N6945022R0062_0006.pdf

NAVFAC ENGINEERING SYSTEMS COMMAND SE

PWD MERIDIAN

229 ALLEN ROAD, BLDG 427

NAS MERIDIAN

MERIDIAN MS 39309-5427

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

N6945022R0062, Meridian Grounds and Landscaping Services

See Block 14 Continuation Page on page 2

1. CONTRACT ID CODE PAGE OF PAGES

J 1 17

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 24-Jun-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6945022R0062

X 9B. DATED (SEE ITEM 11)

20-Apr-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

24-Jun-2022

CODE

NAVFAC ENGINEERING SYSTEMS COMMAND SE

FSC-BOS

BUILDING 903, PO BOX 30

JACKSONVILLE FL 32212-0030

N69450 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE N69450

FACILITY CODECODE

EMAIL:TEL:

N6945022R0062

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0006

This amendment is issued to make the following changes:

1. Contract Line Item Numbers (CLINs) – The extended descriptions of the Non-Recurring CLINs have been updated to reflect the addition of Non-Recurring Work ELIN X723 Grubbing (X indicates all periods of performance). The “PRICING OF CLINS” and “FEDMALL” sections of the RFP have been updated accordingly. A conformed copy of the CLINs is provided via attachment under file name N6945022R0062_Conformed CLINs_0006.pdf.

2. Performance Work Statement (PWS) – The PWS has been updated. Changes within the attachment are shown in red strikethrough for deletions and blue underline for additions. The revised PWS is provided via attachment under file name N6945022R0062_SectionC_PWS_0006.pdf. A summary of the revised spec items is as follows:

a. Annex 0200000 – Management and Administration, Spec Item 2.7.3 Service Contract Reporting (SCR) has been deleted – Page 18 of 46

b. Sub-annex 1503050 – Grounds Maintenance and Landscaping, Spec Item 3 Recurring Work has been updated – Page 38 of 46

3. Attachments – The Attachments have been revised as follows:

a. The Section J Technical Attachment has been updated. Changes within the attachment are shown in red strikethrough for deletions and blue underline for additions. The revised Section J Technical Attachment is provided via attachment under file name N6945022R0062_SectionJ_Technical Attachment_0006.pdf. A summary of the revisions is as follows:

i. Attachment J-1502000-03 Common Output Level Standards (COLS) has been corrected to attachment number J-1503050-03 and revised – Pages 18-19 of 25

ii. Attachment J-1503050-04 Site Maps has been updated to add reference to J-1503050-04C JWOLF Grounds Map – Page 20 of 25

iii. Attachment J-1503050-05 Grounds Inventory and Site Map References has been revised to correct the NAS Meridian Grounds Map Key, update the Customer names to reflect the customers listed in the ELINs, and revise the Improved Grounds Areas and Operational Areas inventories – Pages 21-24 of 25

b. Attachment J-0200000-05 ELINs has been revised. Changes within the attachment are shown in strikethrough for deletions and blue font for additions. The updated ELIN Pricing Attachment is provided under file name N6945022R0062_J-0200000-05_ELINs_0006.xls. A summary of the changes is as follows:

i. Added ELIN X723 Grubbing (X indicates all periods of performance) in all of the Non- Recurring work tabs.

ii. Corrected the Estimated Quantity column in the “BASE PERIOD NON-RECURRING” tab to reflect the quantities for 12 months of performance vs. 6 months.

iii. Deleted the “5TH OPTION PERIOD RECURRING” and “5TH OPTION PERIOD NON- RECURRING” tabs to align the ELIN Pricing Attachment with the CLINs and periods of performance in the solicitation.

iv. Corrected the Quantity column in the “52.217-8 OPTION RECURRING” tab to reflect a 6-month option period of performance vs. 12 months.

v. Corrected the prefix of the ELIN numbers in the “52.217-8 OPTION NON-RECURRING” tab from G to F.

vi. Updated the header and total rows in several tabs to reference the correct periods of performance.

c. Attachment J-1503050-04A ELIN Acreage has been updated. The revised ELIN Acreage attachment is provided under file name N6945022R0062_J-1503050-04A_ELIN_Acreage_0006.xlsx. A summary of the changes is as follows:

i. Corrected the Spec Item and Description columns to match the ELIN Pricing Attachment.

ii. Corrected the Acreage listed for each Sub-ELIN to reflect the acreages identified in the J- 1503050-05 grounds inventories.

d. Attachment J-1503050-04C Joe Williams OLF (JWOLF) Grounds Map has been added and is provided under file name N6945022R0062_J-1503050-04C_JWOLF Grounds Map.pdf.

4. Instructions to Offerors have been revised as follows:

a. The Proposal Delivery instructions have been revised to update the proposal delivery POC from Reuben Amarh to Macie Higginbotham. Changes within this section are annotated in red font.

5. The proposal due date is extended to 2:00 PM EDT, Thursday, 7 July 2022.

All other terms and conditions remain unchanged.

