YOSE_154910C-100__Final_CDs-Specifications_Part_2_of_3.pdf

Food Service Equipment Brochures for

Ahwahnee Hotel Yosemite National Park

Part III

Submitted By:

Müller Müller Design Associates Food Facilities Planning & Design 1564 Deseret Drive, Minden, Nevada 89423

Voice 775 782-1110 Fax775 782 1267 � HYPERLINK "http://www.mullerdesign.com" �www.mullerdesign.com� Email frank@mullerdesign.com

Wet Waste Sink Cabinets

Printed in USA Rev. 06-27-12 Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

3.21

AIA#

SIS#

Standard Features

Specifications

SWB-12-C, SWB-18-DW, SWB-18-DB

• Manufactured with total welded construction to meet NSF® standards

• All stainless steel construction

• Adjustable stainless steel bullet feet

• 9-1/4″ by 11-1/2″ by 6″ deep sink bowl with hot and cold water gooseneck faucet

• Faucets are standard and ship mounted

• Lift-out perforated plastic wet waste strainer

• Model SWB-12-C has a cabinet base with front hinged access door and storage space for three 1-gallon chemical containers

• Model SWB-18-DW has a cabinet base with work surface trash chute hole and front hinged access door (stainless steel trash con-tainer, model DWC, is available as an accessory)

• Model SWB-18-DB has a drainboard work surface with recessed wet waste sink below

• Models SWB-24L-C and SWB-24R-C include a 12″ drain board section in the work surface and an open front cabinet base with center vertical divider. The L or R in the model number designates the sink location as left or right.

SWB-12-CSWB-18-DW

SWB-18-DB

Product Information

Drain

• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part

#8033 slipnut and part #W-573P washer.

Faucet

• Deck mount on 4″ centers, accepts 3/8″ sink leads, hot and cold water connections required Sink Bowl Dimensions

• 9-1/4″ by 11-1/2″ by 6″ deep Sink Strainer

• Perforated plastic Legs

• 1-5/8″ diameter, 16 gauge stainless steel

• Stainless steel bullet feet Materials

• 20 gauge stainless steel parts include: all components unless otherwise noted

• 18 gauge stainless steel parts include: leg pads

Wet waste sink cabinets are offered in five different 24″ deep models. The 12″ wide chemical storage cabinet holds three 1-gallon chemical containers. The 18″ wide dry waste cabinet holds a trash receptacle and has a 6″ round trash chute in the work surface. The trash receptacle is not included, but a stain-less steel dry waste container is available as an accessory, specify model number DWC. The 18″ wide drainboard model includes a drainboard work surface with recessed wet waste sink below.

The two 24″ wide models include a 12″ drainboard section with lift-out perforated insert and open front cabinet base. A vertical center divider allows three 1-gallon chemical containers to be stored below the sink with the other side of the cabinet available for additional storage. The wet waste sink may be located to the left or right.

SWB-24L-C

All faucets are NSF/ANSI 61, Annex G low lead compliant

A family company manufacturing in the USA

Glastender SWB-18-DB Item#:B01

The Ahwahnee Page: 1

Dimensional Information Wet Waste Sink Cabinets

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

FRONT ELEVATIONS

SIDE ELEVATIONS

SWB-12-C SWB-18-DW SWB-18-DB SWB-24L-C

PLAN VIEWS

DRY WASTE CHUTE

24"

12"

DRAINBACKSPLASH

18"

24"

DOOR

18" 24"

19" 24" 24"

RECESSED WET

WASTE SINK

37" 37" 30" 30" 30"

BACKSPLASH

BEHIND SINK

12" 18" 24"18"

30"30"

6"

30"

6"

37"

6"

37"

19"

DRAINBOARD

WORK SURFACE

37" 37"

24" 24"24" 14" 24"

10"

17"

6"

Glastender SWB-18-DB Item#:B01

The Ahwahnee Page: 2

Printed in USA Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

A family company manufacturing in the USA

Drain

Faucet

Sink Bowl Dimensions

• 9-1/4″ by 11-1/2″ by 6″ deep Sink Strainer

• Perforated plastic Legs

Materials

• 20 gauge stainless steel

BSA-12, BSA-14, BSA-18, BSB-12, BSB-14, BSB-18

Rev. 10-25-13 3.05

Standard Features

Specifications

behind the blender

speed rail.

Power cord access hole in front skirt, behind blender

Blender Stations

BSB-18

(Blender not included)

All faucets are NSF/ANSI 61, Annex G low lead compliant

Glastender BSA-12 Item#:B03

The Ahwahnee Page: 3

Blender Stations

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

SIDE ELEVATIONS

PLAN VIEWS

*NOTE: On BSA-18 model only, the faucet will be installed Left or Right to allow it to swivel into an adjacent ice bin for cleaning. If no side is specified, the faucet will be mounted on the Left side.

18"

30" 29"

15"

16"19" 30"

15" 15"

24" 24" 24"

37" 37" 37" 37"

10"

29"

14"

10"

29"

12" 18"

29"

10"

BACKSPLASH

DRAIN

DRAIN

BACKSPLASH

24"

12"

9"

24"

14"

9"

24"

18"

9"

29"

BSA-12 BSA-14 BSA-18

BSB-12 BSB-14 BSB-18

BSA-12 BSA-14 BSA-18 BSB-12*, BSB-14, BSB-18

*Note: BSB-12 faucet is mounted to backsplash.

Glastender BSA-12 Item#:B03

The Ahwahnee Page: 4

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Combo Ice Bins

CBA-36R-CP10

Rev. 11-02-07 3.04

Standard Features

Specifications

• All stainless steel construction

• One-piece, seamless top and backsplash

• ABS plastic breaker strip around ice bin liner: creates 5/16″ raised edge around liner, acts as thermal barrier to prevent heat transfer, and makes the cover slide easier

• Two tubing chase holes built-in to backsplash

• Sliding stainless steel cover

• CFC free foamed-in-place insulation

• Adjustable stainless steel bullet feet

• Ten circuit cold plate is available on units where the main ice bin liner is 22″ or wider (add suffix ‘-CP10’ to model number)

• Combo Ice Bins combine separate draining ice bin and bottle well compartments into one integral unit. The fully insulated 12″ bottle well comes with two wire racks for ice chilled stor-age of 6 or 8 bottles in 19″ or 24″ deep ice bins, respectively.

