Amendment 001 QMAE-CR-110003-N Pages 2-13.pdf
PDF 53 KB Posted
- Solicitation number
- QMAE-CR-110003-N
- Issued by
-
GSA Federal Acquisition Service
About this file
Amendment 001 pages 2-13
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 2 OF 13
The purpose of this Amendment 001 to Solicitation QMAE-CR-110003-N is to make the following changes:
Attachments:
1) Attachment A-Proposal Checklist is revised to accommodate name changes of Volume II (TAB B&E) as detailed on pages 11 & 12 of this amendment.
2) Attachment C-Item 888E is changed from:
“SOLICITATION QMAE-CR-110003-N
ITEM 888E
MEDIUM AND HEAVY DUTY TRUCKS WHICH OPERATE ON
EMERGING TECHNOLOGY
Item 888E allows vendors to submit a proposal of any commercially made medium duty or heavy duty truck incorporating emerging technology for which there is an existing Federal Standard 794 (medium duty) or Federal Standard 807 (heavy duty) vehicle category. Public Law 112-10 defines emerging motor vehicle technology, as “including but not limited to electric, plug-in hybrid electric, and hydrogen fuel cell vehicles” GSA Engineering will determine if the proposed model meets Federal Standards 807 (heavy duty) or 794 (medium duty) and the line item designation of the offer. Models offered under 888E that do not include emerging technology or cannot be classified under the 794 or 807 Federal Standards will not be considered for award. award is issued, no communication by the Government, whether written or oral, shall be interpreted as a promise that an award will be made.”
Changed to: “SOLICITATION QMAE-CR-110003-N
ITEM 888E
Item #888E – MOTOR VEHICLE, COMMERCIAL, EMERGING
TECHNOLOGIES
Item 888E allows vendors to submit a proposal of any commercially made vehicle incorporating emerging technology for which there is an existing Federal Standard 833 (bus), 807 (heavy duty truck), and 794 (medium duty truck) vehicle category. To view these vehicle standards please view http://apps.fss.gsa.gov/vehiclestandards/. The list of vehicle types that may be offered under this solicitation’s 888E include but are not limited to: medium and heavy cab and chassis, medium and heavy dump trucks, medium and heavy refrigerated trucks, medium and heavy stake trucks, medium and heavy tractors, medium and heavy vans, school and adult work buses, wreckers and carriers, light-duty
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 3 OF 13 shuttle buses, medium-duty shuttle buses, intercity motor coach, heavy duty transit low floor buses, and other non-standard heavy vehicles.
Public Law 112-10 defines emerging motor vehicle technology, as "including but not limited to electric, plug-in hybrid electric, and hydrogen fuel cell vehicles" GSA Engineering will determine if the proposed vehicle meets all Federal Motor Vehicle requirements and the line item designation of the offer. Models offered under 888E which do not include emerging technology will not be considered for award.
For all other vehicles types please submit your 888E proposal under solicitation QMAA-F6-110004-N.
Including but are not limited to sedans, station wagons, wheelchair vehicles, police use vehicles, pick-up trucks, cab and chassis, sport utility vehicles, utility trucks, stake bed and dump trucks, passenger vans, cargo vans, ambulances, and other non-standard light vehicles Please look for solicitation QMAA-F6-110004-N on fbo.gov QMAA-F6-110004-N’s Primary Point of Contact:
Dallas W. Brewer, Contracting Officer dallas.brewer@gsa.gov Phone: (703) 605-2685 Secondary Point of Contact:
Joseph F. Continetti, Contract Specialist joseph.continetti@gsa.gov Phone: (703) 605-2763”
3) 833F bus standards are added under Attachment C Federal Standards (Specifications)
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 4 OF 13
Solicitation changes by section and page number
1) PAGE 1
Changed from: “These vehicles will be acquired in accordance with Federal Standards 794AE (medium duty trucks) and 807T (heavy duty trucks).” Changed to: “These vehicles will be acquired in accordance with Federal Standards 794AE (medium duty trucks), 833 F (bus), and 807T (heavy duty trucks).”
