Hardware_For-Reference-Only.pdf

Hardware Schedule Project ID: 20235 Bldg X-132 JECC 5th Floor Renovation

Heading #: 1 1 SGL Door: LH530B SUITE TO OFFICE

1 SGL Door: RH534B OPEN OFFICE TO J3 TECH

1 SGL Door: LH535C OPEN OFFICE TO OFFICE

1 SGL Door: LH535D OPEN OFFICE TO OFFICE

1 SGL Door: LH545 I.T. OFFICE TO AV / SERVER 3'0" x 7'0" x 1 3/4" HMD/HMF

EA HINGE 630 (HI-2) HAGER CO.15 BB1199 4-1/2" x 4-1/2"

EA LOCKSET 626 (LO-2) BEST ACCESS5 9K3 7R 15D S3 [CLASSROOM]

EA WALL STOP 630 (ST-1) ROCKWOOD MFG5 409 (CONCAVE)

EA SILENCER (SI-1) ROCKWOOD MFG15 608 [MD]

Heading #: 2 1 SGL Door: RHR572 SWING SPACE FR SERVER RM

3'0" x 7'0" x 1 3/4" HMD/HMF

EA HINGE 630 (HI-1) HAGER CO.3 BB1199 4-1/2" x 4-1/2" NRP

EA LOCKSET 626 (LO-1) BEST ACCESS1 9K3 7D 15D S3 LM [STOREROOM]

EA CLOSER 689 (CL-2) BEST ACCESS1 HD8016 AF80P PC [MOUNT PARALLEL ARM]

EA SILENCER (SI-1) ROCKWOOD MFG3 608 [MD]

EA KICKDOWN STOP 626 (OT-1) ROCKWOOD MFG1 461L

Heading #: 3 1 PR Door: RHRA/LHR571 SWING SPACE FR MECH

2-3'0" x 7'0" x 1 3/4" HMD/HMF

EA HINGE 630 (HI-1) HAGER CO.6 BB1199 4-1/2" x 4-1/2" NRP

SET AUTO FLUSH BOLT 626 (BO-2) ROCKWOOD MFG1 2845 (SELF LATCHING)

EA DUST PRF STRIKE 626 (BO-3) ROCKWOOD MFG1 570

EA LOCKSET 626 (LO-1) BEST ACCESS1 9K3 7D 15D S3 LM [STOREROOM]

EA CLOSER 689 (CL-2) BEST ACCESS2 HD8016 AF80P PC [MOUNT PARALLEL ARM]

EA SILENCER (SI-1) ROCKWOOD MFG2 608 [MD]

EA KICKDOWN STOP 626 (OT-1) ROCKWOOD MFG2 461L

Heading #: 4 1 SGL Door: RH573 SWING SPACE TO TEMP OFFC

1 SGL Door: RH574 SWING SPACE TO TEMP OFFC

1 SGL Door: RH575 SWING SPACE TO TEMP OFFC

1 SGL Door: RH576 SWING SPACE TO TEMP OFFC

1 SGL Door: RH577 SWING SPACE TO TEMP OFFC

1 SGL Door: RH578 SWING SPACE TO TEMP OFFC

1 SGL Door: LH579 SWING SPACE TO TEMP OFFC

1 SGL Door: LH580 SWING SPACE TO TEMP OFFC

1 SGL Door: RH581 BREAK OUT TO TEMP ED

1 SGL Door: RH582 BREAKOUT TO TEMP CV

1 SGL Door: LH583 BREAKOUT TO TEMP CG 3'0" x 7'4" x 1 3/4" OD/OF

EA I.C. CORE 626 (CY-3) BEST ACCESS11 1C7

BALANCE OF HARDWARE BY MODULAR PANEL SYSTEM SUPPLIER

Page 1 of 2 11/2/2020 12:09:39 PM

Hardware Schedule Project ID: 20235 Bldg X-132 JECC 5th Floor Renovation

Heading #: 5 1 SGL Door: Slider529 OPEN OFFICE TO GUEST OFFICE

1 SGL Door: Slider530A OPEN OFFICE TO SUITE

1 SGL Door: Slider531 OPEN OFFICE TO OFFICE

1 SGL Door: Slider532 OPEN OFFICE TO COLLAB

1 SGL Door: Slider533 OPEN OFFICE TO OFFICE

1 SGL Door: Slider538 OPEN OFFICE TO OFFICE

1 SGL Door: Slider539 OPEN OFFICE TO OFFICE

1 SGL Door: Slider540 OPEN OFFICE TO OFFICE 3'0" x 7'0" x 1 3/4" OD/OF

EA MORTISE CYL. 626 (CY-1) BEST ACCESS8 1E74

BALANCE OF HARDWARE BY ALUM SLIDING DOOR SUPPLIER

Heading #: 6 1 PR Door: Slider521 RECEPTION TO JAG

6'0" x 7'0" x 1 3/4" OD/OF

EA MORTISE CYL. 626 (CY-1) BEST ACCESS1 1E74

BALANCE OF HARDWARE BY ALUM SLIDING DOOR SUPPLIER

Page 2 of 2 11/2/2020 12:09:39 PM

Stanley Security Solutions, Inc. • www.stanleysecurity.com • Phone: (855) 365-2407 • Fax: (877) 835-1030 104 Price List 65BST

KEYING REQUEST INFORMATION FORM

MUST BE SUBMITTED WITH COMPLETE INFORMATION,

INCLUDING P.O. & HARDWARE SCHEDULE

Quote #: _____________________________________________ Discount %: ____________________________________________

