GWMP-216010_Attachment_C_Sign_Dwgs_Specs.pdf

Sign Drawings and Specifications

0515-1150-ARHO

May 5, 2017

Office of NPS Identity Harpers Ferry Center

Interpretive Design Center Harpers Ferry, WV 25425

304-535-4069

Arlington House, The Robert E. Lee

Memorial

Attachment C

1.0 | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/4" = 1' - 0"

DRAWING CATEGORY

IDENTITY (ID01)

REVISION | DATE

2 01-09-17

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

4800%

QTY:

QTY:

10-20-2016

Arlington House

National Park Service U.S. Department of the Interior

The Robert E. Lee Memorial George Washington Memorial Parkway

Primary Site ID

Option B Estimated Cost $10,000

4- 1/

4"

1'-0"

5'-0"

2' -8

GL

Routed Wood Panel with NPS Arrowhead

Painted Steel Post and Internal Frame Structure

Concrete Mow Ring (optional)

4’2”

6'-6"

1.1 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

IDENTITY (ID02)

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Arlington House

National Park Service U.S. Department of the Interior

The Robert E. Lee Memorial

George Washington Memorial Parkway

Secondary Site ID

Option A Estimated Cost $1,000 ($2,200 with Porcelain Panel)

3'-0" 4"

4' -0

1' -6

½

GL

Painted Aluminum Standard VIS Panel Structure

Porcelain ID Panel

4'-0"

1.0A | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

3/4" = 1' - 0"

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

1600%

QTY: 6

1-1.0C 1-1.0D 3/16" Thick Steel Brake Formed C-Channel

3/16" Thick Steel Z-Clips Attached to Western Red Cedar Panels

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick

Post Cap

1-1.0E

4-1.0E

3-1.0E

2-1.0E

17" x 11" Steel Base Plate Welded to Steel Post

2" x 2" x 3/16" Thick Steel Structural Angle, Center Support

4 7/8"

4 7/8" eq eq

CL

1/2"

GL

Painted Western Red Cedar Panel With Graphics

Painted Western Red Cedar Blank Back Panel

8" x 6" x 1/8" Thick Steel Post with Welded 3/16" Thick Post Cap and Welded 17" x 11" x 1/2" Thick Steel Base Plate, Painted Black Bean Soup

8"

1-1.0B Double Post Ground Mount Assembly

Typical Construction

1 1/2"

1 1/2" 3"

Steel C-Channel Support Structure, Painted NPS Black Bean Soup

Black Bean Soup Matthews Paint

MP63855

6"

2-1.0B Double Post Ground Mount Assembly

Typical Plan View

1.0B | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

400%

QTY: 6

3/16" Thick Steel Brake Formed C-Channel

3/16" Thick Steel Brake Formed C-Channel

1/2" Weep Hole (For Drainage)

3/16" Thick Steel Z-Clip

3/16" Thick Steel Z-Clip

#10 x 1" Long, Stainless Steel Pan Head Slotted Wood Screw

#10 x 1" Long, Stainless Steel Pan Head Slotted Wood Screw

1 1/2" Thick, Western Red Cedar Sign Panel

2" x 2" x 3/16" Steel Center Support

4 3/16"

3 1/16"

1 1/2" 3" 1 1/2"

6"

1-1.0C Panel / Frame Connection

Typical Section Cut

3/16" Thick Plate Steel

3"

1 - 1/2"

2-1.0C Brake Formed Channel Detail

1/2 Actual Size

1.0C | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

QTY: 6

18"

1-1.0D Post Footer Detail

Scale: 1 1/2" = 1'-0"

2-1.0D 1/2" Thick Steel Base Plate Cut Detail

Scale: 1 1/2" = 1'-0"

1/

4"

1/ 4"

GL

3-1.0D 1/2" Thick Steel Base Plate

Backfill

18" x 24" Concrete Footer

Gravel Base (For Drainage)

6" (B as ed o n

L o ca l

C o d es a n d C o n d it io n

s) 6"

