QMAE-CR-110003-N.pdf
PDF 820 KB Posted
- Solicitation number
- QMAE-CR-110003-N
- Issued by
-
GSA Federal Acquisition Service
About this file
Solicitation
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation No. QMAE-CR-110003-N
GSA Federal Acquisition
Service
August 11, 2011
Dear Prospective Offeror:
The General Services Administration (GSA) appreciates your interest in Solicitation QMAE-CR-110003-N for Electric medium duty trucks and medium and heavy duty trucks which operate on emerging technology
(including but not limited to electric, plug-in hybrid electric and hydrogen fuel cell vehicles). GSA
Automotive is currently soliciting for a long term contract for furnishing the subject units for use by all
Federal agencies throughout the United States. These vehicles will be acquired in accordance with Federal
Standards 794AE (medium duty trucks) and 807T(heavy duty trucks).
This acquisition is 100% Full and Open Competition which will result in one or more Firm-Fixed Price
Indefinite Delivery/Indefinite Quantity Contract(s), with economic price adjustment. Award(s) will be made on a Standard Item Number (SIN) by Standard Item Number (SIN) basis. Proposals will be evaluated and contract(s) awarded under the Lowest Price Technically Acceptable Approach to the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors.
In order to conduct this procurement most effectively, all notices and postings of this solicitation will be released via the Internet through the FedBizOpps site at: www.fbo.gov. Please be aware that the solicitation, questions and answers, comments, or any other information will not be disseminated in any other format. Be sure you check the web site regularly for any amendments. We suggest that you also bookmark GSA‘s
Automotive Acquisition Support Division‘s web site as it contains information of interest associated with
Automotive Programs: www.gsa.gov/automotive .The requested cut-off date for questions is August 29, 2011 at 5:00 PM, Eastern Time. Offerors are requested to submit questions for clarifications to
Ontheroad@gsa.gov with a carbon copy (CC) to Charles.Crowton@gsa.gov with subject line reading
QMAE-CR-110003-N. Responses to all questions will be in the form of an amendment to the solicitation posted on www.fbo.gov.GSA Automotive looks forward to receiving your proposal.
Sincerely, Charles R. Crowton
Contracting Officer
Federal Acquisition Service
GSA Central Office
Phone:(571)319-7480 Email:charles.crowton@gsa.gov http://www.gsa.gov/automotive mailto:Ontheroad@gsa.gov mailto:Gregory.Williams@gsa.gov
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
OFFEROR TO COMPLETE BLOCKS 17 & 30
1. REQUISITION NO.
2. CONTRACT NO.
3. AWARD/EFFECTIVE DATE
4. ORDER NO.
5.SOLICITATION NUMBER
QMAE-CR-110003-N
(i) Q F F A P B K N
6. SOLICITATION ISSUE DATE
08/11/2011
7. FOR SOLICITATION
a. NAME
Charles R. Crowton
b. TELEPHONE NO. (No collect calls)
(571)-319-7480
8. OFFER DUE DATE/LOCAL TIME
531E,561E,571E:
09/14/2011 2:00 p.m. Eastern Time
888E:
06/12/2012 2:00 p.m. Eastern Time
9. ISSUED BY CODE
QMAE 10. THIS ACQUISITION IS 11. DELIVERY FOR FOB 12. DISCOUNT TERMS
U.S. General Services Administration
Federal Acquisition Service
Automotive Acquisition Support Division
2200 Crystal Drive, Suite 1006
Arlington, VA 22202
UNRESTRICTED
SET ASIDE: % FOR
SMALL BUSINESS
DESTINATION UNLESS
BLOCK IS MARKED
SEE SCHEDULE
____% ____Days, Net 30 Days
SMALL DISADV.
BUSINESS
13a. THIS CONTRACT IS A RATED ORDER UNDER DPAS (15
CFR 700)
8(A) 13b. RATING
SIC: NAICS = 336211
SIZE STANDARD: 1000
14. METHOD OF SOLICITATION
RFQ IFB RFP
15. DELIVER TO CODE
16. ADMINISTERED BY CODE
To be shown on delivery orders issued under the contract SEE BLOCK 9
17a. CONTRACTOR/CODE
OFFEROR
FACILITY
CODE
18a. PAYMENT WILL BE MADE BY CODE
DUNS NUMBER: ___________ TIN NUMBER __________
TELEPHONE NO. ____________ FAX NO. ____________
General Services Administration
Financial Operations & Disbursement Branch (BCEB)
P.O. Box 419279
Kansas City, MO 64141
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN
OFFER
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED
SEE ADDENDUM
19.
ITEM NO.
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
IDIQ Type Contract – 1 Base Year w/ 4 Option Years
SIN(s) 531E, 561E, & 571E-
Electric medium duty trucks built in accordance with
Federal standard 794AE(Medium Duty) Dated 7/1/2011
888E-
Trucks operating on emerging technology built in accordance with Federal Standard 794(Medium Duty) or
Federal Standard 807 (Heavy Duty)
25. ACCOUNTING AND APPROPRIATION DATA
26. TOTAL AWARD AMOUNT (For Govt. Use Only)
27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED.
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED.
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 3__ COPIES TO ISSUING
OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR
OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE
TERMS AND CONDITIONS SPECIFIED HEREIN.
