7.2” (18.2 cm) Arm

RSX1 with Adjustable Tilt Arm - Square or Round Pole (AASP or AARP)

NOTE:

RPA - Round Pole mount can also be used to mount on square poles by omitting the round pole adapter plate shown here.

7/8" KO - fits 1/2" NPT water- tight fitting

Notes AASP: Requires 3.0" min. square pole for 1 at 90°. Requires 3.5" min. square pole for mounting 2, 3, 4 at 90°.

AARP: Requires 3.2" min. dia. round pole for 2, 3, 4 at 90°. Requires 3.0" min. dia. round pole for mounting 1 at 90°, 2 at 180°, 3 at 120°.

L

W H

Length: 27.1” (68.8 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 8.9” (22.6 cm) Arm

RSX1 with Adjustable Tilt Arm with Wall Bracket (AAWB)

Wall Bracket (WBA) Mounting Detail

4.5

7.0

7/8" KO - fits 1/2" NPT water- tight fitting

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

Dimensions

L

W H

Length: 28.8” (73.2 cm) Width: 13.3” (33.8 cm) Height: 3.0” (7.6 cm) Main Body 9.2” (23.4 cm) Arm

RSX1 with Adjustable Tilt Arm with Wall Bracket and Surface Conduit Box (AAWSC)

Surface Conduit Box (SCB) Mounting Detail 4.4

7.0

3/4" NPT taps with plugs - Qty (4) provided

7/8" KO - fits 1/2" NPT water- tight fitting

Automotive Front Row - Rotated Optics (AFRL90/R90)

AFRR90 AFRL90

(Example: 2@180 - arrows indicate direction of light exiting the luminaire)

Lithonia RSX1 Area LED Rev. 06/27/23

COMMERCIAL OUTDOOR

FEATURES & SPECIFICATIONS

INTENDED USE

The RSX LED area family is designed to provide a long-lasting, energy-efficient solution for the one-for-one replacement of existing metal halide or high pressure sodium lighting. The RSX1 delivers 7,000 to 17,000 lumens and is ideal for replacing 70W to 400W HID pole-mounted luminaires in parking lots and other area lighting applications.

CONSTRUCTION

The RSX LED area luminaire features a rugged die-cast aluminum main body that uses heat-dissipating fins and flow-through venting to provide optimal thermal management that both enhances LED performance and extends component life. Integral “no drill” mounting arm allows the luminaire to be mounted on existing pole drillings, greatly reducing installation labor. The light engines and housing are sealed against moisture and environmental contaminants to IP66.

The low-profile design results in a low EPA, allowing pole optimization. All mountings are rated for minimum 1.5 G vibration load per ANSI C136.31. 3G Mountings: Include SPA, RPA, MA, IS, AASP, and AARP rated for 3G vibration. 1.5G Mountings: Include WBA, WBASC, AAWB and AAWSC rated for 1.5G vibration.

FINISH

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures superior adhesion as well as a minimum finish thickness of 3 mils. The result is a high-quality finish that is warrantied not to crack or peel.

COASTAL CONSTRUCTION (CCE)

ptional corrosion resistant construction is engineered with added corrosion rotection in materials and/or pre-treatment of base material under superÝurable paint. Provides additional corrosion protection for applications nearÜoastal areas. Finish is salt spray tested to over 5,000 hours per ASTM B117 with cribe rating of 10. Additional lead-times apply.

OPTICS

Precision acrylic refractive lenses are engineered for superior application efficiency, distributing the light to where it is needed most. Available in short and wide pattern distributions including Type 2, Type 3, Type 3S, Type 4, Type 4S, Type 5, Type 5S, AFR (Automotive Front Row), and AFR rotated AFRR90 and ARFL90.

ELECTRICAL

Light engine(s) configurations consist of high-efficacy LEDs mounted on metal-core circuit boards and aluminum heat sinks to maximize heat dissipation. Light engines are IP66 rated. LED lumen maintenance is >L92/100,000 hours. CCT’s of 3000K, 4000K and 5000K (minimum 70 CRI) are available. Fixtures ship standard with 0-10v dimming driver. Class 1 electronic drivers ensure system power factor >90% and THD <20%. Easily serviceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

STANDARD CONTROLS

The RSX LED area luminaire has a wide assortment of control options. Dusk to dawn controls include MVOLT and 347V button-type photocells and NEMA twist-lock photocell receptacles.

nLIGHT AIR CONTROLS The RSX LED area luminaire is also available with nLight® AIR for the ultimate in wireless control. This powerful controls platform provides out-of-the-box basic motion sensing with photocontrol functionality and is suitable for mounting heights up to 40 feet. No commissioning is required when using factory default settings that provide basic stand-alone motion occupancy dimming that is switched on and off with a built-in photocell. See chart above for motion sensor default out-of-box settings. For more advanced wireless functionality, such as group dimming, nLight AIR can be commissioned using a smartphone and the easy-to-use CLAIRITY app. nLight AIR equipped luminaries can be grouped, resulting in motion sensor and photocell group response without the need for additional equipment. Scheduled dimming with motion sensor over-ride can be achieved when used with the nLight Eclypse. Additional information about nLight Air can be found here.

