Amendment 0005 7179548.pdf

NAVFAC

SPECIFICATION

7179548 Upgrade Restrooms DLA Multiple Bldgs.

MCAS Cherry Point, NC

AMENDMENT #0005

IMPORTANT

This amendment should be acknowledged when your proposal is submitted. Failure to acknowledge the amendment may constitute grounds for rejection of the proposal.

If your proposal has been submitted prior to the receipt of this amendment, acknowledgement should be made by telegram, which should state whether the price contained in your proposal is to remain unchanged, is to be decreased by an amount, or is to be increased by an amount. The acknowledgement must be received prior to proposal opening time.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

0005 12/17/2024 7179548

6. ISSUED BY Code N40085 7. ADMINISTERED BY (If other than item 6.) Code

CG MCAS Cherry Point

FACILITIES, ROICC

B-87, 748 Roosevelt Blvd.

PSC BOX 8006

CHERRY POINT, NC 28533

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION

Upgrade Restrooms DLA Multiple Bldgs.

9B. DATED (SEE ITEM 11)

AMENDMENT MUST BE ACKNOWLEDGED WITH YOUR PROPOSAL 10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning 1 copy of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14. ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATION CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103 (b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER: (specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return original to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

7179548 Upgrade Restrooms DLA Multiple Bldgs., Marine Corps Air Station Cherry Point, NC

Amendment 0005 is being issued to answer pre-award RFI’s.

The deadline to submit pre-award RFI’s has passed. No further RFI’s will be accepted.

The proposal due date of 18 December 2024 at 12:00 PM local time REMAINS unchanged.

See Attached.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR (Same as Item 8) 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV.1-83) 0224-3(10-90)

PREVIOUS EDITION UNUSABLE Prescribed by GSA

Amendment 0005 7179548 Upgrade Restrooms DLA Multiple Bldgs.

RFI Responses:

1. On drawing P‐108 (C1), it shows a Backflow Preventer in the Janitor Room but the Fixture Schedule on P‐501 doesn’t have it listed. Could this please be added to the Fixture Schedule?

Response:

See revised Fixture Schedule on NAVFAC Drawing No. 12882213 with revision date of December 10, 2024. Submit proposals in accordance with RFP, Specifications, Drawings and all amendments.

2. Hazardous materials report shows lead paint on drywall at the men’s restroom/shower area

#465 (drawing A‐103). During the site visit I did not encounter any drywall. All the existing walls were painted brick. Please confirm if there is lead based paint at this restroom.

In the Hazardous Materials Report, the reference to Lead Containing Paint for that area is L‐4, pointing to the ‘Existing Drying Room’ outside the shower. The reference L‐4 is indicated on the Sampling Form as “Steam Service Door Paint” at 28 SF in area. Submit proposals in accordance with RFP, Specifications, Drawings and all amendments.

3. Hazardous materials / lead – Will all lead need to be remediated in the project area or just the areas affected by demolition? Not all the of lead positive walls/floors are being demolished, just a section to accommodate new work.

No specific scope of work for abatement is included. The Hazardous Materials report is provided such that the KTR may be aware of existing hazardous materials, should the scope of work require that they encounter such materials. Submit proposals in accordance with RFP, Specifications, Drawings and all amendments.

4. Looking at Drawing P‐104 Detail C1, it is unclear as to where the domestic water starts.

There does not appear to be a line of delineation that shows where the domestic cold water connects to the existing cut‐off point. Looking at Detail A1 (B147 Riser‐Water) on drawing P‐701, it does not show where the domestic cold water connects to the existing piping (demo point) It is unclear as to where the domestic water demo/reconnection point occurs, and it is unclear as to what size domestic cold water pipe diameter shall be where it connects. Can we get this information added in an addendum so that we know where to make this connection point?

See Amendment 003. Submit proposals in accordance with RFP, Specifications, Drawings and all amendments.

