About this file

G-GSA Form 1678 Status Report of Orders and Shipments

View the file

Other files

File Type Posted
Attachment_J_-_Inspection_Points_Template.xls XLS spreadsheet
Amendment 002 QMAE-CR-110003-N Page 1.pdf PDF
QMAE-CR-110003-N Amendment 002 Pages 2-4.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 398 Heavy Duty Over the Road Touring Coach 06.24.2011.pdf PDF
QMAE-CR-110003-N Amendment 001 page 1.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 202C Type A School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 301C-304C Type A School Bus 06.24.2011.pdf PDF
Attachment c-Item 888E.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 259W-263W Medium Duty Shuttle Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 341N-347L Light Duty Shuttle Bus 06.24.2011.pdf PDF
Attachment_A_-_Proposal_Checklist.pdf PDF
Attachment C-DRAFT 2012 Fed Std 833F Bus Options Appendix A Specifications 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 398D Double Deck Touring Bus 06.24.2011.pdf PDF
Amendment 001 QMAE-CR-110003-N Pages 2-13.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 236A-238A Type D Rear Engine Work Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 320A-332A Types C and D Front Engine Work Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 220C-232C Types C and D Front Engine School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Item 390 Heavy Duty Intercity Commuter Coach 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 336C-338C Type D Rear Engine School Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 336A-338A Type D Rear Engine Work Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 236C-238C Type D Rear Engine School Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 359W-363W Medium Duty Shuttle Bus 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 220A-232A Types C and D Front Engine Work Bus Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 241N-247 Light Duty Shuttle Basic 06.24.2011.pdf PDF
Attachment C-DRAFT Fed Std 833F Items 320C-332C Types C and D Front Engine School Bus 06.24.2011.pdf PDF
Attachment_D_-_Weekly_Vendor_Status_Submission_Requirements.pdf PDF
Attachment C- 531E.pdf PDF
Attachment C-561E.pdf PDF
QMAE-CR-110003-N.pdf PDF
Attachment_D_-_Weekly_Status_Reports_EXAMPLE.xlsx XLSX spreadsheet
Attachment C-Item_888E.pdf PDF
Attachment_B_-_Technical_Exceptions_Worksheet.xlsx XLSX spreadsheet
Attachment_F_-_AutoChoice_Online_Ordering_Instructions.pdf PDF
Attachment_E_-_Small_Business_Subcontracting_Plan.pdf PDF
Attachment C-2012 Fed Std 794AE 7.1.11.pdf PDF
Attachment_I_-_Dealers_Layout.xlsx XLSX spreadsheet
Attachment H AUTOBID Vendor Instructions.pdf PDF
Attachment C-2012 Fed Std 807T 7.1.11.pdf PDF
Attachment_A_-_Proposal_Checklist.pdf PDF
Attachment C-571E.pdf PDF
2012 Fed Std 807T 7.1.11.pdf PDF
Item_888E.pdf PDF
AutoBid_Vendor_Instructions.pptx PPTX presentation
571E federal standard.pdf PDF
531E federal standard.pdf PDF
2012 Fed Std 794AE 7.1.11.pdf PDF
561E Federal Standard.pdf PDF
Show all 47

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PAGEFORM APPROVED OMB NUMBERNOTE: This report is required in accordance with the terms of the contract and the instructions on the reverse of this form.

3090-0027 Expires: 02/29/2012 PAGES

OF

STATUS REPORT OF ORDERS AND SHIPMENTS

1. TO: 2. NAME OF CONTRACTOR 4. CONTRACT NUMBER

FROM: TO:

3. LOCATION OF PLANT 5. REPORT PERIOD COVERED

6. PURCHASE ORDER DATA 7. INSPECTION AND TESTING 8. DATE DUE FOR

SHIPMENT

DELIVERY AT

DESTINATION

9. SHIPMENT

DATE

SHIPPED

DATE

RELEASED FOR

SHIPMENT

DATE

OFFERED FOR

INSPECTION

DATE DUE

FOR

INSPECTION

DATE

RECEIVED

QUANTITY

AND UNIT

NATIONAL STOCK

NUMBERORDER NUMBER QUANTITY

SHIPPED

10. BALANCE

DUE

QUANTITY

SIGNATURE OF AUTHORIZED OFFICIAL TITLE DATE

GSA FORM 1678 (REV. 10-81)GENERAL SERVICES ADMINISTRATION

CERTIFICATION - The information reported above and on the attached sheets (if any) has been verified by the undersigned as accurate and complete for the period indicated in block 5.