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 30-Jun-2022 02:00 PM to 07-Jul-2022 02:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The CLIN extended description has changed from:

Non-Recurring Grounds Maintenance and Landscaping Services in accordance with the Performance Work Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) A700 through

A722 from ELIN Pricing Attachment, worksheet tab - CLIN 0002 - Base Period Non-Recurring.NOTE: Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

To:

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) A700 through A723 from ELIN Pricing Attachment, worksheet tab - CLIN 0002 - Base Period Non-Recurring. NOTE: Please

CLIN 0004

Non-Recurring Grounds Maintenance and Landscaping Services in accordance with the Performance Work Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) B700 through B722 from ELIN Pricing Attachment, worksheet tab - CLIN 0004 1st Option Period Non-Recurring.NOTE: Please

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) B700 through B723 from ELIN Pricing Attachment, worksheet tab - CLIN 0004 1st Option Period Non-Recurring. NOTE: Please

CLIN 0006

Non-Recurring Grounds Maintenance and Landscaping Services in accordance with the Performance Work Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) C700 through C722 from ELIN Pricing Attachment, worksheet tab - CLIN 0006 - 2nd Option Period Non-Recurring.NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) C700 through C723 from ELIN Pricing Attachment, worksheet tab - CLIN 0006 - 2nd Option Period Non-Recurring. NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

CLIN 0008

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) D700 through D722 from ELIN Pricing Attachment, worksheet tab - CLIN 0008 - 3rd Option Period Non-Recurring.NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) D700 through D723 from ELIN Pricing Attachment, worksheet tab - CLIN 0008 - 3rd Option Period Non-Recurring. NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

CLIN 0010

Non-Recurring Grounds Maintenance and Landscaping Services in accordance with the Performance Work Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) E700 through E722 from ELIN Pricing Attachment, worksheet tab - CLIN 0010 - 4th Option Period Non-Recurring.NOTE: Please

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) E700 through E723 from ELIN Pricing Attachment, worksheet tab - CLIN 0010 - 4th Option Period Non-Recurring. NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

CLIN 0012

Non-Recurring Grounds Maintenance and Landscaping Services in accordance with the Performance Work Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) F700 through F722 from ELIN Pricing Attachment, worksheet tab - CLIN 0012 - 52.217-8 Option Period Non-Recurring.NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

Statement and all applicable attachments. Fill in with total for Exhibit Line Item Numbers (ELINs) F700 through F723 from ELIN Pricing Attachment, worksheet tab - CLIN 0012 - 52.217-8 Option Period Non-Recurring. NOTE:

Please ensure you are using the most current version of this Attachment. Check all amendments for updates.

The following have been modified:

ADDENDUM

TYPE OF CONTRACT

Award of this solicitation will result in a facilities support indefinite-quantity contract with recurring work / firm fixed price (FFP) and non-recurring work / indefinite delivery indefinite quantity (IDIQ) provisions.

SERVICE REQUIREMENTS

This contract will provide for grounds maintenance and landscaping services under Sub-annex 1503050 Grounds Maintenance and Landscaping at Naval Air Station (NAS) Meridian, Mississippi and outlying areas. The outcomes for this acquisition are consistent with the Federal Acquisition Regulation (FAR) 37.101 definition of service contracts.

COMPETITION ENVIRONMENT

This contract is solicited as 8(a) small business set-aside.

NAICS CODE

The NAICS code is 561730, Landscaping Services.

PRIOR CONTRACT INFORMATION

The contract issued as a result of this solicitation will replace contract N6945017D1809, which is due to expire on 4 October 2022. That contract was awarded to William Sanjo, a Joint Venture with Williams CPS Firm, PLLC. This is provided for informational purposes only.

Period of Performance Recurring Non-Recurring Total

Base Period 5 Oct 2017 – 4 Apr 2018 $393,000.00 $162,290.50 $1,454,030.00

Option Period 1 5 Apr 2018 – 4 Apr 2019 $786,000.00 $324,812.50 $1,491,897.19

Option Period 2 5 Apr 2019 – 4 Apr 2020 $786,000.00 $324,312.50 $1,543,159.19

Option Period 3 5 Apr 2020 – 4 Apr 2021 $786,000.00 $345,002.50 $1,614,925.99

Option Period 4 5 Apr 2021 – 4 Apr 2022 $845,328.00 $345,002.50 $1,614,925.99

Option Period 5 5 Apr 2022 – 4 Oct 2022 $422,644.00 $177,125.00 $599,769.00

Total $4,018,972.00 $1,678,545.50 $5,697,517.50

PRICING OF CLINS

The contract pricing is structured into 12 Contract Line Item Numbers (CLINs). The base period is covered by CLINs 0001 and 0002. Each of the four one-year option periods is likewise covered by two CLINs. The FFP / recurring work base period requirement and the overall guaranteed minimum for the contract is CLIN 0001.

CLINs 0003, 0005, 0007, 0009 and 0011 account for the recurring work requirements in each option period.

CLINs 0002, 0004, 0006, 0008, 0010 and 0012 contain non-recurring work requirements that are pre-priced as part of your offer.