5. Looking at drawing P‐105 detail C3 (Partial Construction Plan, Bldg. 147‐ Waste and Vent it is unknown as to where the vent terminates. This drawing does not show where the sanitary

Amendment 0005 7179548 Upgrade Restrooms DLA Multiple Bldgs.

sewer vent exits the room/building. Looking at Detail C4 (B147 Riser‐Waste & Vent) the detail does not show where the vent ties into the existing vent or exits the room/building.

Where this vent terminates is unclear. May we get the vent termination point added to the drawing set via an amended drawing so that we know where this vent ends?

6. Looking at drawing P‐10 detail C3 (Partial Construction Plan, Bldg. 148‐ Waste and Vent it is unknown as to where the vent terminates. This drawing does not show where the sanitary sewer vent exits the room/building. Looking at Detail C3 (B148 Riser‐Waste & Vent) the detail does not show where the vent ties into the existing vent or exits the room/building.

Where this vent terminates is unclear. May we get the vent termination point added to the drawing set via an amended drawing so that we know where this vent ends?

7. Looking at drawing P‐107 Detail C1 (Partial Construction Plan, Bldg. 150‐Water) it is unclear as to what the distance between bathrooms 150‐D and 150‐E is. It appears that the domestic water will exit room 150‐E and continue to enter room 150‐D. The area between the two bathrooms does not appear to be shown in the drawings. What is the total lineal footage between these two bathrooms?

8. Does the project require installation of sprinklers only in the bathroom, or do they need to be installed throughout the building?

Response: Sprinklers must be installed where noted on the drawings.

Submit proposals in accordance with RFP, Specifications, Drawings and all amendments.

Subj: AMENDMENT TO WO 7179548, Upgrade Restrooms DLA Dist Multiple Buildings, MCAS CHERRY POINT NC

CONTINUATION SHEET

DOCUMENT 00 01 15

1.2 CONTRACT DRAWINGS

The following drawings are revised as of 10 Dec 2024:

NAVFAC DWG NO. TITLE

12882213 PLUMBING RISERS

These drawings accompany this Amendment.

BASIS OF DESIGN FIXTURE SPECIFICATIONSWASTEHWCW

PIPE SERVICE AND CONN. SIZE

MARK DESCRIPTION

PLUMBING FIXTURE SCHEDULE

WCO WALL CLEAN OUT

SA SHOCK ABSORBER

VB VACUUM BREAKER

WALL CLEANOUT, COATED CAST IRON BODY WITH GAS AND WATERTIGHT ABS TAPERED THREAD

PLUG AND ROUND SMOOTH STAINLESS STEEL ACCESS COVER WITH SECURING SCREW.

WATER HAMMER ARRESTOR TO MEET ALL REQUIREMENTS OF ASSE 1010 AS REQUIRED BY 2018

IPC, PLUMBING CODE, SECTION 604.9.

VACUUM BREAKER TO MEET ALL REQUIREMENTS OF ASSE 1011 AS REQUIRED BY 2018 IPC,

PLUMBING CODE, SECTION 608.13.6.

MARK DESCRIPTION BASIS OF DESIGN FIXTURE SPECIFICATIONS

PLUMBING ACCESSORIES SCHEDULE

VENT

2"3/4"P-4 -

0.125 GPF WHITE VITREOUS CHINA URINAL, WASHOUT URINAL, 3/4" TOP SPUD.

VALVE: 0.125 GPF, HARDWIRED, SENSOR-OPERATED DIAPHRAGM TYPE VALVE.

MOUNT RIM AT 17" AFF TO MEET ADA REQUIREMENTS.

URINAL

WALL MTD.

ADA

2"

P-1

LOCATIONTAG TYPE

ABOVE SERVICE SINK

WATER HEATER SCHEDULE

DOMESTIC WATER

HEATER

ELECTRIC WATER HEATER, 20 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

DESCRIPTION

D-WH-1

EXPANSION TANK 2 GALLON CAPACITY, FIELD-ADJUSTABLE 40-PSI AIR CHARGE,

MAXIMUM WORKING PRESSURE OF 150 PSI AND MAXIMUM

TEMPERATURE OF 180° F.