5/8" Diameter Mounting Holes (Qty: 4)

Note: Cut out Hole For Post

11" x 17" x 1/2" Thick Steel Base Plate eq

1/ 8" eq

1 1/4" eq6 1/8"eq

11"

3/16

3/16

1/2 - 13 Stainless Steel Hex Nut

1/2" Stainless Steel Flat Washer

17" x 11" x 1/2" Thick Steel Base Plate Welded to Post

1/2-13 x 12" Long Stainless Steel L-Hook Anchor Bolt

1/2 - 13 Stainless Steel Acorn Nut

3-1.0D Base Plate Connection Detail

Scale: 3" = 1'-0"

1.0D | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1 1/2" = 1' - 0"

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

800%

QTY: 6

3/16 3/16" Thick Brake Formed Channel

2" x 2" x 3/16" Thick Steel Corner Clip 6" x 8" x 1/8"

Thick Steel Post

3/16" Thick Steel Post Cap

3/16

2-1.0E Post Cap Attachment Detail1-1.0E Corner Clip Weld Detail

1/8" Thick Brake Formed Steel Post

3/16 8"

6"

4-1.0E Brake Formed Steel Post Detail

3/8-16 x 1" Long Stainless Steel Hex Head Cap Screw with Flat Washer Note: Drill and Tap Steel Post to Accept Screw

3-1.0E Channel to Post Attachment Detail

1.0E | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

QTY: 6

3/16" Thick Steel

1/4" Diameter Mounting Holes Along Short End of Clip

3/ 4"

1/4"

5/ 8"

2"

- 3

/8

2-1.0F

3/16" Thick Steel

4-1.0F

5/ 8"

2"

- 3

/8

3/ 4"

1/4"

CL

10" eqeq 10"

24"

5/ 8"

- 3

/8

2"

/8

10" eqeq 10"

24"

CL

3/16" Thick Steel

1/4" Diameter Mounting Holes Along Long End of Clip

3-1.0F Brake Formed Bottom Z-Clip Section

Scale: 3" = 1'-0"

2-1.0F Brake Formed Top Z-Clip Elevation

Scale: 1 1/2" = 1'-0"

4-1.0F Brake Formed Bottom Z-Clip Elevation

Scale: 1 1/2" = 1'-0"

1-1.0F Brake Formed Top Z-Clip Section

Scale: 3" = 1'-0"

3/16" Thick Steel

1.0F | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

QTY: 6

Wood Panel

45° 45°

1/

2"

Wood Panel

1/

2"

3/ 8"

4-1.0G Routed NPS Rawlinson Typography Section Cut

Actual Size

3-1.0G Routed Frutiger Typography Section Cut

Actual Size

3-1.0G

4-1.0G

2-1.0H

3/8" Deep Routed Dado Line Under Overbar, Painted Same Color as Panel Background

1.0G | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

Single-sided with Blank Back, Western Red Cedar Panels with Routed Graphics, Dado, and Embedded 2-Color Aluminum Arrowhead

STRUCTURE:

NPS Standard Double Post Ground Mount Assembly

ENLARGE FOR FULL SCALE

QTY: 6

2-1.0H Arrowhead Attachment Detail

Scale: 3" = 1' - 0"

1-1.0H Standard NPS Arrowhead Artwork

Cut .125 Aluminum Plate to shape of NPS Arrowhead.

All edges ground smooth and clean. Surface and edge to be free of burrs and other defects. Arrowhead to be primed per aluminum manufacturers’ specifications and screened per NPS color specifications. Final Arrowhead to receive Gloss Polyurethane Overspray finish. Arrowhead back to receive 3-1/4" x 3/4" threaded rods to embed into wood panel. Wood panel shall be flat routed to a depth of 1/8" to receive Arrowhead so that it is flush to panel surface.

Match Colors:

Western Red Cedar Panel

.125" 6061-T Aluminum Arrowhead Embedded into Sign Panel

#10-24 Stainless Steel Threaded Stud - Drill And Tap Letter (Rule Line) Back To Accept #10-24 Thread And Apply Thread-lock When Inserting Into Letter Back Note: Stud Length To Be Determined By Contractor Based on Mounting Surface.