The CLINs are supported by Exhibit Line Item Numbers (ELINs). Before pricing the CLINs, complete the ELIN Attachment Excel spreadsheet. Submit the completed ELIN spreadsheet electronically with your quote in Excel (Microsoft Office version 2016 compatible) format. The spreadsheet contains 12 tabs of ELINs, each corresponding to a CLIN, which must be completed. The tabs are identified, for example, as: “CLIN 0001 – Base Period Recurring, “CLIN 0002 – Base Period Non- Recurring, “CLIN 0003 - 1st Option Period Recurring, “CLIN 0004 - 1st Option Nonrecurring”, etc. ELINs with prefix “A” support the Base Period, ELINs with prefix “B” support Option Period 1, ELINs with prefix “C” support Option Period 2, ELINs with prefix “D” support Option Period 3, ELINs with prefix “E” support Option Period 4, and ELINs with prefix “F” support the FAR 52.217-8 Option Period pricing. Therefore, the total of ELINs A001 through A002 will be the amount you should enter in CLIN 0001. The total of A700 through A723 will be the amount you should enter in CLIN 0002. The total of B001 through B002 will be the amount you should enter in CLIN 0003. The total of B700 through B723 will be the amount you should enter in CLIN 0004. Continue pricing accordingly and make sure that the total of each tab of ELINs is equal to its corresponding CLIN value entered. The total of all ELINs should equal the total of CLINs

0001 through 0012.

MAXIMUM NOT TO EXCEED (NTE) AND MIN GUARANTEE

The maximum NTE value of an ordering period is the total of all the CLINs in that ordering period. The maximum or NTE value of the contract is the total value of all CLINs in the Schedule. Orders shall not be made that exceed the maximum NTE value for any ordering period. The maximum NTE value of an ordering period and of the contract may be increased by written modification to the contract in conjunction with any modification that increases the value of an existing task order that is authorized by a contract clause. Orders in excess of the estimated quantity set forth for any particular CLIN shall not be exceeded without the Contractor’s agreement which shall be indicated by signing or beginning performance of the order.

Concurrently with the award of the basic contract, the Government intends to issue a task order to obligate the contract minimum guarantee for:

CLIN 0001, Base Period Recurring Work;

Minimum guarantees do not apply to the option periods.

PERFORMANCE WORK STATEMENT (PWS)

This is a performance-based contract which incorporates performance-based specifications. The files for the PWS are provided as the following attachment posted on the SAM website at https://sam.gov:

N6945022R0062_SectionC_PWS_0006.pdf.

CONTRACT TERM

The estimated start date is 05 October 2022. The initial contract term of performance is for one year (12 months).

The entire duration of the contract if all options are exercised is five years (60 months total). There are four option periods and each option period has a term of performance of one year (12 months). If the Government requires a shorter term or exercises an option for a period shorter than 12 months, the proposed monthly ELIN prices will be used as the basis for establishing the reduced term. The Government may extend the term of the contract in accordance with FAR 52.217-9, Option to Extend the Term of the Contract incorporated into the resulting contract.

Additionally, the Government may need to extend the performance period beyond the established 60 months stated above. FAR 52.217-8, Option to Extend Services provides the regulatory authority to extend contract performance up to an additional six months.

TRANSITION PERIOD

The Government intends to make award by 31 August 2022 to allow the successful offeror 30 days to mobilize and transition into place. The current contractor will be expected to commence demobilization and support the transition of the follow-on contractor 30 days prior to completion of the contract term.

PRE-PERFORMANCE CONFERENCE

Within 20 days of contract award, prior to commencement of the work, the contractor will meet in conference with representatives of the Contracting Officer, at a time to be determined by the Contracting Officer, to discuss and develop mutual understanding relative to scheduling and administering work.

DELIVERABLES

The files for the deliverables are provided as the following attachment posted on the SAM website at https://sam.gov: N6945022R0062_SectionF_Deliverables.pdf.

NOTE: Deliverables requirements under the contract should be submitted to the Government via Electronic format. The file document(s) format shall be compatible with the most recent Government installed Microsoft Office version (currently 2016) and an unprotected version. The documents may be submitted via email as 'attachment(s)', file size permitting. Else, the deliverables should be submitted on a CD-ROM.

CONTRACT ADMINISTRATION

Upon award, contract administration shall be assigned to:

NAVFAC Southeast PWD Meridian 229 Allen Road, BLDG. 427 Meridian, MS 39303-5427

BLANKET TASK ORDER

The Government reserves the right to issue Blanket Task Orders (BTOs) with bulk funding for non-recurring work; however, performance of work shall not commence until authorization is received from the Contracting Officer. Each issued BTO and subsequent work authorization will include a firm fixed-price not-to-exceed amount which can only be altered via BTO modification.

PERFORMANCE ASSESSMENT

Contractor’s performance will be evaluated using the respective contractor performance evaluation report entry system located on the website http://www.cpars.gov/. Prior to commencement of work the contractor is required to provide the government with the name, phone number and e-mail address of the “Contractor’s Representative” that will be responsible for receipt and review of draft performance evaluations prepared by the government in the appropriate system. It is the contractor’s responsibility to keep this contact information current.

PAYMENT INSTRUCTIONS

**FOR GOVERNMENT USE ONLY**

The payment office shall allocate and record the amounts paid to the accounting classification citations in the contract based on the type of payment request submitted (see DFARS 252.232-7006) and the type of effort using the table provided at https://www.acq.osd.mil/dpap/dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions.