The bottle well may be located on the left, right, or both sides of the ice bin.

NOTE: Combo Ice Bins are not recommended for dry, room temperature storage of bottles - instead, higher bottle capacity Liquor Displays (see page 3.23) should be ordered

Drain

• Non-cold plate model: 1-1/2″ tailpiece

• Ten circuit cold plate model: 3/4˝ MPT Tubing Access Holes

Cover

• Two-piece sliding cover, 20 gauge stainless steel, included with all models Cold Plate

• Ten circuit available for 22″ wide (main liner) and larger models only

• Connection is 5/16″ O.D. stainless steel tubing with swaged end

Liner Depth

Ice Capacity

• “A” depth standard = 2.79 lbs X length

• “A” depth extra deep = 3.85 lbs X length

• “B” depth standard = 3.54 lbs X length

• “B” depth extra deep = 4.89 lbs X length Legs

• 1-5/8″ diameter 16 gauge stainless steel

• Stainless steel bullet feet Materials

• 20 gauge stainless steel

• ABS plastic breaker strip around opening of ice bin liner

See reverse side for model number key

Glastender CBA-36L-CP10 Item#:B04

The Ahwahnee Page: 5

Combo Ice Bins

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

“A” Depth-19″ Deep Models

“B” Depth-24″ Deep Models

Model: CBA-36R-CP10 shown

Model Number Overall Length

Main Liner length

Bottle Well Location

Optional Cold Plate

CBA-30 L or R 30″ 16″ Left or Right N/A

CBA-36 L or R 36″ 22″ Left or Right CP10

CBA-42 42″ 16″ Left and Right N/A

CBA-42 L or R 42″ 28″ Left or Right CP10

CBA-48 48″ 22″ Left and Right CP10

CBA-48 L or R 48″ 34″ Left or Right CP10

CBA-54 54″ 28″ Left and Right CP10

CBA-60 60″ 34″ Left and Right CP10

Plan view detailing two bottle well models Model: CBA-48-CP10 shown

Plan View

Front Elevation Side Elevation

Model: CBB-36R-CP10 shown

Model Number Overall Length

Main Liner length

Bottle Well Location

Optional Cold Plate

CBB-30 L or R 30″ 16″ Left or Right N/A

CBB-36 L or R 36″ 22″ Left or Right CP10

CBB-42 42″ 16″ Left and Right N/A

CBB-42 L or R 42″ 28″ Left or Right CP10

CBB-48 48″ 22″ Left and Right CP10

CBB-48 L or R 48″ 34″ Left or Right CP10

CBB-54 54″ 28″ Left and Right CP10

CBB-60 60″ 34″ Left and Right CP10

Plan view detailing two bottle well models Model: CBB-48-CP10 shown

Plan View Front Elevation Side Elevation

COLD PLATECOLD PLATE

10 1/2"

37"

16"

SLIDING COVER

10 1/2"

30"

BACKSPLASH

7"

1" ADJUSTABLE

BULLET FEET

2 - THREE BOTTLE

BOTTLE RACKS

19"

36"

15"

TUBING ACCESS HOLES

DRAIN

MAIN LINER

LENGTH

15"

MAIN LINER

LENGTH

DRAIN

TUBING ACCESS HOLES

2 - THREE BOTTLE

BOTTLE RACKS

2 - THREE BOTTLE

BOTTLE RACKS

10 1/2"

37"

16"1" ADJUSTABLE

BULLET FEET

SLIDING COVER

BACKSPLASH

30"

7"

10 1/2" 24" 20"

DRAIN

2 - FOUR BOTTLE

BOTTLE RACKS

36"

TUBING ACCESS HOLES

MAIN LINER

LENGTH

TUBING ACCESS HOLES

MAIN LINER

LENGTH

2 - FOUR BOTTLE

BOTTLE RACKS

DRAIN 20"

2 - FOUR BOTTLE

BOTTLE RACKS

Glastender CBA-36L-CP10 Item#:B04

The Ahwahnee Page: 6

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Rev. 05-23-05 3.03

Product Information

Product Information

Bottle Racks

BW3

(Positioned Left)

BW3

(Positioned Right)

BW4

(Positioned Right)

BW4

(Positioned Left)

Bottle Wells are ABS plastic molded bottle holders that are placed in an ice bin to hold ice chilled mix ingredient pour and store bottles. There are two sizes of wells: 3-bottle, model number BW3, for 19″ deep ice bins and 4-bottle, model number BW4, for 24″ deep ice bins. The 3-bottle version is also used with the IB-38X24 pass thru ice bin.

A bottle well may be placed on one or both sides of an ice bin and it is designed with a special ledge on one side to hold a slid-ing ice bin cover. When bottle wells are ordered with an original ice bin, the correct, smaller sliding ice bin cover is automatically provided.

For three bottles stored on one side of a 19″ deep ice bin, specify one model number BW3. For three bottles stored on both sides of a 19″ deep ice bin, specify a quantity of two BW3.

For four bottles stored on one side of a 24″ deep ice bin, specify one model number BW4. For four bottles stored on both sides of a 24″ deep ice bin, specify a quantity of two BW4

Bottle Racks are vinyl-coated wire racks that are placed in an ice bin to hold ice chilled mix ingredient pour and store bottles.

There are two sizes of wire racks: 3-bottle, model number BR3, for 19″ deep ice bins and 4-bottle, model number BR4, for 24″ deep ice bins.

Bottle Racks are intended for use with smaller ice bins, where the sole purpose of the ice bin is to provide insulated storage for pour and store bottles. Bottle racks are most often used with 6″ or 12″ wide ice bins, which hold one or two racks, respectively.

For example an IBA-6 ice bin holds one BR3, while an IBA-12 ice bin holds two BR3.

