L-4-Vol3-CE-Tables.xlsx
XLSX spreadsheet 25 KB Posted
- Attached to
- RFP Amendment - Undersea Warfare Training Range(USWTR) Increment II & III Federal contract opportunity
- Solicitation number
- N6134021R0006
About this file
This document contains instructions for a solicitation seeking proposals to redevelop and modernize four existing deep water undersea warfare training ranges and add two new shallow water ranges. The solicitation will be issued by the Naval Air Warfare Center Training Systems Division to support undersea training requirements. The deep water ranges include those located at Barking Sands Tactical Underwater Range at the Pacific Missile Range Facility in Hawaii, Atlantic Undersea Test and Evaluation Center in the Bahamas, and the Southern California Anti-Submarine Offshore Range located offshore of San Clemente Island, California. The two new shallow water ranges will be located near Tanner/Cortes Bank and west of San Clemente Island in California. The anticipated award date is June 1, 2021. The NAICS code is 334511 and the size standard is 1,250 employees. Small businesses acting as prime contractors should review the details of the Limitations on Subcontracting clause deviation. Questions should be directed only to the procuring contracting officer and contract specialist listed.
View the file
Other files for this federal contract opportunity
Show all 23
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Instructions **NOTE: This tab contains instructions for completing Table CE-1 Applicable Contracts For Each Corporate Experience Element
Note: Only contract references designated in Table CA-3 (Summary of Contract References) shall be used in completing this Volume and all contract references shall be numbered the same throughout all of the Offeror’s proposal volumes (i.e. the contracts identified as P1, S1, T1 etc. in Table CA-3 shall be the same P1, S1, T1, etc. contracts identified in Table CE-1). T.O.s and D.O.s should be treated as a contract and assigned a separate contract reference number.
Use a separate worksheet for each contract reference. Label each worksheet with the entity name and contract reference. For example, if the Prime is Example Corp and has submitted five contract references for evaluation, there should be five worksheets labeled as follows: Example - P1, Example - P2, Example - P3, Example - P4 and Example - P5.
Item 1 (Offeror Name) In Column C, fill in the Prime Offeror submitting a response to this solicitation.
Item 2 (Entity Name) In Column C, the Offeror shall enter the name of the principle entity for the contract reference.
Note: The term “entity” is defined in Part A General Instructions, Section 1.0 General.
Item 3 (Contract Reference) In Column C, enter the contract reference number.
Note: The contract reference should reference the same contract identified in Table CA-3.
Item 4 (Title of Contract) In Column C, fill in the contract title.
Item 5 (Contract / TO / DO / Subcontract Number) In Column C, identify any associated TO / DO / or subcontract number.
Item 6 (CAGE Code/DUNS No.) The Offeror shall provide the CAGE Code/DUNS No. If the number does not match the Offeror's, please provide an explaination.
Item 7 (Contract Dollar Amount) The Offeror shall provided the Contract Dollar Amount
Item 8 (Applicable CDS Section / Paragraph from Contract Reference Applicable to (Evaluation Element)) The Offeror shall identify the relevant portions (sections and paragraphs) of the Contractual Documentation Support (CDS) to clearly identify how corporate experience performing past tasks are similar to evaluation areas 3.1.1 through 3.1.4.
If the Offeror performed as a subcontractor for a contact reference, additionally include relevant portions (sections and paragraphs) of the work agreement with the Prime.
Note: A single contract reference may demonstrate experience in multiple elements.
CE-1
Table CE-1 Applicable Contracts for CE Elements
| 1 | Offeror Name | |
| 2 | Entity Name | |
| 3 | Contract Reference | |
| 4 | Title of Contract | |
| 5 | Contract/TO/DO/Subcontract Number | |
| 6 | CAGE Code/DUNS No. | |
| 7 | Contract Dollar Amount | |
| 8 | 3.1.1 Instrumentation Systems at Shallow Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.1 |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.2 Underwater Cables at Shallow Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.2 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.3 Instrumentation Systems at Deep Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.3 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.4 Underwater Cables at Deep Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.4 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation |
CE-2
Table CE-2 Evaluation Area Summary
| Contract Reference Number | Contract Number | 3.1.1 Instrumentation Systems at Shallow Water Depths | 3.1.2 Underwater Cables at Shallow Water Depths | 3.1.3 Instrumentation Systems at Deep Water Depths | 3.1.4 Underwater Cables at Deep Water Depths | ||||||||
| Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | ||
| P1 | |||||||||||||
| Pn | |||||||||||||
| T1 | |||||||||||||
| Tn |
File details come from the government source that posted it. Updated .