COR

Contracting Officer Representative: TBD NAVFAC Southeast PWD Meridian 229 Allen Road, BLDG. 427 Meridian, MS 39303-5427

HISTORICAL AND ARCHAEOLOGICAL RESOURCES

Carefully protect in-place and report immediately to the Contracting Officer historical and archaeological items or human skeletal remains discovered in the course of work. Stop work in the immediate area of the discovery until directed by the Contracting Officer to resume work. The Government retains ownership and control over historical and archaeological resources.

FEDMALL

The following ELINs will be available for ordering via FedMall:

ELIN Short Description X703 Special Event Grass Cutting X704 Special Event Edging X705 Perimeter Area Grounds Maintenance (Mowing) X706 Perimeter Fence Grounds Maintenance X707 Field Mowing X708 Tree Removal Large 18" and above, Tree and Stump removal X709 Tree Removal Medium 6" DBH up to 18" Tree and Stump Removal X710 Tree Removal Small up to 6" Tree and Stump Removal

X indicates all periods of performance

ORDERING

In accordance with FAR clause 52.216-18, Ordering, this authorizes additional methods for issuance of delivery or task orders under the resulting contract. Orders may be issued orally, by facsimile, and/or by electronic commerce methods.

ORDER LIMITATIONS

Section I, Contract Clauses, incorporates FAR clause 52.216-19, Order Limitations. This clause is not applicable to the recurring work and/or the Government-wide Commercial Purchase Card (GCPC) Program.

DFARS 211.106

The Contractor shall be responsible for furnishing to each employee and for requiring each employee to display identification as a Contractor employee (i.e. introduction, badge, other identification) as may be approved and directed by the KO. Distinction as a Contractor employee should be available at all times including in meetings with Government personnel, telephone conversations, and in formal and informal written correspondence.

Prescribed Government identification cards shall be immediately delivered to the KO for cancellation upon release of any employee.

SCHEDULE OF DEDUCTIONS

Unit prices provided by the successful offeror may be utilized as the basis of deductions pursuant to the clause at 52.246-4, Inspection of Services – Fixed-Price and Consequences to Perform.

AUTHORITY

1. No person other than the Contracting Officer has authority to bind the Government with respect to this contract.

2. No action or omission of any government employee or representative other than the Contracting Officer shall increase or decrease the scope of this contract or shall otherwise modify the terms and conditions of this contract.

3. In no event shall any of the following be effective or binding on the Government or imputed to the Contracting

Officer with respect to this contract:

(a) An understanding or agreement between the Contractor and anyone other than the Contracting Officer;

(b) A purported modification or change order issued by anyone other than the Contracting Officer;

(c) A promise by anyone other than the Contracting Officer to provide additional funding or make payments; or

(d) An order, direction, consent, or permission from anyone other than the Contracting Officer to:

(i) Incur costs in excess of a specified estimated cost, allotment of funds, or other ceiling; or

(ii) Expend hours in excess of a specified level of effort.

X711 Stump and Above Ground Root Removal (All sizes) X712 Shrub Establishment (1-gallon) X713 Shrub Establishment (5-gallon) X714 Shrub Pruning (Under 4') X715 Shrub Pruning (Over 4') X716 Shrub Removal (Under 4') X717 Shrub Removal (Over 4') X718 Fertilization X719 Establish New Mulched Beds and Flower Beds X720 Severe Storm Debris X721 Tree Maintenance X722 Bush Hogging X723 Grubbing

SUBSTITUTIONS OF KEY PERSONNEL

The Contractor shall provide complete resumes for proposed substitutes, and any additional information requested by the Contracting Officer. Proposed substitutes should have comparable qualifications to those of the persons being replaced. The Contracting Officer will notify the Contractor within 15 days after receipt of all required information of the consent on substitutes. No change in unit prices may occur as a result of key personnel substitution.

CONSEQUENCES TO PERFORM

The Contractor shall perform all of the contract requirements. The Government will inspect and assess Contractor performance in accordance with FAR 52.246-4, INSPECTION OF SERVICES - FIXED PRICE The Government will require re-performance, withhold payment, or seek other suitable consideration for unsatisfactory or non-performed work. When defects can’t be corrected by re-performance, the Government may reduce the price to reflect the reduced value of services performed.

(a) PROCEDURES. In the case of unsatisfactory or non-performed work, the Government:

1. may give the Contractor written notice of observed deficiencies prior to withholding payment for unsatisfactory or non-performed work and/or assessing liquidated damages. Such written notice shall not be a prerequisite for withholding payment for non-performed work. The Government may specify, as provided for below, that liquidated damages can be assessed against the Contractor. Such liquidated damages are to compensate the Government for administrative costs and other expenses resulting from the unsatisfactory or non-performed work.

2. may, at its option, allow the Contractor an opportunity to re-perform the unsatisfactory or non- performed work, at no additional cost to the Government. In the case of daily work, corrective action must be completed within 4 hours of notice to the Contractor. In the case of other work, corrective action must be completed within 24 hours of notice. In addition, the Government can assess liquidated damages, as referenced above, in the amount of 10 percent of the value of all observed defects. The original inspection results of the Contractor’s work will not be modified upon re-inspection. However, the Contractor will be paid for satisfactorily re-performed work.

