_J-1700000_Transportation.pdf

SECTION J

DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

TABLE OF CONTENTS

ATTACHMENT

NUMBER

ATTACHMENT TITLE

J-1700000-01 DEFINITIONS AND ACRONYMS

J-1700000-02 REFERENCES AND TECHNICAL DOCUMENTS

ATTACHMENT J-1700000-01

DEFINITIONS AND ACRONYMS

DEFINITION DESCRIPTION

Abnormal Wear and Tear The following list of discrepancies shall constitute abnormal wear and tear when identified during the inspection of buses by the Government.

Missing parts.

Missing tires (including spare tire).

Body Work: Scratches through the metal and scratches or dents over 5 inches in length or diameter.

Paint Work: Scratches or chips over 5 inches in length or diameter.

Glass:

- Windshield. Any crack. Pitted, chips, or scratches larger than one inch in length but which are in the critical area of the driver's vision or which will not pass safety inspection will also be deemed abnormal wear and tear;

- Other Glass. Cracked or broken. Also inoperative window mechanism.

Lights. Lenses or sealed beams broken.

Chrome and Other Bright Metal Exterior Trim:

- Bumpers. Dents over 15 inches in length or diameter. Scratches in the metal over 15-inch long.

- Grille. Broken grille. Dents larger than 5 inches in length or diameter.

Interior:

- Missing seats;

- Torn seat backs or panels;

- Damaged or burned seats or panels;

- Inoperable seats (unable to maintain a normal upright position);

- Inoperable arm rests (unable to maintain a normal horizontal position)

Authorized Passengers The designated person having proper identification.

Clean Free from dirt, graffiti, residue and litter.

Round Trip A trip starting at a specified location and ending at the starting location.

Pick up Point Shall be that point designated by the KO where authorized passengers are picked up or dropped off.

ATTACHMENT 1700000-02

REFERENCES AND TECHNICAL DOCUMENTS

The Contractor shall adhere to the applicable portions of the following publications and directives in performing the services required under this contract. This list shall not be considered all-inclusive and does not release the Contractor from all obligations that must be fulfilled in the observance and execution of this contract.

When U.S., European and/or Spanish directives, instructions and industry standards are applicable to the work to be performed under this contract, the most stringent directives, instructions and industry standards shall govern.

REFERENCE TITLE

DoD 4500.36-R Management, Acquisition, and Use of Motor Vehicles

NAVFAC P-300 Management of Civil Engineering Support Equipment

NAVFAC P-307

Ministerio del Trabajo Prevención de Riesgos Laborales.

NAVFAC P-307 Management of Weight Handling Equipment Maintenance and Certification

Real Decreto 1495 - Seguridad en Maquinas Elevadoras. Seguridad en Maquinas Elevadoras

Orden del Ministerio de Industria y Energía

UNE 58 105 76 - Aparatos Pesados de Elevación Normas de Seguridad.

Una Norma Española (UNE)

UNE 58 106 86 1R - Aparatos de Elevación Grúas Puente y Pórtico con Carro. Pruebas de Recepción.

Una Norma Española (UNE)

NAVSEA OP 5 (series) Ammunition and Explosives Safety Ashore All Applicable Spanish Road Code Norms All Applicable Spanish Motor Vehicle Department