2) 1449 FORM-PAGE 2
Block 20. Schedule of Supplies/Services is changed from “IDIQ Type Contract – 1 Base Year w/ 4 Option Years SIN(s) 531E, 561E, & 571E- Electric medium duty trucks built in accordance with Federal standard 794AE(Medium Duty) Dated 7/1/2011 888E- Trucks operating on emerging technology built in accordance with Federal Standard 794(Medium Duty) or Federal Standard 807 (Heavy Duty)” Changed to: “See Schedule”
SUPPLEMENTAL INFORMATION
3) PAGE 4
A.1 A-FSS-2A (Oct 1988) is changed from “Electric medium duty trucks built in accordance with Federal Standard 794AE and medium and heavy duty trucks which operate on emerging technology built in accordance with Federal Standard 794AE (medium duty) or Federal Standard 807T (heavy duty)” changed to: “Electric medium duty trucks built in accordance with Federal Standard 794AE and Item #888E – MOTOR VEHICLE, COMMERCIAL, EMERGING
TECHNOLOGIES”
4) PAGE 5
A.2 SUBMISSION OF PROPOSALS:
Change from: “2) 888E- MEDIUM AND HEAVY DUTY TRUCKS WHICH
OPERATE ON EMERGING TECHNOLOGY”
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 5 OF 13 Change to: “2) ITEM 888E – MOTOR VEHICLE, COMMERCIAL, EMERGING
TECHNOLOGIES ”
AUTOBID- changed from “Models found to meet the Federal Standard minimum requirements will be assigned a Standard item designation within the Federal Standards” changed to:
“GSA Engineering will determine if the proposed vehicle meets all Federal Motor Vehicle requirements and the line item designation of the offer.”
SECTION B-SUPPLIES OR SERVICES AND PRICES/COSTS
5) PAGES 12-13
B.1 CONTRACT LINE ITEMS
4) ITEM NUMBER 888E:
Changed from: “Item 888E allows vendors to submit a proposal of any commercially made medium or heavy duty truck incorporating emerging technology for which there is an existing Federal Standard 794 (medium duty) or Federal Standard 807 (heavy duty) vehicle category. Public Law 112-10 defines emerging motor vehicle technology, as “including but not limited to electric, plug-in hybrid electric, and hydrogen fuel cell vehicles” GSA Engineering will determine if the proposed model meets Federal Standards 807 (heavy duty) or 794 (medium duty) and the line item designation of the offer. Models offered under 888E that do not include emerging technology or cannot be classified under the 794 or 807 Federal Standards will not be considered for award.”
Changed to:
“ Item 888E allows vendors to submit a proposal of any commercially made vehicle incorporating emerging technology for which there is an existing Federal Standard 833 (bus), 807 (heavy duty truck), and 794 (medium duty truck) vehicle category. To view these vehicle standards please view http://apps.fss.gsa.gov/vehiclestandards/. The list of vehicle types that may be offered under this solicitation’s 888E include but are not limited to: medium and heavy cab and chassis, medium and heavy dump trucks, medium and heavy refrigerated trucks, medium and heavy stake trucks, medium and heavy tractors, medium and heavy vans, school and adult work buses, wreckers and carriers, light-duty shuttle buses, medium-duty shuttle buses, intercity motor coach, heavy duty transit low floor buses, and other non-standard heavy vehicles.
Public Law 112-10 defines emerging motor vehicle technology, as "including but not limited to electric, plug-in hybrid electric, and hydrogen fuel cell vehicles" GSA Engineering will determine if the proposed vehicle meets all Federal Motor Vehicle requirements and the line item designation of the offer. Models offered under 888E which do not include emerging technology will not be considered for award.
For all other vehicles types please submit your 888E proposal under solicitation QMAA-F6-110004-N.