INSTALLATION

Integral “no-drill” mounting arm allows for fast, easy mounting using existing pole drillings.

Select the “SPA” option for square poles and the “RPA” option to mount to round poles. Note, the RPA mount can also be used for mounting to square poles by omitting the RPA adapter plate. Select the “MA” option to attach the luminaire to a 2 3/8” horizontal mast arm or the “IS” option for an adjustable slipfitter that mounts on a 2 3/8” OD tenon. The adjustable slipfitter has an integral junction box and offers easy installation. Can be tilted up to 90° above horizontal. Additional mountings are available including a wall bracket, adjustable tilt arm for direct-to-pole and wall and a surface conduit box for wall mount applications.

LISTINGS

CSA Certified to meet U.S. and Canadian standards. Suitable for wet locations. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

International Dark-Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature only. U.S. Patent No. D882, 146S

BUY AMERICAN ACT

Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations.

Please refer to www.acuitybrands.com/buy-american for additional information.

WARRANTY

5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at:

www.acuitybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

nLight Control - Sensor Coverage and Settings

Motion Sensor Default Settings - Option PIRHN

Option

Dimmed State (unoccupied)

High Level (when occupied)

Photocell Operation

Dwell Time (occupancy time delay)

Ramp-up Time (from unoccupied to occupied)

Ramp-down Time (from occupied to unoccupied)

NLTAIR2 PIRHN Approx. 30% Output 100% Output Enabled @ 1.5FC 7.5 minutes 3 seconds 5 minutes nLight Sensor Coverage Pattern

NLTAIR2 PIRHN

Top Side

*Note: NLTAIR2 PIRHN default settings including photocell set-point, high/low dim rates, and occupancy sensor time delay are all configurable using the Clairity Pro App.

Sensor coverage pattern shown with luminaire at 0°. Sensor coverage pattern is affected when luminaire is titled.

Emergency Phone

FS MEDIA CONVERTER PRODUCT PORTFOLIO

Copyright © 2024 FS.COM AII Rights ReservedCopyright © 2024 FS.COM AII Rights Reserved Page 1 of 15

FS Media Converters

Product Portfolio

Copyright © 2024 FS.COM AII Rights Reserved Page 2 of 15

Contents

FS MEDIA CONVERTER PRODUCT PORTFOLIO

1. FS Media Converters 3

1.4 PoE Media Converters 7

1.5 Media Converter Chassis 8

1.1 Copper to Fiber Media Converters 3

1.2 Fiber to Fiber Media Converters 4

1.3 Industrial Media Converters 5

1.6 PoE Extenders 9

2. Product Functions 10

2.1 Indicator Light 10

2.2 DIP Switch 11

2.3 LFP 12

2.4 POE Power Supply 13

3. Common Troubleshooting Solutions 14

Copyright © 2024 FS.COM AII Rights Reserved Page 3 of 15

1. FS Media Converters

1.1 Copper to Fiber Media Converters

A copper to fiber media converter is a device used to convert data between electrical signals (using copper cables) and optical signals (using fiber optic cables). They are typically used when there is a need to extend the distance over which data can be transmitted, to isolate signals to reduce electromagnetic interference, to increase the bandwidth for data transmission, or for security. Media converters are usually small stand-alone devices, but are also available in modular designs integrated into switches. They can find applications in a variety of environments such as data centers, enterprise networks, schools, hospitals, and government agencies.