1/16"

Align Arrowhead with Panel Surface

PMS 1615White

Material Overview and Fabrication Specifications

Wood Western Red Cedar for NPS Park Identity Signs:

WRC for NPS Park Identity signs shall be laminated clear heart, kiln-dried vertical grain with a maximum moisture content not to exceed 12%. Cedar shall be selected per grading rules of the Western Red Cedar Lumber Associa-tion. Components of all panels including end caps shall be fabricated from the same grade.

Panel Size:

Sign panel shall be fabricated based on dimensions and format specified in the Sign Drawing Package. Panel sizes, specifications, dimensions, typography, color, and proportions shall not be altered.

Panel Assembly:

Panels shall be constructed using clear heart, vertical grain, kiln-dried wood through, glued up one board thick using 2" nominal size dimensional lumber (2" x 6", 2" x 8", 2" x 10"). Panels shall be glued using a phenolic resorcinol moisture resistant adhesive with all surface joints covered. Panels shall be clamped and cured for a minimum of 24 hours or per the manufacturers specifica-tions. Panel fabrication shall occur in air temperatures between 70 and 90 degrees Fahrenheit during drying, adhesive application, and curing.

After curing the panel vertical edges shall be finished with a 2" x 2" vertical end strip, faced glued and reinforced with 3", No 12 stainless steel Phillips flathead screws placed 8" on center. Screw heads shall be counter-sunk to a depth of 3/8" and filled with glue-in wood plugs.

After end strips have cured the panels shall be machine planed to a finish thickness of 1-1/2". All surfaces shall be finish sanded smooth and face and back edges shall rounded to a radius of 1/8".

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders.

Graphic Layout:

Graphic layout of panels shall be as shown on the attached drawings. Graphics to be accurately reproduced from plotted outline template or directly from computer to router based on full size digital vector art. Contractor shall use an accurate grid to ensure layout is aligned vertically and horizontally.

Typography shall be NPS Rawlinson Heavy and Frutiger Bold as shown on attached drawings. Typography shall not be altered, manipulated, or changed. Substitute fonts shall not be used.

NPS Rawlinson Heavy shall be Machine-routed unless otherwise specified with a 90 degree “V" router bit with a 1/8" vertical, flat sidewall inset. Routed letters shall conform to the same size artwork. Routing depth shall be uniform. Corners of type smaller than 3" cap height shall have a radius no greater than 0.0625. Type larger than 3" cap height shall have a corner radius no greater than 0.125".

Frutiger Bold typography shall be Machine-routed unless otherwise specified using a vertical-sided, flat-bottom router bit. Routing depth to be 0.375".

A 0.250" deep dado shall be routed in the panel between the main panel and the overbar. Dado height shall be determined based on cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6"). Dado shall be routed in to the main panel field with the overbar being full height. Routed dado shall be painted same color as main panel field.

NPS Alternate Panel layouts receive a vertical dado in addition to the horizontal dado. Vertical dados shall be routed to a depth of 0.250". Vertical dado width shall be based on the cap height of main typography (0.0833 x cap height - .25" for 3", 0.333" for 4", .50 for 6").

Vertical dados shall be painted as specified below.

Panels receiving an NPS Arrowhead shall be Machine-routed to a depth of 0.125" using a vertical-sided, flat-bottom router bit in Overbar section of panel for NPS Standard Panel layouts or Main Sign Panel for NPS Alternate layouts. Arrowhead shiloutte routed in the sign panel shall be oversized by 1/8" to accommodate inset NPS Arrowhead.

All routed type, dados, and insets shall be sanded smooth and clean. All edges shall be free of burrs and all edges eased prior to application of primer coats and paint.

Paint:

Prior to painting panels shall be Machine drum sanded.

Panels shall not be finished with hand planes, hand-held belt, orbital, or vibrating sanders. All sawdust and sanding residue shall be removed from the sign. Panel shall be properly cleaned per paint manufacturer’s instructions.