Including but are not limited to sedans, station wagons, wheelchair vehicles, police use vehicles, pick-up trucks, cab and chassis, sport utility vehicles, utility trucks, stake bed
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 6 OF 13 and dump trucks, passenger vans, cargo vans, ambulances, and other non-standard light vehicles Please look for solicitation QMAA-F6-110004-N on fbo.gov QMAA-F6-110004-N’s Primary Point of Contact:
Dallas W. Brewer, Contracting Officer dallas.brewer@gsa.gov Phone: (703) 605-2685 Secondary Point of Contact:
Joseph F. Continetti, Contract Specialist joseph.continetti@gsa.gov Phone: (703) 605-2763”
6) PAGE 14
Changed from “888E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE
OF OPTION YEARS) THAT THE GOVERNMENT MAY ORDER FROM EACH
AWARDEE OF THIS LINE ITEM IS 100 EACH.’
Changed to: “888E: THE FIVE (5) YEAR MAXIMUM QUANTITY (INCLUSIVE OF
OPTION YEARS) THAT THE GOVERNMENT MAY ORDER FROM EACH
AWARDEE OF AN ASSIGNED STANDARD ITEM NUMBER IS 100 EACH.”
7) PAGE 15
The Deliverable chart listed in B.3 is revised to incorporate Delivery Orders for Destinations Not on the Dealer’s Layout requirement as follows:
Description Due NLT To
Weekly Status Report per F.13
Each Friday After Contract Award automotiveedi.partnerships@gsa.gov
Shipment Delay Requests per F.10
30 Days Prior to Shipping Date
Contracting Officer
Evidence of Shipment Manuals per F.2
Within 24 Hours of Shipping
Contracting Officer
Notification of Vehicle Defects per F.3
30 Days Prior to Shipping Consignee with a copy to the Contracting Officer
1611 for Each Export Destination
30 Days in Advance of Anticipated Sate of
Transportation Office listed on Delivery Order
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 7 OF 13 per F.17 Availability for Shipment
Vendor Availability Listing per F.16
As required Contracting Officer
Status Report of Orders and Shipments.
Per F.14 seventh workday of the succeeding month
Administrative Contracting Officer & Contracting Officer
Delivery Orders for Destinations Not on the Dealer’s Layout (only applicable for orders received with DDR option code)
Every two weeks Contracting Officer
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
8) PAGE 17
C.1 SPECIFICATIONS
Changed from “Attachment C contains the specifications and minimum standards for these Standard Item Numbers as identified in Federal Standard 794AE (medium) dated 7/1/2011 and Federal Standard 807T (heavy) dated 7/1/2011 for this acquisition. Any exceptions you wish to request to the "standard" must be listed on the Technical Exceptions Worksheet, Attachment B, and submitted with your offer.’
Changed to “Attachment C contains the specifications and minimum standards for these Standard Item Numbers as identified in Federal Standard 794AE (medium) dated 7/1/2011, Federal Standard 833F (bus), and Federal Standard 807T (heavy) dated 7/1/2011 for this acquisition. In addition these vehicle standards are available at http://apps.fss.gsa.gov/vehiclestandards/.
Any exceptions you wish to request to the "standard" must be listed on the Technical Exceptions Worksheet, Attachment B, and submitted with your offer.
Please note: Revisions and/or updates to the Federal Standards will be incorporated during the contract’s period of performance.”
Add C.5 BUS INFORMATION to Section C at bottom of page 17.
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 8 OF 13
C.5 BUS INFORMATION
DOD (Department of Defense) customers may only place delivery orders for buses (chassis and body) manufactured in the United States or Canada. DOD customers are subject to 225.7004 (10 U.S.C. 2534) specifically prohibits the expenditure of DoD appropriations for the acquisition of buses, for use by the United States Armed Forces, from foreign sources. GSA Automotive requires the following information for all bus models offered for our DOD customers before order placement.
The offeror represents that each bus make and model proposed [_] is, [_] is not compliant with Department of Defense (DoD) regulation 225.7004 (10 U.S.C. 2534) if not applicable please write in N/A) Information should also be submitted under Volume II (TAB E)-Customer Information
SECTION E-INSPECTION AND ACCEPTANCE
9) PAGE 25
E.2 FIRST PRODUCTION VEHICLE INSPECTION
Changed from “Federal Standards 794AE & 807T identify all FPVI requirements” Changed to “Federal Standards 794AE, 807T, & 833F identify all FPVI requirements”
SECTION F-DELIVERIES OR PERFORMANCE
10) PAGE 26
F.4 F-FSS-250 TIME OF SHIPMENT (FEB 1986)
Is changed from “F.4 F-FSS-250 TIME OF SHIPMENT (FEB 1986) Shipment is required to be made within 150 calendar days after receipt of order.