3. shall withhold from the Contractor’s invoice all amounts associated with the unsatisfactory or non-performed work at the prices set out in the Schedule or provided by other provisions of this contract, unless the Contractor is required to re-perform and satisfactorily complete the work. In addition, the Government can assess liquidated damages, as referenced above, in the amount of 10 percent of the value of all observed defects.

4. may, at its option, perform the work by Government personnel or by other means. The Government will reduce the amount of payment to the Contractor, by the amount paid to any Government personnel (based on wages, retirement and fringe benefits) plus material, or by the actual costs incurred to accomplish the work by other means. If the actual costs cannot be readily determined, the prices set out in the Schedule will be used as the basis for the deduction. In addition, the Government can assess liquidated damages, as referenced above, in the amount of 10 percent of the computed cost.

(b) The Contractor is responsible for maintaining an effective Quality Control Program during the course of the contract. Failure to maintain adequate quality control may result in Termination for Default.

(c) Re-performance by the Contractor does not waive the Government’s right to terminate for nonperformance in accordance with FAR clause 52.249-8, DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) of Section I and all other remedies for default as may be provided by law.

ESTIMATING NONPERFORMED WORK

In the event the price of non-performed or unsatisfactory work cannot be determined from the prices set out in the Schedule, or on the basis of the actual cost to the Government, estimating methods may be used to determine an amount, which reflects the reduced value of services performed. The Government may estimate the cost using wage rates and fringe benefits included in the wage determinations included in the contract, Government estimates of the Contractor’s overhead and profit rates, and Government estimates of material costs if applicable. Liquidated damages, to compensate the Government for administrative costs and other expenses resulting from the nonperformed or unsatisfactory performance, will be calculated in accordance with the CONSEQUENCES OF

CONTRACTOR’S FAILURE TO PERFORM REQUIRED WORK.

ATTACHMENTS

List of Documents, Exhibits, and other Attachments for this requirement which are posted on the SAM website at https://sam.gov in the Contract Opportunities.

The documents are posted as individual attachments as indicated below:

1. Performance Work Statement – N6945022R0062_SectionC_PWS_0006.pdf

2. Deliverables – N6945022R0062_SectionF_Deliverable.pdf

3. Section J Technical Attachment – N6945022R0062_SectionJ_Technical Attachment_0006.pdf

4. ELIN Pricing Attachment – N6945022R0062_J-0200000-05_ELINs_0006.xls

5. NAS Meridian Site Map – N6945022R0062_ J-1503050-04B_Site Map.pdf

6. NAS Meridian Base Access Information – N6945022R0062_DBIDS Access.docx

7. Contractor Significant Incident Report (CSIR) – N6945022R0062_J-0200000-03A_Contractor Significant

Incident Report (CSIR).docx

8. CNRSE Instruction 4101.1 – N6945022R0062_J-0200000-04_CNRSE_INST_4101.1B.pdf

9. ELIN Acreage – N6945022R0062_J-1503050-04A_ELIN_Acreage_0006.xlsx

10. Past Performance Questionnaire (PPQ) – N6945022R0062_Past Performance Questionnaire.doc

11. SECNAV 5512/1 Form – N6945022R0062_SECNAV5521_Base Access Form.pdf

12. Hazardous Material Log – N6945022R0062J-0200000-03B_Hazardous Material Inventory Log.docx

13. Corporate Experience Project Data Sheet – N6945022R0062_Corporate Experence Project Data Sheet.docx

14. AMAG Form – N6945022R0062_AMAG Form.xls

15. Wage Determination 2015-5169 (Rev.-18). Applies to all other service employees (those not performing bargaining unit work/functions) performing work on the contract – N6945022R0062_Wage Determination.pdf

16. Site Visit Itinerary – N6945022R0062_Site Visit Itinerary.pdf

17. JL-1 Labor Hours worksheet – N6945022R0062_JL1_Labor_Hours.xlsx

18. Site Visit Brief – N6945022R0062_Site Visit Brief_0001.pdf

19. Site Visit Sign-In Sheet – N6945022R0062_Site Visit Sign-In Sheet_0001.pdf

20. Government Pre-Award Inquiry Form (GPIF) – N6945022R0062_GPIF_0001.xls

21. Responses to Government Pre-award Inquiries (GPIs) – N6945022R0062_GPI_Responses.pdf

22. Collective Bargaining Agreement (CBA) between Williams-Sanjo, JV and International Union of

Operating Engineers Local 624, effective 12/1/2020 through 11/30/2024. Applies to all service employees performing identifiable bargaining unit work/functions covered by the CBA – N6945022R0062_CBA_IUOE_624.pdf

23. Joe Williams OLF (JWOLF) Grounds Map – N6945022R0062_J-1503050-04C_JWOLF Grounds Map.pdf

INSTRUCTION TO OFFERORS

PERIOD OF ACCEPTANCE

Due to the evaluation and review requirements for this procurement, the offeror agrees to hold its offer firm for 120 calendar days from the date specified for receipt of offers.