Panel surfaces shall be wiped clean using a Matthews (or approved equal) Speed Prep Cleaner formulated for use on wood. All panel surfaces shall be completely dry prior to primer application.

Panels shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces.

Panels shall receive a minimum of two primer coats prior to top coat finishes. Primer coats shall be applied in strict

1.0H | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish applied per the graphic layouts. Panel colors shall be per NPS specifications.

1. Panel Overbar shall be Matthews MP63852, NPS River Rock, Satin VOC Semi Gloss (or approved equal). The Overbar color shall wrap to panel sides;

2. Main Panel Face, sides, panel back, and dado between panel face and overbar shall be Matthews MP 63853, Northwood Brown, Satin VOC Semi Gloss (or approved equal);

3. Panel Typography and Vertical Dado on NPS Alternate Panel layouts shall be Matthews MP63854, NPS Old Prairie, Satin VOC Semi Gloss (or approved equal). Edges between type, dados, and flat panel sections shall be clean and sharp. Ragged edges and transitions, drips, and oversprays and not acceptable.

After a top coat paint application all post and frame surfaces shall receive a Matthews (or approved equal) Satin Clear, MP281-228, Satin Polyurethane Finish. The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

Steel Steel Sign Structure: Wood panels shall be attached to a steel post and steel mounting plate sytem. Sign assem-blies shall be fabricated with A-36, A-500B, or A-847 tubular steel upright posts (4" x 6" x 1/4" wall, 8" x 6" x 1/4" wall, or as otherwise specified)

Steel posts shall be mounted per the specified drawings and can include direct embedment of posts or baseplate mounting.

Steel post length shall be cut per specified drawings.

Posts shall be cut to allow flush alignment of post and sign panel.

Steel mounting plate shall be fabricated with A-36, A-500B, or A-847, x 1/4" steel plate. Internal weld edges shall be welded clean and ground smooth.

Paint:

Prior to painting all steel components shall be sanded, sand blasted, or bead blasted to remove all oils, burrs, and rust. Rust shall be completely removed from all surfaces, edges, and corners. Exposed welds shall be ground clean and smooth. Cleaning of steel surfaces shall be in strict accordance with paint manufacturer’s specifications.

Prior to primer application all steel components shall be cleaned with a Matthews (or approved equal) Speed Prep Cleaner formulated for use on steel. All surfaces shall be completely dry prior to primer application.

After cleaning, all steel components shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be a Matthews Satin VOC, Semi Gloss finish (or approved equal). Post and steel mounting plate colors shall be per NPS specifications or as otherwise specified on the drawings. Post and steel mounting plate assemblies shall receive a minimum of two top coat finishes.

Paint shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles. Paint shall be applied so that weep holes are clear and not plugged.

1. Sign posts and steel mounting plate shall be Matthews MP63855, NPS Black Bean Soup, Satin VOC Semi Gloss (or approved equal).

After final top coat paint applications all steel post and mounting plate surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

1.0I | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

1210-896-INDU

UNIT | AREA

DRAWING SCALE

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

STRUCTURE:

NPS Arrowhead

Arrowhead Fabrication:

NPS Identity Signs requiring an NPS Arrowhead shall receive a silk-screened Arrowhead embedded into the sign panel overbar. The NPS Arrowhead shall be fabricated from 0.125", 6061-T aluminum plate. The Arrowhead shall be CNC routed or water jet cut from plotted outline template or directly from computer to router based on full size digital vector art. The Arrow-head shall receive three 1" long threaded studs welded to the back for applying to the sign panel.

The NPS Arrowhead shall not be altered in any form including resizing, compression or expansion of file, or distortion. Graphic elements within the Arrowhead shall not be manipulated, removed, resized, or altered in any way including changing color relationships.

Paint:

Prior to primer application and screening, the Arrowhead blank shall be cleaned and all edges sanded smooth to remove burrs and other metal filings. The edges shall be eased for paint Cleaning of aluminum surfaces shall be in strict accordance with paint manufacturer’s specifications.