P.O. #: ______________________________________________ Price List: ______________________________________________

REQUIRED INFORMATION REGARDING STANLEY DISTRIBUTOR

Distributor: _______________________________________________________________________________________________________

Distributor P.O. #: _________________________________________________________________________________________________

Distributor Account #: _______________________________________________________________________________________________

Project Manager: __________________________________________________________________________________________________

Project Manager Mobile: ________________________________ Project Manager Email: ___________________________________

Address: ________________________________________________________________________________________________________

City, State, Zip: ___________________________________________________________________________________________________

Phone: ______________________________________________ Fax: __________________________________________________

REQUIRED INFORMATION REGARDING PROJECT CONTRACTOR

Contractor: ______________________________________________________________________________________________________

Job Name*: ______________________________________________________________________________________________________

Contact Person: ___________________________________________________________________________________________________

Contact Mobile: ______________________________________ Contact Email: __________________________________________

REQUIRED INFORMATION REGARDING THE END USER

Company*: ______________________________________________________________________________________________________

Contact Person*: __________________________________________________________________________________________________

Contact Phone: _______________________________________ Contact Email: __________________________________________

School Name (if applicable): _________________________________________________________________________________________

School District (If applicable): ________________________________________________________________________________________

Permanent Core Due Date*: _________________________________________________________________________________________

Building Turnover Date: _____________________________________________________________________________________________

Project Address*: __________________________________________________________________________________________________

City, State, Zip*: __________________________________________________________________________________________________

Phone*: ____________________________________________ Fax: __________________________________________________

End User Customer #: ___________________________________ Masterkey Account #: _____________________________________

Keyway: _____________________________________________

CUSTOMER

NUMBER:

If received

NOTE: Failure to provide complete and accurate end user information will result in delays in processing and supply of permanent core and key orders. Failure to include this form with your order and the hardware schedule may result in the order being processed “less core”.

*Required Field hazel.lai Inserted Text www.hagerco.com18

FULL MORTISE

FIVE KNUCKLE HINGES

BB1168

Ball Bearing - Heavy Weight Steel with steel pin (ANSI A8111)

BB1199

Ball Bearing - Heavy Weight

• Brass with stainless steel pin

(ANSI A2111) or stainless steel with stainless steel pin (ANSI A5111)

• Four ball bearings

• Non-rising removable pin with button tip and plug

• For use on heavy weight doors or doors requiring high frequency service

Hinge Size Gauge of Metal

Hole Count

Screw Size

Inches mm Machine Wood

4-1/2 x 4 114 x 102 0.180 8 1/2 x 12-24 1-1/4 x 12

4-1/2 x 4-1/2 114 x 114 0.180 8 1/2 x 12-24 1-1/4 x 12

5 x 4 127 x 102 0.190 8 1/2 x 12-24 1-1/4 x 12

5 x 4-1/2 127 x 114 0.190 8 1/2 x 12-24 1-1/4 x 12

5 x 5 127 x 127 0.190 8 1/2 x 12-24 1-1/4 x 12

6 x 4-1/2 152 x 114 0.203 10 1/2 x 1/4-20 1-1/2 x 14

6 x 5 152 x 127 0.203 10 1/2 x 1/4-20 1-1/2 x 14

6 x 6 152 x 152 0.203 10 1/2 x 1/4-20 1-1/2 x 14

8 x 6 203 x 152 0.203 16 1/2 x 1/4-20 1-1/2 x 14

8 x 8 203 x 203 0.203 16 1/2 x 1/4-20 1-1/2 x 14

WTBB1168

Ball Bearing - Heavy Weight - Wide Throw Steel with steel pin (ANSI A8111)

WTBB1199

Ball Bearing - Heavy Weight - Wide Throw

• Brass with stainless steel pin

(ANSI A2111) or stainless steel with stainless steel pin (ANSI A5111)

• Wide throw

• Four ball bearings

• Non-rising removable pin with button tip and plug

• For use on heavy weight doors or doors requiring high frequency service

Hinge Size Gauge of Metal

Hole Count

Screw Size

Inches mm Machine Wood

4-1/2 x 5 114 x 127 0.180 8 1/2 x 12-24 1-1/4 x 12

4-1/2 x 6 114 x 152 0.180 8 1/2 x 12-24 1-1/4 x 12

4-1/2 x 7 114 x 178 0.180 8 1/2 x 12-24 1-1/4 x 12

4-1/2 x 8 114 x 203 0.180 8 1/2 x 12-24 1-1/4 x 12

5 x 6 127 x 152 0.190 8 1/2 x 12-24 1-1/4 x 12

5 x 7 127 x 178 0.190 8 1/2 x 12-24 1-1/4 x 12

5 x 8 127 x 203 0.190 8 1/2 x 12-24 1-1/4 x 12

Note: Optional concealed bearings available, see page 5 for options.

hdavenhill Rectangle www.hagerco.com6

GENERAL INFORMATIONGENERAL

Swaging Swaging is a slight offset of the hinge leaf at the barrel. This offset permits the leaves to come closer together when the door is in the closed position. If the hinge were to be left in the natural state after the knuckle was rolled, the hinge would be referred to as a “flatback”. A flatback hinge has a gap between the leaves of approximately 5/16” (7.9 mm).

This would allow heat and air-conditioning to escape, not to mention the unsightly gap between the door and frame.

Standard gap (Swag) is 1/16”, specify “O” Swag for no gap.

The swaging on standard weight and heavy weight full mortise hinges provides 1/16” (1.6 mm) clearance between the leaves when the leaves are in the closed position.