Bottle Wells

BR4

(Bottles not included) BR3

Glastender BR3 Item#:B04

The Ahwahnee Page: 7

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Rev.11-06-07 3.32

Standard Features

• All stainless steel construction

• Open step-and-rail design for easy cleaning and better view of bottles

• Radius corners on steps and rails for easy cleaning

• ABS sound deadening covers

• Long underbar skirt allows speed rails to mount low enough that bottles do not rise above deck surface and inhibit work-flow

• Single and double step models

• Locking covers are available (see reverse side for model numbers)

• Locking covers for single speed rails include built-in storage hangers when ordered with original equipment

• Available in custom lengths up to 84″

• Rails have a clear snap-on liquor identification label cover

Specifications

(model numbers on reverse side)

Materials

• 20 gauge stainless steel parts include: steps, rails, and locking covers

• 14 gauge stainless steel parts include: ends

• ABS step and rail covers

SSR-36 with SSRC-36 installed

SSR-36 with SSRC-36 in storage below

SSR-24

DSR-24

Speed Rails & Locking Covers

Glastender SSR-36 Item#:B04

The Ahwahnee Page: 8

5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

LOCKING SPEED RAIL

COVER HANGER AVAILABLE

WITH SINGLE SPEED RAIL ONLY

PLAN VIEW

FRONT ELEVATION SIDE ELEVATION

SSR-__ SSRC-__

DSR-__ DSRC-__

Single Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is SSR- X , where X = the length of the unit in inches. Speed rails over 42" also have a center support.

ABS PLASTIC COVER

OVER STAINLESS STEEL

"C" CHANNEL

J-HOOK

SPEED RAIL

LOCKING COVER

Single Speed Rail Locking covers are available in one inch increments from 12" to 42". The model number designation is SSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 42". (NOTE: 24" and 29" deep Liquor Displays require multiples of four and five locking covers, respectively)

J-HOOK

LOCKING COVER

SPEED RAIL

Double Speed Rails are available in one inch increments from 12" to 84" in length.

The model number designation is DSR- X , where X = the length of the unit in inches. Double speed rails over 42" also have a center support.

Double Speed Rail Locking covers are available in one inch increments from 12" to 42". The model number designation is DSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 42". (NOTE: Double speed rail locking covers are actually just two single speed rail locking covers.)

13 7/8"

6 13/16"

3 3/8"

13 7/8"

6 13/16"

3 3/8"

6"

4"

8 1/4"

5"

5"

X

8 1/4"

4" 4"

2"

10 1/2"

10"

6"

10"

18"

10 1/2"

PLAN VIEW

FRONT ELEVATION SIDE ELEVATION

Speed Rails and Locking Covers

X X

X X

Glastender SSR-36 Item#:B04

The Ahwahnee Page: 9

Müller Design, Inc.

Project: The Ahwahnee Item #: B05

Mfr:

By Vender

Soda gun Not in contract. Owner's choice of vendor to furnish (3) eight-channel, soda guns installed as shown in plans.

a) Vendor to furnish and install all required compressors, tubing, clamps, supports and connections.

b) Food service equipment contractor to verify PVC conduit requirements with vendor before general contractor's final installation of same.

Drainboard Cabinets

DBCA-18

Printed in USA Rev. 11-06-08 Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

3.16

AIA#

SIS#

Standard Features

Specifications

See reverse side for model number key

Drain

• 1/2″ welded tailpiece. Clear vinyl drain line is connected to the tailpiece at the factory. A 1/2″ by 1/2″ barbed plastic elbow is provided to make the connection at the bottom of the unit.

Legs

• 1-5/8″ diameter, 16 gauge stainless steel

• Stainless steel bullet feet Materials

• 20 gauge stainless steel parts include: all components unless otherwise noted

• 18 gauge stainless steel parts include: leg pads

Drainboard Cabinets have a bottom shelf, adjustable interme-diate shelf, and drainboard work surface. They are available with or without doors. The models with doors come with a lock standard. The 12″, 18″ and 24″ wide models only have one door and all other models have two doors.

• All stainless steel construction

• Adjustable stainless steel bullet feet

• One-piece, seamless top and backsplash featuring 1/4″ radius corners for easy cleaning

• Door(s) features integral handle

• Lock(s) standard on models with a door(s)

• Available without door(s) (add suffix ‘-LD’ to model number)

• Exclusive design drainboard top with drain pan and separate perforated insert for better air circulation.

• Intermediate shelf and floor are still removable after unit is plumbed and include radius corners for easy cleaning.

• Plumbing connection is made underneath the unit and does not interfere with shelf or floor.

• Smooth interior walls for easy cleaning and a finished appearance.

• All storage is on a level plane

• Also available with flat stainless steel fillerboard top in lieu of drainboard top. Substitute an “F” for the “D” in the model number when ordering

A family company manufacturing in the USA

Glastender DBCA-24-LD Item#:B06

The Ahwahnee Page: 10

Drainboard Cabinets

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

“A” Depth-19″ Deep Models

SIDE VIEW FRONT VIEW

PLAN VIEW

“B” Depth-24″ Deep Models

PLAN VIEW

SIDE VIEW FRONT VIEW

Model Number

Overall Length

Number of Doors

DBCA-12 12″ 1

DBCA-18 18″ 1

DBCA-24 24″ 1

DBCA-30 30″ 2

DBCA-36 36″ 2

DBCA-42 42″ 2

DBCA-48 48″ 2

Model Number

Overall Length

Number of Doors

DBCB-12 12″ 1

DBCB-18 18″ 1

DBCB-24 24″ 1

DBCB-30 30″ 2

DBCB-36 36″ 2

DBCB-42 42″ 2

DBCB-48 48″ 2

Model DBCA-18 shown

Model DBCB-18 shown

19"

6"

19"

30"

LOCKING DOOR

(ALSO AVAILABLE

WITHOUT DOOR)

37"

7"

18"

24"

6"

24"

18"

30"

LOCKING DOOR

(ALSO AVAILABLE

WITHOUT DOOR)

37"

7"

Glastender DBCA-24-LD Item#:B06

The Ahwahnee Page: 11

Two, Three and Four Compartment Sinks

Printed in USA Rev.12-07-11 Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

3.22

AIA#

SIS#

Standard Features

Specifications

(see reverse side for model numbers)

• All stainless steel construction & stainless steel bullet feet

• 18 gauge stainless steel one-piece seamless top, front rail and backsplash featuring 1/4″ radius corners for easy cleaning

• 16 gauge stainless steel fabricated sink bowls

• 11″ by 14″ by 10-1/4″ deep sink bowl with hot and cold water faucet

• Faucets are standard and ship mounted

• Extra wide sink bowl easily accomodates brush washer

• 19″ deep models have a backsplash mounted faucet

• Integral drainboards have lift-out stainless steel perforated insert for better air circulation

• Perforated stainless steel inserts are available to cover sinks when not in use

• One over-flow tube per sink bowl included

TSB-60-S

Product Information Multiple Sinks come in three different varieties: two, three, and four compartment. They feature an exclusive one-piece 18 gauge stainless steel top that is seamless from the front rail all the way through the backsplash. Each variety is offered with or without built-in drainboards on one or both sides of the sink compart-ment. Drainboards, where included, are a seamless and integral part of the worksurface. The seamless welded bowls are 16 gauge fabricated stainless steel. An ‘L’ or ‘R’ suffix in the model number designates the location of the sink compartment as left or right when there is only one drainboard.