ID 96396 101472 101488 96397 101476

FS P/N UMC-GA1F1T UMC-1F1T PMC-1F1T UMC-GA1F2T UMC-1S1T

Image

Number and type of optical ports 1x 1000Base-X SFP 1x 100/1000Base-X SFP 1x 100/1000Base-X SFP 1x 100/1000Base-X SFP 1x 10GBase-X SFP+

Number and type of copper ports

1x 10/100/1000Base-T

RJ45

1x 10/100/1000Base-T

RJ45

1x 10/100/1000Base-T

RJ45

2x 10/100/1000Base-T

RJ45

1x 100M/1G/2.5G/5G/10GBa se-T RJ45

Wavelength / / / / /

Fiber Mode optical transceiver module optical transceiver module optical transceiver module optical transceiver module optical transceiver module

Operating Temperature 0 to 40°C 0 to 50°C 0 to 50°C 0 to 40°C 0 to 50°C

Input Power DC 5-12V 5V DC, 2A Max 52~56V DC, 0.58A DC 5-12V 5V DC, 2A Max

Storage Temperature -20 to 85°C -10 to 70°C -40 to 70°C -20 to 85°C -10 to 70°C

Copyright © 2024 FS.COM AII Rights Reserved Page 4 of 15

1.2Fiber-to-fiber media converter

ID 101464 141486 101484 131586 196057 204189

FS P/N UMC-1SC1T-MM UMC-1S1T-R PMC-1SC1T-SM UMC-GA1SC1T-MM UMC-GA1SC1T-SM-FX

UMC-GA1SC1T-SM-

FX

Image

Number and type of optical ports 1x 1000Base-X SC 1x 10GBase-X SFP+ 1x 1000Base-X SC

1x 100/1000Base-X

SC

1x 1000Base-X SC 1x 1000Base-X SC

Number and type of copper ports

1x 10/100/1000Base-T

RJ45

1x 100M/1G/2.5G/5G/10G

Base-T RJ45

1x 10/100/1000Base-T

RJ45

1x 10/100/1000Base-

T RJ45

1x 10/100/1000Base-T

RJ45

1x 10/100/1000Base-T

RJ45

Wavelength 850nm / 1310nm 850nm 1310/1550nm 1550/1310nm

Fiber Mode optical transceiver module optical transceiver module single mode multimode single mode single mode

Operating Temperature 0 to 50°C 0 to 50°C 0 to 50°C 0 to 50°C 0 to 50°C 0 to 50°C

Input Power 5V DC, 2A Max DC 5-12V 52~56V DC, 0.58A DC 5-12V DC 5-12V DC 5-12V

Storage Temperature -10 to 70°C -10 to 70°C -40 to 70°C -10 to 70°C -10 to 70°C -10 to 70°C

1.2 Fiber to Fiber Media Converters

A fiber-to-fiber media converter is a specialized network device that enables signal conversion between two different types of fiber optic links. Such a device is useful when dealing with singlemode to multimode fiber conversion, wavelength conversion (e.g., converting long wavelength (LX) signals to short wavelength (SX) signals), or data rate conversion. Fiber-to-fiber converters are also often used to improve network interference immunity, extend signaling distances, and adapt to different fiber optic network standards. Fiber-to-fiber media converters play a key role in many high-bandwidth-demanding, data-sensitive, and long-distance network architectures, especially in telco infrastructures, enterprise data centers, and large network environments.

UMC-2S

10Gigabit Fiber Media Converter

• 2x SFP/SFP+ Slots

• 100M/1.25G/8.5G/10G Transmission Speed

• Depend on Plug-in Fiber Tranceiver Transmission Distance

• DC 5-12V Input Power

• AC 100V-240V External Power

Copyright © 2024 FS.COM AII Rights Reserved Page 5 of 15

1.3 Industrial Media Converters

An industrial media converter is a network device designed to connect different network media, such as copper to fiber, in extreme or harsh environments. Unlike media converters used in commercial or office environments, industrial media converters typically have more ruggedized housings, a wide range of operating temperatures, and can handle higher levels of vibration, humidity, and electromagnetic interference. They are commonly found in manufacturing plants, power utilities, transportation systems, mining operations, and any outdoor or industrial environment that requires a stable network connection. When selecting a media converter for an industrial application, you should also consider the manufacturer's technical support and product quality assurance to ensure that the converter will work consistently over its expected lifecycle.