29. AWARD OF CONTRACT: REFERENCE __________OFFER DATED
____________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING
ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS
ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT)
30c. DATE SIGNED
31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT)
31c. DATE SIGNED
32a. QUANTITY IN COLUMN 21 HAS BEEN
ACCEPTED, AND CONFORMS TO THE
33. SHIP NUMBER
34. VOUCHER NUMBER
35. AMOUNT VERIFIED
CORRECT FOR
RECEIVED INSPECTED CONTRACT, EXCEPT AS NOTED PARTIAL FINAL
36. PAYMENT 37. CHECK NUMBER
32b. SIGNATURE OF AUTHORIZED GOVT REPRESENTATIVE 32c. DATE COMPLETE PARTIAL FINAL
38. S/R ACCOUNT NO.
39. S/R VOUCHER NO.
40. PAID BY
42a. RECEIVED BY (Print)
41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT
41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE 42b. RECEIVED AT (Location)
42c. DATE REC‘D (YY/MM/DD) 42d. TOTAL CONTAINERS
X
TABLE OF CONTENTS
PART I- THE SCHEDULE PAGE NO.
SECTION A : SOLICITATION/CONTRACT FORM 2
SECTION B: SUPPLIERS OR SERVICES AND PRICE/COSTS 8
SECTION C : DESCRIPTION/SPECIFICATIONS/
WORK STATEMENTS
SECTION D: PACKING AND MARKING 18
SECTION E: INSPECTION AND ACCEPTANCE 23
SECTION F: DELIVERIES OR PERFORMANCE 26
SECTION G: CONTRACT ADMINISTRATION DATA 34
SECTION H: SPECIAL CONTRACT REQUIREMENTS 37
PART II-CONTRACT CLAUSES
SECTION I: CONTRACT CLAUSES 38
PART III-LIST OF DOCUMENTS, EXHIBITS,
AND OTHER ATTACHMENTS
SECTION J: LIST OF ATTACHMENTS 70
PART IV-REPRESENTATIONS AND INSTRUCTIONS
SECTION K: REPRESENTATIONS,CERTIFICATIONS, AND
OTHER STATEMENTS OF OFFERORS OR RESPONDENTS
SECTION L: INSTRUCTIONS, CONDITIONS, AND
NOTICES TO OFFERORS OR RESPONDENTS
SECTION M: EVALUATION FACTORS FOR AWARD 111
SUPPLEMENTAL INFORMATION
A.1 A-FSS-2-A (OCT 1988)
FSC GROUP: 23
PRODUCT: Electric medium duty trucks built in accordance with Federal Standard 794AE and medium and heavy duty trucks which operate on emerging technology built in accordance with Federal Standard 794AE (medium duty) or Federal Standard
807T (heavy duty)
NAICS: 336211, Motor Vehicle Body Manufacturing
PERIOD:
Date of award on or before 2/29/2012:
Base Ordering Year is the date of award plus 365 days
Option Period 1 Ordering Year of the contract is 366 days through 730 days after contract award.
Option Period 2 Ordering Year the contract is 731 days through 1,095 days after contract award
Option Period 3 Ordering Year the contract is 1,096 days through 1,460 days after contract award
Option Period 4 Ordering Year the contract is 1,461 days through 1,826 days after contract award
(NOTE: the period of performance includes leap year dates of 2/29/2012 and 2/29/2016)
Date of award on or after 3/1/2012:
Base Ordering Year is the date of award plus 364 days
Option Period 1 Ordering Year of the contract is 365 days through 729 days after contract award.
Option Period 2 Ordering Year the contract is 730 days through 1,094 days after contract award
Option Period 3 Ordering Year the contract is 1,095 days through 1,460 days after contract award
Option Period 4 Ordering Year the contract is 1,461 days through 1,825 days after contract award
NOTE: The period of performance includes leap year date of 2/29/2016)
A.2 SUBMISSION OF PROPOSALS:
1) Standard Item Number (SIN)s: 531E,561E,& 571E.
Proposals for 531E, 561E, 571E must be received no later than September 14, 2011 at 2:00 p.m. Eastern Time.
Offerors shall submit hardcopy proposals to the following address:
U.S. GENERAL SERVICES ADMINISTRATION
Solicitation: QMAE-CR-110003-N
Solicitation Bid Room, Room 1065
301 7th Street, SW
Washington, DC 20407-0000
AUTOBID –Offerors are required to submit their proposed pricing information for these
SINs in GSAs AUTOBID no later than September 14, 2011 at 2:00 p.m. Eastern Time. All prospective Offerors are required to obtain a user name and password for GSAs secure on-line proposal application (AutoBid). User name and password may be obtained by submitting the solicitation number, company‗s name, DUNS number, address, business size, user's name, telephone number, fax, email and proposed make and models to automotiveedi.partnerships@gsa.gov. Account information will be provided within ten (10) business days of request. Also, offerors‘ AUTOBID entry shall be printed and submitted with its hardcopy pricing proposal (Volume 3)
Please see L.2 ADDENDUM TO 52.212-1 - INSTRUCTIONS TO OFFERORS—
COMMERCIAL ITEMS & Attachment H: AUTOBID Vendor Instructions for additional information.
2) 888E- MEDIUM AND HEAVY DUTY TRUCKS WHICH OPERATE ON
EMERGING TECHNOLOGY
Hardcopy Proposals for 888E MUST be received no later than JUNE 12, 2012 at 2:00 p.m.
Eastern Time.
If your hard copy proposal is submitted BEFORE: September 14, 2011 at 2:00 p.m. Eastern
Time it MUST be received at the following address:
U.S. GENERAL SERVICES ADMINISTRATION
Solicitation: QMAE-CR-110003-N
Solicitation Bid Room, Room 1065
Washington, DC 20407-0000
Hardcopy Proposals submitted between September 14, 2011 at 2:00 p.m. Eastern Time and
JUNE 12, 2012 at 2 P.M. Eastern Time MUST be received at the following address:
U.S. GENERAL SERVICES ADMINISTRATION
Automotive Acquisition Support Division
Solicitation: QMAE-CR-110003-N
Attention: Wanda Garnett, Contract Specialist
2200 Crystal Drive Suite 1006
Arlington, VA 22202
AUTOBID- Pricing information cannot be submitted in AutoBid for Item 888E. After each cut-off date, GSA's Engineering Division will review all hardcopy 888E proposals. Models found to meet the Federal Standard minimum requirements will be assigned a Standard item designation within the Federal Standards. Once this item number is assigned, your firm will be instructed to request a user name and password to obtain access and submit your proposed pricing information in Autobid.