PROPOSAL DELIVERY

Proposals shall be clearly marked “SOLICITATION N6945022R0062 MERIDIAN GROUNDS”, and sent to the following address:

U. S. Mail: Other Delivery Services: Hand-Delivery

NAVFAC SE NAVFAC SE NAVFAC SE

FSC-BOS Division Acquisition Core (ATTN: Macie Higginbotham)

FSC-BOS Division Acquisition Core (ATTN: ATTN: Macie Higginbotham)

Bldg. 903 Lobby Area Yorktown Ave

P.O. Box 30 Building 903, Yorktown Avenue NAS Jacksonville

NAS Jacksonville NAS Jacksonville Jacksonville, FL 32212-0030 Jacksonville, FL 32212-0030 Jacksonville, FL 32212-0030 See instructions below. Contact

Contract Specialist at (904) 542-8817 upon arrival at the building for proposal delivery

No other markings shall be used on the envelope or package(s). Proposals not received at the above address on or before the hour and date set for the receipt of proposals shall be subject to the provisions of FAR Clause 52.215-1 Instructions to Offerors -- Competitive Acquisition (JAN 2004).

FOR HAND-DELIVERED PROPOSALS:

Due to increased security at all military installations, offerors who do not currently have a valid Contractor’s ID issued by the Department of Defense (DoD), must allow sufficient time to obtain a one-day pass to permit entry to the base. In accordance with NAS Jacksonville security regulations, all prospective visitors and contractor personnel are hereby notified that in order to obtain a one-day visitor’s pass the person must submit a AMAG form at least five days prior to the date of the visit. The AMAG form shall be electronically forwarded to Macie Higginbotham at macie.d.higginbotham.civ@us.navy.mil.

One-day passes must be obtained at the Pass and ID Office on Yorktown Avenue, Building 9. All visitors must bring with them form SECNAV 5512/1 (provided as attachment N6945022R0062_SECNAV5512 Base Access Form.pdf) on the day of the visit along with two (2) forms of identification as required.

It is imperative that all potential offerors adhere to this notice in order to avoid delay in submitting your proposal.

Also, be advised by this notice that the level of security at NAS Jacksonville may change at any time. As the level of security heightens, the amount of time required to gain access to the base also increases. Please contact the contract specialist or the contracting officer, via the email address(es) above, to coordinate hand-delivered proposals.

ADDITIONAL RFP FILES

RFP files are posted on the SAM website at https://sam.gov in the Contract Opportunities Section as mandated by our agency. It is the sole responsibility of the offeror to obtain the RFP files, along with any amendments, from this website.

GOVERNMENT PRE-AWARD INQUIRY FORM

All Government Preaward Inquiries (GPIs)/Requests for Information shall be submitted in writing to the Contract Specialist, Reuben Amarh, at Reuben.a.amarh.civ@us.navy.mil (with a copy to Cari Fiebach at cari.l.fiebach@us.navy.mil) prior to the Government cutoff date of 2:00 PM EDT, Tuesday 10 May 2022.

All questions must be submitted on the provided Government Preaward Inquiry Form (GPIF) provided as an attachment on the SAM.gov website under file name N6945022R0062_GPIF.xls. It is the offeror’s responsibility to verify receipt of all questions with the Contract Specialist.

INCURRED EXPENSES

The Government is not responsible for any costs incurred or associated with preparation and submission of a proposal in response to this solicitation.

NO ALTERNATE PROPOSALS

Neither multiple proposals, nor alternate or alternative proposals will be considered in the evaluation.

INFORMATIONAL SUBCLINS

Informational SubCLINs will be incorporated at the time of award with appropriate funding/lines of accounting by customer. These SubCLINS represent funding for each CLIN by customer. The contractor shall not submit totals for SubCLINs.

PHASE-IN AND PHASE-OUT

Pricing shall include applicable Phase-In and Phase-Out costs. There is no separately priced CLIN for Phase-In and Phase-Out.

FULLY LOADED PRICING

All pricing, including recurring and non-recurring work ELIN pricing, shall be fully loaded. No other allocations, fees, O/Hs, G&A, and profits will be applied when an option is exercised or work is ordered.

UNIT PRICE ADJUSTMENTS IN OPTION PERIOD

This contract incorporates a Service Contract Labor Standards Wage Determination and Collective Bargaining Agreement (CBA) from the previous service provider. In accordance with subparagraph (b) of the Fair Labor Standards and Service Contract Labor Standards—Price Adjustment Clause, FAR 52.222-43, offerors shall not include escalation of wage and fringe benefit rates in the recurring work CLIN/ELIN prices for Service Contract Labor Standards (formerly known as the Service Contract Act (SCA) of 1965) covered employees in the option periods of performance. Wage and fringe benefit rates used for the base period recurring work will be used in pricing labor costs for all periods of performance in the option years. In accordance with the referenced clause, the contractor may be entitled to an adjustment in contract price for the recurring work CLINs only when a new Service Contract Labor Standards wage determination or CBA is modified into the contract and it affects wages and fringe benefits of covered employees. Offerors may include escalation of wage and fringe benefit rates in the non-recurring work CLIN/ELIN prices for the option periods of performance.