Drains

• 1-1/2″ I.P.S. Threaded drain will fit Dearborn part

#8033 slipnut and part #W-573P washer.

Faucet

• “A” - 19″ deep: backsplash mounted on 4″ centers, 3/8″ copper leads provided, hot and cold water connections required

• “B” - 24″ deep: deck mounted on 4″ centers, accepts 3/8″ sink leads, hot and cold water connec-tions required

Sink Bowl Dimensions

• 11″ by 14″ by 10-1/4″ deep Legs

• 1-5/8″ diameter 16 gauge stainless steel

• Stainless steel bullet feet Materials

• 20 gauge stainless steel parts include: all components unless otherwise noted

• 18 gauge stainless steel parts include:

one-piece top, front rail and back splash

• 16 gauge stainless steel parts include:

sink bowls

All faucets are NSF/ANSI 61, Annex G low lead compliant

A family company manufacturing in the USA

Glastender TSA-60-S Item#:B07

The Ahwahnee Page: 12

Multiple Sinks

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

19″ Deep Models

24″ Deep Models

A B C D No. of Sink

Bowls

Sink Location

DSA-24-S DSB-24-S N/A 24″ N/A 24″ 2 Center

DSA-36L-S DSB-36L-S N/A 24″ 12″ 36″ 2 Left

DSA-36R-S DSB-36R-S 12″ 24″ N/A 36″ 2 Right

DSA-48-S DSB-48-S 12″ 24″ 12″ 48″ 2 Center

TSA-36-S TSB-36-S N/A 36″ N/A 36″ 3 Center

TSA-48L-S TSB-48L-S N/A 36″ 12″ 48″ 3 Left

TSA-48R-S TSB-48R-S 12″ 36″ N/A 48″ 3 Right

TSA-60-S TSB-60-S 12″ 36″ 12″ 60″ 3 Center

TSA-60L-S TSB-60L-S N/A 36″ 24″ 60″ 3 Left

TSA-60R-S TSB-60R-S 24″ 36″ N/A 60″ 3 Right

TSA-66L-S TSB-66L-S N/A 36″ 30″ 66″ 3 Left

TSA-66R-S TSB-66R-S 30″ 36″ N/A 66″ 3 Right

TSA-72-S TSB-72-S 18″ 36″ 18″ 72″ 3 Center

TSA-84-S TSB-84-S 24″ 36″ 24″ 84″ 3 Center

TSA-96-S TSB-96-S 30″ 36″ 30″ 96″ 3 Center

FSA-48-S FSB-48-S N/A 48″ N/A 48″ 4 Center

FSA-60L-S FSB-60L-S N/A 48″ 12″ 60″ 4 Left

FSA-60R-S FSB-66R-S 12″ 48″ N/A 60″ 4 Right

FSA-66L-S FSB-66L-S N/A 48″ 18″ 66″ 4 Left

FSA-66R-S FSB-66R-S 18″ 48″ N/A 66″ 4 Right

FSA-72-S FSB-72-S 12″ 48″ 12″ 72″ 4 Center

FSA-72L-S FSB-72L-S N/A 48″ 24″ 72″ 4 Left

FSA-72R-S FSB-72R-S 24″ 48″ N/A 72″ 4 Right

FSA-84-S FSB-84-S 18″ 48″ 18″ 84″ 4 Center

FSA-96-S FSB-96-S 24″ 48″ 24″ 96″ 4 Center

“A” Depth-19″ Deep Models “B” Depth-24″ Deep Models

“A” Depth-19″ Deep Models

“B” Depth-24″ Deep Models

Number of sink bowls and location of sinks will vary according to the model, see the table below for exact specifications. Four bowl sink faucets feature a double joint spout. Three bowl sink model shown.

B

19"

PLAN VIEWFRONT RAIL

A C

D B

24"

PLAN VIEWFRONT RAIL

A C

D

30"

16"

19"

37"

BACKSPLASH

SIDE ELEVATION

30"

16"

24"

37"

SIDE ELEVATION

BACKSPLASH

Glastender TSA-60-S Item#:B07

The Ahwahnee Page: 13

Project:

Item #:

Mfr:

Administrator Text Box The Ahwahnee

Administrator Text Box B08

Administrator Text Box Spare number

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

A family company manufacturing in the USA

Drain

Faucet

Sink Bowl Dimensions

• 9-1/4″ by 11-1/2″ by 6″ deep Sink Strainer

• Perforated plastic Legs

Materials

• 20 gauge stainless steel

BSA-12, BSA-14, BSA-18, BSB-12, BSB-14, BSB-18

Rev. 10-25-13 3.05

Standard Features

Specifications

behind the blender

speed rail.

Power cord access hole in front skirt, behind blender

Blender Stations

BSB-18

(Blender not included)

All faucets are NSF/ANSI 61, Annex G low lead compliant

Glastender BSA-12 Item#:B09

The Ahwahnee Page: 14

Blender Stations

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

SIDE ELEVATIONS

PLAN VIEWS

*NOTE: On BSA-18 model only, the faucet will be installed Left or Right to allow it to swivel into an adjacent ice bin for cleaning. If no side is specified, the faucet will be mounted on the Left side.

18"

30" 29"

15"

16"19" 30"

15" 15"

24" 24" 24"

37" 37" 37" 37"

10"

29"

14"

10"

29"

12" 18"

29"

10"

BACKSPLASH

DRAIN

DRAIN

BACKSPLASH

24"

12"

9"

24"

14"

9"

24"

18"

9"

29"

BSA-12 BSA-14 BSA-18

BSB-12 BSB-14 BSB-18

BSA-12 BSA-14 BSA-18 BSB-12*, BSB-14, BSB-18

*Note: BSB-12 faucet is mounted to backsplash.