NOTE: Pricing submitted in Autobid must match your firm‘s hardcopy proposal. Until a formal notice of award is issued, no communication by the Government, whether written or oral, shall be interpreted as a promise that an award will be made.
The Government will evaluate 888E proposals after each established cut-off dates listed below:
ST
DEADLINE FOR ITEM 888E – SEPTEMBER 14, 2011 at 2:00 p.m. Eastern Time.
2nd DEADLINE FOR ITEM 888E – DECEMBER 12, 2011 at 2:00 p.m. Eastern Time.
3rd DEADLINE FOR ITEM 888E – MARCH 12, 2012 at 2:00 p.m. Eastern Time.
th
DEADLINE FOR ITEM 888E – JUNE 12, 2012 at 2:00 p.m. Eastern Time.
Please see L.2 ADDENDUM TO 52.212-1 - INSTRUCTIONS TO OFFERORS—
COMMERCIAL ITEMS & Attachment H: AUTOBID Vendor Instructions for additional information.
A.3 CI-FSS-002 SUBMISSION OF OFFERS—ADDITIONAL INSTRUCTIONS (MAR
1996)
Offerors are requested to submit a signed original and two (2) copies (1 Paper and 1 Electronic) of the SF1449 together with all addenda and attachments complete in every respect with the exception of oversized blueprints, drawings, or similar documents attached to the solicitation. Oversized blueprints, drawings, or similar documents are not required to be duplicated for the purpose of submitting a duplicate copy of the offer to GSA.
A.4 ACKNOWLEDGMENT OF AMENDMENTS
Acknowledge all the amendments you have received from us by identifying the amendment number and its issue date below:
Amendment Number Date
(End of Provision)
A.5 CP-FSS-4-A SOLICITATION COPIES (MAR 1996)
In order to conduct this procurement most effectively and at the lowest costs, all information – including the solicitation, solicitation amendments, and any comments – will be posted only via the
Internet at: http://www.fbo.gov.
Offerors may download the solicitation and make hard copies of necessary items for submission.
For their own records, offerors are responsible for downloading and making complete copies of the solicitation, the terms of which are incorporated in the contract.
A.6 CP-FSS-20 SECURITY EXAMINATION OF HAND-DELIVERED OFFERS (JAN
1998)
Offerors are advised that an offer in response to this solicitation is subject to physical examination, x-ray, or other inspection prior to acceptance at the location designated for receipt of offers.
http://www.fbo.gov/
Inspection may be conducted by Government personnel or others acting on behalf of the
Government. Any offer received at the address designated for receipt of offers after the date and time specified elsewhere in this solicitation for receipt of offers shall be processed in accordance with the late offers provision of this solicitation.
For any hand delivered offer, whether delivered by the offeror or a courier service, the offeror must allow sufficient time to accommodate inspection by designated security personnel. To facilitate this security inspection, initial delivery to an alternate office shall be required prior to final delivery by the offeror to the address designated for receipt of offers. (CAUTION: Delivery to the security inspection point does not constitute timely delivery for receipt of offers.)
The office providing security inspection is located at the following address:
U.S. GENERAL SERVICES ADMINISTRATION
Security Desk
SOLICITATION NO. QMAE-CR-110003-N
Room 1065
Washington, DC 20407
A.7 CP-FSS-3 NOTICE: REQUESTS FOR EXPLANATION OR INFORMATION (MAR 1996)
Written requests for explanation or information regarding this solicitation should be directed to:
Ontheroad@gsa.gov with a carbon copy (CC) to Charles.Crowton@gsa.gov with subject line reading QMAE-CR-110003-N. The requested cut-off date for questions is August 29, 2011 at 5:00
P.M., Eastern Time.
A.8 CP-FSS-6 ELECTRONIC DATA INTERCHANGE (EDI) ORDERING (JAN 1994)
Offerors are advised that the Federal Supply Service is expanding use of electronic communications to exchange business documents. The Placement of Orders clause contained in this contract provides that orders may be placed using Electronic Data Interchange (EDI) procedures.
END OF SECTION
mailto:Ontheroad@gsa.gov mailto:Gregory.Williams@gsa.gov
SECTION B – SUPPLIES OR SERVICES AND PRICES/COSTS
B.1 CONTRACT LINE ITEMS.
Offerors may submit proposals one or more item numbers identified below. Offerors must meet the standards for each item number offered and follow the proposal submission instructions noted in
L.2 ADDENDUM TO 52.212-1 - INSTRUCTIONS TO OFFERORS—COMMERCIAL ITEMS.
1) STANDARD ITEM NUMBER(SIN) 531E:
4X2 STAKE, 18 FT, 21000-28000 LBS GVWR, ELECTRIC IN ACCORDANCE WITH
FEDERAL STANDARDS 794AE DATED JULY 1, 2011
Ordering year Estimated
Quantity
Unit Price
Total Price
Base
2 Make & Model Name:
Base vehicle price includes Consignee
Delivery F.O.B
Destination to any point located within the 48 contiguous States and the
District of Columbia.
Make & Model Name:
Base vehicle price includes
Consignee Delivery F.O.B
Destination to any point located within the 48 contiguous States and the
District of Columbia.