(a) (b) (c) (d) (a) (b) (c) (a) (b)

GSA FORM 1678 BACK (REV. 10-81)

REMARKS

INSTRUCTIONS

I. GENERAL

II. SPECIFIC ENTRIES

A. A report period is from the first through the last day of a calendar month, notwithstanding that the ordering period applicable to a requirements contract may not coincide with these dates.

F. Columns 7(a) through 7(c). These columns apply only to contracts which include an "Availability for Inspection and Testing, and Shipment" (or Delivery) clause. Entries are not required in these columns if the contractor is authorized to ship the supplies under a Quality Approved Manufacturer Agreement.

G. Column 8. Insert date based on the time for shipment/delivery provisions of the contract, or in accordance with any authorized extensions of time for shipment or delivery.

H. Column 10. If a partial shipment is made, but the unshipped quantity is within the limitation of the "Variation in Quantity" clause of the contract, and if the contractor does not intend to include the unshipped quantity with a future shipment, insert a zero or "none".

I. Certification. The certification is required only on the first page of each monthly report.

(NOTE: If the contract includes a "Monthly Supply Potential" (MSP) clause and the contractor has exercised his option thereunder to extend the shipping/delivery time with respect to the acceptance of orders for quantities exceeding his MSP, entries in this column showing extended due dates shall be asterisked and briefly explained below in the space provided for remarks.)

B. Contractors shall report on each new order received during the report period, and each order shown in a preceding report as not completely shipped. If no orders are on hand during a report period, a negative report shall be submitted.

C. A separate report shall be submitted for each plant location.

D. Contractors shall continue to furnish reports after the expiration of the contract period until all shipments required under the contract have been made.

A. Block 1, Insert mailing address of the office assigned responsibility for the administration of the contract (unless preprinted).

B. Blocks 2, 4, and 5 are self-explanatory.

D. Insert page numbers in the spaces provided.

E. Columns 6(a) through 6(d) are self-explanatory.

C. Block 3, insert city and State. If the contractor has more than one plant in the same city, insert complete address.

PAGE

FORM APPROVED OMB NUMBER

NOTE: This report is required in accordance with the terms of the contract and the instructions on the reverse of this form.

3090-0027 Expires: 02/29/2012

PAGES

OF

STATUS REPORT OF ORDERS AND SHIPMENTS

1. TO:

2. NAME OF CONTRACTOR

4. CONTRACT NUMBER

FROM:

TO:

3. LOCATION OF PLANT

5. REPORT PERIOD COVERED

6. PURCHASE ORDER DATA

7. INSPECTION AND TESTING

8. DATE DUE FOR

SHIPMENT

DELIVERY AT

DESTINATION

9. SHIPMENT

DATE

SHIPPED

DATE

RELEASED FOR

SHIPMENT

DATE

OFFERED FOR

INSPECTION

DATE DUE

FOR

INSPECTION

DATE

RECEIVED

QUANTITY

AND UNIT

NATIONAL STOCK

NUMBER

ORDER NUMBER

QUANTITY

SHIPPED

10. BALANCE

DUE

QUANTITY

SIGNATURE OF AUTHORIZED OFFICIAL

TITLE

DATE

GSA FORM 1678 (REV. 10-81)

GENERAL SERVICES ADMINISTRATION

CERTIFICATION - The information reported above and on the attached sheets (if any) has been verified by the undersigned as accurate and complete for the period indicated in block 5.