PIMC-2F2T

Gigabit PoE++ Ethernet Media Converter

• 2x 10/100/1000Base-T Ethernet RJ45

• 2x 100/1000Base-X Ethernet SFP

• Multimode 50/125μm or 62.5/125μm

• Singlemode 9/125μm

• DC 12-56V Input Power

IMC-2M2T

Gigabit Ethernet Media Converter

• 2x 10/100/1000Base-T Ethernet RJ45

• 2x 100/1000/2500Base-X Ethernet SFP

• Multimode 50/125μm or 62.5/125μm

• Singlemode 9/125μm

• DC 12~48V or AC 24V Input Power

IMC-1S1XMG

10Gigabit Ethernet Media Converter

• 1x 100M/1G/2.5G/5G/10GBase-T Ethernet RJ45

• 1x 10GBase-X Ethernet SFP+

• Multimode 50/125μm or 62.5/125μm

• Singlemode 9/125μm

• DC 12~48V or AC 24V Input Power

Copyright © 2024 FS.COM AII Rights Reserved Page 6 of 15

IMC-1F1T

Gigabit PoE+ Ethernet Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 100/1000Base-X SFP

• Multimode 50/125µm, 62.5/125µm

• Singlemode 9/125µm

• 12~48V DC, 3A Max/24V AC, 1.5A Max, 50~60H.

IMC-GA1SC1T-SM

Gigabit Ethernet Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 1000Base-X SC

• Singlemode 9/125µm

• DC 9-56V Input power

• AC 100V~240V External Power

IMC-GA1F1T

Gigabit Ethernet Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 1000Base-X SFP

• Multimode 50/125µm, 62.5/125µm

• Singlemode 9/125µm

• DC 9-56V Input power

• AC 100V~240V External Power

IMC-GA1SC1T-MM

Gigabit Ethernet Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 1000Base-X SC

• Multimode 50/125µm, 62.5/125µm

• DC 9-56V Input power

• AC 100V~240V External Power

Copyright © 2024 FS.COM AII Rights Reserved Page 7 of 15

1.4 PoE Media Converters

A PoE (Power over Ethernet) media converter is a special type of network device that allows non-PoE-compatible devices (e.g., webcams, wireless access points, IP phones, etc.) to receive both data signals and power over Ethernet cables.PoE technology simplifies the deployment of devices by eliminating the need for dedicated power cords, especially in places where wiring is difficult or power outlets are inconvenient.PoE media converters are ideal for deploying network devices in scenarios that lack convenient power access points or require long-distance transmission. PoE media converters are ideal for deploying network devices in scenarios where convenient power access points are lacking or where long distance transmission is required.

UMC-1F1T-PD

Gigabit Ethernet PoE+ PD Media Converter

• 1x 10/100/1000Base-T Ethernet RJ45

• 1x 100/1000Base-T Ethernet SFP

• Multimode 50/125μm or 62.5/125μm

• Singlemode 9/125μm

PMC-1F1T

Gigabit Ethernet PoE+ Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 100/1000Base-X SFP

• Multimode 50/125µm, 62.5/125µm

• Singlemode 9/125µm

• 52~56V DC, 0.58A Input Voltage

PMC-1SC1T-SM

Gigabit Ethernet PoE+ Media Converter

• 1x 10/100/1000Base-T RJ45

• 1x 1000Base-X SC

• Single-mode 9/125µm

• 52~56V DC, 0.58A Input Voltage

Copyright © 2024 FS.COM AII Rights Reserved Page 8 of 15

1.5 Media Converter Chassis

A media converter chassis, also known as a media converter rack or rack-mounted media converter system, is a device used for centralized management and power supply that is capable of housing multiple media converter modules. These chassis are capable of neatly mounting multiple converters in a centralized location, and typically support hot-swappable, which means that converter modules can be added or removed without interrupting power to the system. Using a media converter chassis is an effective way to build a scalable, highly available, and easy-to-manage network infrastructure, especially for data centers, large enterprise networks, or environments where a large number of converter devices need to be centrally managed.

MFMC-12DP

12 Slots Mini Media Converter Chassis

• AC 100V~240V, 1.5~3.0A, 50/60Hz Input Power

• DC 12V Per Slot, 5A Output Power

• 12 Number of Slots

MC-15SP

15 Slots Media Converter Chassis

• AC 100~240V, 3.3A, 50-60Hz Input Power

• DC 5V Per Slot,1A Output Power

• 15 Number of Slots

Copyright © 2024 FS.COM AII Rights Reserved Page 9 of 15

1.6 PoE Extenders

PoE Extenders are a very useful component in PoE deployments, especially when network connectivity needs to be provided in large facilities or in areas that are difficult to wire. With PoE extenders, users have the flexibility to distribute the network and power over a large physical area while maintaining the simplicity and cost-effectiveness of the network facility.