Prior to primer application the Arrowhead shall be cleaned with a Matthews Speed Prep Cleaner (or approved equal) formulated for use on aluminum. All surfaces shall be completely dry prior to primer applica-tion.

After cleaning, the Arrowhead shall be sprayed using a VOC compliant, Mathews White Epoxy Primer (or approved equal) on all surfaces. Components shall receive a minimum of two primer coats prior to top coat finishes.

Primer coats shall be applied in strict accordance with the paint manufacturer’s specifications.

Final top coat colors shall be silk-screened on to the blank using exterior grade screening inks. Arrowhead colors shall be per NPS specifications or as otherwise specified on the drawings. Primer coats and silk-screening shall be applied smooth and clean with no oversprays, drips, paint runs, or bubbles.

After silk-screening all surfaces shall receive a Matthews Satin Clear, MP281-228, Satin Polyurethane Finish (or approved equal). The finish shall be applied in strict accordance with the paint manufacturer’s specifications.

1.0J | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

1210-896-INDU

UNIT | AREA

DRAWING SCALE

SIGN CATEGORY

Identification

REVISION | DATE

1 03-16-2011

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

01-11-2011

DESCRIPTION

PANEL:

STRUCTURE:

2.0 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF05)

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Restrooms

Memorial Museum

Bookstore

Restrooms

Memorial Museum

Bookstore

1' - 1 ½" 2"

3/ 4"

3' -6

Painted Aluminum VIS Panel Structure

12" x 12" Porcelain Wayfinding Panel

GL

rior

2.1 | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF06)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

1' - 1 ½" 2"

3/ 4"

3' -6

Painted Aluminum VIS Panel Structure

12" x 12" Porcelain Wayfinding Panel

GL

The Robert E. Lee

Memorial Museum

The Robert E. Lee

Memorial Museum

2.2 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF07)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Entrance

Entrance

2'-0"2'-0"

1' - 1 ½" 2"

3' -6

1" Painted Aluminum VIS Panel Structure with Stanchion Base

12" x 12" Porcelain Wayfinding Panel

GL

Wayfinding Sign

Option A Estimated Cost $850

2.3 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF08)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Entrance

Entrance

2'-0"2'-0"

1' - 1 ½" 2"

3' -6

1"

Painted Aluminum VIS Panel Structure with Stanchion Base

12" x 12" Porcelain Wayfinding Panel

GL

Wayfinding Sign

1' - 1 ½" 2"

3' -6

Painted Aluminum VIS Panel Structure

12" x 12" Porcelain Wayfinding Panel

GL

2.4 | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF09)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

North Slave Quarters

North Slave Quarters

1"

GL

Wayfinding Sign

1' - 1 ½" 2"

3' -6

Painted Aluminum VIS Panel Structure

12" x 12" Porcelain Wayfinding Panel

GL

2.5 | ARHO

PARK

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF10)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

South Slave Quarters

1"

South Slave Quarters

2.6 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF13)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

2'-0"2'-0"

1' - 1 ½" 2"

3' -6

1" Painted Aluminum VIS Panel Structure with Stanchion Base

12" x 12" Porcelain Wayfinding Panel

GL

Conservatory Entrance Open Daily

9:30-4:30

Conservatory Entrance Open Daily

9-6

Site Closed Today

For more information nps.gov/arho

2.7 | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Ranger Program

Starts Here

Ranger Program

Starts Here

2'-0"2'-0"

1' - 1 ½" 2"

3' -6

1" Painted Aluminum VIS Panel Structure with Stanchion Base

12" x 12" Porcelain Wayfinding Panel

(NEEDS TO BE

MAGNETIC)

GL

Wayfinding Sign

Option A Estimated Cost $850

Interchangeable Magnetic time strips

2.0A | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

Upright Stancion with Casters Detail

Scale: 1/2" = 1'-0"

Due to High Winds Please Use Entrance in the Rear

3/8” Weathering Steel Base

24"

Swivel and Lock Casters Note: Drawings are for design intent only;

Contractor shall determine casters that will support stanchion and engineer Structure to be weighted to withstand high winds.

