EMAIL FOR J15-REQUEST FOR SPECIFICATION CLARIFICATION.pdf
PDF 433 KB Posted
- Attached to
- NON-SKID ALTERATIONS FFP MAC-IDIQ Federal contract opportunity
- Solicitation number
- N5005420R0005
About this file
This email from a contracting officer provides clarification questions and answers regarding a solicitation for non-skid alterations on naval vessels. The solicitation seeks fixed-price MAC-IDIQ contracts from total small businesses for non-skid removal and replacement. Clarification is requested on liquidated damages amounts, undisclosed work pricing including labor rates and material costs, and exhibits with updated line item estimates. The contracting officer's email includes attachments of the request for clarification, revised cost exhibits with changes to estimated quantities and unit pricing, and notifies offerors to use the revised exhibits in their proposals. The naval activities involved are the Mid-Atlantic Regional Maintenance Center and Naval Sea Systems Command. Proposals are due for the non-skid alterations requirement on naval vessels.
View the file
Other files for this federal contract opportunity
Show all 21
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
From: Hill-Turner, Monica E CIV USN MIDLANT RMC NOR VA (USA) To: Hill-Turner, Monica E CIV MARMC, C412 Cc: Rosquist, Susan R CIV USN MIDLANT RMC NOR VA (USA); Brasher, Chase W CIV USN MIDLANT RMC NOR VA
(USA); Hodges, GregorY D CIV USN MIDLANT RMC NOR VA (USA); "Clark, Floyd D CIV USN (USA)"; Randall Lynch
Bcc: "llafreniere@tidalcorrosion.com"; "dmaxwell@networkindustries.org"; "rfq@mspva.com"; "Peter Lignos";
"stumpvastc@aol.com"; "IHoward@surfacetechnologiescorp.com"; "STCHeadquarters@aol.com";
"chrischalloner@mainindustries.com"; "Frank Dean"; "Bill Hirsch"; "MHINTON@MAININDUSTRIES.COM";
"r.dupuy@uhpprojects.com"; "UHP Brian Mullett"; "m.wilde@uhpprojects.com"; "a.mullett@uhpprojects.com";
"KAWILSON@ECRFAB.COM"; "Patrick Hill"; "Richard Faulkenberry"; "Jorge Rivera";
"jsolomon@internationalflooring.com"; "tgentry@internationalflooring.com"
Subject: J15-REQUEST FOR SPECIFICATION CLARIFICATION; 001-002 ANSWERED; N5005420R0005; NON-SKID
ALTERATIONS
Date: Wednesday, August 26, 2020 15:59:00 Attachments: J15_-_Request_for_Specification_Clarification.xlsx
EXHIBITS A-E REV.xlsx
All, The attached J15-REQUEST FOR SPECIFICATION CLARIFICATION shall be considered when submitting your proposal for Solicitation N5005420R0005, NON-SKID ALTERATIONS.
Contractor’s shall use attached “EXHIBITS A-E REV.xlsx” for their proposal. Previous versions will not be accepted. These forms will also be available on Beta.Sam.