Glastender BSA-12 Item#:B09

The Ahwahnee Page: 15

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

F40336 – LXeR and LXePR Hot and Cold Page 1 of 4

LXeR and LXePR HOT AND COLD701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

LX

eR and

LX

eP R

H O

T A

N D

C O

LD

STANDARD FEATURES

■ Racks per hour Light Normal Heavy LXeR 30 24 13 LXePR 38 29 14

■ .62 gallons of water per rack – LXeR

1.14 gallons of water per rack – LXePR

■ Hot water or chemical sanitation units available

■ Steam Elimination and Energy Recovery (LXeR model only)

■ PuriRinse cycle (Potable water rinse to remove chemical residue) (LXePR model only)

■ NSF Certified pot and pan cycle on heavy cycle

(LXeR model only)

■ Low chemical alert indicators

■ Sense-A-Temp™ booster heater capable of

70 rise, provided on LXeR models

■ Chemical pump “auto-prime”

■ Advanced Service diagnostics

■ Clogged wash arm sensing

■ Custom cycle selection – light, normal, heavy

■ Automated delime cycle – includes booster deliming

■ Deep drawn stainless steel tank

■ Microcomputer, top mounted controls with advanced digital cycle/temperature display

■ Revolving upper and lower anti-clogging wash arms

■ Snap in revolving upper and lower rinse arms

■ Removable stainless steel scrap screen

■ Corrosion resistant pump

■ Energy Saver mode

■ Automatic pumped drain

■ 17" door opening

■ Dirty water indicator

■ Automatic fill

■ Detergent, rinse aid and delime pumps standard

(plus sanitizer pump on chemical machine)

■ Electric tank heat

■ Two dishracks – one peg and one combination type

■ Customizable “advansys” button to select favorites function

■ Auto clean cycle washes down inside of machine at shutdown

MODELS

❑ LXeR – Energy Recovery ❑ LXePR – PuriRinse

STANDARD VOLTAGES

❑ 120/208-240(3W)/60/1 (LXeR model only) ❑ 120/60/1 (LXePR model only)

OPTIONS AT EXTRA COST

❑ 208-240(2W)/60/1 (LXeR model only) ❑ 208-240/60/3 (LXeR model only)

ACCESSORIES

❑ Power cord kits ❑ Stainless steel base with 6" legs ❑ 17" stainless steel stand with storage ❑ External caster kit ❑ DWT-LXe drain water tempering kit

Specifications, Details and Dimensions on Back.

Hobart LXEPR-3 Item#:B10

The Ahwahnee Page: 16

701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com

Page 2 of 4 F40336 – LXeR and LXePR Hot and Cold

LXeR

HOT

The Ahwahnee Page: 17

F40336 – LXeR and LXePR Hot and Cold Page 3 of 4

LXePR

COLD

The Ahwahnee Page: 18

Page 4 of 4 F40336 – LXeR and LXePR Hot and Cold

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

LXeR and LXePR

HOT AND COLD

F40336 (11/12) LITHO IN U.S.A. (H-01)

SPECIFICATIONS

DESIGN: Front opening, equipped for installation in either free-standing or undercounter-type operations.

CONSTRUCTION: 300 series stainless steel tank, door and top panel.

PUMP: Centrifugal-type, integral with motor, horizontally mounted. Pump capacity 38 gpm.

MOTOR: Single phase, furnished for all electrical specifications.

Factory sealed lubrication. Inherent overload protection with auto reset.

WASH AND RINSE CYCLE: Complete automatic type, controlled by solid-state electronics. Cycle may be interrupted any time by opening door. Cycle continues when door is closed.

• Initial cycle fills wash tank, to be recirculated each wash cycle.

Some wash water is drained off before rinse cycle. Rinse cycle refreshes wash water and tank heat.

RINSE PUMP: Powered by a single phase motor, the rinse pump is made of high strength engineered composite material.

BLOWER: The blower is a 60mm x 300mm tangential wheel powered by a 2-pole single phase motor for quiet and reliable operation, LXeR only.

CONDENSER COIL: The condensing system uses a tube and fin coil constructed of copper and corrosion resistant aluminum.

The condenser coil allows for energy recovery from waste heat in the moisture laden air that would normally escape into the environment after a dishwashing cycle, LXeR only.

RINSE AND SANITATION:

• LXeR: Sanitation is accomplished by means of a built-in booster heater designed to raise temperature of water to a minimum of 180°F from an incoming water temperature of 55°F.

• LXePR: Sanitation is accomplished by injection of proper amount of sodium hypochlorite solution (liquid bleach) into final rinse water to achieve a minimum of 50PPM sanitizing solution. Injection of sodium hypochlorite is accomplished by a built-in sanitizing chemical pump. Minimum required hot water temperature is 120°F.

– Potable water rinse to remove chemical residue.

– To be used with sanitizer approved for use with post sanitizing rinse

• CHECK SANITIZER CONCENTRATION: PuriRinse must be off (hold Wash button for 5 seconds). Verify that there is suffi-cient chemical supply. Run cycle and use test trips on wetted surface of glasses after cycle is complete. If concentration is below minimum required, contact your local Hobart Service office.

ENERGY RECOVERY: Heat energy is recovered from the con-densation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F.

PUMPED DRAIN: Machine automatically drains water through a built-in pump. Maximum 38" drain height permitted.

ELECTRIC BOOSTER HEATER: 4.9 KW electric booster with Sense-A-Temp™ technology adequately sized to raise 55°F inlet water to 180°F, with the aid of the energy recovery system.

RACKING: Machines accommodate racks from 10" x 20" to 20" x 20". Also accepts 16" x 18" cafeteria trays.

NOTE: Certain materials, including silver, aluminum and pewter are attacked by Sodium Hypochlorite solution in the chemical sanitizing mode of operation.

SPECIFICATIONS: Listed by Underwriters Laboratories Inc. and NSF International.

