L-4-Vol3-CE-Tables.xlsx
XLSX spreadsheet 17 KB Posted
- Attached to
- RFP Amendment - Undersea Warfare Training Range(USWTR) Increment II & III Federal contract opportunity
- Solicitation number
- N6134021R0006
About this file
This document contains a solicitation for the redevelopment and modernization of four deep water undersea warfare training ranges and the addition of two shallow water ranges. The Navy seeks to upgrade the Barking Sands Tactical Underwater Range (BARSTUR) and Barking Sands Undersea Range Expansion (BSURE) in Hawaii, the Atlantic Undersea Test and Evaluation Center (AUTEC) in the Bahamas, and the Southern California Anti-Submarine Offshore Range off the coast of Southern California. Additionally, the solicitation aims to establish two new shallow water ranges, the West SWTR over Tanner/Cortes Bank in California and the East SWTR on the western side of San Clemente Island in California. The anticipated award date is June 1, 2021 under NAICS code 334511 with a size standard of 1,250 employees. Questions should be directed to the named contracting officer and contract specialist.
View the file
Other files for this federal contract opportunity
Show all 23
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Instructions **NOTE: This tab contains instructions for completing Table CE-1 Applicable Contracts For Each Corporate Experience Element
Note: Only contract references designated in Table ES-2 (Relevant Contract Summary) shall be used in completing this Volume and all contract references shall be numbered the same throughout all of the Offeror’s proposal volumes (i.e. the contracts identified as P1, S1, T1 etc. in Table ES-2 shall be the same P1, S1, T1, etc. contracts identified in Table CE-1). T.O.s and D.O.s should be treated as a contract and assigned a separate contract reference number.
Use a separate worksheet for each contract reference. Label each worksheet with the entity name and contract reference. For example, if the Prime is Example Corp and has submitted five contract references for evaluation, there should be five worksheets labeled as follows: Example - P1, Example - P2, Example - P3, Example - P4 and Example - P5.
Item 1 (Offeror Name) In Column C, fill in the Prime Offeror submitting a response to this solicitation.
Item 2 (Entity Name) In Column C, the Offeror shall enter the name of the principle entity for the contract reference.
Note: The term “entity” is defined in Part A General Instructions, Section 1.0 General.
Item 3 (Contract Reference) In Column C, enter the contract reference number.
Note: The contract reference should reference the same contract identified in Table ES-2 and PP-1.
Item 4 (Title of Contract) In Column C, fill in the contract title.
Item 5 (Contract / TO / DO / Subcontract Number) In Column C, identify any associated TO / DO / or subcontract number.
Item 6 (CAGE Code/DUNS No.) The Offeror shall provide the CAGE Code/DUNS No. If the number does not match the Offeror's, please provide an explaination.
Item 7 (Contract Dollar Amount) The Offeror shall provided the Contract Dollar Amount
Item 8 (Applicable CDS Section / Paragraph from Contract Reference Applicable to (Evaluation Element)) The Offeror shall identify the relevant portions (sections and paragraphs) of the Contractual Documentation Support (CDS) to clearly identify how corporate experience performing past tasks are similar to evaluation areas 3.1.1 through 3.1.4.
If the Offeror performed as a subcontractor for a contact reference, additionally include relevant portions (sections and paragraphs) of the work agreement with the Prime.
Note: A single contract reference may demonstrate experience in multiple elements.
CE-1
Table CE-1 Applicable Contracts for CE Elements
| 1 | Offeror Name | |
| 2 | Entity Name | |
| 3 | Contract Reference | |
| 4 | Title of Contract | |
| 5 | Contract/TO/DO/Subcontract Number | |
| 6 | CAGE Code/DUNS No. | |
| 7 | Contract Dollar Amount | |
| 8 | 3.1.1 Instrumentation Systems at Shallow Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.1 |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.2 Underwater Cables at Shallow Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.2 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.3 Instrumentation Systems at Deep Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.3 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation | ||
| 3.1.4 Underwater Cables at Deep Water Depths | Applicable CDS Section/Paragraph from Contract Reference Applicable to 3.1.4 | |
| (1) Manufacture | ||
| (2) Installation | ||
| (3) Test and Evaluation |
CE-2
Table CE-2 Evaluation Area Summary
| Contract Reference Number | Contract Number | 3.1.1 Instrumentation Systems at Shallow Water Depths | 3.1.2 Underwater Cables at Shallow Water Depths | 3.1.3 Instrumentation Systems at Deep Water Depths | 3.1.4 Underwater Cables at Deep Water Depths | ||||||||
| Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | Manufacture | Installation | Test and Evaluation | ||
| P1 | |||||||||||||
| Pn | |||||||||||||
| T1 | |||||||||||||
| Tn |
File details come from the government source that posted it. Updated .