Option Period 1
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
Term of the Contract (Jun
2 PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 2
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
Term of the Contract (Jun
2 PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
INSPECTION: ORIGIN
ACCEPTANCE: ORIGIN
FOB POINT: DESTINATION
SHIP TO: SHIPMENT INFORMATION WILL BE IDENTIFIED ON THE INDIVIDUAL
DELIVERY ORDERS ISSUED.
531E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE OF OPTION YEARS)
THAT THE GOVERNMENT MAY ORDER FROM EACH AWARDEE OF THIS LINE ITEM IS
100 EACH.
OFFERORS SHALL ALSO FURNISH WITH THEIR PROPOSAL PRICING FOR ALL
AVAILABLE OPTIONAL EQUIPMENT FOR THE BASE YEAR
2) STANDARD ITEM NUMBER (SIN) 561E:
4X2 MAINTENANCE, 11 FT, 21000-28000 LBS GVWR, ELECTRIC IN ACCORDANCE
WITH FEDERAL STANDARDS 794AE DATED JULY 1, 2011
Option Period 3
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 4
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Ordering year Estimated includes Consignee
Delivery F.O.B
Destination to any point located within the 48 contiguous States and the
Consignee Delivery F.O.B
Destination to any point located within the 48
Option Period 1
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I &II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 2
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 3
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 4
If unilaterally exercised by the
Government in accordance with
2 PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
INSPECTION: ORIGIN
ACCEPTANCE: ORIGIN
FOB POINT: DESTINATION
SHIP TO: SHIPMENT INFORMATION WILL BE IDENTIFIED ON THE INDIVIDUAL
DELIVERY ORDERS ISSUED.
561E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE OF OPTION YEARS)
THAT THE GOVERNMENT MAY ORDER FROM EACH AWARDEE OF THIS LINE ITEM IS
100 EACH.
AVAILABLE OPTIONAL EQUIPMENT FOR THE BASE YEAR.
3) STANDARD ITEM NUMBER(SIN) 571E:
4X2 VAN, 20FT, 21000-28000 LBS GVWR, ELECTRIC IN ACCORDANCE WITH
FEDERAL STANDARDS 794AE DATED JULY 1, 2011
I-FSS-168 Option to Extend the
(AUG 2010) CLAUSE
Ordering year Estimated includes Consignee
Delivery F.O.B
Destination to any point located within the 48
Consignee Delivery F.O.B
Destination to any point located within the 48 contiguous States and the
District of Columbia.
Option Period 1
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
Term of the Contract (Jun
1996)
2 PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I &II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
INSPECTION: ORIGIN
ACCEPTANCE: ORIGIN
FOB POINT: DESTINATION
SHIP TO: SHIPMENT INFORMATION WILL BE IDENTIFIED ON THE INDIVIDUAL
DELIVERY ORDERS ISSUED.
571E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE OF OPTION YEARS)
THAT THE GOVERNMENT MAY ORDER FROM EACH AWARDEE OF THIS LINE ITEM IS
100 EACH.
4) ITEM NUMBER 888E:
Item 888E allows vendors to submit a proposal of any commercially made medium or heavy duty truck incorporating emerging technology for which there is an existing Federal Standard 794
(medium duty) or Federal Standard 807 (heavy duty) vehicle category. Public Law 112-10 defines emerging motor vehicle technology, as ―including but not limited to electric, plug-in hybrid electric, and hydrogen fuel cell vehicles‖
Option Period 2
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 3
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 4
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
GSA Engineering will determine if the proposed model meets Federal Standards 807 (heavy duty) or 794 (medium duty) and the line item designation of the offer. Models offered under 888E that do not include emerging technology or cannot be classified under the 794 or 807 Federal Standards will not be considered for award.
Ordering year Estimated
Unknown includes Consignee
Delivery F.O.B
Destination to any point located within the 48
Consignee Delivery F.O.B
Destination to any point located within the 48
Option Period 1
Government in accordance with
I-FSS-168 Option to Extend the
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I &II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 2
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
Option Period 3
If unilaterally exercised by the
Government in accordance with
I-FSS-168 Option to Extend the
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
INSPECTION: ORIGIN
ACCEPTANCE: ORIGIN
FOB POINT: DESTINATION
SHIP TO: SHIPMENT INFORMATION WILL BE IDENTIFIED ON THE INDIVIDUAL
DELIVERY ORDERS ISSUED.
888E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE OF OPTION YEARS)
THAT THE GOVERNMENT MAY ORDER FROM EACH AWARDEE OF THIS LINE ITEM IS
100 EACH.
B.2 PERIOD OF PERFORMANCE: The period of performance of the Indefinite
Delivery/Indefinite Quantity (ID/IQ) type contract(s) resulting for this solicitation is shown below:
Date of award on or before 2/29/2012:
Base Ordering Year is the date of award plus 365 days
Option Period 1 Ordering Year of the contract is 366 days through 730 days after contract award.
Option Period 2 Ordering Year the contract is 731 days through 1,095 days after contract award
Option Period 3 Ordering Year the contract is 1,096 days through 1,460 days after contract award
Option Period 4 Ordering Year the contract is 1,461 days through 1,826 days after contract award
(NOTE: the period of performance includes leap year dates of 2/29/2012 and 2/29/2016)
Date of award on or after 3/1/2012:
Base Ordering Year is the date of award plus 364 days
Option Period 1 Ordering Year of the contract is 365 days through 729 days after contract award.