Full mortise hinges used on beveled doors will affect lockside clearance, especially for wide throw applications.

Security Features Three additional features that are commonly used are: Non- Removable Pin (NRP), Safety Stud (SH), and Reverse Security Stud (RSS). These features are intended as deterrents only.

Non-Removable Pin The Non-Removable Pin (NRP) hinge barrell is drilled and tapped to receive a small set screw which is tightened against the hinge pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat.

The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.

Safety Stud The Safety Stud (SH) 3/16” (4.8 mm) projection is a feature that places a stud on one leaf and a locking hole on the other leaf. When the door is closed, the stud is anchored into the opposite leaf.

Even if the hinge pin is removed, the door is secure because the leaves are locked together.

Reverse Security Stud The Reverse Security Stud (RSS) 7/16” (11.1 mm) projection is a feature that has a welded stud projecting from the back of both leaves into the reinforcing plate of both the frame and the door. It is intended to keep the hinge locked in place from abuse of battering or trying to shear the hinge and screws.

This feature is primarily used in prisons and psychiatric areas.

Tip Styles

Flat Button Tip (ET - 3 Knuckle)

Tri-Con Flush Pin Hospital Tip (HT)

Acorn Tip Ball Tip Steeple Tip

Urn Tip Fast Riveted Pin

(FRP)

2 9K Series Heavy Duty Cylindrical Locks – Levers

Features

1. For versatile applications, lever by knob trim variations are available.

2. Rose locking pin and rose as sem bly design offers great torque re sis tance. It pre vents the locking pin from twisting, bending, or breaking under attack.

3. The innovative design of the slotted key re lease cam and lock ing lug as sem bly create maximum attack resistance. Even though damaged, the lock still allows key access. In addition, the lever is fully functional from the inside. The hub-mounted torsion spring and strong retractor springs help prevent lever sag and offer a smooth and snappy operation.

4. Strong through-bolt mount ing studs increase torque resistance. Heavy rose liner material is highly attack resistant.

5. Strong retractor springs pro vide resistance to lever sag.

6. Zinc hubs with a shrouded lock ing lug, guaranteeing higher quality and increased torque re sis tance.

7. The outside lever sleeve is a seamless one piece construction made of a hardened steel alloy that provides additional reinforcement in the locking lug slot.

8. Lost Motion feature available allowing 45º lever rotation in either direction without engaging retractor assembly.

9. Interchangeable core allows for quick re-key ing and customized masterkeying.

TABLE OF CONTENTS

Features Specifications .......................................................................2-3 How to Order Shipping Weights Lever Styles & Trim CORMAX™ Patented Keying System

Deadlocking Latches & Strikes Lever Features & Dimensions Function .................................................................................6-9 Strike & Door Prep a ra tion 9K Sample Specifications Service Equipment

Specifications ADA–Americans With Disabilities Act: 9K series – The design and operation of the BEST® cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6

Builders Hardware Manufacturers Association: 9K series – Listed by BHMA for A156.2, Series 4000, Grade 1.

Underwriters Laboratories®: 9K series – Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors.

Florida Building Code and Miami-Dade County Code: 9K series – 9/16” latch throw – Listed by Florida Building Code and Miami- Dade County at ± 75 PSF for single doors. 9K series – 3/4” latch throw – Listed by Florida Building Code and Miami Dade County at ± 80 PSF for single doors and ± 50 PSF for double doors.

“WS” option must be ordered for the lock to include a “Miami-Dade County Product Control Approved” label for inspection purposes.

California State Fire Marshal: 9K series – Listed with California State Fire Marshal.

9K series 14 & 15 lever conforms with California Title 24.

2 3 4

5 6 7 8 9

9K – EXPLODED

39K Series Heavy Duty Cylindrical Locks – Levers

How to Order

* Handles are made from a zinc alloy, and have been plated to be equivalent in appearance to the finishes listed.

For information on 9K non-IC products please refer to BEST’s non-IC keying products brochure.

**RQE option requires modification to chassis and is sold with assembly unit only.

9K 3 7 AB 15 A STK 626

Series Backset Core Housing

Function Code

Lever Rose Style

Strike Package

Standard Finishes

Options

9K 3 – 2 3/4” 4 – 3 3/4” 5 – 5”

0– keyless 7– 7-pin housing accepts all BEST® cores

AB– entrance D– storeroom L– privacy N– passage R– classroom etc.

14– curved return

15– contour angle return

16– curved no return

C– 3” convex D– 3 1/2” convex K– 3” convex

- no ring L– 3 1/2” convex

- no ring

STK– 2 3/4”

ANSI

S3– 4 7/8”

ANSI

S3– 7/8- 7/8” flat strike

605 606 611 612 613 618 619 622 625 626

AL– abrasive lever LL– lead lined LM– lost motion RQE– request to exit** SH– security head screws TL– tactile lever 3/4– 3/4” throw latch 7/8” LTC– flat lip strike NOTE: specify inside (I), outside (O), or both (B) for AL,TL options pages 6-9 pages 4-5 pages 4-5 page 11 page 5

Backset – 2 3/4” stan dard, 3 3/4” and 5” avail able.

Chassis – Critical latch and chassis components are brass or cor ro sion-treated steel. 2 1/16” di am e ter to fit 2 1/8” hole in door (Conforms to ANSI A115.2). Lost Motion feature available as an option. (see page 5 for options/features).

Door thickness – Available for 1 3/4” to 2 1/4” doors only. Spacers available for 1 3/8” doors.

Roses – C – 3” Con vex, D – 3 1/2” Convex, K – 3” Convex-no ring, L – 3 1/2” Convex-no ring

Products protected by one or more of the following pat ents – 5,590,555 5,794,472 Other products patent pending.

Finishes –

Antimicrobial Finish – 626AM satin chrome plated with UltraShield™ antimicrobial protected coating

The BEST UltraShield™ finish inhibits the growth of bacteria and other microbes on the surface of the hardware.

NOTE: BEST's UltraShield™ option is recommended for use on any hardware application where product cleanliness is a high priority. i.e;. Hospital/Healthcare, Elderly Care, Education, Transportation, Food-Service, Hospitality.

Latch – Solid brass 9/16” throw. Front 2 1/4” x 1 1/8” beveled.

Lever handles – Lever handles are a high-quality zinc alloy. Trim components are brass or bronze. Body is approximately 5/8” in di am e ter; Handle is ap prox i mate ly 4 3/4” long (from center-line of chassis). #14 and #15 levers conform to Cal i for nia Administrative Code Title 19 and Title 24. All three styles of levers conform to the Illinois Accessibility Standard.

Mounting – In addition to standard door preparation (ANSI A115.2 for 1 3/4” doors), two additional holes are needed for through-bolts.

Through-bolts require two 5/16” diameter holes located at 12 o’clock and 6 o’clock positions. A drill jig can be order ed to insure ac cu ra cy of the holes. (see KD303 page 5).

Projection on door – Approx. 2 3/4” when mount ed on 1 3/4” door.

Strike – STK: Conforms to ANSI A115.2 (2 3/4” x 1 1/8” with curved lip & box). S3:

Conforms to ANSI A115.2 for 1 3/4” doors (4 7/8” x 1 1/4” with curved lip). S3-7/8:

Conforms to ANSI A115.2 for 1 /4” doors (4 7/8” x 1 7/8” flat)

(BHMA) US DESCRIPTION

605 3 bright brass 606 4 satin brass 611 9 bright bronze 612 10 satin bronze

(BHMA) US DESCRIPTION

613 10B oxidized satin bronze, oil rubbed 618 14 bright nickel plated 619 15 satin nickel plated

(BHMA) US DESCRIPTION

622 19 flat black 625 26 bright chromium plated 626 26D satin chromium plated 690 20 dark bronze

UltraShield™

4 9K Series Heavy Duty Cylindrical Locks – Levers

Lever Styles and Trim

Shipping Weights The chart is the ap prox i mate shipping weight for the standard 9K func tions locksets. This weight includes the weight of the lockset with the “#15” style lever, “K” style rose, latch, strike package, and box. Listed separately are the ap prox i mate weights for “with core” and “less core” shipments.

Lock Function Nomenclature

Case Quantity Shipping Weight With Core

Shipping Weight Less Core

Y 9 31 lbs

N 9 40 lbs.

L,NX,P 9 40 lbs.

AB,D,E,H,HJ,R,T 9 42 lbs. 40 lbs.

C,G,IN,S,W 9 44 lbs. 40 lbs.

#14C #15C #16C

#14D

#14K

#14L

#15D

#15K

#15L

#16D

#16K

#16L

59K Series Heavy Duty Cylindrical Locks – Levers

Lever & Trim Dimensions

#15D or #15L Trim (”D” rose shown)

#14C or #14K Trim (”C” rose shown)

#16C or #16K Trim (”K” rose shown)

Lever Features Abrasive Lever Option Besides complying with a wide variety of accessibility codes and ordinances, BEST lever handles are avail able with a special abra sive feature. Abrasive strip on the lever im me di ate ly identifies warn ings on doors to hazardous ar eas for the blind.

To order: Designate “AL” on How to Order (page 3). Note: abrasive strip is available on all levers, except #14, #15, #16 levers in 613 finish.

Lost Motion Feature The Lost Motion feature allows the lever handle to move 45 degrees from parallel to the horizontal plane without engaging the latchbolt assembly. When the lockset is in the locked mode, this feature makes over-torque or over-lever-age abuse more difficult to achieve. To order: designate “LM” on How to Order (page 3).

Non IC Lever Option The 9K heavy duty cylindrical lock may be adapted to existing keying systems by using a special retrofit lever and throw member that will accept 6 pin single shear-line cylinders from non BEST manufacturers. No internal modifications are required to adapt the 9K to cylinders from the following manufacturers: Corbin-Russwin, Medeco, Sargent, Schlage, Yale. Refer to BEST® non-IC keying products brochure for more details.

RQE Feature The 9K lever handle cylindrical can be built to incorporate a request-to-exit (RQE) switch. A normally open switch provides momentary switch closure when the inside lever is rotated. RQE option requires modification to chassis and is sold with assembly unit only.

To order: des ig nate “RQE” on How to Order (page 3).

Tactile Lever Option Tactile levers may be used in areas where improved grip is required or as a warning in hazardous areas. Grooves are ma chined into the back of the hand grasp portion of the lever to improve grip and/or to provide a sensory warning in haz ard ous areas. This option can be used for Blind, Safety or Ac ces si bil i ty applications. To order: Designate “TL” on How to Order (page 3).

#14C or #14K Trim (”C” rose shown)

#15D or #15L Trim (”D” rose shown)

#16C or #16K Trim (”K” rose shown)

6 9K Series Heavy Duty Cylindrical Locks – Levers

Description Outside Lever Inside Lever

Function & Diag.

(ANSI No.)

Latch operated by Locked by Unlocked by Locked by

Unlocked by

Single keyed

Entrance (AB) F109 • Rotating the inside lever,

• Rotating the outside lever– only when the inside push button is out,

• Turning the key in the outside lever

• Pushing the inside button,

• Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back

• Turning the key in the outside lever, (only when the button is not turned)

• Rotating the inside lever, (only when the button is not turned).

• Closing the door (only when the button is not turned)

Cannot be locked

Always unlocked

Storeroom (D) F86 • Turning the key in the outside lever,

• Rotating the inside lever

Always fixed Cannot be unlocked Cannot be locked

Always unlocked

Service Station (E) F92 • Rotating the inside lever,

• Rotating the outside lever-only when the inside push button is out.

• Turning the key in the outside lever

• Pushing the inside button,

• Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back

• Turning the key in the outside lever,

• Rotating the inside lever,

• Closing the door-only when the button is not turned,

• Turning back the slotted button

Cannot be locked

Always unlocked

Hotel Guest Room (H) F93

(Indicator Included)

• Rotating the inside lever,

• Turning the key in the outside lever-only when the inside push button is out,

• Removing the core with a control key and using a special emergency key

Always fixed Key block feature is released by:

• Rotating the inside lever,

• Closing the door

Cannot be locked

Always unlocked

Pushing the inside button projects an “occupied” indicator in the outside lever and blocks all operating keys.

Hotel Guest Room (HJ)

(No Indicator)

• Rotating the inside lever,

• Turning the key in the outside lever-only when the inside push button is out,

• Removing the core with a control key and using a special emergency key

Always fixed Key block feature is released by:

• Rotating the inside lever,

• Closing the door

Cannot be locked

Always unlocked

Pushing the inside button blocks all operating keys, but no “occupied” indicator is projected.

Classroom (R) F84 • Rotating the inside lever,

• Turning the key in the outside lever,

• Rotating the outside lever when not locked by key

Turning the key in the outside lever, Turning the key in the outside lever, Cannot be locked

Always unlocked

Dormitory (T) F90 • Rotating the inside lever,

• Rotating the outside lever when not locked by key or push button

• Turning the key in the outside lever,

• Pushing the button on the inside lever

• Turning the key in the outside lever,

• Rotating the inside lever (only when locked by push button),

• Closing the door (only when locked by push button)

Cannot be locked

Always unlocked

Entrance/Office (UA) • Rotating the inside lever,

• Rotating the outside lever– only when the inside push button is out,

• Turning the key in the outside lever

• Pushing the inside button,

• Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back

• Turning the key in the outside lever, (only when the button is not turned)

• Rotating the inside lever, (only when the button is not turned).

Cannot be locked

Always unlocked

Double keyed

Corridor (C) F88 • Rotating the inside lever,

• Rotating the outside lever when not locked by key,

• Turning the key in the outside lever

Turning the key in the inside lever Turning the key in the inside lever

Cannot be locked

Always unlocked

* ATTENTION: Locksets that secure both sides of the door are con trolled by building codes and the Life Safety Code. In an emergency exit situation, failure to quickly unlock the inside lever could be hazardous or even fatal.

hdavenhill Rectangle

10 9K Series Heavy Duty Cylindrical Locks – Levers

8KL5 Deadlocking Latch

Bolt throw – 9/16”

Backset – 5”

Front – 2 1/4” x 1 1/8” beveled.

Tube – To fit 1” diameter hole in door edge.

To order: (with unit) designate “9K5” on How to Order (page 3).

To order: (without unit) designate “8KL5-SL” (Spring Latch) or DL (Deadlocking Latch) and finish.

8KS2 Strike (Supplied Standard)

Dimension: Conforms to ANSI A115.2 for 1 3/8” doors (2 3/4” x 1 1/8” with curved lip and box).

To order: (with unit) designate “STK” on How to Order (page 3).

To order: (without unit) designate 8KS2 and finish.

8KL4 Deadlocking Latch

Bolt throw – 9/16”

Backset – 3 3/4”

Front – 2 1/4” x 1 1/8” beveled.

Tube – To fit 1” diameter hole in door edge.

To order: (with unit) designate “9K4” on How to Order (page 3).

To order: (without unit) designate “8KL4-SL” (Spring Latch) or DL (Deadlocking Latch) and finish.

8KL3 Deadlocking Latch

Bolt throw – 9/16”

Backset – 2 3/4”

Front – 2 1/4” x 1 1/8” beveled.

Tube – To fit 1” diameter hole in door edge.

To order: (with unit) designate “9K3” on How to Order (page 3).

To order: (without unit) designate “8KL3-SL” (Spring Latch) or DL (Deadlocking Latch) and finish.

8KS3 Strike

Dimension: Conforms to ANSI A115.2 for 1 3/4” doors (4 7/8” x 1 1/4” with curved lip).

To order: (with unit) designate “S3” on How to Order (page 3).

To order: (without unit) designate 8KS3 and fin ish.

Deadlocking Latches & Strikes

8KS3–7/8 Flat Strike

Dimension: Conforms to ANSI A115.2 for 1 3/4” doors (4 7/8” x 1 7/8” flat)

To order: (with unit) designate “S3-7/8” on How to Order (page 3).

To order: (without unit) designate 8KS3- 7/8 and fin ish.

CORMAX™ Patented Keying System BEST® CORMAX™ is the premier patented keying system offered by BEST. CORMAX will meet your needs for security, key control, and convenience. A simple solution with no compromising allowed.

CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and it is an essential element of non-residential access control as security administrators strive to eliminate the unauthorized duplication of keys.

CORMAX offers the following features and benefits:

• A long-term US utility patent that guarantees the extended useful life of the system through 2027.

• A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security.

• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature.