POEX1

Gigabit PoE+ Extender

• 1x 10/100/1000 Mbps PoE+ Copper Port (RJ-45)

• DC 48-56V Input Voltage

• DC 44-52V Output Voltage

• Up to 100m/500m with Daisy-chain Installation of 4 Units Data

Transmission Distance

POEX4

Gigabit PoE+ Extender

• 4x 10/100/1000 Mbps PoE+ Copper Port (RJ-45)

• DC 50-56V Input Voltage

• DC 50-55V Output Voltage

• Up to 100m Data Transmission Distance

IPOEX4

Gigabit PoE+ Extender

• 4x 10/100/1000 Mbps PoE+ Copper Port (RJ-45)

• DC 50-57V Input Voltage

• DC 45-55V Output Voltage

• Up to 100m Data Transmission Distance

Copyright © 2024 FS.COM AII Rights Reserved Page 10 of 15

2. Product Functions

2.1 Indicator Light

Fiber optic transceiver has 6 indicator lights (usually), each indicator light has a unique meaning, if the device is faulty, it is convenient for the staff to troubleshoot the problem.

The following is the general indicator working status, the actual product manual shall prevail, in addition, FX, FP refers to the optical port, TX, TP refers to the electrical port.

LED Indicators Function State Working conditions

PWR power indicator light on boot up light off shut down

FX / SD

TX / TP connection status indicator light on with signal input light off no signal input

Link / Act

TP / LNK

FX / LNK

connection status indicator light on connectivity flashing during data transmission light off no signal

FDX / COL electrical port operating mode indicator light on full duplex light off half-duplex

POE POE power supply indicator light on powering light off unplugged

Loop loop detection indicator light on open light off close

1000M electrical port signal indicator light on 1000M rate connectivity light off 10/100M rate adaptive

Copyright © 2024 FS.COM AII Rights Reserved Page 11 of 15

2.2 DIP Switch

DIP switches are hardware devices designed on fiber optic transceivers, some unmanaged fiber optic transceivers have 3 switches, some have 4 switches, and some have 8 switches.

The dip switches can be set by first disconnecting power to the transceiver and then adjusting the switch position. If set with power, the transceiver's internal integrated circuits must undergo a power-on reset through the power-down and power-up process for the setting to take effect.

No. 1 2 3 4 5

Function LFP ALS FX Reset FX 100/1000M Port-isolate mode

State OFF ON OFF ON OFF ON OFF ON OFF ON

Description disabling the LFP function turn on the LFP function turn off turn on turn off turn on gigabit gigabit adaptive turn on turn off

• Port isolation: isolation between ports in the same VLAN within Layer 2 that cannot transmit

• Optical port reset: when enabled, the power will be turned off automatically when the optical port is disconnected, waiting for restart

• Store-and-forward: received packets are put into the buffer and forwarded only when all are received

• Straight-through forwarding: Forward the data frame directly after knowing its destination MAC address.

• Semi-through forwarding: check the frame length, only the frames with at least 64B will be forwarded.

• Intelligent forwarding: Monitor the number of packets transmitted with errors in the network and automatically switch the forwarding mode.

• Jumbo frames: Extends the maximum Ethernet frame length to 9K, reducing the extra overhead of network devices in processing packet headers.

• 2544: Throughput, Latency, Packet Loss, Back-to-Back, System Recovery, Reset.

Copyright © 2024 FS.COM AII Rights Reserved Page 12 of 15

2.3 LFP

LFP, Link Fault Pass-through refers to the two communication devices (media converter, switches, routers, etc.)

to connect the transmission, a transceiver at one end of the link failure, then the fault will be transferred to the optical port, at the same time will let the other end of the reception of the knowledge, to be able to quickly locate the line faults, and to facilitate the maintenance and management.

Principle Schema

When the LEF failover function is turned on by the unmanaged fiber optic transceiver DIP dipswitch, if there is a link failure in the electrical port of the transceiver at the A end, this transceiver will transfer the failure of the electrical port to the optical port, and the A transceiver will stop the data transmission of the optical port; the transceiver at the B end will not be able to receive the data from the A transceiver, so it will know that the A transceiver has a link failure, and the B transceiver will stop the data transmission of both the optical port and the electrical port. B transceiver stops sending data from both optical and electrical ports, so the administrator can quickly find the problem line and easily solve the problem.