MACHINE RATINGS

LXePR LXeR

Light Normal Heavy Light Normal Heavy

Racks per Hour Rate 38 29 14 30 24 13

Dishes per Hour (25 per Rack Avg.) 950 725 350 750 600 325

Glasses per Hour (36 per Rack Avg.) 1368 1044 504 1080 864 468

Controls Microcomputer

Tank Capacity - Gallons 2.9

Overall Dimensions - H x W x D 321⁄2" x 2315⁄16" x 259⁄16" 321⁄2" x 2315⁄16" x 2613⁄16"

Cycle Time - Seconds 94 124 254 120 146 275

Tank Heat 1.8 KW

Electric Booster Heater N/A 4.9 KW

Water Usage Per Rack - Gallons 1.14 .62

Drain Design Pumped

Door Opening Height 17"

Detergent Pump Standard

Rinse-Aid Pump Standard

Delime Pump Standard

Sanitizer Pump Standard N/A

Chemical Prime (auto prime) Standard

Peak Drain Flow - GPM 4.0

Advanced Service Diagnostics Standard

Advanced Cleaning Cycle Standard

70°Rise Sense-A-Temp™ Booster Heater N/A Standard

Incoming Water Temperature Required (minimum) 120° 55°

The Ahwahnee Page: 19

Item #:

Mfr:

Administrator Text Box The Ahwahnee

Administrator Text Box B11

Administrator

Item #:

Mfr:

Administrator Text Box The Ahwahnee

Administrator Text Box B12

Administrator

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Combo Ice Bins

CBA-36R-CP10

Rev. 11-02-07 3.04

Standard Features

Specifications

• All stainless steel construction

• One-piece, seamless top and backsplash

• ABS plastic breaker strip around ice bin liner: creates 5/16″ raised edge around liner, acts as thermal barrier to prevent heat transfer, and makes the cover slide easier

• Two tubing chase holes built-in to backsplash

• Sliding stainless steel cover

• CFC free foamed-in-place insulation

• Adjustable stainless steel bullet feet

• Ten circuit cold plate is available on units where the main ice bin liner is 22″ or wider (add suffix ‘-CP10’ to model number)

• Combo Ice Bins combine separate draining ice bin and bottle well compartments into one integral unit. The fully insulated 12″ bottle well comes with two wire racks for ice chilled stor-age of 6 or 8 bottles in 19″ or 24″ deep ice bins, respectively.

The bottle well may be located on the left, right, or both sides of the ice bin.

NOTE: Combo Ice Bins are not recommended for dry, room temperature storage of bottles - instead, higher bottle capacity Liquor Displays (see page 3.23) should be ordered

Drain

• Non-cold plate model: 1-1/2″ tailpiece

• Ten circuit cold plate model: 3/4˝ MPT Tubing Access Holes

Cover

• Two-piece sliding cover, 20 gauge stainless steel, included with all models Cold Plate

• Ten circuit available for 22″ wide (main liner) and larger models only

• Connection is 5/16″ O.D. stainless steel tubing with swaged end

Liner Depth

Ice Capacity

• “A” depth standard = 2.79 lbs X length

• “A” depth extra deep = 3.85 lbs X length

• “B” depth standard = 3.54 lbs X length

• “B” depth extra deep = 4.89 lbs X length Legs

• 1-5/8″ diameter 16 gauge stainless steel

• Stainless steel bullet feet Materials

• 20 gauge stainless steel

• ABS plastic breaker strip around opening of ice bin liner

See reverse side for model number key

Glastender CBA-36L-CP10 Item#:B13

The Ahwahnee Page: 20

Combo Ice Bins

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

“A” Depth-19″ Deep Models

“B” Depth-24″ Deep Models

Model: CBA-36R-CP10 shown

Model Number Overall Length

Main Liner length

Bottle Well Location

Optional Cold Plate

CBA-30 L or R 30″ 16″ Left or Right N/A

CBA-36 L or R 36″ 22″ Left or Right CP10

CBA-42 42″ 16″ Left and Right N/A

CBA-42 L or R 42″ 28″ Left or Right CP10

CBA-48 48″ 22″ Left and Right CP10

CBA-48 L or R 48″ 34″ Left or Right CP10

CBA-54 54″ 28″ Left and Right CP10

CBA-60 60″ 34″ Left and Right CP10

Plan view detailing two bottle well models Model: CBA-48-CP10 shown

Plan View

Front Elevation Side Elevation

Model: CBB-36R-CP10 shown

Model Number Overall Length

Main Liner length

Bottle Well Location

Optional Cold Plate

CBB-30 L or R 30″ 16″ Left or Right N/A

CBB-36 L or R 36″ 22″ Left or Right CP10

CBB-42 42″ 16″ Left and Right N/A

CBB-42 L or R 42″ 28″ Left or Right CP10

CBB-48 48″ 22″ Left and Right CP10

CBB-48 L or R 48″ 34″ Left or Right CP10

CBB-54 54″ 28″ Left and Right CP10

CBB-60 60″ 34″ Left and Right CP10

Plan view detailing two bottle well models Model: CBB-48-CP10 shown

Plan View Front Elevation Side Elevation

COLD PLATECOLD PLATE

10 1/2"

37"

16"

SLIDING COVER

10 1/2"

30"

BACKSPLASH

7"

1" ADJUSTABLE

BULLET FEET

2 - THREE BOTTLE

BOTTLE RACKS

19"

36"

15"

TUBING ACCESS HOLES

DRAIN

MAIN LINER

LENGTH

15"

MAIN LINER

LENGTH

DRAIN

TUBING ACCESS HOLES

2 - THREE BOTTLE

BOTTLE RACKS

2 - THREE BOTTLE

BOTTLE RACKS

10 1/2"

37"

16"1" ADJUSTABLE

BULLET FEET

SLIDING COVER

BACKSPLASH

30"

7"

10 1/2" 24" 20"

DRAIN

2 - FOUR BOTTLE

BOTTLE RACKS

36"

TUBING ACCESS HOLES

MAIN LINER

LENGTH

TUBING ACCESS HOLES

MAIN LINER

LENGTH

2 - FOUR BOTTLE

BOTTLE RACKS

DRAIN 20"

2 - FOUR BOTTLE

BOTTLE RACKS

Glastender CBA-36L-CP10 Item#:B13

The Ahwahnee Page: 21

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Rev. 05-23-05 3.03

Product Information

Product Information

Bottle Racks

BW3

(Positioned Left)

BW3

(Positioned Right)

BW4

(Positioned Right)

BW4

(Positioned Left)

Bottle Wells are ABS plastic molded bottle holders that are placed in an ice bin to hold ice chilled mix ingredient pour and store bottles. There are two sizes of wells: 3-bottle, model number BW3, for 19″ deep ice bins and 4-bottle, model number BW4, for 24″ deep ice bins. The 3-bottle version is also used with the IB-38X24 pass thru ice bin.