Attached “EXHIBITS A-E REV.xlsx” has been revised as follows:
A149 EST QTY = 5
A150 EST QTY = 2,000
A151 EST QTY = 700
A152 EST QTY = $1.00 UNIT PRICE = $40,000.00
A153 EST QTY = 40,000
A154 EST QTY = $1.00 UNIT PRICE = $36,900.00
A155 EST QTY = 36,900
B149 EST QTY = 5
B150 EST QTY = 2,000
B151 EST QTY = 700
B152 EST QTY = $1.00 UNIT PRICE = $44,000.00
B153 EST QTY = 44,000
B154 EST QTY = $1.00 UNIT PRICE = $36,900.00
B155 EST QTY = 36,900
C149 EST QTY = 5
C150 EST QTY = 2,000
C151 EST QTY = 700
C152 EST QTY = $1.00 UNIT PRICE = $44,000.00
C153 EST QTY = 44,000
C154 EST QTY = $1.00 UNIT PRICE = $36,900.00
C155 EST QTY = 36,900
D132 EST QTY = 28,000
D149 EST QTY = 5
D150 EST QTY = 2,000
mailto:monica.hill-turner@navy.mil mailto:monica.hill-turner@navy.mil mailto:susan.rosquist@navy.mil mailto:chase.w.brasher@navy.mil mailto:chase.w.brasher@navy.mil mailto:gregory.d.hodges@navy.mil mailto:floyd.d.clark@navy.mil mailto:randall.s.lynch@navy.mil mailto:randall.s.lynch@navy.mil mailto:"llafreniere@tidalcorrosion.com" mailto:"dmaxwell@networkindustries.org" mailto:"rfq@mspva.com" mailto:plignos@ampunited.com mailto:"stumpvastc@aol.com" mailto:"IHoward@surfacetechnologiescorp.com" mailto:"STCHeadquarters@aol.com" mailto:"chrischalloner@mainindustries.com" mailto:fdean@mainindustries.com mailto:bhirsch@mainindustries.com mailto:"MHINTON@MAININDUSTRIES.COM" mailto:"r.dupuy@uhpprojects.com" mailto:b.mullett@uhpprojects.com mailto:"m.wilde@uhpprojects.com" mailto:"a.mullett@uhpprojects.com" mailto:"KAWILSON@ECRFAB.COM" mailto:phill@ecrfab.com mailto:rfaulkenberry@ecrfab.com mailto:jlrivera@ecrfab.com mailto:"jsolomon@internationalflooring.com" mailto:"tgentry@internationalflooring.com"
Sheet1
REQUEST FOR SPECIFICATION CLARIFICATION
DATE OF REQUEST: 08-21-2020 SOLICITATION NO: N5005420R0005
TITLE: NON-SKID-ALTERATIONS MARMC POC: Susan Rosquist, susan.rosquist@navy.mil, (757) 400-2789 and Chase Brasher, chase.w.brasher@navy.mil, (757) 837-8585
ITEM NO: Section 52.211-11 CONTRACTOR QUESTION 1: Are there going to be liquidated damage? If so how much? This section is currently left blank. GOVERNMENT RESPONSE: This section is left blank because the amount will be determined at the delivery order level.
TITLE: Liquidated damages
PARA. NO:
PAGE NO:
ITEM NO: CLINS CONTRACTOR QUESTION 2: What amount is to be used for ClINS A152, B152, C152, D152 & E152 GOVERNMENT RESPONSE: See the EXHIBITS A-E REV and the additional correction listed on the email.
TITLE:
PARA. NO:
PAGE NO:
ITEM NO: CONTRACTOR QUESTION 3: GOVERNMENT RESPONSE:
TITLE:
PARA. NO:
PAGE NO:
ITEM NO: CONTRACTOR QUESTION 4: GOVERNMENT RESPONSE:
TITLE:
PARA. NO:
PAGE NO:
ITEM NO: CONTRACTOR QUESTION 5: GOVERNMENT RESPONSE:
TITLE:
PARA. NO:
PAGE NO:
ITEM NO: CONTRACTOR QUESTION 6: GOVERNMENT RESPONSE:
TITLE:
PARA. NO:
PAGE NO:
ITEM NO: CONTRACTOR QUESTION 7: GOVERNMENT RESPONSE:
TITLE:
PARA. NO:
PAGE NO:
image1.png
EXHIBIT A - BASE YEAR
EXHIBIT A - ELINS
CONTRACTOR'S NAME
| Supplies/Services | Est Qty | Unit | Unit | ||
| Price | Amount |
A 101 Labor and Material to Abrasive Blast - Remove up to 25,000 SF of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 25,000 SF $0.00 $ - 0
A 102 Labor and Material to Abrasive Blast –(Open Nozzle Blast: With SSPC-AB 4 media that does not contain steel abrasive or MIL-A-22262 abrasive) Removal of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat 25,000 SF $0.00 $ - 0
A 103 Labor and Material to Abrasive Blast - Remove existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 26,000 SF $0.00 $ - 0
A 104 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas up to 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 75,000 SF $0.00 $ - 0
A 105 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 38,000 SF $0.00 $ - 0
A 106 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing abrasive blast method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
A 107 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing ultra high pressure water jetting method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
A 108 Labor and material to remove any high solid non-skid system utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 15,000 SF $0.00 $ - 0
A 109 Labor and material to remove any high solid non-skid system utilizing ultra high pressure water jetting method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
A 110 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 70,000 SF $0.00 $ - 0
A 111 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 112 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
A 113 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 114 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 23,000 SF $0.00 $ - 0
A 115 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 116 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
