Attachment K - Typical Work Requirements.docx

Typical Work Requirements

The Contractor shall provide expertise needed to accomplish the required work. Disciplines and related work requirements may include, but are not limited to:

1. Architectural

Enclosures, shelters, building systems, mobile buildings, chimneys, grout, mortar, concrete, brick, concrete masonry units (CMUs), waterproofing, insulation, caulking and sealants, roofing, gutters, drains, metal decking, joists, siding and exterior surfacing, levelers, docks, ramps, stairs, shelving, windows, doors, painting, finishes, louvers, awnings, shutters, panels, grills, ceilings, acoustical areas, walls, paneling, flooring (conductive and nonconductive), carpeting, tiles, builder’s hardware, signage, metals, woods and plastics, millwork, thermal and moisture protection, playground equipment, fireproofing, equipment systemization layouts, building fixtures and furnishings, and handicap systemization.

2. AE Design Services

Planning studies, surveying and mapping, soil borings, hydrology reports, geotechnical investigations, project programming documents, requirement development, preparing engineering evaluations, developing project scope, unit guidance or parametric cost estimating, cost evaluation, development of alternatives and economic analysis, analysis of proposed sites for foundations, utilities, access, constraints and identification of environmental issues, concept and site sketches, recommendations on potential utilities impacts, sustainable features, development of design-bid-build drawings and Unified Facilities Guide Specifications, development of design-build drawings and Unified Facilities Guide Specifications (UFGS), Bid Schedule, Submittal Register, quantity and cost estimates, proposed construction schedule, design analysis and calculations, design documentation report, engineering considerations and instructions report, commissioning, life cycle costing, benefit-cost analyses, economic analysis, and cost estimating services.

3.2.2.1. Drawings

3.2.2.2. Specifications

3.2.2.3. Construction Schedule

3.2.2.4. Design Analysis

3.2.2.5. Independent Technical Reviews

3.2.2.6. Design Documentation Report

3.2.2.7. Engineering Considerations and Instructions Report

3. Civil

Topographic surveying, grading and earthwork, surface and subsurface storm drainage and drainage control structures, storm water management, erosion and sediment control, clearing and grubbing, paving and surfacing for roads, parking areas and sidewalks, parking layout, pavement markings, traffic control and signage, gates and fencing, curbs and gutters, railroads, dewatering, landscaping, seeding and sodding, riprap, geotechnical investigations, slope stabilization, foundations, borings, trenching, piles and caissons, bridges, spill containment berms, demolition, wetlands delineation, and airfield runways and taxiways.

4. Electrical

Electrical distribution and network balancing (aerial and underground), transmission lines, poles (telephone and power), towers, ducts, raceways, conduits, tubing, connectors, wires, cable, cable trays, outlet boxes, cabinets and enclosures, supports, fiber optics cable and equipment, manholes, concrete pads, insulators, lightning arrestors, transformers, capacitors, switches, relays, fuses, grounding, lightning protection, cathodic protection, service entrances, panel boards, circuit breakers, motor control centers, special equipment/systems, targeting systems, resistance heating, starters, uninterrupted power supplies, beacons, batteries, generators, solar systems, receptacles, lighting fixtures, lamps, ballasts, equipment connections, special outlets, disconnect switches, splices, terminations, control systems, security systems, intrusion detection systems, utilities monitoring and control systems, and similar micro-processor environmental control systems, audio and visual communication systems, telephone systems, instrumentation systems, and fire detection and alarm systems.

5. Environmental

Industrial and sanitary sewers, waste treatment facilities, septic tanks with drains, portable toilets wells, water treatment facilities, water distribution systems, potable and fire water supplies, including wells, piping, pumps, valves, sprinklers, water use analyses, leakage analysis, hazardous waste analyses, and disposal of waste products.

6. Mechanical

Heating, ventilation and air-conditioning systems and components, chillers, refrigerants, cooling towers, air handling equipment, energy conservation, heat transfer surfaces, furnaces, air distribution, valves, pumps and associated piping and ducts; conveying systems, elevators, dumbwaiters, moving walks, box conveyors, hoists and cranes, lifts, escalators with associated electrical and hydraulic controls; incinerators, boilers, material handling systems, dryers, steam lines, transient tubes, shredders, plumbing fixtures, special equipment/systems, sterilization systems, fuel distribution (i.e. propane, natural gas, and slurries), petroleum oil lubricants, storage tanks for fuel, gas, water, and sewage, piping systems, fire suppression (water, chemical, and gas), fuel use and leak analyses, sterilizers, compressed air production and distribution systems, medical and industrial gas distribution systems, exhaust systems, steam systems, pipe insulation, and plumbing systems involving water, solids, and hazardous waste.

7. Safety

Life safety, fire protection systems, industrial hygiene, inflammatory gases, medical safety and hygiene, asbestos and/or lead based paint evaluation and removal/encapsulation, blast distances, failure mode and effective analyses, Occupational Safety and Hazards Act (OSHA) and American Disability Act evaluations.

8. Structural

Structural analysis of building systems and ancillary structures (concrete, masonry, steel, etc.), foundations, underwater structures, reinforced concrete, equipment mounting, shock isolation reinforced masonry, wood, steel joists, steel decks, structural steel frame systems, steel bracing, seismic evaluations, steel connections, non-building structures, welding procedures, detailing of structural components and hardened (protective) structures. Non-building structures such as elevated tanks, vertical tanks on ground, horizontal tanks, retaining walls and buried structures. Anchorage and support of mechanical and electrical equipment. Applications of industry building codes and standards.

9. Other Requirements

Asbestos and/or lead based paint abatement. Demolition and/or temporary removal and reinstallation of supporting elements. Surveys and assessments of systems/equipment.

All work shall be performed in accordance with Unified Facilities Guide Specifications (UFGS).