Accelerated Shipment is acceptable at no additional cost to the Government. Shipment shall not be made until after inspection by GSA‘s IOA is completed and shipment is authorized by the Government. The Contractor shall notify or arrange for subcontractors to notify the designated GSA quality assurance office seven (7) workdays before the date when supplies will be ready for inspection. Government inspection responsibility will be assigned to the GSA quality assurance office which has jurisdiction over the State in which the Contractor‘s or subcontractor‘s plant or other designated point for inspection is located.”
Changed to “F.4 F-FSS-250 TIME OF SHIPMENT (FEB 1986) Shipment is required to be made within 120-365 calendar days after receipt of order depending on make and model offered and if first production vehicle is required.
Accelerated Shipment is acceptable at no additional cost to the Government. Shipment
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 9 OF 13 shall not be made until after inspection by GSA‘s IOA is completed and shipment is authorized by the Government. The Contractor shall notify or arrange for subcontractors to notify the designated GSA quality assurance office seven (7) workdays before the date when supplies will be ready for inspection. Government inspection responsibility will be assigned to the GSA quality assurance office which has jurisdiction over the State in which the Contractor‘s or subcontractor‘s plant or other designated point for inspection is located.
Contractor proposed delivery schedule (fill-in for each model offered):
If FPVI (First Production Vehicle Inspection) is required, First production vehicle shipment will be made ___ days after date of receipt of delivery order; and all remaining vehicles under that delivery order will be shipped ___days after date of receipt of delivery order.
If FPVI is not required shipment will be made ___ days after date of receipt of delivery order”
11) PAGE 28
Revise F.6 CONSIGNEE DELIVERY REQUIRED
Changed from “All vehicles shall receive the manufacturer‘s suggested complete predelivery service. The vehicle shall be processed for shipment from the manufacturer‘s plant to the initial receiving activity, in accordance with the manufacturer‘s standard commercial practice.
There are various ways a vehicle may be delivered to the consignee; however, the standard method for medium and heavy duty trucks is consignee delivery, wheels on ground. Vehicles may be driven, fully decked or partially decked (piggybacked). Regardless of the method used for transporting the vehicle, it is the contractor‘s (or his subcontractor‘s) responsibility to present the vehicle(s) to the consignee with all wheels on ground and in normal operating condition. It is not the Government‘s responsibility to provide undecking facilities or assist in the undecking operation. To facilitate vehicle transporting, some components may be removed and other modifications made to the vehicle(s); however, any and all modifications for transport shall be completely reversed before the receiving agency inspects and accepts delivery of the vehicle(s). It is not the Governments responsibility to reinstall any removed component or to reverse any modification made to the vehicle for transporting.”
Changed to “Please see applicable Federal Standards 794, 807, or 833 regarding consignee delivery requirements”
DEALER DELIVERY (6) is revised to add “Every 2 weeks, the Contractor shall furnish the Contracting Officer a list of orders received for destinations not on the Dealer’s Layout (only applicable for orders received with DDR option code)”
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 10 OF 13 The section is revised as follows:
(6) When the contractor receives a delivery order and the destination is not on the “Dealer’s Layout”, the contractor shall choose a dealer location within the geographic radius specified above. Every 2 weeks, the Contractor shall furnish the Contracting Officer a list of orders received for destinations not on the Dealer’s Layout (only applicable for orders received with DDR option code) “NOTE: ALL
DEALER DELIVERY ORDERS PLACED PURSUANT TO THE ABOVE
WILL BE RESTRICTED TO DESTINATIONS WITHIN THE 48
CONTIGUOUS STATES AND THE DISTRIC OF COLUMBIA (DDR);
ANCHORAGE AND FAIRBANKS, ALASKA (DDRA); HONOLULU,
HAWAII (DDRH); GUAM (DDRG); AND HATO REY, PUERTO RICO
(DDRP)”
12) PAGE 30
The Deliverable chart listed in F.12 is revised to incorporate Delivery Orders for Destinations Not on the Dealer’s Layout requirement as follows:
Description Due NLT To
Weekly Status Report per F.13
Each Friday After Contract Award automotiveedi.partnerships@gsa.gov
Shipment Delay Requests per F.10
30 Days Prior to Shipping Date
Contracting Officer
Evidence of Shipment Manuals per F.2
Within 24 Hours of Shipping
Contracting Officer
Notification of Vehicle Defects per F.3
30 Days Prior to Shipping Consignee with a copy to the Contracting Officer
1611 for Each Export Destination per F.17
30 Days in Advance of Anticipated Sate of Availability for Shipment
Transportation Office listed on Delivery Order
Vendor Availability Listing per F.16
As required Contracting Officer
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 11 OF 13
Status Report of Orders and Shipments.