Copyright © 2024 FS.COM AII Rights Reserved Page 13 of 15

• Power over Ethernet interfaces support Power over Ethernet, and the interface shall comply with the PSE function specified in IEEE 802.3: 2018 to accomplish DC power delivery while transmitting data packets;

• The interfaces supporting Power over Ethernet shall comply with the provisions in the IEEE 802.3af: 2003 standard;

• The interfaces supporting Power over Ethernet shall conform to the provisions in the IEEE 802.3at: 2009 standard;

• The interface supporting Power over Ethernet shall comply with the provisions in the IEEE 802.3bt: 2018 standard;

2.4 POE Power Supply

DC power is delivered to the local devices through the network cable. In other words, the SFP interface receives and sends optical signals through optical fiber, and the RJ45 interface delivers electrical signals and power to remote IP cameras, wireless devices, and VoIP phones through network cables (POE-enabled PSDs), eliminating the labor and budgetary costs of installing separate power cables for the links.

Copyright © 2024 FS.COM AII Rights Reserved Page 14 of 15

1. The power indicator does not light up and the fiber optic transceiver cannot communicate

Solutions:

• Verify that the power cord is connected to the power connector on the back of the fiber optic transceiver.

• Check that the power outlet is energized by connecting other equipment to the power outlet.

• Check that the voltage of the power supply is within the normal range.

2. Link light does not come on

Solutions:

• Check the fiber optic line for breaks

• Check whether the fiber optic line has excessive loss and is out of range of the equipment.

• Check whether the fiber optic interface is connected correctly: the local TX is connected to the remote RX, and the remote TX is connected to the local RX.

• Check whether the fiber optic connector and the equipment interface are well connected; whether the jumper type matches the interface; whether the type of the equipment matches the fiber optic; whether the transmission length of the equipment matches the distance.

3. Frequently disconnected and underpowered

Solutions:

• May be too much attenuation for the optical path, at this time the optical power meter can be used to measure the optical power of the receiving end, if the receiving agility range around the 1-2dB range can be basically judged as a failure of the optical path.

• May be connected to the switch with the transceiver failure, this time the switch into a PC, that is, two transceivers directly connected to the PC, the two ends of the PING, such as the phenomenon does not appear when through when the phenomenon can be basically judged as a switch failure.

• May be transceiver failure, at this time the transceiver can be connected to both ends of the PC (not through the switch), both ends of the PING no problem, from one end to the other end of the transmission of a larger file (100M) or more, to observe its speed, such as the speed is very slow (200M or less than 15 minutes of file transmission), can be basically judged as a transceiver failure.

4. Heavy packet loss

Solutions:

• The electrical port of the transceiver does not match the duplex mode of the network device interface, or the device interfaces at both ends.

• Twisted-pair cable with RJ-45 header has a problem, carry out testing.

• Problems with the fiber optic connection. whether the jumper is aligned with the device interface. whether the pigtail matches the jumper and coupler type. etc.

3. Common Troubleshooting Solutions

Copyright © 2024 FS.COM AII Rights Reserved

Shenzhen (China)

Address: 24F, Yingfeng Center, Haitian 2nd Rd, Nanshan District, Shenzhen

Tel: +86 (755) 8357 1351

Email: sales@feisu.com

Wuhan (China)

Address: 9-14F, Optical Valley Software Park

A7, Guanshan Ave, Wuhan

Tel: +86 (027) 8808 9195

Email: sales@feisu.com

Delaware (United States)

Address: 380 Centerpoint Blvd, New Castle, DE 19720, United States

Tel: +1 (888) 468 7419

Email: us@fs.com

Birmingham (United Kingdom)

Address: Regus Edmund House, 12-22 Newhall

Street, Birmingham, B3 3AS

Tel: +49 (0) 8165 4099 260

Email: uk@fs.com

Munich (Germany)

Address: NOVA Gewerbepark Building 7, Am

Gfild 7,85375 Neufahrn bei Munich, Germany

Tel: +49 (0) 8165 4099 260

Email: de@fs.com

Melbourne (Australia)

Address: 57-59 Edison Rd, Dandenong South, VIC 3175, Australia

Tel: +61 3 9693 3488

Email: au@fs.com

Singapore

Address: 30A Kallang Pl, #11-10/11/12 Singapore

339213

Tel: +65 6443 7951

Email: sg@fs.com

Tokyo (Japan)

Address: JS Progress Building, 4-1-23 Heiwajima, Ota-ku, Tokyo 〒143-0006

Tel: 03-5826-8305

Email: jp@fs.com

FS has several offices around the world. Addresses, phone numbers are listed on the FS Website at https://www.fs.com/contact_us.html

FS and FS logo are trademarks or registered trademarks of FS in the U.S. and other countries.

