About this file

C-Federal Standards (Specifications)

View the file

Other files

File Type Posted
Attachment_J_-_Inspection_Points_Template.xls XLS spreadsheet
Amendment 002 QMAE-CR-110003-N Page 1.pdf PDF
QMAE-CR-110003-N Amendment 002 Pages 2-4.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 398 Heavy Duty Over the Road Touring Coach 06.24.2011.pdf PDF
QMAE-CR-110003-N Amendment 001 page 1.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 202C Type A School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 301C-304C Type A School Bus 06.24.2011.pdf PDF
Attachment c-Item 888E.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 259W-263W Medium Duty Shuttle Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 341N-347L Light Duty Shuttle Bus 06.24.2011.pdf PDF
Attachment_A_-_Proposal_Checklist.pdf PDF
Attachment C-DRAFT 2012 Fed Std 833F Bus Options Appendix A Specifications 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 398D Double Deck Touring Bus 06.24.2011.pdf PDF
Amendment 001 QMAE-CR-110003-N Pages 2-13.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 236A-238A Type D Rear Engine Work Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 320A-332A Types C and D Front Engine Work Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 220C-232C Types C and D Front Engine School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 390 Heavy Duty Intercity Commuter Coach 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 336C-338C Type D Rear Engine School Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 336A-338A Type D Rear Engine Work Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 236C-238C Type D Rear Engine School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 359W-363W Medium Duty Shuttle Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 220A-232A Types C and D Front Engine Work Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 241N-247 Light Duty Shuttle Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 320C-332C Types C and D Front Engine School Bus 06.24.2011.pdf PDF
Attachment_D_-_Weekly_Vendor_Status_Submission_Requirements.pdf PDF
Attachment C- 531E.pdf PDF
QMAE-CR-110003-N.pdf PDF
Attachment_D_-_Weekly_Status_Reports_EXAMPLE.xlsx XLSX spreadsheet
Attachment G-GSA 1678.pdf PDF
Attachment C-Item_888E.pdf PDF
Attachment_B_-_Technical_Exceptions_Worksheet.xlsx XLSX spreadsheet
Attachment_F_-_AutoChoice_Online_Ordering_Instructions.pdf PDF
Attachment_E_-_Small_Business_Subcontracting_Plan.pdf PDF
Attachment C-2012 Fed Std 794AE 7.1.11.pdf PDF
Attachment_I_-_Dealers_Layout.xlsx XLSX spreadsheet
Attachment H AUTOBID Vendor Instructions.pdf PDF
Attachment C-2012 Fed Std 807T 7.1.11.pdf PDF
Attachment_A_-_Proposal_Checklist.pdf PDF
Attachment C-571E.pdf PDF
2012 Fed Std 807T 7.1.11.pdf PDF
Item_888E.pdf PDF
AutoBid_Vendor_Instructions.pptx PPTX presentation
571E federal standard.pdf PDF
531E federal standard.pdf PDF
2012 Fed Std 794AE 7.1.11.pdf PDF
561E Federal Standard.pdf PDF
Show all 47

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Result for FAS Vehicle Standards Information year 2012

New Search

View THIS vehicle comments Add General comment Home Help

Results:

DocData There is 1 Associated Document for Federal Standard Number 794.

Click on the number to view the related documents.

Table

4X2 MAINTENANCE, 11 FT, 21000-28000 LBS GVWR, ELECTRIC

Add generic comment for 4X2 MAINTENANCE, 11 FT, 21000-28000 LBS GVWR, ELECTRIC

The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum requirements may also be offered.

4X2 MAINTENANCE TRUCK, 21000 - 28000 LBS GVWR, ELECTRIC

This vehicle shall comply with paragraphs 1 through 6 of federal vehicle standard 794 (Federal Standard requirements pertaining directly to Diesel Engines and associated componentsdo not apply to this All-Electric vehicle).

GENERAL CHASSIS REQUIREMENTS:

The vocational body truck specified shall utilize a current model year cab & chassis with all electric drive. This is an all electric truck with estimated range of 50-75 miles. The drive train is configured with a brushless motor and a battery pack.

There is an on-board 220V battery charger with an SAE J1772 charging coupler.

The contractor is fully responsible for the bumper to bumper warranty of this completed vehicle including, but not limited to, the chassis, drive-train, battery system and all modifications.