SITE VISIT INSTRUCTIONS

The site visit will be conducted on Tuesday, 3 May 2022. The Government will provide transportation from the designated location. Government transport vehicles will depart according to the times and locations specified on the itinerary on the morning of the site visit. The itinerary is provided as file name N6945022R0062_Site_Visit_Itinerary.pdf on the SAM website.

Arrangements and Special Instructions for the site visit are indicated below. Any other site related information will be provided via amendment.

Date of visit: Tuesday, 3 May 2022 Time/Meeting Location: See Site Visit Itinerary

NOTICES AND SPECIAL INSTRUCTIONS TO ALL CONTRACTOR SITE VISIT PARTICIPANTS

1. All participants may be subject to scan or search. Searches/scans may constitute use of guard dogs and/or other detection devices, instruments or security methods/procedures. Security personnel and guard dogs could be present at various locations during the site visit.

2. No participant will be allowed to carry any of these items on the base: cameras or camera phones, knives or weapons, packages or briefcases.

3. No foreign nationals will be permitted to participate in the site visit.

4. All contractors must comply with the completion and submission of the Department of the Navy Local Population ID Card/Base Access Pass Registration, SECNAV 5512/1 form (provided as file name N6945022R0062_SECNAV5512.pdf) to gain access to the various locations for the site visit. The forms must be completed and returned to Jason Clayton at Jason.e.clayton.civ@us.navy.mil (with a copy to Reuben Amarh at Reuben.a.amarh.civ@us.navy.mil) by 2:00 PM EDT, Thursday, 25 April 2022.

5. All contractors must bring the completed Department of the Navy Local Population ID Card/Base Access Pass Registration, SECNAV 5512/1 form to gain access to the location for the site visit. NOTE: The Government will complete Block 25 on Page 1 of the SECNAV 5512/1 Form.

*Only cleared contractors will be allowed to participate in the site visit.

6. Should special accommodations such as handicapped bus/van access be required to attend the site visit, provide a "Request for Special Accommodations" letter identifying what specific accommodations are needed and how many individuals require these accommodations. This letter must be submitted via email no later than the due date of the SECNAV 5512/1 form. Early submission of requests is highly encouraged.

Every effort will be made to accommodate reasonable requests.

7. Each contractor is limited to three (3) participants.

8. Government transportation may be provided. Attendees should also be able to caravan to the sites, if necessary.

9. There will only be one scheduled site visit for this solicitation. Contractors will not be allowed access on any other dates to view the site.

10. All contractors shall meet at the designated location and time indicated on the itinerary.

11. A valid Government-issued photo identification will be required (driver’s license, passport, etc) for this site visit.

12. Controlled access points may not be available on the date of the site visit. All service requirements to include controlled access areas are identified in the solicitation.

13. Security personnel will be present for identification verification and issuance of the contractor visitor pass.

No questions will be answered at the sites. All questions should be submitted in writing to Reuben Amarh at Reuben.a.amarh.civ@us.navy.mil (with a copy to Cari Fiebach at cari.l.fiebach.civ@us.navy.mil) prior to the Government Pre-Award Inquiry (GPI) cutoff date of 2:00 PM EDT, Tuesday, 10 May 2022. All prospective offerors submitting GPI questions must be submitted on the GPI form (Provided as file name N6945022R0062_GPIF.xls).

CONTENT OF PROPOSALS

(a) PROPOSAL REQUIREMENTS. The responsibility determination, non-price proposal, and the price proposal shall be submitted in separate volumes. The non-price proposal shall not contain any pricing information. The non-price proposal presented by the offeror to whom the award is made will be incorporated into the contract at time of award.

(b) The offeror shall submit the following information:

(1) Responsibility Determination Binder: 2 (1 original and 1 copy) hard copies of the responsibility determination information. With the responsibility determination binder, submit the following:

a. Submit completed and signed Standard Form 1449 with the applicable Entity Identifier number and CAGE code of the offeror provided on the face of the SF 1449. Ensure the SF 1449 includes the appropriate name and address of any newly formed joint venture/partnership arrangement if applicable;

b. Submit acknowledgement of all amendments;

c. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.);

d. Submit individual representations and certifications if System for Award Management (SAM) representations and certifications are not complete in accordance with FAR 52.204-7;

e. Provide confirmation of most recent VETS-4212 filing or an explanation of the offeror’s exemption from this requirement;

f. The offeror shall provide the latest three complete fiscal year financial statements (at a minimum, balance sheet, income statement, and cash flow statement), certified by an independent accounting firm or at least by an authorized officer of the organization. If the offeror is a new joint venture or partnership, include the latest three complete fiscal year financial statements for each firm, certified by an independent accounting firm or at least by an authorized officer of the organization;

g. Submit evidence of availability of working/operating capital from an independent financial institution, which will be used for the performance of the resultant contract;

h. If joint venture or partnership arrangement is being proposed, include copies of agreements and letters of commitment signed by the appropriate individuals of each firm. Agreements must include company name, Entity Identifier number, address, point of contact, email address, phone number and fax number for the joint venture/partnership and each member of the joint venture/partnership. The agreements shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind the firm/joint venture/team/partnership. Offerors proposing significant subcontracts (subcontracts exceeding 10% of the total contract value) shall submit signed letters of commitment from the subcontractors which define the contractual relationship and identify contribution to the planned arrangement in terms of the type and proportion of work to be performed. For Joint Venture arrangements discuss the financial responsibilities among the companies;

i. Offerors shall submit plan in accordance with DFARS 252.237-7024 NOTICE OF

CONTINUATION OF ESSENTIAL CONTRACTOR SERVICES (OCT 2010);

j. Submit one Adobe PDF file of the entire Responsibility Determination information on two CDs filed inside the cover of the "Original" hard copy Responsibility Determination binder.

