J9_SWT_992-031.pdf
PDF 68 KB Posted
- Solicitation number
- N50054-19-R-0001
About this file
This standard work template outlines requirements for cleaning and pumping services aboard naval vessels. The contractor must clean, empty, ventilate, and maintain tanks and spaces, including removing liquids and debris. Requirements include certifying tank spaces, pumping petroleum products, cleaning bilges and chain lockers, inspecting for completion of repairs, installing manhole covers and tanks closures, and coordinating filling of compensating fuel tanks. The contractor must follow all applicable safety and environmental regulations when handling and disposing of wastes. Reference documents include standard items, technical manuals, unified facilities guide specifications, and military standards. Inspection and coordination of work will be performed by the SUPERVISOR and Damage Control Assistant.
J9 - Cleaning and Pumping
View the file
Other files
Show all 39
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STANDARD WORK TEMPLATE
SHIP: N/A ITEM NO: 992-31
COAR: N/A PCN: N/A
SWT FILE NO: 992-031 CMP: N/A
REVISED: 07 Nov 2017 PLANNER: N/A
1 of 5 ITEM NO: 992-031
EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.
International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.
1. SCOPE:
1.1 Title: Cleaning and Pumping; accomplish
1.2 Location of Work:
1.2.1 Text
1.2.2 Text
1.3 Identification:
1.3.1 Not Applicable
2. REFERENCES:
2.1 Standard Items
2.2 S9086-T8-STM-010/CH-593, Pollution Control
2.3 S9086-SP-STM-010/CH-542, Gasoline and JP-5 Fuel Systems
2.4 Unified Facilities Guide Specifications-33 65 00, Cleaning Petroleum Storage Tanks
2.5 S9086-CJ-STM-010/CH-075, Fasteners
2.6 S9086-CM-STM-020/CH-078, Gaskets and Packing
3. REQUIREMENTS:
3.1 Open, ventilate, empty, clean, render dry, and maintain any tank or space including adjacent tanks, spaces, or piping systems where the scope of repairs will result in a need for certification during the performance of this Job Order.
3.1.1 Certify and maintain spaces listed in 1.2._ through 1.2._ throughout the availability.
3.1.2 Support inspection of tanks listed in 1.2_ through 1.2_ by Government inspectors.
3.1.3 Ventilate harmful vapors, fumes, and mists to the exterior of the vessel.
3.1.4 Submit one legible copy, in approved transferrable media, of a report listing the location, origin, and quantity of each manhole cover removed in 3.1 with respect to its tank, ship's frame and distance off centerline to the SUPERVISOR.
3.1.5 Clean and disinfect each CHT/sewage tank and associated piping in accordance with 2.2.
3.1.5.1 Maintain one system for Ship's Force use at all times.
3.1.5.2 Accomplish the requirements of 009-88 of 2.1.
3.1.5.3 Accomplish the requirements of 009-09 of 2.1 for the
SHIP:
2 of 5 ITEM NO: 992-031
EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.
International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.
certification process.
3.1.6 Clean each tank and associated piping in accordance with 2.3 and 2.4.
3.2 Steam clean each area where the removal of preservative is required.
3.2.1 Install new rust preventative compound conforming to MIL-PRF- 16173, Grade One or 3.
3.2.2 Install new Monel fill and drain plugs conforming to QQ-N-281, Class B, to replace those removed to accomplish steam cleaning.
3.3 Pump tanks containing petroleum products to the low suction level of each tank.
3.3.1 Off-loading or transfering of petroleum products shall be accomplished during daylight hours only.
3.3.2 Hoses, pumps, and containers shall be clean and dry prior to start of off-loading.
3.3.3 Submit one legible copy, in approved transferrable media, of completed Attachment A (inventory schedule-petroleum products) to the
SUPERVISOR.
(V)(G) "VERIFY OF LOAD/TRANSFERRING COORDINATION"
3.4 Coordinate the off-loading or transferring of fluids through the ship's Damage Control Assistant (DCA), via the SUPERVISOR, to maintain ship's stability and to prevent flooding.
3.4.1 Obtain a list from the SUPERVISOR of petroleum soundings for tanks prior to start of pumping operations.
3.5 Clean each bilge of spaces listed in 1.2 free of trash, debris, grease, oily liquids, and other liquid contaminants prior to the initial certification.
3.5.1 Maintain each bilge to a clean, dry condition for the duration of the availability on a 7-day-a-week, 24-hour-a-day basis.
3.5.2 Remove and dispose of an additional ___ gallons of non-hazardous liquids from bilges listed in 1.2, generated by the Navy, after initial cleaning and certification is obtained. Removals shall be measured. Total amount of liquids removed greater or less than the above amount will be the subject of an equitable adjustment.
3.5.2.1 Submit one legible copy, in approved transferrable
media, of a report listing the amount of gallons removed in 3.5.2, responsible source of liquids, and date liquids were removed after each pumping operation.
3.5.3 Remove and install pumping equipment 3 evolutions after space turnover to support the requirements of 3.5.1 and 3.5.2.
(V)(G) "CLEAN AND DRY BILGES"
3.5.4 Prior to space turnover, when directed by the SUPERVISOR, accomplish a final detergent cleaning of each bilge of spaces listed
3 of 5 ITEM NO: 992-031
EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.
International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.
in 1.2, removing all trash, debris, grease, oily liquids, and other liquid contaminants from the bilges.
3.6 Clean each chain locker free of silt, mud, and foreign matter.
3.7 Remove and dispose of liquids, including compensating sea water from compensating fuel tanks, sludge, and debris, in accordance with federal, state, and local laws, codes, ordinances, and regulations.