Option Period 2 Ordering Year the contract is 730 days through 1,094 days after contract award
Option Period 3 Ordering Year the contract is 1,095 days through 1,460 days after contract award
Option Period 4 Ordering Year the contract is 1,461 days through 1,825 days after contract award
NOTE: The period of performance includes leap year date of 2/29/2016)
Option Period 4
Government in accordance with
I-FSS-168 Option to Extend the
ECONOMIC PRICE
ADJUSTMENT-
SPECIAL ORDER
PROGARM
CONTRACTS ALT I & II
(AUG 2010) CLAUSE
PRICE SUBJECT TO
ECONOMIC PRICE
ADJUSTMENT-SPECIAL
ORDER PROGARM
B.3 DELIVERABLES: During contact performance the following deliverables are also required:
Description Due NLT To
Weekly Status Report per F.13
Each Friday After Contract
Award automotiveedi.partnerships@gsa.gov
Shipment Delay
Requests per F.10
30 Days Prior to Shipping
Date
Evidence of Shipment
Manuals per F.2 Within 24 Hours of Shipping
Notification of Vehicle
Defects per F.3
Consignee with a copy to the
1611 for Each Export
Destination per F.17
30 Days in Advance of
Anticipated Sate of
Availability for Shipment
Transportation Office listed on
Delivery Order
Vendor Availability
Listing per F.16 As required
Status Report of
Orders and Shipments.
per F.14 seventh workday of the succeeding month
Administrative Contracting Officer
& Contracting Officer
The Contractor shall deliver via email one (1) electronic copy of each deliverable to the designated persons listed on the date it is due in the most current Microsoft Office, Word, PowerPoint, or
Project format, as appropriate, for the deliverables specified herein, whether verbally requested or not. Changes to delivery points of contact shall be issued to the Contractor by email notification. All deliverables shall be delivered no later than the date specified herein. Each deliverable is discussed in greater detail under SECTION F—DELIVERIES AND PERFORMANCE.
B.4 PRICING NOTES:
Base vehicle and optional equipment pricing for option years (if exercised by the
Government) are subject to the subsection I.15, Clause 552.216-71, Economic Price
Adjustment-Special Order Program Contract Alt I & II (Aug 2010).
Models identified for each standard item number are not all-inclusive of those that meet the
Federal Standards. Equivalent models that meet the minimum requirements may also be offered. If the comparable model differs from the Government‘s minimum requirements, the Offeror must identify those differences for each respective make and model in their proposal. Please note that the submission of representative makes and models does not ensure that they will be accepted.
mailto:automotiveedi.partnerships@gsa.gov
Ordering year estimates are not guaranteed. Each ordering year estimate, as well as each option year estimate, is a 12 month average monthly demand with program factors built in.
The guaranteed minimum quantity is one (1) vehicle. Please see subsection I.11 Guaranteed
Minimum Quantity regarding the terms and conditions applicable for the minimum amount of 1 vehicle.
For locations outside of the District of Columbia and the 48 contiguous States, subsection
F.17 export traffic release procedures will be followed. The only exception being if your firm makes option codes (CNSA,CNSG,CNSH,CNSP, DDRA,DDRG,DDRH, DDRP) available for customer agencies during order placement. Please see subsection F.6
Consignee Delivery Required for more information.
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C.1 SPECIFICATIONS
Attachment C contains the specifications and minimum standards for these Standard Item Numbers as identified in Federal Standard 794AE (medium) dated 7/1/2011 and Federal Standard 807T
(heavy) dated 7/1/2011 for this acquisition. Any exceptions you wish to request to the "standard" must be listed on the Technical Exceptions Worksheet, Attachment B, and submitted with your offer.
C.2 552.211-72 REFERENCES TO SPECIFICATIONS IN DRAWINGS (FEB 1996)
If military or other drawings are made a part of this contract, any reference in the drawings to
Federal Specifications or Standards will be considered to be a reference to the date of such Federal
Specification or Standard identified in the contract. If the date of the Federal Specification or
Standard is not identified in the contract, the edition, including revisions thereto, in effect on the date the solicitation is issued will apply.
C.3 PUBLIC LAW 94-163 (SECTION 510)
For purposes of Government conformance to the provisions of Public Law 94-163 (Section 510) and for no other purposes, offerors are required to furnish the following information for each vehicle type on which proposals are submitted: Make, Model, Engine cubic inch displacement, Carburetor type (Number of Barrels or Fuel Injection), and Transmission (Automatic or Manual).
This information must be identified to the applicable solicitation item number(s).
C.4 DESTINATION STATE INFORMATION
1) It is the responsibility of the contractor to provide a vehicle which meets the State requirements for the Destination State; as such the offeror must list any U.S. State vehicle standards
(if any) with which the proposed model does not comply. If the minimum requirements of GSA exceed the Destination State, the GSA requirements take precedence except in cases where the State requirements are specifically written and firm.
STANDARD LINE ITEM NO. U.S. STATE (N/A if not applicable)
SECTION D: PACKING AND MARKING
D.1 IDENTIFICATION OF VEHICLES
The contractor must show the applicable GSA Purchase Order number on the carrier‘s freight bill or other document used in the delivery of vehicles awarded f.o.b. destination under this solicitation.
This information is essential to the consignee for identification purposes. Vehicles will not be accepted by the Government without this identifying number. The Contractor‘s Monroney label is also acceptable, if it provides all of the required data.
D.2 552.211-91 DECALS, STICKERS, AND DATA PLATES (APR 1984)
Unless otherwise specified, caution plates/decals shall be conspicuously installed for all equipment requiring such notices. Vehicles for civil agencies shall be provided with the manufacturer's current warranty legend imprinted on decalcomania, and applied in a visible area of the engine compartment. In addition, a decal or sticker shall provide at least the following information: contract number; purchase order number; date of delivery, month and year; and the warranty time, in month and miles.