Copyright © 2024 FS.COM AII Rights Reserved Page 15 of 15

California (United States)

Address: 15241 Don Julian Rd, City of Industry, CA 91745, United States

Tel: +1 (647) 243 6342

Email: us@fs.com

ETP-MTE ECO TOWERTM

THE ECO TOWERTM, MODEL ETP-MTE, COMBINES ECONOMY AND

ECOLOGY INTO ONE STYLISH PRODUCT. THE LIGHTWEIGHT

ALUMINUM CONSTRUCTION REDUCES ITS ECOLOGICAL FOOTPRINT

AND ALLOWS FOR ONE-PERSON INSTALLATION

FEATURES

n Light weight aluminum construction for reduced ecological footprint and one-person installation n Durable, multilayer powder coating achieves near-zero waste and VOC (volatile organic compound) emissions n Modular construction allows for easy upgrades n Optimal internal mounting plates and shelves provide clean mounting solutions for accessories n Call Station is illuminated at all times by an LED Panel Light n Vandal-resistant and designed to resist extreme weather conditions n A variety of signage, graphics and color choices are available n Easily mount any ETP-500 Series or VOIP-500 / VOIP-600 Series Call Station into the unit (sold separately) n ADA-compliant

E M

E R

G E

N C

Y P

H O

N E

M O

U N

T S

SP EC IFI C AT IO N S ETP-MTE - ECO TOWERTM

Emergency Phone Tower

ETP-MTE-W - Wireless/ Switched Power ECO TOWERTM Emergency Phone Tower

ETP-MTE-WP - Wireless ECO TOWERTM Emergency Phone Tower with Pole

Construction: 0.125 in. aluminum 0.125 in. aluminum 0.125 in. aluminum

Dimensions (WxDxH): 10.0 x 6.8 x 113.0 in. (254 x 171 x 2870 mm)

10.0 x 6.8 x 124.0 in. (254 x 171 x 3150 mm)

10.0 x 6.8 x 148.0 in. (254 x 171 x 3759 mm) including pole and Blue Light

Weight: 45 lbs. (20.4 kg) 50 lbs. (22.7 kg) 60 lbs. (27.2 kg)

Coating: High-gloss, multi-layer, corrosion-inhibitive system with resistance to UV-fade and graffiti protection

High-gloss, multi-layer, corrosion-inhibitive system with resistance to UV-fade and graffiti protection

High-gloss, multi-layer, corrosion-inhibitive system with resistance to UV-fade and graffiti protection

Colors: Blue and Red are standard.

Available in custom colors.

Blue and Red are standard.

Available in custom colors.

Blue and Red are standard.

Available in custom colors.

Signage: 3.25 in. high reflective white “EMERGENCY” lettering with wide-angle visibility is standard. .

Available in custom colors, .

lettering, and graphics.

3.25 in. high reflective white “EMERGENCY” lettering with wide-angle visibility is standard. .

Available in custom colors, .

lettering, and graphics.

3.25 in. high reflective white “EMERGENCY” lettering with wide-angle visibility is standard. .

Available in custom colors, .

lettering, and graphics.

Lighting: LED Blue Light: 209 lumens peak, 78 flashes per minute. 50,000 hour lifetime

LED Panel Light: Ultra bright LEDs, 50,000 hour lifetime

LED Blue Light: 209 lumens peak, 78 flashes per minute. 50,000 hour lifetime

LED Panel Light: Ultra bright LEDs, 50,000 hour lifetime

LED Blue Light: 209 lumens peak, 78 flashes per minute. 50,000 hour lifetime

LED Panel Light: Ultra bright LEDs, 50,000 hour lifetime

Power: 9 watts, 12-24VDC, 24/120VAC 9 watts, 12-24VDC, 24/120VAC 9 watts, 12-24VDC, 24/120VAC

Mounting: Mounts into concrete foundation using included hardware (shipped in advance). Mounting options available for pre-poured parking decks.

Mounts into concrete foundation using included hardware (shipped in advance). Mounting options available for pre-poured parking decks.

Mounts into concrete foundation using included hardware (shipped in advance). Mounting options available for pre-poured parking decks.

Operating Temperature: -40º F to +131º F (-40º C to +55º C) -40º F to +131º F (-40º C to +55º C) -40º F to +131º F (-40º C to +55º C)

Protection Rating: IP55, NEMA 3R IP55, NEMA 3R IP55, NEMA 3R

Limited Warranty: 2-year limited warranty 2-year limited warranty 2-year limited warranty

E T

P -M

T E

A

LT

E R

N A

T E

S

Approvals: ETL Recognized Component -- Conforms to UL Standards 60950-1 and 60950-22. Certified to CSA Standard C22.2 Nos. 60950-1 and 60950-22.