2.0B | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

National Park Service | U.S. Department of the Interior | NPS UniGuide Program Visitor Information Sign System | VIS and Wayside Hardware Specification Manual 9Revision 2 May 7, 2014

VIS Hardware Mounting Options

Overview

The chart to the right provides a basic overview of the hardware installation options available in the VIS system.

Refer to the fabrication details for more information.

Direct embedment is the typical mounting method for all VIS hardware. Post depth is typically 30" to 36" and posts are secured with concrete.

Stabilizer fins are another mounting accessory for direct embedment. Plates are attached to each base leg. The fins allow installation of the base without the use of concrete.

Socket mounting allows the VIS base to be removed. Oversized sleeves are secured in the ground and the base can slide in and out. This is an excellent choice for park areas with huge snowfall or flood conditions.

Wall mounted bases use a modified baseplate that facilitates installation on low walls.

Baseplate mounting allows installation where a deep footer is not practical. The base features a welded baseplate that attaches to imbeded j-bolts or all-thread rods.

Stabilizer bars are a mounting accessory for direct embedment. The bars are welded to each base leg and prevent racking due to loose and shifting soil. This is a good choice for seashore conditions.

The sled base allows the frame and post to be free standing. For security the base can be mounted with threaded rods.

Deck mount hardware uses a baseplate and anchors to install the base on wooden decks and walkways. Deck mounts are typically custom and site specific.

Direct Embedment (DE) Direct Embedment Stabalizer Fins ( SF)

Direct Embedment Socket Mount (SM)Cap Mount (CM) Baseplate Mount (BP)

Direct Embedment Stabalizer Bars (SB)Sled Base (SB) Deck Mount (DM)

Footer Overview

Scale: 1/2" = 1' 0"

Footer Overview

Scale: 1/2" = 1' 0"

Footer Overview

Scale: 1/2" = 1' 0"

Footer Overview

Scale: 1/2" = 1' 0"

Footer Overview

Scale: 1/2" = 1' 0"

Footer Overview

Scale: 1/2" = 1' 0"

3-IO - 10

GL

1-IO - 10 Low Profile Wall Cap Mount Elevationz

Scale: 1/2" = 1'-0"

3-IO - 10 Mounting Detail

Scale: 1/2 Actual Size

2-IO - 10 Baseplate Plan View

Scale: 1/2 Actual Size

3- 1/

2"

1- 3/

4" 1-

3/ 4"

3/ 8"

7-1/4"

2" 2-1/2" 1-3/4"1"

1/2" Radius

3/8" -16 x 14" Stainless Steel

J-Bolt with Matching Nuts and Washers

Thru Hole Note: Minimum of Two Holes Per Leg

1/4"1/4"

3" eqeq eq

2"

45°

Align

B as ed o n S ig n

S iz e

2-IO -10 Mounting Hole Detail

Scale: 1/2 Actual Size

1-IO - 11 Low Profile Sled Base Side Elevation

Scale: 1/2" = 1' 0"

3-IO - 11 Top Section

Scale: 1/2" = 1' 0"

2-IO - 11

3-IO - 11

2.0C | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

National Park Service | U.S. Department of the Interior | NPS UniGuide Program Visitor Information Sign System | VIS and Wayside Hardware Specification Manual 78Revision 1 February 19, 2010

Upright Series (UP)

GL

2”

2-1/4” +/-

Hex Head Bolt with Hex Nuts

14-Gage (.083”) Galvanized

Perforated Steel

Holes 1” Apart on Center

5-1/4”

2” 2”

30-1/2”

XIM Primer Coat All Interior Surfaces

Drill and Tap and Bolt Frame into Post.

Note: Hex Bolt Size and Quantity as Required for

Structural Integrity

2” x 2” x 3/16” Continuous Weathering Steel Structural Angle

1/8” 2”

1/8” 2”

2-1.0B

1-1.0B Frame Section Cut

Scale: 1-1/2” = 1’-0”

.090 to .125 Graphic Panel

.125 Steel Core Panel

.125 Breakformed Steel Angle with

Eased Corners Note: Angle is

Connected by the Machine Screw and is Removable.

6-32 18-8 Stainless Steel Flat Head Machine Screw

Hex Nut Welded To Frame Extrusion

2” x 2” x 1/4” Steel Extrusion

Section VI: Details

2.0D | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

National Park Service | U.S. Department of the Interior | NPS UniGuide Program Visitor Information Sign System | VIS and Wayside Hardware Specification Manual 83Revision 2 May 7, 2014Section VI: Details

UP - 05

GL

3/8"

See Installation Options

3/8" x 1/4" Barrel Diameter 18-8 Stainless Steel, Torx Pin In Head

Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin In Head Machine Screw

1/4"-20 x 1/2", 18-8 Stainless Steel, Flat Head, Phillips Machine Screw Note: Top of Frame is Connected by Screw and is Removable

1/4"-20, 6061-T6 Machine Screw Nut

Welded to Aluminum Angle

1/2" 2"

1-3/4"

1-UP - 05 Upright Elevation

Scale: 1/2" = 1' -0"

2-UP - 05 Side Section Cut

Scale: 1/2 Actual Size

2-UP - 05

1-UP - 06

Note: Ease Top Edge of Post

Standard NPS 3/16" Aluminum “F” Extrusion

3/4"

1/2" x 2" Aluminum Barstock Post

3/16" Aluminum Core Panel Welded to Angle

.090 to .125 Graphic Panel

3/4"

1" x 1" x 3/16" Breakformed Aluminum Angle

1-3/4" x 3/4" x 3/16" Breakformed Aluminum Angle

General Note:

All breakformed steel and aluminum frame edges shall be eased to prevent sharp edges and allow paint adherence.

1/8" Drilled Weep Hole Note: See Weep Hole Chart

Single-sided Aluminum Fabrication

Upright Series (UP): Barstock Post

2.0E | ARHO

ARLINGTON HOUSE,

THE ROBERT E. LEE

MEMORIAL

PROJECT NUMBER

0515-1150-ARHO

UNIT | AREA

DRAWING SCALE

1/2" = 1' - 0"

DRAWING CATEGORY

WAYFINDING (WF14)

REVISION | DATE

2 1-10-2017

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-24-2016

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

2400%

QTY:

QTY:

10-20-2016

National Park Service | U.S. Department of the Interior | NPS UniGuide Program Visitor Information Sign System | VIS and Wayside Hardware Specification Manual 84Revision 2 May 7, 2014Section VI: Details

UP - 06

1-UP - 06 Frame Front Elevation

Scale: 1/2 Actual Size

2-UP - 06 Frame Top Section

Scale: 1/2 Actual Size

2-UP - 06

1/8" Undercut Panel

1/ 8"

U n d er cu t

Pa n el

3/ 8"

3/ 4"

1/

3/4"

1/16"

1- 3/

4"

Standard NPS 3/16" Aluminum “F” Extrusion

3/8" x 1/4" Barrel Diameter 18-8 Stainless Steel Torx Pin In Head Barrel with 1/4", 10-24, 18-8 Stainless Steel, Torx Pin In Head Machine Screw

1/16" Gap for Panel Expansion

Line Of 3/16" Aluminum Frame

Line Of 1/8" Undercut Graphic Panel

1/2" x 2" Aluminum Barstock Posts

3/16" Aluminum Core Panel Welded to Aluminum Angle

.090 to .125 Graphic Panel

1/16" Gap For Panel Expansion

Standard NPS 3/16" Aluminum “F” Extrusion

1/2" x 2" Aluminum Barstock Posts

See Weld Chart

N o m in al D im en si o n

/2

Single-sided Aluminum Fabrication (Continued)

Upright Series (UP): Barstock Post