A bottle well may be placed on one or both sides of an ice bin and it is designed with a special ledge on one side to hold a slid-ing ice bin cover. When bottle wells are ordered with an original ice bin, the correct, smaller sliding ice bin cover is automatically provided.

For three bottles stored on one side of a 19″ deep ice bin, specify one model number BW3. For three bottles stored on both sides of a 19″ deep ice bin, specify a quantity of two BW3.

For four bottles stored on one side of a 24″ deep ice bin, specify one model number BW4. For four bottles stored on both sides of a 24″ deep ice bin, specify a quantity of two BW4

Bottle Racks are vinyl-coated wire racks that are placed in an ice bin to hold ice chilled mix ingredient pour and store bottles.

There are two sizes of wire racks: 3-bottle, model number BR3, for 19″ deep ice bins and 4-bottle, model number BR4, for 24″ deep ice bins.

Bottle Racks are intended for use with smaller ice bins, where the sole purpose of the ice bin is to provide insulated storage for pour and store bottles. Bottle racks are most often used with 6″ or 12″ wide ice bins, which hold one or two racks, respectively.

For example an IBA-6 ice bin holds one BR3, while an IBA-12 ice bin holds two BR3.

Bottle Wells

BR4

(Bottles not included) BR3

Glastender BR3 Item#:B13

The Ahwahnee Page: 22

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Rev.11-06-07 3.32

Standard Features

• All stainless steel construction

• Open step-and-rail design for easy cleaning and better view of bottles

• Radius corners on steps and rails for easy cleaning

• ABS sound deadening covers

• Long underbar skirt allows speed rails to mount low enough that bottles do not rise above deck surface and inhibit work-flow

• Single and double step models

• Locking covers are available (see reverse side for model numbers)

• Locking covers for single speed rails include built-in storage hangers when ordered with original equipment

• Available in custom lengths up to 84″

• Rails have a clear snap-on liquor identification label cover

Specifications

(model numbers on reverse side)

Materials

• 20 gauge stainless steel parts include: steps, rails, and locking covers

• 14 gauge stainless steel parts include: ends

• ABS step and rail covers

SSR-36 with SSRC-36 installed

SSR-36 with SSRC-36 in storage below

SSR-24

DSR-24

Speed Rails & Locking Covers

Glastender SSR-36 Item#:B13

The Ahwahnee Page: 23

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

LOCKING SPEED RAIL

COVER HANGER AVAILABLE

WITH SINGLE SPEED RAIL ONLY

PLAN VIEW

FRONT ELEVATION SIDE ELEVATION

SSR-__ SSRC-__

DSR-__ DSRC-__

Single Speed Rails are available in one inch increments from 12" to 84" in length. The model number designation is SSR- X , where X = the length of the unit in inches. Speed rails over 42" also have a center support.

ABS PLASTIC COVER

OVER STAINLESS STEEL

"C" CHANNEL

J-HOOK

SPEED RAIL

LOCKING COVER

Single Speed Rail Locking covers are available in one inch increments from 12" to 42". The model number designation is SSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 42". (NOTE: 24" and 29" deep Liquor Displays require multiples of four and five locking covers, respectively)

J-HOOK

LOCKING COVER

SPEED RAIL

Double Speed Rails are available in one inch increments from 12" to 84" in length.

The model number designation is DSR- X , where X = the length of the unit in inches. Double speed rails over 42" also have a center support.

Double Speed Rail Locking covers are available in one inch increments from 12" to 42". The model number designation is DSRC- X , where X = the length of the unit in inches. Use multiple covers for speed rails longer than 42". (NOTE: Double speed rail locking covers are actually just two single speed rail locking covers.)

13 7/8"

6 13/16"

3 3/8"

13 7/8"

6 13/16"

3 3/8"

6"

4"

8 1/4"

5"

5"

X

8 1/4"

4" 4"

2"

10 1/2"

10"

6"

10"

18"

10 1/2"

PLAN VIEW

FRONT ELEVATION SIDE ELEVATION

Speed Rails and Locking Covers

X X

X X

Glastender SSR-36 Item#:B13

The Ahwahnee Page: 24

Item #:

Mfr:

Administrator Text Box The Ahwahnee

Administrator Text Box B14

Administrator Text Box Fabricator

Administrator

Custom Drainboard-Corner

Item #:

Mfr:

Administrator Text Box The Ahwahnee

Administrator Text Box B15

Administrator Text Box By vender

Administrator

Espresso machine

Front Venting Coolers One and Two Door

Self-Contained

Printed in USA Rev. 03-21-13 Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

4.15

AIA#

SIS#

Electrical

• 120V, 1 phase, 60 Hz, FV24 - 2.15 full load amps, FV48 - 3.25 full load amps

• Dedicated 15 amp circuit is required

• Includes a 6 foot grounded cord and plug which exits the back of refrigeration compartment

Refrigeration

• FV24 - 1/10 HP, FV48 - 1/6 HP, R134a refrigerant

Operating Range

• 34º F to 40º F

Plumbing

• Automatic condensate evaporator. No drain connection required

Shelving

• One adjustable coated shelf and one bottom coated rack per door included

Legs

• 1-5/8″ diameter

• Stainless steel bullet feet

Materials

• 22 gauge stainless steel parts include: interior floor, walls, ceiling, front of cabinet, and evaporator housing

• 20 gauge stainless steel parts include: sides and optional top

• 22 gauge black vinyl-clad parts include: standard door(s), and compressor compartment cover

• 22 gauge galvanized steel parts include: exterior sub-top and back

• 16 gauge stainless steel parts include: legs

• 16 gauge galvanized steel parts include: base

• 12 gauge stainless steel parts include: hinges, hinge brackets, and lock brackets

Standard Features

Specifications

FV__-_ _ (__)

Door Style:

B = Black vinyl clad U = Unlaminated L = Laminated S = Stainless G = Glass X = Stainless Glass Y = Laminated Glass

Top Style:

N = No finished top L = Laminated S = Stainless

Size:

24 = 24" One Door 48 = 48" Two Door

Door Hinge Location:

(from left to right)

L = Left or R = Right

A family company manufacturing in the USA

NSF standard 7 listing for open food storage

4004503 Conforms to ANSI/UL STD 471

Certified to CSA STD C22.2 No. 120

FV48-XS(LR)