(a) (b) (c) (d) (a) (b) (c) (a) (b)

GSA FORM 1678 BACK (REV. 10-81)

REMARKS

INSTRUCTIONS

I. GENERAL

II. SPECIFIC ENTRIES

A. A report period is from the first through the last day of a calendar month, notwithstanding that the ordering period applicable to a requirements contract may not coincide with these dates.

F. Columns 7(a) through 7(c). These columns apply only to contracts which include an "Availability for Inspection and Testing, and Shipment" (or Delivery) clause. Entries are not required in these columns if the contractor is authorized to ship the supplies under a Quality Approved Manufacturer Agreement.

G. Column 8. Insert date based on the time for shipment/delivery provisions of the contract, or in accordance with any authorized extensions of time for shipment or delivery.

H. Column 10. If a partial shipment is made, but the unshipped quantity is within the limitation of the "Variation in Quantity" clause of the contract, and if the contractor does not intend to include the unshipped quantity with a future shipment, insert a zero or "none".

I. Certification. The certification is required only on the first page of each monthly report.

(NOTE: If the contract includes a "Monthly Supply Potential" (MSP) clause and the contractor has exercised his option thereunder to extend the shipping/delivery time with respect to the acceptance of orders for quantities exceeding his MSP, entries in this column showing extended due dates shall be asterisked and briefly explained below in the space provided for remarks.)

B. Contractors shall report on each new order received during the report period, and each order shown in a preceding report as not completely shipped. If no orders are on hand during a report period, a negative report shall be submitted.

C. A separate report shall be submitted for each plant location.

D. Contractors shall continue to furnish reports after the expiration of the contract period until all shipments required under the contract have been made.

A. Block 1, Insert mailing address of the office assigned responsibility for the administration of the contract (unless preprinted).

B. Blocks 2, 4, and 5 are self-explanatory.

D. Insert page numbers in the spaces provided.

E. Columns 6(a) through 6(d) are self-explanatory.

C. Block 3, insert city and State. If the contractor has more than one plant in the same city, insert complete address.

8.2.1.4029.1.523496.503679

1. TO::
2. NAME OF CONTRACTOR:
3. LOCATION OF PLANT:
6. PURCHASE ORDER DATA. COLUMN B. NATIONAL STOCK NUMBER:
TITLE:
6. PURCHASE ORDER DATA. COLUMN C. QUANTITY AND UNIT:
4. CONTRACT NUMBER:
PAGE:
OF TOTAL PAGES:
5. REPORT PERIOD COVERED. FROM DATE. Enter 2 digit month, 2 digit day and 4 digit year.:
5. REPORT PERIOD COVERED. TO DATE. Enter 2 digit month, 2 digit day and 4 digit year.:
6. PURCHASE ORDER DATA. COLUMN D. DATE RECEIVED. Enter 2 digit month, 2 digit day and 4 digit year.:
7. INSPECTION AND TESTING. COLUMN A. DATE DUE FOR INSPECTION. Enter 2 digit month, 2 digit day and 4 digit year.:
7. INSPECTION AND TESTING. COLUMN B. DATE OFFERED FOR INSPECTION. Enter 2 digit month, 2 digit day and 4 digit year.:
7. INSPECTION AND TESTING. COLUMN C. DATE RELEASED FOR SHIPMENT. Enter 2 digit month, 2 digit day and 4 digit year.:
9. SHIPMENT. COLUMN A. DATE SHIPPED. Enter 2 digit month, 2 digit day and 4 digit year.:
DATE OF SIGNATURE. Enter 2 digit month, 2 digit day and 4 digit year.:
8. DATE DUE FOR. Enter 2 digit month, 2 digit day and 4 digit year.:
8. DATE DUE FOR SHIPMENT: 0
8. DATE DUE FOR DELIVERY AT DESTINATION: 0
9. SHIPMENT. COLUMN B. QUANTITY SHIPPED:
10. BALANCE DUE QUANTITY:
SIGNATURE OF AUTHORIZED OFFICIAL. DIGITAL SIGNATURE:
REMARKS:

File details come from the government source that posted it. Updated .