MAINTENANCE BODY REQUIREMENTS:

The Maintenance/Line body shall be furnished with an open (without roof), utility service body with and applicable equipment. Line bodies shall be manufacturer?scommercial model as represented in their current technical data and as requiredherein: The body and cabinetry shall be constructed of corrosion resistant 14 gage, A40 galvanneal minimum, or other material constructed with strength equal to steel. Units other than steel shall generally conform to the dimensional, layout, performance and the design specified herein, with the exception of basic body material used to accomplish the objectives (e.g. safety tread steel plate floor or equal, etc.). The body shall have a center load compartment with cabinetson each side. The body shall include but not be limited to, the body manufacturer?s furnished locks, latches, hinges, wiring harnesses, lights, all mounting hardware and components. Items normally furnished by the chassis manufacturer, such as but not limited to fuel system fill components, shall be used for integrating the body with the chassis. Body installers shall fully confirm to the bodyand chassis manufacturer?s instructions and recommendations.

MATERIAL AND DIMENSIONAL REQUIREMENTS

Center load compartment shall have a minimum width load space of 57 inches.

Load compartment floor (tread plate) thickness shall be minimum 7 gage (3/16 in.), safety tread steel plate. Vertical compartment height shall be minimum 45 in., maximum 50 in. Cabinet depth shall be not less than 18 inches. Floor understructure (cross sills) thickness shall be minimum 7 gage (3/16 in.)

Load space height shall be minimum 29 inches. Bulkhead shall be constructed to a minimum height of 27 inches above the load space floor and shall not beless than 14 gage galvanneal steel, reinforced for rigidity.

TAILGATE

Tailgate shall be constructed of not less than 14 gage, 0.0747 in. single panel galvanneal steel, reinforced for rigidity. Tailgate shall be hinged and equipped with supports for retention in horizontal position and when in the horizontal position shall be aligned flush or slightly lower than floor level.

Tailgate shall be minimum 12 in. high. Aluminum tailgates shall be double paneled construction from a minimum 0.080 in. material.

CABINET MATERIALS AND CONSTRUCTION

Cabinet headers shall be not less than 14 gage (0.0747 in.) galvanneal steel. Cabinetbacks and partitions shall be of not less than 16 gage, (0.0598 in.) galvannealsteel. Cabinet shelves shall be capable of supporting a minimum of 200 lbs. each when supported no more than 4 in. in from each end of the shelf. Cabinet doors shall be double panel constructed from not less than 20 gage (0.0359 in.) galvanneal steel with reinforcement. Aluminum and fiberglass body shall have cabinet material and construction of same material(s) as the rest of the body. Strength of finished cabinets shall be at least equal to that of steel construction.The cabinet interior shall be prepared and primed with a light colored gray finish, except that galvanized coated steel shelves need not be painted.

CABINETARRANGEMENT

The cabinet arrangement shall be as follows:

(A) 9 and 10 foot bodies One horizontal cabinet on each side of the body with at least a middle shelf of small bins with adjustable partitions. One full height vertical cabinet on each side of the body at the front with not less than two removable shelves each. One full height vertical cabinet on each side of the body, to the

Page 1 of 4Vehicle Standards

6/30/2011http://apps.fas.gsa.gov/vehiclestandards/template.cfm rear of the wheel housing, with one adjustable shelf each.

(B) 11 foot bodies One horizontal cabinet with at least a middle shelf of small bins with adjustable partitions, on each side of the body. Two full height vertical cabinets, on each side of the body at the front, with not less than two removable shelves each. One full height vertical cabinet to the rear of the wheel housing, on each side of thebody, with one adjustable shelf.

(C) 12 foot bodies One horizontal cabinet with at least a middle shelf of small bins with adjustable partitions, on each side of the body. Three full height vertical cabinets on each side of the body front with not less than two removable shelves each. One full height vertical cabinet on each side of the body, rear of the wheel housing, with one adjustable shelf each.

(D) 14 foot bodies One horizontal cabinet on each side of the body with at least a middle shelf of small bins and adjustable partitions. Three full height vertical cabinets on each side of the body front with not less than two removable shelves each. One full height vertical cabinet on each side of the body, to the rear of the wheel housing, with one adjustable shelf each.