D.3 552.211-75 PRESERVATION, PACKAGING, AND PACKING (FEB 1996)
Unless otherwise specified, all items shall be preserved, packaged, and packed in accordance with normal commercial practices, as defined in the applicable commodity specification.
Packaging and packing shall comply with the requirements of the Uniform Freight
Classification and the National Motor Freight Classification (issue in effect at time of shipment) and each shipping container of each item in a shipment shall be of uniform size and content, except for residual quantities. Where special or unusual packing is specified in an order, but not specifically provided for by the contract, such packing details must be the subject of an agreement independently arrived at between the ordering agency and the
Contractor.
D.4 552.211-76 CHARGES FOR PACKAGING, PACKING, AND MARKING (JAN 2010)
If vehicles shipped to destination are not packaged, packed, and marked in accordance with applicable Federal Standards and contract requirements, the Government has the right, without prior notice to the Contractor, to perform the required repackaging/repacking/remarking, by contract or otherwise, and charge the Contractor therefore at the rate of $150.00 for the first hour. Each additional hour is $70.00. A minimum of 2 hours is required for each incident. The Contractor will also be charged for material costs, if incurred. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract.
D.5 552.211-77 PACKING LIST (FEB 1996)
(a) A packing list or other suitable shipping document shall accompany each shipment and shall indicate:
(1) Name and address of the consignor;
(2) Name and complete address of the consignee;
(3) Government order or requisition number;
(4) Government bill of lading number covering the shipment (if any); and
(5) Description of the material shipped, including item number, quantity, number of containers, and package number (if any).
(b) When payment will be made by Government commercial credit card, in addition to the information in (a) above, the packing list or shipping document shall include:
(1) Cardholder name and telephone number and
(2) The term ―Credit Card.‖
D.6 D-FSS-479 GSA FORM 1398 (AUG 1993)
The Contractor shall affix one copy of GSA Form 1398, GSA Purchased Vehicle, fully completed, to the right or left front door lock face or door post after final inspection is made.
All marks on windows and other labels (except labels cautioning against drained transmission, crankcase, and rear axle) shall be removed. Copies of GSA Form 1398 are available from the Contracting Officer.
NOTE TO OFFEROR: Data shown in the solicitation schedule of items may be utilized to satisfy the requirements for the following to be shown on GSA Form 1398:
(1) Receiving Agency--Examples are: State, USIA, Forest Service, GSA.
(2) Purchase Order No.--Use the five-digit "case" or "file" number.
D.7 552.211-85 CONSISTENT PACK AND PACKAGE REQUIREMENTS (JAN 2010)
The Contractor is advised that the Government will, where possible, order in full shipping containers and/or unitized loads. If volume warrants, the Government may also order in truckload or carload quantities provided such quantities do not exceed the maximum order limitation of this contract.
When the number of items per unit container, intermediate container and/or shipping container is not specified for an item, the offeror will state, in the spaces provided in the schedule of items, the number of items to be provided in each container. The quantities which are accepted at the time of award shall remain in effect throughout the term of the contract unless the Contracting Officer approves in writing a request by the Contractor to change the package quantities. Requests for changes shall be directed to the Contracting Officer or Administrative Contracting Officer, whichever is applicable.
(End of clause)
D.8 552.211-86 MAXIMUM WEIGHT PER SHIPPING CONTAINER (JAN 2010)
In no instance shall the weight of a shipping container and its contents exceed 23 kilograms (51 pounds), except when caused by—
(1) The weight of a single item within the shipping container;
(2) A prescribed quantity per pack for an item per shipping container; or
(3) A definite weight limitation set forth in the purchase description.
(End of clause)
D.9 552.211-87 EXPORT PACKING (JAN 2010)
(a) Offerors are requested to quote, in the pricelist accompanying their offer (or by separate attachment), additional charges or net prices covering delivery of the items furnished with commercial or military export packing. Military export packing, if offered, shall be in accordance with Mil-Std-2073-1 Level A or B as specified. If commercial export packing is offered, the offer or pricelist shall include detailed specifications describing the packing to be furnished at the price quoted.
(b) Ordering activities will not be obligated to utilize the Contractor‘s services for export packing accepted under this solicitation, and they may obtain such services elsewhere if desired.
However, the Contractor shall furnish items export packed when such packing is specified on the purchase order.
(End of clause)
D.10 552.211-88 VEHICLE EXPORT PREPARATION (JAN 2010)
Vehicles shall be prepared for export on wheels, unboxed, unless otherwise specified in the
Schedule of Items. All parts and equipment easily removable (subject to pilferage) shall be enclosed in a box substantially secured to the vehicle (inside body if feasible) in such a manner as to minimize the possibility of loss or damage while in transit to ultimate destination.
(End of clause)
D.11 552.211-89 NON-MANUFACTURED WOOD PACKAGING MATERIAL FOR EXPORT (JAN 2010)
(a) Definitions:
IPPC Country: Countries of the European Union (EU) or any other country endorsing the
International Plant Protection Convention (IPPC) ―Guidelines for Regulating Wood Packaging
Material in International Trade,‖ approved March 15, 2002. A listing of countries participating in the IPPC is found at http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml.
Non-manufactured wood, is also called solid wood and defined as wood packing other than that comprised wholly of wood-based products such as plywood, particle board, oriented strand board, veneer, wood wool, and similar materials, which has been created using glue, heat and pressure or a combination thereof.
http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml
Packaged material, and solid wood packing material (SWPM), for purposes of this clause, is defined as each separate and distinct material that by itself or in combination with other materials forms the container providing a means of protecting and handling a product. This includes, but is not limited to, pallets, dunnage, crating, packing blocks, drums, load boards, pallet collars, and skids.