A 117 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 118 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 15,000 SF $0.00 $ - 0
A 119 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 120 Labor and material to apply epoxy non-skid with rubber membrane conforming to QPL as listed Type III (Flex). Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 121 Labor and material to remove Type III non-skid, resurface membrane, patch a total of 15% of surface area, apply new MIL-PRF-24667 Type III non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 122 Labor and material to patch Type III membrane greater than 15% 1,000 SF $0.00 $ - 0
A 123 Labor and material to Skim Coat Type III membrane 500 SF $0.00 $ - 0
A 124 Labor and material to apply epoxy non-skid conforming to QPL as listed Type IV (Spray). Apply new danger, warning, and VLA markings. 500 SF $0.00 $ - 0
A 125 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
A 126 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 127 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 128 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 129 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
A 130 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 131 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
A 132 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
A 133 Labor and material to apply Type I MIL-PRF-24667, Composition L, MS-400L, High Solid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 134 Labor and material to apply Type I MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 135 Labor and material to apply Type II MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
A 136 Labor and material to accomplish Stripe Coating on Edging and Weld Seams in accordance with NSTM 634. 1,000 LF $0.00 $ - 0
A 137 Labor and material to accomplish Barrier Coat on Previously Primed Decking. 25,000 SF $0.00 $ - 0
A 138 Labor and material for Surface Protection for Areas Without Non-Skid. Provide deck gray (top coat) in areas without non-skid. Apply new danger, warning, and VLA markings. 10,000 SF $0.00 $ - 0
A 139 Labor and Material for Abrasive Blast - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-23236 Type VII, Class 17 applied at 6-8 mils followed by a coat of MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
A 140 Labor and Material for Ultra High Pressure Water Jetting - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-24667 Type I, V, and VI COMP G applied at 4-6 mils followed by ONE coat of DECK GRAY NO. 26008 (FED STD 595) MIL-PREF-24635 TYPE III, 2-3 mils or TYPE V 5-8 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
A 141 Labor and Material for Removal of Worn/Torn Product (Peel and Stick) - Product removal shall be accomplished in accordance with the manufacturer's instructions. 1,000 SF $0.00 $ - 0
A 142 Labor and Material for Topcoat - MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils. 1,000 SF $0.00 $ - 0
A 143 Labor and material for self-adhesive installation of Peel and Stick non-skid sections - Installation of Peel and Stick non-skid shall conform to MIL-PRF-24667 Type XI or other material as approved by NAVSEA. Spaces between adjacent pieces may be up to 1-1/2 inches. This spacing should align with weld seams to the maximum extent practicable to avoid the material from bridging these seams. Seal all free edges of Peel and Stick non-skid with the manufacturer's approved sealer. 1,000 SF $0.00 $ - 0
A 144 Labor and material to accomplish one additional cleaning and surface prep to achieve in-tolerance conductivity readings in accordance with NSI 009-32. 25,000 SF $0.00 $ - 0
A 145 (Green Sweep) Labor and material to accomplish one additional cleaning (NACE/SSPC-SP WJ-4). Exterior MIL-PRF-24667 (Types I – VIII) surfaces. Maximum water pressure must be such that 30 seconds of stationary operation of the vacuum 1,000 SF $0.00 $ - 0
A 146 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
A 147 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
A 148 Labor and material for surface preparation of wheel stops/gutters 1,000 LF $0.00 $ - 0
A 149 Labor and Material for Gas Free Certification 5 EA $0.00 $ - 0
A 150 Undisclosed Work - Straight Time 2,000 HR $0.00 $ - 0
The Undisclosed Work ELINS are intended to be used to accomplish tasks that are required, but which are not covered by ELINS A101 through A149. Undisclosed Work will not be used to reimburse overtime used in accomplishing tasks under ELINS A101 through A149. Undisclosed work tasks will be reimbursed based on the hourly rate bid, times the actual number of hours agreed to and fixed, plus the actual costs of material, both as defined in FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Ordering Work."
A 151 Undisclosed Work - Overtime 700 HR $0.00 $ - 0
A 152 Undisclosed Work - Material (Covers only material required for Undisclosed Work) 1 U.S. DOLLARS $40,000.00 $ 40,000.00
A 153 Undisclosed Work - Material G&A/Handling (Contractor to submit a percentage.) 40,000 X 0% $ - 0
In negotiating the fixed price for materials, the contractor shall submit quotes or invoices for the materials required. The negotiated price for materials shall be the quote or invoice price submitted by the contractor for actual materials plus transportation charges, both subject to verification by the Government as to reasonableness. The Government will not pay any material handling charges under the material ELIN. All material handling charges are included in the Material G&A/Handling ELIN.
A 154 Travel/Per Diem (for bidding purposes only) 1 U.S. DOLLARS $36,900.00 $ 36,900.00
Actual travel will be reimbursed in accordance with FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Reimbursement of Travel Costs."
A 155 Travel/Per Diem G&A (Contractor to submit a percentage.) 36,900 X 0% $ - 0
Total Estimate for Base Year $ 76,900.00
NOTE 1: Proposed prices for each line item are to be fully burdened to include the potential of escalating fuel costs, all direct and indirect costs, LABOR, material (with the exception of the provision for material in Undisclosed Work), equipment rental, services, overhead, profit and to include work and costs to implement Cat I and II NAVSEA Standard Items (NSIs), Local Work Templates (LWTs), and Standard Work Templates (SWTs). Additionally, any overtime cost required to complete these tasks must be included in the ELIN prices.
NOTE 2: ELINS are to be fully burdened to include any required subcontractors. Subcontract effort shall not be priced as material or considered as part of the material pools.
NOTE 3: Overtime is not authorized under the terms and conditions of this contract (with the exception of Undisclosed Work - Overtime) and thus will not be paid as a reimbursable expense or cost related to travel or any other category of incurred cost or expense.
NOTE 4: ELINS are to be fully burdened to include any required rental equipment.
EXHIBIT B OPTION I - 2ND YR
EXHIBIT B - ELINS
CONTRACTOR'S NAME
| Supplies/Services | Est Qty | Unit | Unit | ||
| Price | Amount |
B 101 Labor and Material to Abrasive Blast - Remove up to 25,000 SF of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 25,000 SF $0.00 $ - 0
B 102 Labor and Material to Abrasive Blast –(Open Nozzle Blast: With SSPC-AB 4 media that does not contain steel abrasive or MIL-A-22262 abrasive) Removal of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat 25,000 SF $0.00 $ - 0
B 103 Labor and Material to Abrasive Blast - Remove existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 26,000 SF $0.00 $ - 0
B 104 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas up to 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 75,000 SF $0.00 $ - 0
B 105 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 38,000 SF $0.00 $ - 0
B 106 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing abrasive blast method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
B 107 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing ultra high pressure water jetting method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
B 108 Labor and material to remove any high solid non-skid system utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 15,000 SF $0.00 $ - 0
B 109 Labor and material to remove any high solid non-skid system utilizing ultra high pressure water jetting method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
B 110 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 70,000 SF $0.00 $ - 0
B 111 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 112 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
B 113 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 114 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 23,000 SF $0.00 $ - 0
B 115 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 116 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
B 117 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 118 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 15,000 SF $0.00 $ - 0
B 119 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 120 Labor and material to apply epoxy non-skid with rubber membrane conforming to QPL as listed Type III (Flex). Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 121 Labor and material to remove Type III non-skid, resurface membrane, patch a total of 15% of surface area, apply new MIL-PRF-24667 Type III non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 122 Labor and material to patch Type III membrane greater than 15% 1,000 SF $0.00 $ - 0
B 123 Labor and material to Skim Coat Type III membrane 500 SF $0.00 $ - 0
B 124 Labor and material to apply epoxy non-skid conforming to QPL as listed Type IV (Spray). Apply new danger, warning, and VLA markings. 500 SF $0.00 $ - 0
B 125 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
B 126 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 127 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 128 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 129 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
B 130 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 131 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
B 132 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
B 133 Labor and material to apply Type I MIL-PRF-24667, Composition L, MS-400L, High Solid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 134 Labor and material to apply Type I MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 135 Labor and material to apply Type II MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
B 136 Labor and material to accomplish Stripe Coating on Edging and Weld Seams in accordance with NSTM 634. 1,000 LF $0.00 $ - 0
B 137 Labor and material to accomplish Barrier Coat on Previously Primed Decking. 25,000 SF $0.00 $ - 0
B 138 Labor and material for Surface Protection for Areas Without Non-Skid. Provide deck gray (top coat) in areas without non-skid. Apply new danger, warning, and VLA markings. 10,000 SF $0.00 $ - 0
B 139 Labor and Material for Abrasive Blast - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-23236 Type VII, Class 17 applied at 6-8 mils followed by a coat of MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
B 140 Labor and Material for Ultra High Pressure Water Jetting - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-24667 Type I, V, and VI COMP G applied at 4-6 mils followed by ONE coat of DECK GRAY NO. 26008 (FED STD 595) MIL-PREF-24635 TYPE III, 2-3 mils or TYPE V 5-8 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
B 141 Labor and Material for Removal of Worn/Torn Product (Peel and Stick) - Product removal shall be accomplished in accordance with the manufacturer's instructions. 1,000 SF $0.00 $ - 0
B 142 Labor and Material for Topcoat - MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils. 1,000 SF $0.00 $ - 0
B 143 Labor and material for self-adhesive installation of Peel and Stick non-skid sections - Installation of Peel and Stick non-skid shall conform to MIL-PRF-24667 Type XI or other material as approved by NAVSEA. Spaces between adjacent pieces may be up to 1-1/2 inches. This spacing should align with weld seams to the maximum extent practicable to avoid the material from bridging these seams. Seal all free edges of Peel and Stick non-skid with the manufacturer's approved sealer. 1,000 SF $0.00 $ - 0
B 144 Labor and material to accomplish one additional cleaning and surface prep to achieve in-tolerance conductivity readings in accordance with NSI 009-32. 25,000 SF $0.00 $ - 0
B 145 (Green Sweep) Labor and material to accomplish one additional cleaning (NACE/SSPC-SP WJ-4). Exterior MIL-PRF-24667 (Types I – VIII) surfaces. Maximum water pressure must be such that 30 seconds of stationary operation of the vacuum 1,000 SF $0.00 $ - 0
B 146 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
B 147 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
B 148 Labor and material for surface preparation of wheel stops/gutters 1,000 LF $0.00 $ - 0
B 149 Labor and Material for Gas Free Certification 5 EA $0.00 $ - 0
B 150 Undisclosed Work - Straight Time 2,000 HR $0.00 $ - 0
The Undisclosed Work ELINS are intended to be used to accomplish tasks that are required, but which are not covered by ELINS B101 through B149. Undisclosed Work will not be used to reimburse overtime used in accomplishing tasks under ELINS B101 through B149. Undisclosed work tasks will be reimbursed based on the hourly rate bid, times the actual number of hours agreed to and fixed, plus the actual costs of material, both as defined in FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Ordering Work."
B 151 Undisclosed Work - Overtime 700 HR $0.00 $ - 0
B 152 Undisclosed Work - Material (Covers only material required for Undisclosed Work) 1 U.S. DOLLARS $44,000.00 $ 44,000.00
B 153 Undisclosed Work - Material G&A/Handling (Contractor to submit a percentage.) 44,000 X 0% $ - 0
In negotiating the fixed price for materials, the contractor shall submit quotes or invoices for the materials required. The negotiated price for materials shall be the quote or invoice price submitted by the contractor for actual materials plus transportation charges, both subject to verification by the Government as to reasonableness. The Government will not pay any material handling charges under the material ELIN. All material handling charges are included in the Material G&A/Handling ELIN.
B 154 Travel/Per Diem (for bidding purposes only) 1 U.S. DOLLARS $36,900.00 $ 36,900.00
Actual travel will be reimbursed in accordance with FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Reimbursement of Travel Costs."
B 155 Travel/Per Diem G&A (Contractor to submit a percentage.) 36,900 X 0% $ - 0
Total Estimate for Base Year $ 80,900.00
NOTE 1: Proposed prices for each line item are to be fully burdened to include the potential of escalating fuel costs, all direct and indirect costs, LABOR, material (with the exception of the provision for material in Undisclosed Work), equipment rental, services, overhead, profit and to include work and costs to implement Cat I and II NAVSEA Standard Items (NSIs), Local Work Templates (LWTs), and Standard Work Templates (SWTs). Additionally, any overtime cost required to complete these tasks must be included in the ELIN prices.
NOTE 2: ELINS are to be fully burdened to include any required subcontractors. Subcontract effort shall not be priced as material or considered as part of the material pools.
NOTE 3: Overtime is not authorized under the terms and conditions of this contract (with the exception of Undisclosed Work - Overtime) and thus will not be paid as a reimbursable expense or cost related to travel or any other category of incurred cost or expense.
NOTE 4: ELINS are to be fully burdened to include any required rental equipment.
EXHIBIT C - OPTION II - 3RD YR
EXHIBIT C - ELINS
CONTRACTOR'S NAME
| Supplies/Services | Est Qty | Unit | Unit | ||
| Price | Amount |
C 101 Labor and Material to Abrasive Blast - Remove up to 25,000 SF of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 25,000 SF $0.00 $ - 0
C 102 Labor and Material to Abrasive Blast –(Open Nozzle Blast: With SSPC-AB 4 media that does not contain steel abrasive or MIL-A-22262 abrasive) Removal of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat 25,000 SF $0.00 $ - 0
C 103 Labor and Material to Abrasive Blast - Remove existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 26,000 SF $0.00 $ - 0
C 104 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas up to 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 75,000 SF $0.00 $ - 0
C 105 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 38,000 SF $0.00 $ - 0
C 106 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing abrasive blast method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
C 107 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing ultra high pressure water jetting method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
C 108 Labor and material to remove any high solid non-skid system utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 15,000 SF $0.00 $ - 0
C 109 Labor and material to remove any high solid non-skid system utilizing ultra high pressure water jetting method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
C 110 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 70,000 SF $0.00 $ - 0
C 111 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 112 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
C 113 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 114 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 23,000 SF $0.00 $ - 0
C 115 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 116 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
C 117 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 118 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 15,000 SF $0.00 $ - 0
C 119 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 120 Labor and material to apply epoxy non-skid with rubber membrane conforming to QPL as listed Type III (Flex). Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 121 Labor and material to remove Type III non-skid, resurface membrane, patch a total of 15% of surface area, apply new MIL-PRF-24667 Type III non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 122 Labor and material to patch Type III membrane greater than 15% 1,000 SF $0.00 $ - 0
C 123 Labor and material to Skim Coat Type III membrane 500 SF $0.00 $ - 0
C 124 Labor and material to apply epoxy non-skid conforming to QPL as listed Type IV (Spray). Apply new danger, warning, and VLA markings. 500 SF $0.00 $ - 0
C 125 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
C 126 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 127 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 128 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 129 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
C 130 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition G non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 131 Labor and material to apply up to 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
C 132 Labor and material to apply above 25,000 SF with Type VIII (Low Temperature Cure) MIL-PRF-24667 Composition L non-skid. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