• CORMAX cores and keys are available exclusively through BEST sales offices. Key blanks are only sold to individuals authorized by the customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.

• CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A156.5 Grade 1.

• Picking and drilling resistance options are available if higher levels of security are desired.

• Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices.

• Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of masterkey systems in multi-building campuses.

• BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or modified locksets.

CORMAX™

Patented Keying System

2 MORTISE AND

1E Mortise Cylinder Standard mortise applications require use of BEST’s 1E Series cylinders with standard 1E-C4 cam.

BEST cylinders may be altered to function with other manufacturers' locks by use of different cams (see page 8) and different cylinder rings (see page 9). Special cylinder variations are avail-able for most applications (see pages 4 & 5). BEST cylinders are machined from brass or bronze bar stock and are available in a variety of finishes. Additional security is provided by a set screw that mounts diagonally in the cylinder wall and when tightened, holds the cylinder securely in the housing. BEST mortise cylinders feature the BEST interchangeable core and may be masterkeyed into any existing BEST system. Contact your local Best Access Systems sales office for information on special cylinder applications not listed in this catalog.

ECIFICATIO

Specifications

Cylinder Dimension Door Nomenclature “A” Thickness

1E-64 1 1⁄8" 1 5⁄8"to 2 1⁄4" 1E-74 1 1⁄4" 1 7⁄8"to 2 1⁄2"

Cylinder diameter - 1 5⁄32" To order: see below example: 1E74-C4-RP3-626 Products covered by on or more of the following patents:

4,437,695 4,633,690 4,616,394

“A”

TABLE OF CONTENTS Page Page 1E Series Features ................................................................2 Eurocylinders 1E Series Specs/How to Order ..............................................2 Cylinders and Cams 1E Series Rings/Spindles/Mortise Service Equipment ..........3 1E Cylinder Special Rings 1E Series Special Cylinders ..............................................4, 5 5E Series Specs/Accessories 1E7J4/1E7K4 High Security Cylinders ..................................6 5E Series How to Order Patented Keying

“A”

1E SERIES FEATURES

STEP A B C D E F G

1E 7 4 C4 RP3 626 **

Cylinder Core Function Standard Cam or Rings Standard Diameter Housing Code Mortise Spindle Finishes

Length Code

1E– 1 5⁄32" 0– dummy 2– rim Blank– standard C4– standard cam RP1– tapered cyl. 605 606 3E– 1 1⁄2" 6– 6 pin 4– mortise* 22– 1 3⁄8" C181– Adams Rite RP2– 6 pin mortise 612 613 5E– see 7– 7 pin 6– tapered 24– 1 1⁄2"up to MS cam RP3– std. package 622 625 pages 10,11 housing mortise 96– 6" S2– standard RP4– 3E mortise 626 690 8E– see accepts spindle page 7 all Best cores

* For additional special mortise cylinders, see pages 4 and 5.

** Must specify keymark and number of keys or designate L/C for less core.

Specifications

Cylinder Dimension Door Nomenclature “A” Thickness

1E-62 1 3⁄16" 1"to 2 3⁄4" 1E-72 1 11⁄32" 1 1⁄4"to 3"

Cylinder diameter– 1 5⁄32" To order: see below example: 1E72-S2-RP3-626

HOW TO ORDER

E S

E R

IE

S

H O

W T

O O

R D

E R

1E Rim Cylinder Standard rim cylinder applications require the use of BEST’s 1E rim cylinder series. BEST rim cylinders are interchangeable with other manufacturers’ rim cylinders. BEST rim cylinders are machined from solid bar stock and are available in a variety of finishes. The standard package for the BEST rim cylinder includes cylinder, RP3 ring package, 1E-S2 spindle, clamp plate and clamp plate screws. BEST rim cylinders feature the BEST interchangeable core and may be master-keyed into any existing Best system.

see pages 4-5 for special cylinders (see page 4-5)

(For special cams see page 8)

(For special rings see page 9)

Specify hand if required

8 E Series Mortise and Rim Cylinders

Cylinders and Cams Special cams are avail able which will op er ate most mor tise locksets, re gard less of make or func tion. With these cams,your mas ter keyed system can be ex tend ed through the use of re place ment cyl in ders with cams similar to those being used. A few of the cams are il lus trat ed. Other designs are available upon request. All cams available are de signed for use on BEST mortise cylinders.

WARNING– BEST desires to provide up-to-date and reliable product adaptation uses. However, BEST can not guar an tee the quality of other manufacturers’ locksets. In addition, other lock manufacturers’ may make changes to their product that affect the operation and compatibility of our core and cylinder adaptation. When this occurs, those manufacturers’ have no ob li ga tion to notify BEST. If you are using a BEST cylinder in another man u fac tur ers’ lockset and find that it does not operate properly for any reason, please contact your local BEST sales office immediately.

NOTE: Cams not drawn to scale

C161 (when ordered with cyl in der, step E, page 2) 1E - C161 (for cam only)

C191 (when ordered with cyl in der, step E, page 2) 1E - C191 (for cam only)

C208 (when ordered with cylinder, step E, page 2) 1E - C208 (for cam only)

C118 (when ordered with cyl in der, step E, page 2) 1E - C118 (for cam only)

C4 (when ordered with cyl in der, step E, page 2) 1E - C4 (for cam only)

C127 (when ordered with cyl in der, step E, page 2) 1E - C127 (for cam only)

C128 (when ordered with cyl in der, step E, page 2) 1E - C128 (for cam only)

C136 (when ordered with cylinder, step E, page 2) 1E - C136 (for cam only)

C129 (when ordered with cylinder, step E, page 2) 1E - C129 (for cam only)

C265 (when ordered with cylinder, step E, page 2) 1E - C265 (for cam only)

C258 (when ordered with cylinder, step E, page 2) 1E - C258 (for cam only)

C210 (when ordered with cyl in der, step E, page 2) 1E - C210 (for cam only)

C181 (when ordered with cyl in der, step E, page 2) 1E - C181 (for cam only)

NOTE: While certain functions may require a different cam, in general the following cams will work for these common applications.

C4 – Standard cam

C127 – Arrow mortise (latch)

C161 – Corbin-Russwin mortise Arrow mortise (deadbolt)

C181 – Adams Rite

C191 – BEST 30H mortise (latch)

C208 – Sargent

C258 – BEST 45H mortise

C258 – BEST 30H mortise (deadbolt)

C265 – Schlage L mortise

E14

800-458-2424 | www.rockwoodmfg.com Check the web site for the up-to-date catalog

Copyright © 2012-2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

Ro ck w oo d Au to m at ic

C om bi na ti on F lu sh

B ol ts

Automatic Flush Bolts No. 2840 (Automatic Top Bolt Only) No. 2842 (Set) (replaces the No. 1840 and No. 1842) Material: Brass, stainless steel

Finishes: US3, US4, US10, US10BE, US26, US26D, US32D

Fastener: No. 2842: 20 ea. #8 x 3/4" FH combo screws, 2 ea. #6 - 8 plastic anchors No. 2840: 10 ea. #8 x 3/4" FH combo screws. NOTE: No plastic anchor required for top only

Features: • For Fire Rated Metal Doors labeled A, B, C, D & E up to 4'w x 8'h

• Non-handed

• Fully automatic– opening active door retracts top and bottom bolts

• Override feature prevents damage to doors or bolts if bolt heads are blocked from entering strikes

• Bolt head rods are adjustable up to 11/2"

• Thermal lock automatically locks the inactive door under high heat conditions due to fire

Options: No. 2842 can be used with the No. 570 Dust Proof Strike (shown on page E4).

No. Size Weight ANSI A156.3

2840 1" x 63/4" 1.2 lbs. Type 25

2842 1" x 63/4" 2.4 lbs. Type 25

Combination Flush Bolts No. 2805 (Self Latching Top Bolt Only) No. 2845 (Set) (replaces No. 1805 and No. 1845) Material: Brass, stainless steel

Finishes: US3, US4, US10, US10BE, US26, US26D, US32D

Fastener: Top: 8 ea. #8 x 3/4" FH combo screws. NOTE: No plastic anchor required for top only.

Bottom (No. 2845 only) 18 ea. #8 x 3/4" FH combo screws, 2 ea. #6 - 8 plastic anchors.

Features: • For Fire Rated Metal Doors labeled A, B, C, D & E up to 4'w x 8'h Top Bolt

• Automatically engages when the inactive door closes. When the active door is opened, the inactive door stays latched at the top until the top bolt is released by pressing the plunger button on the bolt face

Bottom Bolt (No. 2845 only)

• Non-handed

• Fully automatic — opening active door retracts bottom bolt

• Override feature prevents damage to door or bolt if bolt head is blocked from entering strike

• Bolt head rod is adjustable up to 11/2"

• Thermal lock automatically locks the inactive door under high heat conditions due to fire

Options: No. 2845 can be used with the No. 570 Dust Proof Strike (shown on page E4)

No. Size Weight ANSI A156.3

2805 1" x 63/4" 1.2 lbs. Type 27

2845 1" x 63/4" 2.4 lbs. Type 27

E4

Check the web site for the up-to-date catalog

Copyright © 2012-2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

Ro ck w oo d Fl us h

Bo lt s, S tr ik es a nd C oo rd in at or s

No. Size Projection Weight ANSI A156.3

576 1" x 57/16" 7" 2.2 lbs. Type 21

Gravity Door Coordinator No. 576 Material: Cast brass

Finishes: Available in standard architectural finishes (see page 9).

Fastener: Body: 2 ea. #10 x 1" FH SMS, 2 ea. #10 - 24 x 1" FH MS Strike: 5 ea. #8 x 1" FH SMS

Other: • For use on door sizes:

- with Astragal on active door – 18" to 48"

- with Astragal on inactive door – 18" to 34"

- with Astragal on both doors – 18" to 30"

• The overlap of the astragal is maximum 7/8" with door hung on standard hinges. Customer must contact the factory for all other astragal situations

Features: Non-handed reversible. Prevents the active door from closing until the inactive door is closed

No. Size Weight ANSI A156.16

570 Face plate: 13/8" x 27/8" Barrel: 7/8" dia. x 2" depth

0.4 lbs. L04021

Dust Proof Strike No. 570 Material: Brass

Finishes: Available in standard architectural finishes (see page 9)

Fastener: Adjustment nut Spanner wrench 2 ea. #8 x 1 OH SMS, 2 ea. plastic anchors 2 ea. #8 - 32 x 3/4" OH MS, 2 ea. lead anchors

Features: • Works with all Rockwood manual and automatic flush bolts

• Removable face plate for use with thresholds

• Adjustable height for carpeted areas

No. Size Weight

557 x 19BFB Top bolt: 1" x 63/4" Bottom bolt: 13/16" dia.

0.9 lbs.

Lever Extension Flush Bolt With Bottom Fire Bolt No. 557 x 19BFB Material: Flush bolt – brass

Bottom fire bolt – stainless steel

Finishes: Available in standard architectural finishes (see page 9)

Fastener: 7 ea. #8 x 3/4" FH combo screws 4 ea. #8 - 32 x 1/2" FH MS 4 ea. #8 counter sunk washer

Features: • For Fire Rated Plastic & Wood Covered Fire Doors measuring up to 4'w x 9'h rated up to 20 minutes

• 3/4" bolt throw, 3/4" backset; door strength maintained by corner reinforcing plate

• When door is subjected to 230˚F the plug and black plastic cover will melt allowing the bolt to project, locking the leaves together

• Bottom fire bolt eliminates need for floor prep

• Oversize fire bolt strike hole allows for slight door misalignment

D8

Check the web site for the up-to-date catalog

Copyright © 2012-2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

Ro ck w oo d D oo r S to ps

No. Fastener Base Projection Weight ANSI A156.16

461 4 ea. #8 x 3/4" OH SMS 21/4" x 11/4" 35/8" 5.1 lbs./10 L01382

No. Fastener Base Projection Weight ANSI A156.16

461L 4 ea. #8 x 3/4" OH SMS 21/4" x 11/4" 5" 5.7 lbs./10 L01382

Kick Down Door Stop No. 461 Material: Solid cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9) DuraFlex bumper available in gray or black

Features: • Uses replacement bumper No. 461B

• DuraFlex bumper provides reliable grip on floor

• A unique assembly design that conceals the axle in the base

Kick Down Door Stop No. 461L Material: Solid cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9).

DuraFlex bumper available in gray or black

Features: • Uses replacement bumper No. 461B

• DuraFlex bumper provides reliable grip on floor

• A unique assembly design that conceals the axle in the base

• For use with doors up to 3" door-to-floor clearance

D1

Check the web site for the up-to-date catalog

Copyright © 2012-2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

Ro ck w oo d

S er ie s S ta in le ss S te el

S ec ur it y H in ge s

Ro ck w oo d W al l S to ps

No. Bumper Fastener Size Projection Weight ANSI A156.16

400 Convex #6 x 11/2" FH SMS, plastic toggle 27/16" dia. 1" 2 lbs./10 L02101

401 Convex #8 x 1" RH WS, plastic anchor 27/16" dia. 1" 2 lbs./10 L02101

402 Convex #8 - 32 x 1" TH MS, lead anchor 27/16" dia. 1" 2 lbs./10 L02101

No. Bumper Fastener Size Projection Weight ANSI A156.16

403 Concave #6 - 11/2" FH SMS, plastic toggle 27/16" dia. 1" 2 lbs./10 L02251

404 Concave #8 x 1" RH WS, plastic anchor 27/16" dia. 1" 2 lbs./10 L02251

405 Concave #8 - 32 x 1" TH MS, lead anchor 27/16" dia. 1" 2 lbs./10 L02251

Solid Cast Wall Stops No. 400, 401, 402 Material: Cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: Concealed mounting, convex bumper.

Solid Cast Wall Stops No. 403, 404, 405 Material: Cast brass with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: Concealed mounting, concave bumper.

Wrought Wall Stops No. 406 Material: Wrought brass, bronze, and stainless steel with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: • Concealed mounting, convex bumper. Back plate prevents damage to wall

• Accepted by the New York State Office of Mental Health (OMH) for use in high risk areas

Wrought Wall Stops No. 409 Material: Wrought brass, bronze, and stainless steel with DuraFlex bumper

Finishes: Available in standard architectural finishes (see page 9)

Features: • Concealed mounting, concave bumper. Back plate prevents damage to wall

• Accepted by the New York State Office of Mental Health (OMH) for use in high risk area

Options: DuraFlex bumper available in standard gray or optional black

No. Bumper Fastener Size Projection Weight ANSI A156.16

406 Convex #8 x 11/4" TH SMS, plastic toggle 21/2" dia. 1" 11/4 lbs./10 L02101

No. Bumper Fastener Size Projection Weight ANSI A156.16

409 Concave #8 x 11/4" TH SMS, plastic toggle 21/2" dia. 1" 11/4 lbs./10 L02251

E10

Check the web site for the up-to-date catalog

Copyright © 2012-2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

Ro ck w oo d D oo r G ua rd s & S ile nc er s

Door Silencers No. 608-RKW, 609 Material: DuraFlex gray rubber

Other: Sold in packages of 100

No. Size Frame Type Weight ANSI A156.16

608-RKW 1/2" dia. x5/8" Metal 1.3 lbs./500 L03011

609 3/8" x 3/4" Wood 1.3 lbs./500 L03021

Door Silencer No. 608CA Material: Clear rubber

Other: Sold in packages of 300

Features: Self-adhesive mounting

No. Fastener Size Weight

608CA 3/8" dia. x 1/8" Metal or wood 0.2 lbs./300

Wall Guard No. 606-RKW Material: Clear rubber

Other: Sold in sheets of 55

Features: Self-adhesive mounting

No. Fastener Size Weight

606-RKW Self-adhesive back 1" x 1" 0.4 lbs./55

Privacy Door Latch No. PDL (formerly 607) Material: Zinc die cast

Finishes: BRS, DBRS, STNN, CRM, DCRM, ORB

Features: • ADA compliant

• Enhanced in room privacy

• Easy to install

• For use with UL Classified fire doors for use with hollow metal steel composite type fire doors rated up to and including 3 hrs Wood composite type fire doors rated up to and including 11/2 hrs and 20 minutes without hose stream

No. Fastener Size Weight

PDL #12 x 11/4" FH SMS 11/2 " x 23/16" 0.75 lbs.