(b) Non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries must be marked and properly treated in accordance with IPPC guidelines.
(c) This requirement applies whether the shipment is direct to the end user or through a
Government designated consolidation point. Packaging that does not conform to IPPC guidelines will be refused entry, destroyed or treated prior to entry.
(d) For Department of Defense distribution facilities or freight consolidation points, all non-manufactured wood pallets or packaging material with a probability of entering countries endorsing the IPPC Guidelines must be treated and marked in accordance with DLAD 47.305-1 (available at http://www.dla.mil/j-3/j-3311/DLAD/rev5.htm), and MIL-STD-2073-1, Standard Practice for
Military Packaging (and any future revision).
(e) Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and
MIL-STD-2073-1.
(f) Delays in delivery caused by non-complying pallets or wood package material will not be considered as beyond the control of the Contractor. Any applicable Government expense incurred as a result of the Contractor‘s failure to provide appropriate pallets or package material shall be reimbursed by the Contractor. Expenses may include the applicable cost for repackaging, handling and return shipping, or the destruction of solid wood packaging material.
(End of clause)
D.12 552.211-90 SMALL PARTS (JAN 2010)
All small parts required to be furnished with machines covered by contracts resulting from this solicitation shall be packed in envelopes, sealed, identified with part numbers and quantity on outside of envelopes. Larger parts must be individually tagged and identified with part number on face of tag.
(End of clause)
D.13 552.211-92 RADIO FREQUENCY IDENTIFICATION (RFID) USING PASSIVE TAGS (JAN 2010)
Radio Frequency Identification shall be required on all non-bulk shipments to the Defense
Logistics Agency (DLA) or Department of Defense (DoD) destinations. Shipments shall be tagged in accordance with 48 CFR clause 252.211-7006. Shipments to GSA Distribution Centers with final destinations to DLA and DoD shall be in compliance to 48 CFR 252.211-7006. Copies may be obtained from http://www.access.gpo.gov/nara/cfr/cfr-table-search.html.
(End of clause) http://www.dla.mil/j-3/j-3311/DLAD/rev5.htm http://www.access.gpo.gov/nara/cfr/cfr-table-search.html
D.14 552.211-93 UNIQUE ITEM IDENTIFICATION (UID) (JAN 2010)
Unique Item Identification shall be required on tangible personal property in accordance with
DFARS 211.274-4 as requested by the Defense Logistics Agency (DLA) or Department of Defense
(DOD). Item Property that falls within this criterion shall be valuated and identified in accordance with DFARS 252.211-7003. Details shall be found in DFARS 252.211-7007. Copies can be obtained from http://www.access.gpo.gov the 48 Code of Federal Regulations.
http://www.access.gpo.gov/
SECTION E-INSPECTION AND ACCEPTANCE
E.1 552.246-71 SOURCE INSPECTION BY GOVERNMENT (JUN 2009)
(a) Inspection by Government personnel.
(1) Supplies to be furnished under this contract will be inspected at source by the
Government before shipment from the manufacturing plant or other facility designated by the
Contractor, unless the Contractor is otherwise notified in writing by the Contracting Officer or a designated representative. Notwithstanding the foregoing, the Government may perform any or all tests contained in the contract specifications at a Government facility without prior written notice by the Contracting Officer before release of the supplies for shipment. Samples sent to a Government testing facility will be disposed of as follows: Samples from an accepted lot, not damaged in the testing process, will be returned promptly to the Contractor after completion of tests. Samples damaged in the testing process will be disposed of as requested by the Contractor. Samples from a rejected lot will be returned to the Contractor or disposed of in a time and manner agreeable to both the Contractor and the Government.
(2) Government inspection responsibility will be assigned to the GSA quality assurance office which has jurisdiction over the State in which the Contractor's or subcontractor's plant or other designated point for inspection is located. The Contractor shall notify or arrange for subcontractors to notify the designated GSA quality assurance office 7 workdays before the date when supplies will be ready for inspection. Shipment shall not be made until after inspection by the
Government is completed and shipment is authorized by the Government..
(b) Inspection and receiving reports. For each shipment, the Contractor shall be responsible for preparation and distribution of inspection documents as follows:
(1) DD Form 250, Material Inspection and Receiving Report, or computer formatted equivalent for deliveries to military agencies; or
(2) GSA Form 308, Notice of Inspection for deliveries to GSA or other civilian agencies.
When required, the Contractor will be furnished a supply of GSA Form 308 and/or DD Form 250, and complete instructions for their preparation and distribution.
(c) Inspection facilities.
(1) The inspection system required to be maintained by the Contractor in accordance with
FAR 52.246-2, Inspection of Supplies—Fixed Price, may be the Contractor's own facilities or any other facilities acceptable to the Government. These facilities shall be utilized to perform all inspections and tests of materials and components before incorporation into end articles, and for the inspection of such end articles before shipment. The Government reserves the right to evaluate the acceptability and effectiveness of the Contractor's inspection system before award and periodically during the contract period
(2) Offerors are required to specify, in the spaces provided elsewhere in the solicitation, the name and address of each manufacturing plant or other facility where supplies will be available for inspection, indicating the item number(s) to which each applies..
(3) The Contractor shall deliver the items specified in this contract from a plant or warehouse located within the United States (including Puerto Rico and the U.S. Virgin Islands) that is equipped to perform all inspections and tests required by this contract or specifications to evidence conformance therewith, or shall arrange with a testing laboratory or other facility in the
United States, acceptable to the Government, to perform the required inspections and tests
(d) Availability of records.