NOTE: Do not submit a USB flash/jump drive in lieu of CD;

k. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier. Colored font may be used for headers/footers, section headings and subheadings only; all other text will be black. Double-side printing is permitted; and

l. There is no page limitation on the responsibility determination submission.

(2) Price Proposal Binder: 2 (1 original and 1 copies) hard copies of the price proposal. With the price proposal, submit the following:

a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.);

b. Submit all Price factor requirements;

c. Submit one Excel file (ELINs) and one Adobe PDF file of the entire Price Proposal on two

CDs filed inside the cover of the "Original" hard copy Price Proposal binder. NOTE: Do not submit a USB flash/jump drive in lieu of CD.

d. Offerors shall submit pricing spreadsheet data (completed pricing for all CLINs and the ELINs Pricing Attachment) in hard copy, Adobe PDF, and in Excel (Microsoft Office Version 2016 compatible) format on a CD-ROM. Offerors shall utilize the ELIN pricing attachment provided to submit the ELIN Pricing data in the format provided. Formulas shall be traceable.

Failure to do so may be cause to render the offer non-responsive. Because the pricing evaluation will concentrate on the electronic files submitted, in the event of a discrepancy between the price proposal hard copies and the price proposal electronic copies, the price proposal electronic copies will take precedence.

e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier, with single line spacing. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-side printing is permitted; however, each side will be counted as one page for sections with page limitations. For larger spreadsheets, the offeror may submit 11 by 17 inch sheets that must be folded to fit within the binder, with printing on one side only; and

f. Offerors shall put company name on every pricing page; and

g. There is no page limitation on the pricing proposal.

(3) Non-Price Proposal Binder: 3 (1 original and 2 copies) hard copies of the non-price proposal. With the non-price proposal, submit the following:

a. Identify the company names, CAGE Code, and Entity Identifier for all team members and identify their role (prime, joint venture partner, significant subcontractor, subcontractor, etc.);

b. Submit all Non-Price factor requirements divided. Each Non-Price factor must have an individual tab divider;

c. Submit one Excel file (JL-1 Attachment) and one Adobe PDF file of the entire Non-Price Proposal on two CDs and filed inside the cover of the "Original" hard copy Non-Price Proposal binder. NOTE: Do not submit a USB flash/jump drive in lieu of CD. For the JL-1 Attachment, ensure data is submitted in hard copy, Excel (Microsoft Office Version 2016 compatible), and Adobe PDF formats on the above mentioned CD. In the event of a discrepancy between the JL-1 Attachment hard copies and the JL-1 Attachment electronic copies, the JL-1 Attachment electronic copies will take precedence. For the remainder of the Non-Price Proposal, in the event of a discrepancy between the hard copies and the electronic copies, the Non-Price proposal hard copies will take precedence.

d. State a clear acknowledgement within the beginning of the binder that nothing in the following proposal is meant to supersede or reduce any of the individual requirements to which the offer addresses. It is the Government’s intent to incorporate the offeror’s proposal into the final contract while at the same time eliminating any contradictory or conflicting requirements between the two. In the event of a conflict between any part or parts of the offer and part or parts of the requirement, the government has the right to selectively choose that part or those parts which are the more advantageous of the two.

e. Paper should be white, 8 ½ by 11 inches and have margins of 1 inch on all four sides. NOTE:

Margins in forms and attachments provided by the Government are exempt from the margin size requirement and shall be submitted in the format provided. All text (including text in all graphics, exhibits, tables, and headers/footers) will be in a font no smaller than 11 point, Times New Roman or Courier, with single line spacing. Colored font may be used for headers/footers, section headings, and subheadings only; all other text will be black. Double-side printing is permitted; however, each side will be counted as one page;

f. Offerors shall put company name on every Non-Price page, and

g. The non-price proposal submittal shall not exceed 100 pages. Pages exceeding this page limitation shall not be evaluated. Blank tab dividers, Past Performance Questionnaires, and Contractor Performance Assessment Reports will not count toward the page limitation.

(4) All binder covers and spine inserts will contain the solicitation number and title, the offeror’s name including individual point of contact, with phone number AND email address.

(5) Offerors are cautioned that “parroting” of the Performance Work Statement Performance Objectives with a statement of intent to perform does not reflect an understanding of the requirement or capability to perform.

BASIS FOR AWARD

1. The Government reserves the right to eliminate from consideration for award any or all offers at any time prior to award of the contract; to negotiate with offerors in the competitive range; and to award the contract to the offeror submitting the lowest priced, technically acceptable offer.

2. The Government intends to evaluate proposals and award a contract without discussions with offerors (except clarifications as described in FAR 15.306(a)).