ET-1

FCO FLOOR CLEAN OUT FLOOR CLEANOUT, COATED CAST IRON BODY WITH GAS AND WATERTIGHT ABS TAPERED THREAD

PLUG AND ROUND SCORIATED POLISHED NICKEL BRONZE TOP ADJUSTABLE TO FINISH FLOOR.

4"1-1/4"

P-2

1.28 GPF WHITE VITREOUS CHINA WATER CLOSET WITH ELONGATED BOWL, SIPHON JET FLUSHING, 1-1/2" TOP SPUD, 12" ROUGH-IN, 18" HIGH, & 2 BOLT CAPS.

SEAT: HEAVY DUTY ELONGATED WHITE OPEN FRONT SEAT.

VALVE: 1.28 GPF, HARDWIRED, SENSOR-OPERATED DIAPHRAGM TYPE VALVE.

WATER CLOSET

FLR. MTD.

ADA

2"

4"1-1/4"

P-3

1.28 GPF WHITE VITREOUS CHINA WATER CLOSET WITH ELONGATED BOWL, SIPHON JET FLUSHING, 1-1/2" TOP SPUD, 12" ROUGH-IN, 15" HIGH, & 2 BOLT CAPS.

SEAT: HEAVY DUTY ELONGATED WHITE OPEN FRONT SEAT.

VALVE: 1.28 GPF, HARDWIRED, SENSOR-OPERATED DIAPHRAGM TYPE VALVE.

WATER CLOSET

FLR. MTD. 2"

2"3/4" -

URINAL

WALL MTD.

ADA

2"

0.125 GPF WHITE VITREOUS CHINA URINAL, WASHOUT URINAL, 3/4" TOP SPUD.

VALVE: 0.125 GPF, HARDWIRED, SENSOR-OPERATED DIAPHRAGM TYPE VALVE.

MOUNT RIM AT 24" AFF.

1/2"1/2" 2"P-5

LAVATORY

UNDERCTR-MTD.

UNDERCOUNTER-MOUNTED, SOLID-SURFACE LAVATORY.

TRAP & SUPPLIES: 17 GA. 1 1/4" X 1 1/2" P-TRAP AND NIPPLE & ANGLE SUPPLY STOPS.

FAUCET: HARDWIRED, SENSOR-OPERATED FAUCET WITH GRID WASTE ASSEMBLY AND 0.5 GPM FLOW RESTRICTOR.

PROVIDE ASSE 1070 THERMOSTATIC MIXING VALVE UNDER LAVATORY.

2"

HB HOSE BIBB HOSE BIBB WITH LOOSE TEE KEY OPERATION AND VACUUM BREAKER

DOMESTIC WATER

HEATER

ELECTRIC WATER HEATER, 50 GALLON STORAGE,

6,000 kW INPUT, 24 GPH RECOVERY @ 90° F RISE.

D-WH-2

1/2"1/2" 3"P-6

SERVICE SINK

FLR-MTD. 2"

-1/2" 2"P-7

ELECTRIC WATER

COOLER 2"

TP TRAP PRIMER PRESSURE DROP ACTIVATED WITH SYSTEM OPERATING RANGE FROM 20 psi TO 80 psi

SINGLE WHEEL CHAIR TYPE WALL MOUNTED WATER COOLER WITH HERMETICALLY SEALED AND AIR COOLED REFRIGERATING UNIT, WITH ELECTRIC PUSH BUTTON ON FRONT & SIDE, COLORED VINYL COVERED STEEL SKIRT & STAINLESS STEEL HOOD-RECEPTOR, WITH BOTTLE FILLING STATION. MOUNT SPOUT AT 36" A.F.F.

SERVICE SINK WITH FLOOR-MOUNTED TRAP.

FAUCET: SERVICE FAUCET WITH 3/4" HOSE THREAD ON SPOUT AND INTEGRAL VACUUM BREAKER

1/2"1/2" 2"P-8

EMERGENCY

EYEWASH 2"

EMERGENCY EYEWASH STATION WITH HIGHLY VISIBLE PUSH HANDLE ACTIVATION.

PROVIDE THERMOSTATIC MIXING VALVE WITH UNIT TO DELIVER TEPID WATER PER UFC 3-420-01.

1/2"1/2" 2"P-9 SHOWER 2"

SOLID SURFACE SHOWER PAN WITH TILE WALLS.

PROVIDE TEMPERATURE AND BALANCING MIXING VALVE WITH 1.5 GPM SHOWER HEAD.

1/2"1/2" 2"P-10

SINK

UNDERCTR-MTD.

UNDERCOUNTER-MOUNTED, SOLID-SURFACE SINK.

TRAP & SUPPLIES: 17 GA. 1 1/4" X 1 1/2" P-TRAP AND NIPPLE & ANGLE SUPPLY STOPS.

FAUCET: MANUAL, TWO-HANDLE FAUCET WITH GRID WASTE ASSEMBLY AND 1.75 GPM FLOW RESTRICTOR.

2"

1/2"P-11

ICE MAKER

BOX

ADJACENT TO RM 145-A

LOCATIONTAG TYPE

WATER HEATER SCHEDULE

DESCRIPTION

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-1

UNDER LAVATORY

IN UNISEX 146-A

ELECTRIC WATER HEATER, 20 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

ABOVE SERVICE SINK

IN JANITOR 147-C

DOMESTIC WATER

HEATER

D-WH-3 MOUNTED ON FLOOR

IN CORRIDOR 147-E

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 8.3 kW INPUT.

I-WH-2

UNDER LAVATORY

IN MEN 147-A

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 8.3 kW INPUT.

I-WH-3

UNDER LAVATORY

IN WOMEN 147-B

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 8.3 kW INPUT.

I-WH-4

UNDER LAVATORY

IN MEN 150-D

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 8.3 kW INPUT.

I-WH-5

UNDER LAVATORY

IN WOMEN 150-E

DOMESTIC WATER

HEATER

D-WH-4 ELECTRIC WATER HEATER, 20 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

ABOVE SERVICE SINK

IN JANITOR 150-C

DOMESTIC WATER

HEATER

D-WH-5 MTD ABOVE CEILING

OF MEN 159-F

ELECTRIC WATER HEATER, 20 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

DOMESTIC WATER

HEATER

D-WH-6 MOUNTED ON FLOOR

IN JANITOR CLOSET

ELECTRIC WATER HEATER, 20 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

NEXT TO WOMEN 159-L

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-6

UNDER LAVATORY

IN HEAD 159-E

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-7

UNDER LAVATORY

IN MEN 159-H

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-8

UNDER LAVATORY

IN WOMEN 159-J

DOMESTIC WATER

HEATER

D-WH-7 ELECTRIC WATER HEATER, 10 GALLON STORAGE,

2,500 kW INPUT, 11 GPH RECOVERY @ 90° F RISE.

ABOVE SERVICE SINK

IN UNISEX 4246-A

PROVIDE FOR ALL

D-WH-1 THRU D-WH-8

LOCATIONS

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-9

UNDER LAVATORY

IN WOMEN 147-J

INSTANTANEOUS

WATER HEATER

INSTANTANEOUS ELECTRIC WATER HEATER, 208V,

SINGLE PHASE, 4.1 kW INPUT.

I-WH-10

UNDER LAVATORY

IN MEN 147-K

ICE MAKER BOX PROVIDED WITH WATER HAMMER ARRESTOR AND QUARTER TURN BALL VALVE.

-1/2" 2"P-12 2" BI-LEVEL WHEEL CHAIR TYPE WALL MOUNTED WATER COOLER WITH HERMETICALLY SEALED AND AIR COOLED REFRIGERATING UNIT, WITH ELECTRIC PUSH BUTTON ON FRONT & SIDE, COLORED VINYL COVERED STEEL SKIRT & STAINLESS STEEL HOOD-RECEPTOR, WITH BOTTLE FILLING STATION. MOUNT SPOUT ON HIGHEST SIDE AT 36" A.F.F.