(1) In addition to any other requirement of this contract, the Contractor shall maintain records showing the following information for each order received under the contract:
(i) Order number;
(ii) Date order received by the Contractor;
(iii) Quantity ordered;
(iv) Date scheduled into production;
(v) Batch or lot number, if applicable;
(vi) Date inspected and/or tested;
(vii) Date available for shipment;
(viii) Date shipped or date service completed; and
(ix) National Stock Number (NSN), or if none is provided in the contract, the applicable item number or other contractual identification.
(2) These records should be maintained at the point of source inspection and shall be available to the Contracting Officer, or an authorized representative, for
(i) 3 years after final payment; or
(ii) 4 years from the end of the Contractor's fiscal year in which the record was created, whichever period expires first.
(e) Additional cost for inspection and testing. The Contractor will be charged for any additional cost for inspecting/testing or reinspection/ retesting supplies for the reasons stated in paragraph (e) of FAR 52.246-2, Inspection of Supplies--Fixed Price. When inspection or testing is performed by or under the direction of GSA, charges will be at the rate of $62.06* per man-hour or fraction thereof if the inspection is at a GSA distribution center; $62.06* per man-hour or fraction thereof, plus travel costs incurred, if the inspection is at any other location; and $62.06* per man-hour or fraction thereof for laboratory testing, except that when a testing facility other than a GSA laboratory performs all or part of the required tests, the Contractor shall be assessed the actual cost incurred by the Government as a result of testing at such facility. When inspection is performed by or under the direction of any agency other than GSA, the charges indicated above may be used, or the agency may assess the actual cost of performing the inspection and testing.
(f) Responsibility for rejected supplies. When the Contractor fails to remove or provide instructions for the removal of rejected supplies under FAR 52.246-2(h) pursuant to the Contracting
Officer's instructions, the Contractor shall be liable for all costs incurred by the Government in taking such measures as are expedient to avoid unnecessary loss to the Contractor. In addition to the remedies provided in FAR 52.246-2, supplies may be--
(1) Stored for the Contractor's account;
(2) Reshipped to the Contractor at its expense (any additional expense incurred by the
Government or the freight carrier caused by the refusal of the Contractor to accept their return also shall be for the Contractor's account); or
(3) Sold to the highest bidder on the open market and the proceeds applied against the accumulated storage and other costs, including the cost of the sale.
*The rates to be inserted are established by the Commissioner of the Federal Acquisition Service or a designee.
E.2 FIRST PRODUCTION VEHICLE INSPECTION
FPVI is required per item number, per inspection point, per contract.
When specified, the first vehicle produced under the contract shall be inspected by the contractor at his plant under the direction and in the presence of Government representatives. The purpose of the inspection shall be to determine vehicle conformance to the contract. Acceptance of the first production vehicle shall not constitute a waiver by the Government of its rights under the provisions of the contract. Failure of the first production vehicle to meet requirements of the contract shall be cause for the Government to refuse acceptance of all vehicles under contract until corrective action has been taken. Federal Standards 794AE & 807T identify all FPVI requirements.
SECTION F-DELIVERIES OR PERFORMANCE
F.1 I-FSS-880-A STATEMENT OF ORIGIN (APR 1984)
A manufacturer‘s statement of origin or bill of sale showing the applicable purchase order number is required for each vehicle procured under this specification. Unless otherwise specified, such documents shall be forwarded to the consignee mailing address.
F.2 H-FSS-582 EVIDENCE OF SHIPMENT OF MANUALS (OCT 1988)
The Contractor shall furnish the Contracting Officer and the cognizant Regional Contract
Management Division written evidence of shipment or mailing of Parts and Service Manuals required under this contract. This evidence shall consist of a copy of the transmittal letter (if used) or other written paper identifying the contract, agency and GSA case numbers; and shall show the manuals shipped, the addressee, date and method of shipment; and shall be forwarded as indicated above within 24 hours of the date of shipment or mailing. Such evidence need not be furnished for manuals shipped within the vehicles.
F.3 H-FSS-587 NOTIFICATION OF VEHICLE DEFECTS
For vehicles delivered under this contract, any notification of defects required by Public
Law 89-563 shall be addressed to the consignee unless the Contractor is otherwise notified pursuant to FPMR 101-26.501.
F.4 F-FSS-250 TIME OF SHIPMENT (FEB 1986)
Shipment is required to be made within 150 calendar days after receipt of order. Accelerated
Shipment is acceptable at no additional cost to the Government. Shipment shall not be made until after inspection by GSA‘s IOA is completed and shipment is authorized by the Government.
The Contractor shall notify or arrange for subcontractors to notify the designated GSA quality assurance office seven (7) workdays before the date when supplies will be ready for inspection.
Government inspection responsibility will be assigned to the GSA quality assurance office which has jurisdiction over the State in which the Contractor‘s or subcontractor‘s plant or other designated point for inspection is located.
F.5 F-FSS-706 COMMERCIAL DRIVEAWAY (APR 1984)
Unless otherwise specified under the items, driveaway delivery is acceptable; however, when driveaway is used, offerors shall not, on any movement, contemplate driving vehicles covered by this solicitation more than 50 miles on their own wheels, except by an approved bonded commercial driveaway common carrier. UNDER NO CIRCUMSTANCES SHALL
MOTOR VEHICLES PURCHASED UNDER THIS CONTRACT BE USED AT ANY
TIME (WHILE IN TRANSIT FROM SHIPPING POINT TO DESTINATION) TO
CARRY, TOW OR PUSH OTHER VEHICLES OR CARGO OF ANY KIND.
F.6 CONSIGNEE DELIVERY REQUIRED
Unless DEALER DELIVERY or EXPORT TRAFFIC RELEASE is required, all deliveries shall be made to the destination specified in the consignee address block on the delivery order.
CONSIGNE…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .