Paint Booth SOW - Appendix B - Summary of Available Utilities within Hangar 253.pdf
PDF 173 KB Posted
- Attached to
- Paint Booth- W508S8A -20-Q-0005
- Solicitation number
- W508SA
About this file
This document includes a solicitation for a paint booth and installation services. The New Hampshire Army National Guard requires a paint booth under CLIN 0001 and installation services under CLIN 0002 to meet the statement of work. Quotes are due by the date specified in the solicitation. The requirement is set aside entirely for small businesses with a size standard of 500 employees. The solicitation also specifies terms for payment, system for award management registration, applicable federal acquisition regulation provisions and clauses, and recommended site visit details.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
APPENDIX B – SUMMARY OF AVAILABLE UTILITIES WITHIN HANGAR 253
Provided at Rm 129
1 ½ inch gas line @ north wall
1 inch Compressed Air/Tool Lines x 2 at east and west walls
Floor Drain located at north/center of room for potential Eye Wash/Shower
Electrical service (all located along west wall):
Panel HP-2 (200A main circuit breaker) o 15A 480/277V 3Ph/4Wire previously for Blast Booth Claim System (3HP)
(Unused) o 15A 480/277V 3Ph/4Wire previously for Blast Booth Dry Honer (2HP) (Unused)
Panel HP-4 (150A main circuit breaker) o 60A 480/277V 3Ph/4Wire previously for Despatch Oven Rm 129 (Unused) o Additional capacity available in panel
Panel LP-2 (208/120V)
Panel LP-2A (208/120V)
Fire sprinkler system w/ drain/test valve located in the southeast corner of Rm 129 (capacity calculation needed for Paint Booth requirement)
Surrounding Room Fire Suppression/Alarms – HC-2 coverage provided, 0.2GPM/SQFT
@ Design Area of 2,500SF
Provided Elsewhere in Bldg 253
Electrical capacity at Panel RDP-1 in the main electrical room of Bldg 253, depicted as Room C on drawing AE-101:
70A 480/277V 3Ph/4Wire for Blast Booth Vent (25HP) planned at Rm 120 (Circuit breaker/wiring not installed)
60A 480/277V 3Ph/4Wire for Paint Booth Make Up Air Unit (20HP) planned at Rm 120
(Circuit breaker/wiring not installed)
60A 480/277V 3Ph/4Wire for Paint Booth Exhaust Fan (20HP) planned at Rm 120
(Circuit breaker/wiring not installed)
Compressed Air-Breathing Air (closest breathing air supply is at CTK Rm 123 or at Mechanical
Mezzanine above and west of Room 129)
Domestic water supply (available above ceiling at the restrooms and Mechanical Mezzanine above and west of Room 129)
File details come from the government source that posted it. Updated .