C 133 Labor and material to apply Type I MIL-PRF-24667, Composition L, MS-400L, High Solid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 134 Labor and material to apply Type I MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 135 Labor and material to apply Type II MIL-PRF-24667, Composition G, UV/LSA non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
C 136 Labor and material to accomplish Stripe Coating on Edging and Weld Seams in accordance with NSTM 634. 1,000 LF $0.00 $ - 0
C 137 Labor and material to accomplish Barrier Coat on Previously Primed Decking. 25,000 SF $0.00 $ - 0
C 138 Labor and material for Surface Protection for Areas Without Non-Skid. Provide deck gray (top coat) in areas without non-skid. Apply new danger, warning, and VLA markings. 10,000 SF $0.00 $ - 0
C 139 Labor and Material for Abrasive Blast - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-23236 Type VII, Class 17 applied at 6-8 mils followed by a coat of MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
C 140 Labor and Material for Ultra High Pressure Water Jetting - Remove existing deck covering (non-high non-skid or paint). Prime to cleaned deck with a proprietary paint system. Primer shall be MIL-PRF-24667 Type I, V, and VI COMP G applied at 4-6 mils followed by ONE coat of DECK GRAY NO. 26008 (FED STD 595) MIL-PREF-24635 TYPE III, 2-3 mils or TYPE V 5-8 mils in preparation for installation of Peel and Stick. 1,000 SF $0.00 $ - 0
C 141 Labor and Material for Removal of Worn/Torn Product (Peel and Stick) - Product removal shall be accomplished in accordance with the manufacturer's instructions. 1,000 SF $0.00 $ - 0
C 142 Labor and Material for Topcoat - MIL-PRF-32171 Type I Class 1 or 2 applied at 10-12 mils. 1,000 SF $0.00 $ - 0
C 143 Labor and material for self-adhesive installation of Peel and Stick non-skid sections - Installation of Peel and Stick non-skid shall conform to MIL-PRF-24667 Type XI or other material as approved by NAVSEA. Spaces between adjacent pieces may be up to 1-1/2 inches. This spacing should align with weld seams to the maximum extent practicable to avoid the material from bridging these seams. Seal all free edges of Peel and Stick non-skid with the manufacturer's approved sealer. 1,000 SF $0.00 $ - 0
C 144 Labor and material to accomplish one additional cleaning and surface prep to achieve in-tolerance conductivity readings in accordance with NSI 009-32. 25,000 SF $0.00 $ - 0
C 145 (Green Sweep) Labor and material to accomplish one additional cleaning (NACE/SSPC-SP WJ-4). Exterior MIL-PRF-24667 (Types I – VIII) surfaces. Maximum water pressure must be such that 30 seconds of stationary operation of the vacuum 1,000 SF $0.00 $ - 0
C 146 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
C 147 Labor and Material for Containment Enclosure - Enclosure setup/removal, transportation and maintained operating with electrical lights and climate control equipment to support flight deck non-skid replacement. 30 DAY $0.00 $ - 0
C 148 Labor and material for surface preparation of wheel stops/gutters 1,000 LF $0.00 $ - 0
C 149 Labor and Material for Gas Free Certification 5 EA $0.00 $ - 0
C 150 Undisclosed Work - Straight Time 2,000 HR $0.00 $ - 0
The Undisclosed Work ELINS are intended to be used to accomplish tasks that are required, but which are not covered by ELINS C101 through C149. Undisclosed Work will not be used to reimburse overtime used in accomplishing tasks under ELINS C101 through C149. Undisclosed work tasks will be reimbursed based on the hourly rate bid, times the actual number of hours agreed to and fixed, plus the actual costs of material, both as defined in FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Ordering Work."
C 151 Undisclosed Work - Overtime 700 HR $0.00 $ - 0
C 152 Undisclosed Work - Material (Covers only material required for Undisclosed Work) 1 U.S. DOLLARS $44,000.00 $ 44,000.00
C 153 Undisclosed Work - Material G&A/Handling (Contractor to submit a percentage.) 44,000 X 0% $ - 0
In negotiating the fixed price for materials, the contractor shall submit quotes or invoices for the materials required. The negotiated price for materials shall be the quote or invoice price submitted by the contractor for actual materials plus transportation charges, both subject to verification by the Government as to reasonableness. The Government will not pay any material handling charges under the material ELIN. All material handling charges are included in the Material G&A/Handling ELIN.
C 154 Travel/Per Diem (for bidding purposes only) 1 U.S. DOLLARS $36,900.00 $ 36,900.00
Actual travel will be reimbursed in accordance with FAR 52.252-4 ALTERATIONS IN CONTRACT, entitled "Reimbursement of Travel Costs."