Per F.14 seventh workday of the succeeding month
Administrative Contracting Officer & Contracting Officer
Delivery Orders for Destinations Not on the Dealer’s Layout (only applicable for orders received with DDR option code)
Every two weeks Contracting Officer
SECTION L: INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS
OR RESPONDENTS
13) PAGE 101
2. DUE DATE OF PROPOSALS
is changed from “2) 888E- MEDIUM AND HEAVY DUTY TRUCKS WHICH
OPERATE ON EMERGING TECHNOLOGY”
changed to “2) ITEM 888E – MOTOR VEHICLE, COMMERCIAL, EMERGING
TECHNOLOGIES”
AUTOBID- is changed from “Models found to meet the Federal Standard minimum requirements will be assigned a Standard item designation within the Federal Standards” changed to “GSA Engineering will determine if the proposed vehicle meets all Federal Motor Vehicle requirements and the line item designation of the offer.”
14) PAGE 105
The name of Volume II (TAB B) is changed from: “Exceptions to Federal Standards 794AE and/or 807T (TAB B)” changed to: “Exceptions to Federal Standards 794AE, 833F, and/or 807T (TAB B)”
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 12 OF 13
15) PAGE 106
Model Information (TAB C) For all Optional equipment offered:
Change from “Please note that the submission of additional options does not ensure that they will be accepted or added to the Federal Standards” change to “Please note that the submission of additional options does not ensure that they will be accepted by the Government”
The name of Volume II (TAB E) is changed from: “Destination State Information (TAB E)” changed to “Customer Information (TAB E)” The following section is added and must be submitted under this TAB
C.5 BUS INFORMATION
DOD (Department of Defense) customers may only place delivery orders for buses (chassis and body) manufactured in the United States or Canada. DOD customers are subject to 225.7004 (10 U.S.C. 2534) specifically prohibits the expenditure of DoD appropriations for the acquisition of buses, for use by the United States Armed Forces, from foreign sources. GSA Automotive requires the following information for all bus models offered for our DOD customers before order placement.
The offeror represents that each bus make and model proposed [_] is, [_] is not compliant with Department of Defense (DoD) regulation 225.7004 (10 U.S.C. 2534) if not applicable please write in N/A)
16) PAGE 108
c. PRICING PROPOSAL (VOLUME 3)
Changed from “After each cut-off date, GSA's Engineering Division will review all hardcopy 888E proposals. Models found to meet the Federal Standard‘s minimum requirements will be assigned a Standard item designation within the Federal Standards.
Changed to “After each cut-off date, GSA Engineering will determine if the proposed vehicle meets all Federal Motor Vehicle requirements and the line item designation of the offer.”
17) PAGE 110
Solicitation QMAE-CR-110003-N Amendment 001 PAGE 13 OF 13
L.9 M-FSS-301-A METHOD OF AWARD (APR 1984)
Is changed from: “In addition: Models offered under 888E that do not include emerging technology or cannot be classified under the 794 or 807 Federal Standards will not be considered for award.”Changed to: “In addition: Models offered under 888E that do not include emerging technology will not be considered for award”
18) All other terms and conditions remain the same.
File details come from the government source that posted it. Updated .