ELECTRIC WATER

COOLER

1/2"1/2" 3"P-13

MOP SINK

FLR-MTD. 2"

MOP SINK WITH TERRAZZO BASIN.

FAUCET: SERVICE FAUCET WITH 3/4" HOSE THREAD ON SPOUT AND INTEGRAL VACUUM BREAKER

1/2"1/2" 2"P-14

SERVICE SINK

ON LEGS 2"

DOUBLE-BOWL FIBERGLASS SERVICE SINK MOUNTED ON LEGS.

FAUCET: SERVICE FAUCET WITH 3/4" HOSE THREAD ON SPOUT AND INTEGRAL VACUUM BREAKER

BFP BACKFLOW REDUCED PRESSURE ZONE (RPZ) TYPE BACKFLOW PREVENTERPREVENTER

A

B

C

D

1 2 3 4 5

1 2 3 4 5

A

B

C

D

UNCLASSIFIED//FOR OFFICIAL USE ONLY

U N

C

LA

S S

IF

IE

D

FO

R

O

FF

IC

IA

L U

S E

O N

LY

U N

C

LA

S S

IF

IE

D

FO

R

O

FF

IC

IA

L U

S E

O N

LY

UNCLASSIFIED//FOR OFFICIAL USE ONLY

AS NOTED

N A

V A

L

FA

C

IL

IT

IE

S E

N G

IN

E

E R

IN

G

C O

M M

A N

D

M

ID

A

TL

A N

TI

C

U P

G R

A D

E R

E S

TR

O

O M

S D

LA

D

IS

T.

M U

LT

IP

LE

B

U

IL

D

IN

G S

M A

R

IN

E C

O R

P S

A

IR

S

TA

TI

O

N C

H E

R R

Y P

O

IN

T C

H E

R R

Y P

O

IN

T, N

C

DLBPRC PRC

P

LU

M B

IN

G

R

IS

E R

S

12882213

P-501

AM

EN

DM

EN

T

D

EC

DANNY L . BRUSH

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text Fax 871-5620

AutoCAD SHX Text 919-871-1070

AutoCAD SHX Text Raleigh, North Carolina 27609

AutoCAD SHX Text 3516 Bush Street, Suite 200

AutoCAD SHX Text www.crenshawconsulting.com

AutoCAD SHX Text

LICENSE #

AutoCAD SHX Text

DEPARTMENT OF THE NAVY

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

STA. PROJ. NO.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

NAVAL FACILITIES ENGINEERING COMMAND

AutoCAD SHX Text

DES

AutoCAD SHX Text

DRW

AutoCAD SHX Text

SYM

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPR

AutoCAD SHX Text

DRAWFORM REVISION: 10 MARCH 2009

AutoCAD SHX Text

CHK

AutoCAD SHX Text

SATISFACTORY TO

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

ACTIVITY

AutoCAD SHX Text

DATE

AutoCAD SHX Text

FOR COMMANDER NAVFAC

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

A/E INFO

AutoCAD SHX Text

OF

AutoCAD SHX Text

EPROJECT NO.

AutoCAD SHX Text C-1156

AutoCAD SHX Text

NC

AutoCAD SHX Text

IPT MARINE CORPS

AutoCAD SHX Text

NAVAL STATION - NORFOLK, VA

AutoCAD SHX Text

PM/DM

AutoCAD SHX Text

BRANCH MANAGER

AutoCAD SHX Text

CHIEF ENG/ARCH

AutoCAD SHX Text

FIRE PROTECTION

AutoCAD SHX Text 033773

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text H

AutoCAD SHX Text T

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text L

AutoCAD SHX Text O

AutoCAD SHX Text S

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text O

AutoCAD SHX Text R

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text

SEAL