FV24-SS(L)

• Self-contained high capacity refrigeration system that is NSF Standard 7 listed for open food storage

• Digital thermostat control with automatic defrost is easily visible

• Removable refrigeration module for easy maintenance

• All stainless steel interior is designed to accommodate two full rows of long neck beer bottles

• Includes LED interior lights with on/off switch

• Completely front venting - can be built into a back bar or used as a free standing unit

• Galvanized steel sub top (available with stainless steel or laminated finished top)

• Stainless steel sides

• Automatic condensate evaporator

• Foamed-in-place insulation

• Six foot grounded cord and plug (exits at rear)

• 180° swinging doors

Administrator

B16

17 5/8"

21" 180°

SWING

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

48"

1 1/8"

25 1/4"22 3/4"25 1/4"

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

35"

24"

2"

48"

44"

35"

COMPRESSOR

COMPARTMENT

20"

21"

DOOR

OPENING

17 5/8"

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

24"

20"

17 5/8" 2"

25 1/4"

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

DOOR

OPENING

COMPRESSOR

COMPARTMENT

35"

21"

20"

Dimensional Information

FV24

Self-Contained Front Venting Coolers

5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

FV48

Side View All Models

Model Capacity:

12 oz. bottle

Refrigeration Voltage Amps

FV24 4.6 cases 1/10 H.P. / R134a

120v / 60 Hz / 1 phase

2.15 full load

FV48 10.3 cases 1/6 H.P. / R134a

120v / 60 Hz / 1 phase

3.25 full load

Plan View Front Elevation

Plan View Front Elevation

Administrator

B16

Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

AIA#

SIS#

Standard Features

Specifications

Rev. 04-11-135.04

BT-4-SSR

BT-10-MFR

• All stainless steel construction (brass is optional)

• Integral surface mount drain pan with lift-out perforated inserts

• 1/4″ shanks with 3/16″ restriction lines

• Available in grainline stainless, mirror finish stainless, or polished brass

• Available with insulated cold plate assembly for recirculating system

• Available without drain pan (specify suffix ‘-LD’ on the model number)

• Available in 4,5,6,8,10 and 12 faucet sizes

• Stainless and mirror finish models include all stainless steel faucets and shanks

• Available with wine faucets (specify number and location when ordering)

• Foamed-in-place insulated column for extra rigidity

• Unique internal support system for solid mounting

• Base plate serves as template for hole cutting

BT- -

Finish:

SS = Stainless steel MF = Mirror finish PB = Polished brass

Size:

Specify the number of faucets from 4,5,6,8,10,12.

Tee Towers

Drains

• Drain pan models - 1/2″ tailpiece Materials

• 20 gauge stainless steel or brass parts include: head, column, drain pan, and perforated inserts

• 16 gauge galvanized steel parts include: subsurface head stiffener and base plate

• 11 gauge stainless steel parts include: inner column base and top plate and tower head mounting plate Shank Sizes

• 1/4″ I.D. with 3/16″ fittings

NOTE: Faucet handles not included.

A family company manufacturing in the USA

Glastender BT-4-SS Item#:B17

The Ahwahnee Page: 27

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com Printed in USA

Tee Towers

1-1/4"

4-3/4"

9-3/4"

B

5" 12"

B

C

4-3/4"

9-3/4"

10-1/4"

A

12"

A

1-1/4" 5"

5"

15-5/8"

SINGLE COLUMN TEE TOWERS

NUMBER OF

FAUCETS

"A"

WIDTH

14" 17" 20"

DOUBLE COLUMN TEE TOWERS

FRONT ELEVATION PLAN VIEW

SIDE ELEVATION

FRONT ELEVATION PLAN VIEW

1/2" DRAIN

12"

NUMBER OF

FAUCETS

"B"

WIDTH

26" 32" 38"

"C"

WIDTH

12" 15" 18"

NOTE: Faucet handles not included.

Glastender BT-4-SS Item#:B17

The Ahwahnee Page: 28

Front Venting Coolers One and Two Door

Self-Contained

Printed in USA Rev. 03-21-13 Specifications subject to change without notice. For current specifications please visit our website.

Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax 989.752.4444 www.glastender.com

Approval/Notes:

Project:

Item #: Qty:

Model #:

4.15

AIA#

SIS#

Electrical

• 120V, 1 phase, 60 Hz, FV24 - 2.15 full load amps, FV48 - 3.25 full load amps

• Dedicated 15 amp circuit is required

• Includes a 6 foot grounded cord and plug which exits the back of refrigeration compartment

Refrigeration

• FV24 - 1/10 HP, FV48 - 1/6 HP, R134a refrigerant

Operating Range

• 34º F to 40º F

Plumbing

• Automatic condensate evaporator. No drain connection required

Shelving

• One adjustable coated shelf and one bottom coated rack per door included

Legs

• 1-5/8″ diameter

• Stainless steel bullet feet

Materials

• 22 gauge stainless steel parts include: interior floor, walls, ceiling, front of cabinet, and evaporator housing

• 20 gauge stainless steel parts include: sides and optional top

• 22 gauge black vinyl-clad parts include: standard door(s), and compressor compartment cover

• 22 gauge galvanized steel parts include: exterior sub-top and back

• 16 gauge stainless steel parts include: legs

• 16 gauge galvanized steel parts include: base

• 12 gauge stainless steel parts include: hinges, hinge brackets, and lock brackets

Standard Features

Specifications

FV__-_ _ (__)

Door Style:

B = Black vinyl clad U = Unlaminated L = Laminated S = Stainless G = Glass X = Stainless Glass Y = Laminated Glass

Top Style:

N = No finished top L = Laminated S = Stainless

Size:

24 = 24" One Door 48 = 48" Two Door

Door Hinge Location:

(from left to right)

L = Left or R = Right

A family company manufacturing in the USA

NSF standard 7 listing for open food storage

4004503 Conforms to ANSI/UL STD 471

Certified to CSA STD C22.2 No. 120

FV48-XS(LR)

FV24-SS(L)

• Self-contained high capacity refrigeration system that is NSF Standard 7 listed for open food storage

• Digital thermostat control with automatic defrost is easily visible

• Removable refrigeration module for easy maintenance

• All stainless steel interior is…