SP EC IFI C AT IO N S ETP-MTE-ARM - ECO TOWERTM

Camera Arm

ETP-MTE-72 - ECO TOWERTM

Emergency Phone Tower

Construction: 0.125 in. aluminum 0.125 in. aluminum

Dimensions (WxDxH): 10.0 x 13.5 x 43.4 in. (254 x 344 x 1101 mm) not including LED Blue Light

10.0 x 6.8 x 72.0 in. (254 x 171 x 1829 mm)

Weight: 18 lbs. (8.2 kg) - Arm 30 lbs. (13.6 kg)

Coating: High-gloss, multi-layer, corrosion-inhibitive system with resistance to UV-fade and graffiti protection

High-gloss, multi-layer,- corrosion-inhibitive system with resistance to UV-fade and graffiti protection

Colors: Blue and Red are standard. Available in custom colors. Blue and Red are standard. Available in custom colors.

Signage: N/A 3.25 in. high reflective white “EMERGENCY” lettering with wide-angle visibility is standard. Available in custom colors, lettering, and graphics.

Lighting: N/A LED Blue Light: 209 lumens peak, 78 flashes per minute. 50,000 hour lifetime

LED Panel Light: Ultra bright LEDs, 50,000 hour lifetime

Power: N/A 9 watts, 12-24VDC, 24/120VAC

Mounting: Camera mount has a 1.5” NPT adapter to mount a dome camera. Camera mount can be installed on any basic ECO TOWER emergency phone tower.

Mounts into concrete foundation using included hardware (shipped in advance). Mounting options available for pre-poured parking decks.

Operating Temperature: -40º F to +131º F (-40º C to +55º C) -40º F to +131º F (-40º C to +55º C)

Protection Rating: IP55, NEMA 3R IP55, NEMA 3R

Limited Warranty: 2-year limited warranty 2-year limited warranty

Approvals: ETL Recognized Component -- Conforms to UL Standards 60950-1 and

DIMENSIONAL DRAWING

7530 North Natchez Avenue Niles, Illinois 60714

Tel: 773-539-1100 Email: info@talkaphone.com Web: www.talkaphone.com

THE LEADERS IN SECURIT Y AND LIFE SAFET Y COMMUNICATIONS

All dimensions are in inches and are provided for reference only.

VOIP-500E

Dual Button Emergency Phone

Keypad Emergency Phone

Single Button Emergency Phone

VOIP-600E

VoIP

Single Button Assistance Phone

VOIP-500C VOIP-600H

VOIP-500EI VOIP-600EI

VOIP-500ECK VOIP-600ECK

Call Stations

ACCESSORIES

Parking Deck Mounting Kit: Order model ETP-

PDMK to mount on pre-poured parking deck.

Shelving: Order model ETP-MTE-SHELF to add an internal mounting shelf for accessories. Maximum two shelves per tower.

Mounting Panel: Order model ETP-MTE-PANEL to add an internal mounting panel for accessories.

Maximum two panels per tower.

10.00

FRONT VIEW

ISOMETRIC VIEW

5.81

4X 1.00

4.00

3.81

FOOT PRINT

CL

CL

6.75

106.00 112.90

SIDE VIEW

5.00

30.00

103.57

11.29

REAR VIEW

2.0 ADDED AERATORS 1/7/2014 K PATEL

1.0 SALES RELEASE 9/28/2012 K PATEL

0.1 PRELIMINARY RELEASE 09/20/2012 K PATEL

REV. DESCRIPTION DATE APPROVED

REVISIONS

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

ETP-MTE_ETP-400

SHEET 1 OF 1

09/20/2012

09/20/2012

09/20/2012K PATEL

J KAROL

K PATEL

2.0

SCALE: 1:16 WEIGHT:

REVPART NO.

C

SIZE

TALK-A-PHONE CO.

7530 N. NATCHEZ AVE. NILES, IL 60714

WWW.TALKAPHONE.COM

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

TALK-A-PHONE COMPANY. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

TALK-A-PHONE COMPANY IS PROHIBITED.

A

DWG. TITLE:

FINISH

DWG. NO.

ETP-MTE

10.00

FRONT VIEW

ISOMETRIC VIEW

5.81

4X 1.00

4.00

3.81

FOOT PRINT

CL

CL

6.75

106.00 112.90

SIDE VIEW

5.00

30.00

103.57

11.29

REAR VIEW

2.0 ADDED AERATORS 1/7/2014 K PATEL

1.0 SALES RELEASE 9/28/2012 K…