CABINET DOORS

Cabinet door shall provide access to all portions of each cabinet, and door closures shall be weatherproof incorporating an automotive tubular type neoprene sealing system. Doors shall have full length continuous rod or hem type heavy-duty hinges, with stainless steel hinge pins or stainless steel, bronze, or nylon insert sockets. Latches shall have recessed handles. All doors shall be provided with cylinder type locks, operable from the same key but having various combinations of cylinder locks, as available, between vehicles on multi-unit contracts. Moving parts of latches and locks shall be constructed of, or plated with corrosion-resistant material. All vertical doors shall be furnished with double spring loaded stays to facilitate both hold open and closing, and doors shall not interfere with each other when open. Horizontal doors shall have two (2) removable pivoting supports to hold open in the 90-degree position and be reinforced so as to permit their use as a shelf. Latches and striker plates shall be non-welded, easily replaced and striker plates shall be readily adjustable. Fiberglass bodies shall be reinforced in the latch and hinge hardware areas.

REAR BUMPER

A heavy-duty step bumper shall be provided. A safety-tread steel plate step, integrated with the frame attached rear bumper, shall be furnished;

extending across the width of the body, having a step surface not less than 9 inchesdeep.

MANUFACTURING REQUIREMENTS:

1. The contractor shall employ configuration controlmethods to ensure that the completed vehicles, to include the after-market body,are configured the same, regardless of destination or location ofmanufacturer's facility(s).

2. The contractor shall furnish electric vehicleemergency responder information.

Item # 561E Item # 561E -- Optional Printable Page

GSA Components GSA Min Req M10056-115 NEWTON

Body/Chassis

MFG. MODEL CODE Newton D120

PAYLOAD lbs. 11,978

GROSS VEHICLE WEIGHT

RATING (min/max- lbs)

21000-28000 26,000

Cab to Axle

CAB TO AXLE, INCHES 173

Battery Drive System

Maintainable Speed per 3.2.5 50 MPH Comply

SAE J1772-2009 CHARGING

COUPLER

Comply

Engine Minimums

HORSEPOWER (min) HP / KW / Cooling 160/120/Liq

TORQUE (lb ft) 400 455

Battery Drive System

CHARGING LEVEL(S)

PROVISIONS

Level II Type II

Alternative Fuel

ELECTRIC BATTERY POWERED

VEHICLE

Battery KwH / Type / Cooling 80/LIP/Air

Front Axle

AXLE-FRONT-MIN 8,000 LBS

GAWR

9,259

Rear Axle

AXLE-REAR-SGL SP-MIN

18,078

Page 2 of 4Vehicle Standards

17,500 LBS GAWR

Electrical

CHARGER - ON BOARD

BATTERY

KW / Voltage 12kW/230v, 1P, 37AMPS

HORN(S) min Comply

Exterior

REAR VIEW MIRRORS comply

Doors and Windows

DOORS 2 Comply

WIPERS-WINDSHIELD-

INTERMITTENT

Comply

Lights and Lighting

DAYTIME RUNNING LIGHTS Comply

Interior

AIR CONDITIONING Comply

POWER STEERING Comply

Radio

AM/FM RADIO WITH COMPACT

DISC PLAYER

Comply

Seats

SEATING CAPACITY min. 2 Comply (3)

Safety

POWER ANTILOCK BRAKES,

FRONT AND REAR

Comply

RESTRAINT SYSTEM, ALL

SEATED POSITIONS

Comply

Tires and Wheels

HUB PILOTED WHEELS Steel Comply

TIRES 245/70 R17.5

Towing

FRONT TOW HOOKS Comply

Vendor Furnished Body Items

BODY LENGTH, 12 FT Comply (14)

BACK-UP ALARM Comply

ROLL-UP REAR DOOR Comply

BODY EXTERIOR DOT

LIGHTING, LED

Comply

Delivery

CONSIGNEE DELIVERY (NO

DEALER PREP)

Comply

Warranty

BATTERY PACK WARRANTY Years / Miles 3/36,000

OEM CORROSION WARRANTY Years / Miles 3/36,000

OEM POWERTRAIN WARRANTY Years / Miles 3/36,000

Page 3 of 4Vehicle Standards

Loading

OEM COMPREHENSIVE

WARRANTY

3/36000 3/36,000

CONTRACTOR

COMPREHENSIVE BODY

WARRANTY

1 /12000 3/36,000

S=Standard SA=Stand Alone PKG=Package(includes, requires or excludes other options) NA=Not Available

Federal Standard Number: 794

If you have any questions, feel free to email our web team at fas.insite@gsa.gov

Page 4 of 4Vehicle Standards

File details come from the government source that posted it. Updated .