3.7.1 Accomplish a chemical analysis of liquid waste, sludge, and debris in accordance with applicable federal, state, and local laws, codes, ordinances, regulations, and Naval Facility requirements.
3.7.1.1 One chemical analysis is required for each containment (Engine Room, Space, etc.) or for each type of liquid (fuel oil, JP-5, etc.).
3.7.1.2 Submit one legible copy, in approved transferrable
media, of each analysis to the SUPERVISOR. Also identify the volume of the liquid from which each sample was taken.
3.8 Tank Closure Repairs:
3.8.1 Clean, chase, or tap threaded areas prior to installing covers.
3.8.2 Weld up, drill, and tap a total of ___ stripped manhole cover bolting ring holes for tanks opened in 3.1.
3.8.3 Remove existing and install new a total of ___ missing or broken manhole cover studs for tanks opened in 3.1 conforming to MIL- DTL-1222, Type IV, Grade 304.
3.8.4 Accomplish the requirements of 009-12 of 2.1, including Table _, Column _, Lines One through _.
3.8.5 Remove all paint from seal mating surfaces (both cover and tank ring) prior to 3.8.6.
3.8.6 Accomplish the requirements of 009-32 of 2.1 for surfaces in the vicinity of tank closure, to include manhole ring, sealing area, coaming and flanged areas.
3.9 Inspect each tank for cleanliness and completion of repairs prior to final closing. Document the personnel who were present during the inspection and confirm that they have exited the space prior to closure of tanks, voids, and cofferdams. Designate one person to account for all personnel who may have entered the space.
3.10 Install manhole covers.
3.10.1 Install manhole cover for each tank, using new gaskets in accordance with Table 078-8-2 of 2.6, and new __ CRES washers conforming to FF-W-92, Type A, Grade One, Class B, and new ___ brass nuts conforming to MIL-DTL-1222, Type I, Grade 464, and/or new ___ CRES hex head cap screws conforming to ASTM F 593, Group 1, Alloy 304, or Group 2, Alloy 316.
3.10.1.1 Install new __ CRES bolts conforming to MIL-DTL-1222, Grade 5, Class 316, for flush deck bolted manhole covers.
3.10.1.2 Install new 3/16-inch gaskets in accordance with Table 078-8-2 of 2.6, and new ___ brass hex head nuts conforming to
4 of 5 ITEM NO: 992-031
EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.
International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.
MIL-DTL-1222, Type I, Grade 464, for DDG-51 Class ships' high temperature compartments.
3.10.1.3 Install new __ nickel-copper hex head, self-locking
nuts conforming to NASM-25027 for LSD-41 and LSD-49 Class ships.
3.10.1.4 Install new gaskets in accordance with Table 078-8-2 of 2.6, using gasket sealant conforming to MIL-S-45180, Type II, and new __ CRES 303 nuts conforming to MIL-DTL-1222, Grade 304, and new galvanized steel washers conforming to SAE-1040, for compensating tanks on LHD and LHA Class ships.
3.10.1.5 Install manhole cover for each tank, using new gaskets conforming to MIL-PRF-6855, Class One, Grade 60, and new CRES washers conforming to MS21044C5, and new CRES 316 hex head cap screws conforming to NAS501-5-10A on LCACs.
3.10.1.6 Install access cover for the fresh water tank listed in 1.2._, using new gaskets in accordance with Table 078-8-2 of 2.6, and new CRES washers conforming to NAS1149CO632R, and new CRES 316 hex head cap screws conforming to NAS501-6-11A on LCACs.
3.10.2 Install access cover for each potable water, feedwater, and sewage tank, using new gaskets in accordance with Table 078-8-2 of 2.6, and new __ zinc coated steel nuts conforming to MIL-DTL-1222, Type I, Grade 5, and new __ CRES washers conforming to FF-W-92, Type A, Grade One, Class B.
3.10.3 Determine the proper tightening sequence from Figure 075-4-1 of 2.5 and 078-8.2.3 of 2.6 (078-8.2.3 refers to Figure 078-8-4 to illustrate several bolt tightening patterns).
(V)(G) "VERIFY TORQUE"
3.10.4 Apply 10 percent of the specified torque first to make sure that the parts are solidly together. Then, apply torque in 25 percent increments (i.e., 25, 50, 75 and 100 percent). Reverse previous sequence (i.e., 6, 5, 4, 3, 2, 1), tightening to 100 percent of required torque.
(V)(G) "VERIFY THREAD ENGAGEMENT"
3.11 Verify proper thread protrusion in accordance with 7.5.1 and 8.2.3 of 2.5.
3.12 Coordinate the filling of the compensating fuel tanks with sea water upon completion of work in accordance with 3.4.
3.12.1 Have Ship's Force engage the compensating water system for the Group of tanks that was emptied. Vent each tank in the Group, starting with the expansion tank and working in order to the receiving tank. Vent each tank until a steady stream of liquid comes from the vent valve.
3.13 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.
4. NOTES:
5 of 5 ITEM NO: 992-031
EXPORT CONTROLLED DATA: This document contains technical information whose export is governed by U.S.
International Traffic in Arms Regulation (ITAR). This information must not be transferred to a foreign person/entity without proper authorization of the U.S. Government. Violations may result in administrative, civil, or criminal penalties.
4.1 None.
5. GOVERNMENT FURNISHED MATERIAL (GFM):
5.1 LLTM:
1. None.
5.2 PUSH MATERIAL:
1. None.
5.3 KITTED MATERIAL:
1. None.
File details come from the government source that posted it. Updated .