C 155 Travel/Per Diem G&A (Contractor to submit a percentage.) 36,900 X 0% $ - 0
Total Estimate for Base Year $ 80,900.00
NOTE 1: Proposed prices for each line item are to be fully burdened to include the potential of escalating fuel costs, all direct and indirect costs, LABOR, material (with the exception of the provision for material in Undisclosed Work), equipment rental, services, overhead, profit and to include work and costs to implement Cat I and II NAVSEA Standard Items (NSIs), Local Work Templates (LWTs), and Standard Work Templates (SWTs). Additionally, any overtime cost required to complete these tasks must be included in the ELIN prices.
NOTE 2: ELINS are to be fully burdened to include any required subcontractors. Subcontract effort shall not be priced as material or considered as part of the material pools.
NOTE 3: Overtime is not authorized under the terms and conditions of this contract (with the exception of Undisclosed Work - Overtime) and thus will not be paid as a reimbursable expense or cost related to travel or any other category of incurred cost or expense.
NOTE 4: ELINS are to be fully burdened to include any required rental equipment.
EXHIBIT D - OPTION III - 4TH YR
EXHIBIT D - ELINS
CONTRACTOR'S NAME
| Supplies/Services | Est Qty | Unit | Unit | ||
| Price | Amount |
D 101 Labor and Material to Abrasive Blast - Remove up to 25,000 SF of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 25,000 SF $0.00 $ - 0
D 102 Labor and Material to Abrasive Blast –(Open Nozzle Blast: With SSPC-AB 4 media that does not contain steel abrasive or MIL-A-22262 abrasive) Removal of existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat 25,000 SF $0.00 $ - 0
D 103 Labor and Material to Abrasive Blast - Remove existing deck covering (non-high solid non-skid or paint) utilizing abrasive blast method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 26,000 SF $0.00 $ - 0
D 104 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas up to 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 75,000 SF $0.00 $ - 0
D 105 Labor and Material to accomplish Ultra High Pressure Water Jetting - Remove existing deck covering (non-high solid non-skid or paint) utilizing ultra high pressure water jetting method for areas greater than 25,000 SF from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 38,000 SF $0.00 $ - 0
D 106 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing abrasive blast method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
D 107 Labor and material to remove 100% of Type III non-skid and rubber membrane up to 2-1/2 inches thick utilizing ultra high pressure water jetting method. Prime the prepared deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
D 108 Labor and material to remove any high solid non-skid system utilizing abrasive blast method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 15,000 SF $0.00 $ - 0
D 109 Labor and material to remove any high solid non-skid system utilizing ultra high pressure water jetting method from aircraft elevators, flight, hangar, and other decks. Prime the cleaned deck with a proprietary paint system and stripe coat. 1,000 SF $0.00 $ - 0
D 110 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 70,000 SF $0.00 $ - 0
D 111 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 112 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
D 113 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition D. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 114 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 23,000 SF $0.00 $ - 0
D 115 Labor and material to apply non-high solid non-skid above 25,000 SF with Type I MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 116 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
D 117 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 118 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 15,000 SF $0.00 $ - 0
D 119 Labor and material to apply non-high solid non-skid above 25,000 SF with Type II MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 120 Labor and material to apply epoxy non-skid with rubber membrane conforming to QPL as listed Type III (Flex). Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
D 121 Labor and material to remove Type III non-skid, resurface membrane, patch a total of 15% of surface area, apply new MIL-PRF-24667 Type III non-skid. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
D 122 Labor and material to patch Type III membrane greater than 15% 1,000 SF $0.00 $ - 0
D 123 Labor and material to Skim Coat Type III membrane 500 SF $0.00 $ - 0
D 124 Labor and material to apply epoxy non-skid conforming to QPL as listed Type IV (Spray). Apply new danger, warning, and VLA markings. 500 SF $0.00 $ - 0
D 125 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 25,000 SF $0.00 $ - 0
D 126 Labor and material to apply non-high solid non-skid above 25,000 SF with Type V MIL-PRF-24667, Composition G. Apply new danger, warning, and VLA markings. 26,000 SF $0.00 $ - 0
D 127 Labor and material to apply non-high solid non-skid up to 25,000 SF with Type V MIL-PRF-24667, Composition L. Apply new danger, warning, and VLA markings. 1,000 SF $0.00 $ - 0
D 128 Labor and material to apply non-high solid…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .