21-0036 FFE Binder.pdf

interior design within

P1594 Building RR1 Repair By Replacement

Marine Corps Base, Camp Lejeune, NC Furniture Fixtures & Equipment Package Final Submittal April 2023

P1594 Building RR1 Repair By Replacement MCB Camp Lejeune, NC Furniture Fixtures & Equipment Package interior design within

Table of Contents

1. Point of Contact List

2. Narrative of Interior Design Objectives

3. FF&E Cost Summary

4. Basis of Design Spreadsheet

5. Performance Criteria

6. Procurement Sheets

7. Furniture Drawings

Furniture Fixtures & Equipment Package interior design within

Point of Contact List Executive Officer Brian K. Pensak United States Marine Corps Weapons Training Battalion Marine Corps Base, Camp Lejeune

(910) 440-2703 brian.pensak@usmc.mil

Operations Branch Allen D. Cook United States Marine Corps Supply Management Division Marine Corps Base, Camp Lejeune

(910) 451-7636 allen.cook@usmc.mil

Architectural Supervisor, Design Branch Kelly E. Root, RA, NCARB United States Marine Corps Public Works Division Marine Corps Base, Camp Lejeune

(910) 238-6476 kelly.root@usmc.mil

A&E Project Manager Raymond Layton MBF Architects 317-C Pollock Street New Bearn, NC 28560

(252) 637-6373 layton@mbfarchitects.com

A&E Interior Designer Jamie Kissel, NCIDQ Within Interior Design 1008 Granby Street Norfolk, VA 23510

(757) 224-0489 jkissel@withindesigns.com

A&E Junior Designer Alexis Greene Within Interior Design 1008 Granby Street Norfolk, VA 23510

(757) 224-0489 agreene@withindesigns.com

Furniture Fixtures & Equipment Package interior design within

FF&E Narrative

This Basis of Design Narrative outlines the proposed Furniture Fixtures & Equipment requirements for P1594 Building RR1 Repair by Replacement at United States Marine Corps Base, Camp Lejeune. Furnishings for this facility will include dorm & quarters Furnishings, office furniture, file cabinets, task seating, general equipment, and various ancilary items specific to daily operations.

Squad Bays, private offices, open office areas, and administrative spaces will require high-performance commercial grade furnishings that meet or exceed all ANSI, BIFMA, Greenguard requirements. The style will be timeless, and appropriate to the designated function, and will be visually appealing and low maintenance. Furniture items will be selected to give end users the flexibility to move pieces around if needed in the future. Similar finishes in all the spaces will provide a cohesive environment.

Office spaces will have L-shaped desks in the admin areas and height adjustable U-shaped desks at private offices with high-pressure laminate work surfaces and powder coated steel storage components. Squad bays will have metal bunk beds with individual wardrobe storage in a powder coated finish. Fabrics chosen for upholstered items will be medium to dark in color with pattern to hide soiling.

Furniture items with a Green Guard Certification will be chosen where possible which will contribute to a higher level of indoor air quality by lessening the amount of VOC’s (volatile organic compounds) in the air. Products with a long life span will reduce the need for replacement of parts and materials.

INTERIOR DESIGN CRITERIA

Interior Design work will comply with the latest edition of the following criteria & specifications:

FC 1-300-09N NAVY & MARINE CORPS DESIGN PROCEDURES

FC 4-721-10N NAVY & MARINE CORPS UNACCOMPANIED HOUSING

UFGS 01 30 01.00 20 DESIGN PROCUREMENT & INSTALLATION OF FF&E

Furniture Fixtures & Equipment Package interior design

FF&E Cost Summary

PROJECT:

LOCATION: DATE: 4/20/2023

CODE QTY ITEM DESCRIPTION UNIT COST TOTAL

A1 16 DESK WASTEBASKET $30.00 $480.00

A2 14 WALL CLOCK $260.00 $3,640.00

A5 32 SHOWER CURTAIN $50.00 $1,600.00

B1 120 BUNK BED $2,098.00 $251,760.00

B2 240 TWIN MATTRESS XL $200.00 $48,000.00

B3 240 TWIN BEDDING XL $250.00 $60,000.00

C1 6 TASK CHAIR $750.00 $4,500.00

C3 28 WAITING CHAIR $450.00 $12,600.00

D1 2 U-SHAPED DESK $3,300.00 $6,600.00

D2 4 L-SHAPED DESK $2,900.00 $11,600.00

E1 10 TOP LOAD WASHER $1,590.00 $15,900.00

E2 10 FRONT LOAD DRYER $1,075.00 $10,750.00

S1 4 4 HIGH FILE CABINET $715.00 $2,860.00

S2 2 BOOKSHELF $825.00 $1,650.00

S3 240 WARDROBE $710.00 $170,400.00

S4 12 STORAGE SHELF $255.00 $3,060.00

$605,400.00

0.06 $36,324.00

0.05 $30,270.00

0.05 $30,270.00

0.13 $78,702.00

$780,966.00

0.05 $39,048.30

$820,014.30

$820,014.30

0.065 $53,301.00

$873,315.30

Handling and Adminstrative Rate (HAR) (NTE 5%)

SIN & CATEGORY NAME: 33721P PACKAGED OFFICE FURNITURE

FF&E Product Total

Shipping/Freight

Installation

Project Mgmt

FF&E Total

Design Mgmt

NAVAL FACILITIES ENGINEERING COMMAND

FURNITURE, FIXTURES & EQUIPMENT (FF&E) FINAL COST SUMMARY

P1594 Building RR1 Repair By Replacement U.S. Marine Corps Base, Camp Lejeune, NC

GSA CONTRACT #:

NOTE: Adjust all formulas to reflect vendor/project Fees, State Sales Tax, HAR, Bond and SIOH/Project Oversight Rates.

TOTAL FF&E + HAR

Bonding (If required by NAVFAC)

FF&E Planned Modification CLIN Award Amount

SIOH/Project Oversight

TOTAL with SIOH/Project Oversight if applicable

Furniture Fixtures & Equipment Package interior design

Basis of Design Spreadsheet

VENDOR PRICING

Product Total Freight/Delivery if not FOB destination (% of product total) Installation (% of product total)

Dealer: Additional fees (if applicable) GSA #: Design Fee (% of product total) Date: 4/20/2023 Project Mgmt Fee (% of product total)

Total Storage fee

Total with Storage

ITEM QTY BASIS OF DESIGN IMAGE MFG/MODEL ITEM PRICE EXTENDED

PRICE

REQUEST FOR QUOTATION

PLEASE NOTE: Technical Performance Criteria takes precedence over the basis of design examples provided on this spreadsheet.

Bids must include all BLUE cells to be filled out. See all tabs at bottom. This spreadsheet must be submitted as a single "live" excel document. No other types of documents will be accepted.

Nominal Dimensions:

- Overall Width: 74"

- Overall Depth: N/A

- Overall Height: 71"

Reference Performance Criteria Enclosure V for complete list of specification requirements.

PART 1: Vendor Pricing

A5

SHOWER CURTAIN

(price for 30 day increment in case of unforeseen construction delays)

PROPOSED DESIGN IMAGE

P1594 Building RR1 Rpair By Replacement U.S. Marine Corps Base, Camp Lejeune, NC

Project Name:

Location:

BRIEF DESCRIPTION

A2

WALL CLOCK

A1

DESK WASTEBASKET

Nominal Dimensions:

- Overall Width: 15"

- Overall Depth: 10"

- Overall Height: 15"

Reference Performance Criteria Enclosure V for complete list of specification requirements.

Nominal Dimensions:

- Overall Width: 12"

- Overall Depth: 1"

- Overall Height: 12"

Reference Performance Criteria Enclosure V for complete list of specification requirements.

Request for Quotation Part I: Vendor Pricing

Within Interior Design

757.224.0489 Page 1 of 5

ITEM QTY BASIS OF DESIGN IMAGE MFG/MODEL ITEM PRICE EXTENDED

PRICE

PROPOSED DESIGN IMAGEBRIEF DESCRIPTION

240B2

TWIN MATTRESS XL

B1

BUNK BED

Nominal Dimensions:

- Overall Width: 41"

- Overall Depth: 87"

- Overall Height: 34-69"

Reference Performance Criteria Enclosure III for complete list of specification requirements.

Nominal Dimensions:

- Overall Width: 36"

- Overall Depth: 80"

- Overall Height: 7"

Reference Performance Criteria Enclosure III for complete list of specification requirements.

TASK CHAIR

C1 6

B3

Nominal Dimensions:

- Overall Width: 29"

- Overall Depth: 29"

- Overall Height: 38-43"

Reference Performance Criteria Enclosure I for complete list of specification requirements.

TWIN BEDDING XL

Nominal Dimensions:

- Overall Width: 62"

- Overall Depth: N/A

- Overall Height: 110"

Reference Performance Criteria Enclosure III for complete list of specification requirements.

Request for Quotation Part I: Vendor Pricing

757.224.0489 Page 2 of 5

PROPOSED DESIGN IMAGEBRIEF DESCRIPTION

D2

L-SHAPED DESK

U-SHAPED DESK

Nominal Dimensions:

- Overall Width: 72"

- Overall Depth: 78"

- Overall Height: 72"

- See C1/I-701 for details

Reference Performance Criteria Enclosure II for complete list of specification requirements.

Nominal Dimensions:

- Overall Width: 72"

- Overall Depth: 96"

- Overall Height: 72"

- See A1/I-701 for details

Reference Performance Criteria Enclosure II for complete list of specification requirements.

D1

TOP LOAD WASHER

C3

WAITING CHAIR

Nominal Dimensions:

- Overall Width: 27"

- Overall Depth: 28"

- Overall Height: 43"

Reference Performance Criteria Enclosure IV for complete list of specification requirements.

Nominal Dimensions:

- Overall Width: 22 1/4"

- Overall Depth: 21 1/2"

- Overall Height: 33 1/8"

Reference Performance Criteria Enclosure I for complete list of specification requirements.

E1

Request for Quotation Part I: Vendor Pricing

757.224.0489 Page 3 of 5

PROPOSED DESIGN IMAGEBRIEF DESCRIPTION

BOOKSHELF

Nominal Dimensions:

- Overall Width: 18"

- Overall Depth: 24"

- Overall Height: 72"

Reference Performance Criteria Enclosure III for complete list of specification requirements.

Nominal Dimensions:

- Overall Width: 30"

- Overall Depth: 14 1/4"

- Overall Height: 71 1/2"

Reference Performance Criteria Enclosure II for complete list of specification requirements.

S3

WARDROBE

S2 2

Nominal Dimensions:

- Overall Width: 30"

- Overall Depth: 19"

- Overall Height: 52"

Reference Performance Criteria Enclosure II for complete list of specification requirements.

FRONT LOAD DRYER

Nominal Dimensions:

- Overall Width: 27"

- Overall Depth: 28"

- Overall Height: 43"

Reference Performance Criteria Enclosure IV for complete list of specification requirements.

S1

4 HIGH FILE CABINET

E2

Request for Quotation Part I: Vendor Pricing

757.224.0489 Page 4 of 5

PROPOSED DESIGN IMAGEBRIEF DESCRIPTION

S4

STORAGE SHELF

Nominal Dimensions:

- Overall Width: 36"

- Overall Depth: 18"

- Overall Height: 60"

Reference Performance Criteria Enclosure III for complete list of specification requirements.

Request for Quotation Part I: Vendor Pricing

757.224.0489 Page 5 of 5

Furniture Fixtures & Equipment Package interior design

Performance Criteria

1 | P a g e

1008 Granby Street | Norfolk, VA 23510 | 757.224.0489

P1594 BUILDING RR1 REPAIR BY REPLACEMENT

BVD ANALYSIS: PERFORMANCE CRITERIA

TABLE OF CONTENTS

ENCLOSURE I – SEATING

A. C1 – TASK CHAIR

B. C3 – WAITING CHAIR

ENCLOSURE II – CASEGOODS

A. D1 – U-SHAPED DESK

B. D2 – L-SHAPED DESK

C. S1 – 4 HIGH FILE CABINET

D. S2 – BOOKSHELF

E. S3 – WARDROBE

F. S4 – STORAGE SHELF

ENCLOSURE III – DORM QUARTERS FURNITURE

A. B1 – BUNK BED

B. S3 – WARDROBE

C. B2 – TWIN MATTRESS XL

D. B3 – TWIN BEDDING XL

ENCLOSURE IV – EQUIPMENT

A. E1 – TOP LOAD WASHER

B. E2 – FRONT LOAD DRYER

ENCLOSURE V – ANCILLARY ITEMS

A. A1 – DESK WASTEBASKET

B. A2 – WALL CLOCK

C. A5 – SHOWER CURTAIN

2 | P a g e

PERFORMANCE CRITERIA ENCLOSURE I

SEATING

These specifications establish the minimum technical requirements for the acquisition and installation of the complete and usable items as specified below. These requirements are based on general industry standards and are intended to provide high quality seating with broad applicability for computer work, general office work, conferencing, waiting, and casual or formal meetings. All components and hardware must be provided by a single dealer/manufacturer and must be a standard commercial product as shown in the vendors current GSA price list. All proposed products must be compliant with the Buy American Act or Trade Agreement Act.

ERGONOMIC TASK CHAIR (ITEM C1)

GENERAL FEATURES

1. Multi adjustable arms

2. Mesh/plastic back, upholstered or mesh seat

3. Pneumatic height adjustment

4. Adjustable lumbar

5. Separate seat and back

6. Synchronized Tilt or 3-point pivot mechanism

7. Greenguard, SCS, or BIFMA FES certified

8. Minimum 10 year warranty on parts (labor warranty per GSA Schedule)

9. Products on GSA Schedule

TECHNICAL REQUIREMENTS

1. The chair must be a high-performance, long-term ergonomic chair that meets or exceeds all

ANSI/BIFMA Standards.

2. The chair must have a fixed or ratchet-style adjustable back.

3. At workstations, chair must be offered with a 4D adjustable arm. Adjustable arms must be molded urethane with resilient surfaces that protect the arms and work surfaces.

4. The chair must have a 5-star molded engineered glass filled nylon base with hard floor and carpet caster options.

5. The chair must have a standard pneumatic height adjustment and swivel tilt control with tilt tension, swivel, and tilt tension lock.

6. The chair must have an available option for synchronized control featuring tilt control with side mounted tilt tension and multi-position tilt lock for maximum comfort.

7. Chair must sustain weight of 300 lbs.

GENERAL OVERALL SIZE REQUIREMENTS

1. Depth: 26” minimum

2. Width: 27” minimum

3. Seat Width: 17.7” minimum

ADJUSTABILITY RANGES

1. Seat Height Range: 4” minimum seat height range

2. Overall Height Range: 38”-45”

3. Arm Height: 3.5” minimum

4. Arm Length: 8” minimum

5. Seat Depth: 2” minimum

3 | P a g e

CHAIR MECHANISM

1. The task chair mechanism is to be a synchronized – tilt, 3-point pivot, or a balanced tilt style passive ergonomic type with a tension control that is easily reached by the user in a seated position.

2. Sliding seat pan or chair available in small, medium and large sizes.

PNEUMATIC SEAT HEIGHT ADJUSTMENT

1. The chair is to have a pneumatic seat height adjustment that allows a minimum of 4” for travel between 16” to 20” above finished floor.

2. An optional 7” height adjustment for travel between 15” to 22” in product offering is preferred.

SEAT DEPTH ADJUSTMENT

1. A seat depth adjustment is required with a minimum range of 2”. A waterfall edge is required.

ADJUSTABLE LUMBAR SUPPORT

1. A manually adjustable lumbar is required with a minimum of 3.75” of vertical adjustment and can be reached easily from a seated position.

2. Additional offerings with independent support controls on each side of the lumbar control along with a passive pelvic support at the lower part of the mechanism is preferred.

ADJUSTABLE ARMS

1. The adjustable arms are required to be a 4-way design, which allows adjustments in/out, pivot/rotating arm caps, forward/backward, and up/down.

2. Height Adjustment: 3.5” minimum

3. Side to Side: 2” minimum

4. Front to Back: 1.5” minimum required for single size chairs. Front to back adjustment not required for multi-size chairs.

5. Rotating Arm Cap Range: minimum 10 degrees in both directions.

FINISHES

1. Task chair must be multi-use mesh back style with upholstered seat, plastic seat back, frame and arms.

2. Upholstery must be Grade 2 COM.

3. 5-star plastic base.

SUSTAINABILITY AND WARRANTY

1. The task chair must be Greenguard or SCS certified. Cradle to Cradle, SMaRT, or BIFMA Level

3 certified

2. Low VOC adhesives and or material.

3. Minimum 10-year warranty on parts (inclusive of mesh and plastic)

4. Minimum 5-year warranty on manufacturers’ standard fabrics.

BOD TECHNICAL SPECIFICATIONS

• C1 – Task Chair Features:

Approximately 29”W x 29”D x 38-43”H Dual posture option 4D arms Bleach cleanable mesh back 400lb weight capacity

4 | P a g e

SIDE SEATING (ITEM C3)

TECHNICAL REQUIREMENTS

1. The chair must have two-piece construction.

2. The back must be able to flex by a torsion mechanism which can flex up to 14 degrees.

3. The frame must be made up of heavy gauge steel tube legs welded to a shell mechanism.

4. Frame must be finished in electrostatically applied powder coat paint.

5. Seat must be cushioned and upholstered and field replaceable.

6. Chair must sustain weight as indicated under BOD Technical Specifications listed below.

GENERAL OVERALL SIZE REQUIREMENTS

1. Depth: 22.75” minimum

2. Width: 23” minimum

3. Seat Width: 19” minimum

4. Height: 34.5” minimum

SUSTAINABILITY AND WARRANTY

1. Chair must be Greenguard or SCS certified.

2. Minimum 10-year warranty on parts (inclusive of mesh and plastic)

3. Minimum 5-year warranty on manufacturers’ standard fabrics.

BOD TECHNICAL SPECIFICATIONS

• C3 – Waiting Chair Features:

Approximately 22-1/4”W x 21-1/2”D x 33-1/8”H Sled base Upholstered seat Perforated poly back Armless

5 | P a g e

PERFORMANCE CRITERIA ENCLOSURE II

CASEGOODS

This specification establishes the minimum requirements for the acquisition and installation of the complete and usable suite of furniture composed of laminate and metal, supporting components, electrical hardware, communication and data cable routing, locking features, special electrical features and accessories.

Requirements and configurations must be in accordance with furniture layout and typical types shown in drawings and specified herein. If dimension variations are not mentioned after the called-out dimensions within this specification, nominal dimensions are acceptable. Components and hardware must be provided by a single manufacturer and must be standard commercial products as shown in the vendor’s current GSA pricelist. Vendor must submit a single product solution for the casegoods. All products must be branded from the same manufacturer with the exception of the articulating keyboard tray, monitor arm, CPU holder, work tools, adjustable height legs and task lighting. All proposed products must be compliant with the Buy American Act or Trade Agreement Act.

DESKS (ITEM D1 & D2)

TECHNICAL REQUIREMENTS

1. All casegood items must come from one manufacturer.

2. All products must carry a lifetime warranty. Limitations or exclusions involving materials and components such as lamps, ballasts, and upholstery are acceptable.

3. Metallic or mid-Grade level of painted finishes for pricing purposes.

4. Laminate to be priced using the highest grade.

5. Greenguard, SCS, MAS Green or BIFMA FES Certified.

6. Manufacturer must have a coordinating systems furniture product that can coordinate with the desking system.

7. Non-handed.

STYLE

1. Furniture and hardware should have contemporary, transitional, and traditional design options.

2. Design must have features including a mix of laminate & metal components

CONSTRUCTION

1. Exterior must have high-pressure plastic laminate finishes (no thermofoil allowed) or powder coated metal with an epoxy finish.

WORKSURFACES

1. Main work surface to be rectangular.

2. Work surface to be laminate to match the adjacent casegood components.

3. Primary work surface to be height adjustable with ½ height modesty panel.

WIRE MANAGEMENT

1. One (1) grommet to be specified on all pieces including desks and returns.

2. Provide troughs for wire management with data and power modules as indicated on plan.

ERGONOMIC ACCESSORIES

1. Provide one (1) desk mounted dual monitor arm with vertical & horizontal arms at each station.

6 | P a g e

SUSTAINABILITY AND WARRANTY

1. Greenguard, SCS, or BIFMA FES certified

2. All products must carry a lifetime warranty. Limitations or exclusions involving materials and components such as lamps, ballasts, and upholstery are acceptable.

BOD TECHNICAL SPECIFICATIONS

• D1 – U-Shaped Desk Features:

Approximately 72”W x 96”D x 66”H Overall 72”W x 30”D HPL adjustable height main work surface 42”W x 18”D HPL bridge return 72”W x 24”D Rear credenza 13”H HPL Modesty panel mounted to main work surface

(1) 18”W Box/Box/File Pedestal

(1) 18”W Mobile Box/Box/File Pedestal

(1) Grommet with wire management on each worksurface

(1) Desk mounted task light

(1) Desk mounted dual monitor arm See A1/I-701 for further details

• D2 – L-Shaped Desk Features:

Approximately 78”W x 72”D x 66”H Overall 78”W x 30”D HPL static height main work surface 48”W x 24”D HPL return 72”W x 15”D Overhead storage hutch w/ tackboard & task light

(1) 18”W Box/Box/File Pedestal

(1) 18”W Mobile Box/Box/File Pedestal

(1) Grommet with wire management on each worksurface

(1) Desk mounted dual monitor arm See C1/I-701 for further details

STORAGE (ITEMS S1 & S2)

TECHNICAL REQUIREMENTS

1. All products must come from one manufacturer or multiple manufacturers with matching finishes.

2. Laminate to be priced using the highest grade.

3. Manufacturer must have a coordinating systems furniture product that can coordinate with the desking system.

STYLE

1. Furniture and hardware should have contemporary, transitional, and traditional design options.

2. Design must have features including a mix of laminate & metal components.

CONSTRUCTION

1. Storage units must have a fully finished back to allow for use away from the wall.

2. Exterior must have high-pressure plastic laminate finishes (no thermofoil allowed) or powder coated metal with an epoxy finish.

7 | P a g e

3. Freestanding storage to be finished on all sides and be available in various heights to match each other.

4. Multiple drawer options to be available (metal, laminate, frosted glass, etc.)

5. Vertical storage to be constructed of High-Pressure Laminate and must be properly supported, counterbalanced, and secured to wall.

6. All freestanding storage to include 1 ½” levelers with a minimum of 1” adjustment.

7. All storage with doors and drawers to be lockable and keyed alike to a master key.

8. All doors and drawers must have a minimum of 4 standard pull options.

SUSTAINABILITY AND WARRANTY

1. Greenguard, SCS, or BIFMA FES certified

2. All products must carry a lifetime warranty. Limitations or exclusions involving materials and components such as lamps, ballasts, and upholstery are acceptable.

BOD TECHNICAL SPECIFICATIONS

• S1 – 4 High File Cabinet Features:

Approximately 30”W x 19”D x 52”H

(4) Drawers with side to side hanging bars & Heavy duty steel full-extension slides Flush front with integral pulls Finished back, sides & top Safety interlock to prevent tipping with counterweight included Adjustable leveling glides HPL finish

• S2 – Bookshelf Features:

Approximately 30”W x 14-1/4”D x 71-1/2”H

(4) Adjustable shelves Finished back, top, sides & interior Adjustable leveling glides HPL finish

INDUSTRIAL STORAGE (ITEM S4)

TECHNICAL REQUIREMENTS

1. Vertical shelving to be constructed of steel with plywood shelf surface and must be properly supported, counterbalanced, and secured to wall.

2. Shelving unit to include 1 ½” levelers with a minimum of 1” adjustment.

BOD TECHNICAL SPECIFICATIONS

• S4 – Storage Shelf Features:

Approximately 36”W x 18”D x 60”H Durable steel construction 5/8” Wood deck shelving 1500 lb weight capacity 14 auge steel uprights

8 | P a g e

PERFORMANCE CRITERIA ENCLOSURE III

DORM QUARTERS FURNITURE

This specification establishes the minimum requirements for the acquisition and installation of the complete and usable suite of metal dorm furniture composed of metal panels with wood trim, supporting components, heavy duty hardware, locking features, special electrical features and accessories.

Requirements and configurations must be in accordance with furniture layout and typical types shown in drawings and specified herein. If dimension variations are not mentioned after the called-out dimensions within this specification, nominal dimensions are acceptable. Components and hardware must be provided by a single manufacturer and must be standard commercial products as shown in the vendor’s current GSA pricelist. All proposed products must be compliant with the Buy American Act or Trade Agreement Act.

METAL FURNITURE (ITEMS B1 & S3)

GENERAL REQUIREMENTS

1. Design/Aesthetics: The design shall be age appropriate for men and women within the range of 18-28 years of age.

2. Manufacturer Requirements: Dorm and Quarters manufacturers must be able to manufacturer all coordinating products listed in this document. Offeror/Dealer must have in-house services including sales and installation. Offeror/Dealer must have warehousing capability.

3. Mockups: Room mockups may be require. Evaluation of the mockup will be conducted by the NAVFAC Interior Design POC, Base Property and End User, if desired. Mockups may be required to remain on site until project installations are complete.

4. All products must carry a 25 year warranty.

5. Finish samples shall be required for final approval prior to production of any orders.

CONSTRUCTION AND MATERIALS

1. All steel shall be cold rolled, oil treated, dimension stock steel of commercial grade quality conforming to international standards.

2. Low carbon steel shall be ASTM A366 standard with the highest grade carbon quality available.

Weight per sheet in lbs shall be 120 lbs per 60” x 144” size sheet. Thickness should be a min of 1.2-1.5mm thick (18-16 gauge). Where 16 gauge is called for lesser grade shall not be considered equal. All square tubes shall be 16 guage, 1.3mm thickness.

3. Internal construction should allow for easy parts replacement.

4. All welding and rivets shall be smooth to the touch and visually without dimple or indentation.

5. All welding shall be smooth to the touch and visually without dimple or indentation, which could cause visual adversity or affect the structural integrity of the tubing

STYLE

1. Style shall be appropriate for small campus like spaces.

2. All furnishings shall have simple lines and detailing that is durable and easily maintained.

3. All furnishings specified herein shall be of a design, material and workmanship to withstand heavy daily usage over an extended life with a minimum of maintenance and repair.

4. The style shall include a full range of dorm and quarters furniture pieces.

9 | P a g e

UNDERBED DRAWERS

1. Drawers to have recessed padlock hasp.

2. Pullout drawers to have 2 sets of 150 lb minimum, full extension, steel ball bearing drawer glides.

3. Drawer construction and materials, to include drawer bottoms, shall be able to withstand a load of 125% of the rated load of the drawer glides without sagging or failing.

HARDWARE

1. Bearing glides, wherever required, to be high quality steel ball bearing drawer glides with full extension and epoxy or powder coated to match finish requirements.

2. Single locking system in powder coat finish is required on lift top beds w/drawers, wardrobes and desk units. Please provide matching matte black scuff plates behind each hasp lock area where wood finish would be prone to scratching.

3. All shelf supports to be metal powder coated in powder coat, to match color of hardware package.

4. Metal powder coated hooded drawer and door pulls in powder coat is required, with a minimum of four (4) concealed screw attachment points required.

5. All handles to be steel powder coated to match hardware package with mounting hardware of heavy duty quality.

6. Levelers to be nylon based (felt covered to protect flooring), color: black or silver

FINISHES

1. All metal pieces shall have a powder coat finish with an epoxy finish that is a minimum of 1.5 mil thickness and a hardness of 3H.

2. All finishes shall be formaldehyde free and low or no VOC. Acrylated UV curable epoxy and polyester finish or water based acrylic are acceptable finishes – no catalyzed lacquer or other solvent based finishes are allowed.

3. Wood, laminate and metal finish on all furniture pieces shall coordinate where applicable.

Provide scratch resistant finish coats on all furniture pieces.

4. All surface finishes shall be electro-statically applied utilizing electro-static finishing processes.

All six sides on any three dimensional items shall be finished to ensure a full barrier and shall be suitable for construction grade institutional use quality.

METAL BUNKABLE BED UNIT

1. Metal Bed with 2 Lockable Drawers. Bunkable with or without bunking brackets.

2. Ladder Style Bed Ends contain min of 14 sets of pin settings to accommodate height adjustments where warranted from 0 in to 36 in height.

3. Assembly of bed accomplished with a hook or similar assembly (no tools required).

4. Ability to support at min a 38 in W x 80 in L x 9 in H mattress.

5. High Pressure Steel, thickness, 1.2 to 1.5 mm (18 to 16 gauge).

6. Bed’s supporting capacity: min. 550 lbs. (combined weight person/gear).

7. Lockable Drawers shall consist of recessed locking device, Metal Drawer Fronts.

8. 2 Lockable Drawers, minimum dimensions of 24 In W x 24 In L x 6 In H.

9. Double roller-bearing drawer glides.

10. Headboard panel: double-sided high-pressure wood laminate that consists of 50 to 52 lb.

particleboard core with 2 to 3 mm wood grain PVC fused edge banding to match wood laminate panels.

11. Metal, rivets, brackets, and welding points shall be powder-coated and shall be smooth to the touch and visually without dimple or indentation.

10 | P a g e

WARDROBE WITH FULL DOORS

1. 1-Door ventilated wardrobe unit with solid back panel, and side panels with ventilated holes.

2. High Pressure Steel, thickness (18 - 16 gauge), powder-coated metal with epoxy finish.

3. Front: (2) doors with diamond cut pattern ventilated holes, left and right outswing (toward user) with the maximum opening capability of 180 degrees.

4. Interior: (1-2) fixed shelfs and full width clothes rod under-shelf; fixed shelfs shall be flush with back interior wall.

5. (3) Chrome Hooks, (1) inside each door, (1) on back panel.

6. Three-point latching system with padlock hasp.

7. Equipped with (4) adjustable plastic nylon floor glides.

8. Metal, rivets, brackets, and welding points shall be powder-coated and shall be smooth to the touch and visually without dimple or indentation.

9. Shipped Fully Assembled.

SUSTAINABILITY AND WARRANTY

1. Greenguard, MAS Green, or SCS certification is required.

2. Finish coats should use low VOC materials.

3. Painted finishes must comply with Federal Regulation 16CRF 1303 for lead content.

4. All products must carry a 25-year warranty.

5. All finishes shall carry a minimum of a 10-year manufacturer warranty for pealing and chipping.

BOD TECHNICAL SPECIFICATIONS

• B1 – Bunk Bed Features:

Approximately 41”W x 87”D x 34-69”H Metal bunk bed EZ Hook assembly Underbed pull-out drawers with recessed lock Solid mattress decking

• S3 – Wardrobe Features:

Approximately 18”W x 24”D x 72”H Durable steel construction Includes corner gussets for added durability Textured powder-coated finish Perforated mesh doors Box construction and double thickness doors Variety of locking types available

SOFTGOOD COMPONENTS (ITEMS B2 & B3)

TECHNICAL REQUIREMENTS

1. Softgoods must be high-performance, long lasting and able to withstand extensive use.

2. Must fit Twin XL bed frame.

3. Provide two-sided Twin XL mattress with minimum 364 double, heat-tempered steel, Bonnell innerspring coils (minimum of 12.75 gauge Steel), and each coil with minimum one turn per inch.

11 | P a g e

4. Edge support with 6-gauge minimum border wire secured to the outer row of perimeter coils by helicals to protect the edges from premature breakdown.

5. Wire border must be butt-welded at ends (support seating usage).

6. All sides shall be completely enclosed with adequate padding so no sharp edges or coils can be felt through sides.

7. Smooth, dark- colored, outer-cover of breathable, soft, and comfortable polyurethane-coated nylon fabric or similar Polybrominated Diphenyl Ether (PDBE) and Polyvinyl Chloride (PVC) material and shall have inverted seams to resist raveling and zippering if stitches are broken or cut.

8. Mattress shall have a bonded, flame resistant and chemical-free insulation pad or fire retardant fiber (laminated to the outer cover) on top and bottom as a fire barrier.

9. Beneath the fire barrier, a minimum of 1.5 thick High Resilience (HR) polyurethane high density foam with an unfilled density of at least 1.5 pounds per cubic foot and minimum Indentation Load Deflection (ILD) of 30 on both sides of mattres.

10. Product must be fluid proof, hypoallergenic, bug resistant, antimicrobial, antistatic, crack resistant, and flame retardant.

11. Flame retardant chemicals shall not be used to meet FR requirements. Meet CPSC 16 CFR 1632 and 16 CFR 1633.

SUSTAINABILITY AND WARRANTY

1. Manufacturer’s warranty minimum of 10 years

BOD TECHNICAL SPECIFICATIONS

• B2 – Twin Mattress XL Features:

Approximately 36”W x 80”L x 8”D Bacterial/fungal resistant 13-gauge wire inner spring 6-gauge border 7/16” foam on both sides CAL 117 fire resistant

• B3 – Twin Bedding XL Features:

Approximately 62”W x 110”L Double layer contrasting blanket 87% post-consumer recycled polyester & 13% virgin polyester Machine washable Fits Twin XL mattress

12 | P a g e

PERFORMANCE CRITERIA ENCLOSURE IV

EQUIPMENT

This specification establishes the minimum requirements for the acquisition and installation of Equipment. Requirements and configurations must be in accordance with furniture layout shown in drawings and specified herein. If dimension variations are not mentioned after the called-out dimensions within this specification, nominal dimensions are acceptable. Components and hardware must be provided by a single manufacturer and must be standard commercial products as shown in the vendor’s current GSA pricelist. All proposed products must be compliant with the Buy American Act or Trade Agreement Act.

GENERAL EQUIPMENT (ITEMS E1 & E2)

TECHNICAL REQUIREMENTS

2. Equipment must be high-performance, long lasting and able to withstand extensive use.

3. Products must be ETL listed or equal and in compliance with accepted national standards.

4. Parts must be easily replaceable.

5. Must be available through GSA.

SUSTAINABILITY AND WARRANTY

1. All equipment items must be Energy Star Certified.

2. Minimum 7-Year Warranty on all parts

BOD TECHNICAL SPECIFICATIONS

• E1 – Top Load Washer Features:

Approximately 26”W x 28”D x 43”H Top loading with 3.2 Cu. Ft. capacity Various wash/spin speed combos with 16 preset wash cycles

(3) Wash/rinse temperatures Various water levels Energy Star Certified

• E1 – Front Load Dryer Features:

Approximately 27”W x 28”D x 43”H Front load dryer with reversable door hinge Galvanized drying cylinder End-of-cycle signal Durable exterior finish Energy Star Certified

13 | P a g e

PERFORMANCE CRITERIA ENCLOSURE V

ANCILLARY ITEMS

This specification establishes the minimum requirements for the acquisition and installation of Ancillary Items. Requirements and configurations must be in accordance with furniture layout shown in drawings and specified herein. If dimension variations are not mentioned after the called-out dimensions within this specification, nominal dimensions are acceptable. Components must be standard commercial products as shown in the vendor’s current GSA pricelist. All proposed products must be compliant with the Buy American Act or Trade Agreement Act.

ANCILLARY FURNISHINGS (ITEMS A1, A2 & A5)

TECHNICAL REQUIREMENTS

1. Items must be high-performance, long lasting and able to withstand extensive use.

2. Must be available through GSA.

WARRANTY

1. Minimum 3-year Warranty

BOD TECHNICAL SPECIFICATIONS

• A1 – Waste Can Features:

Approximately 15”W x 10”D x 15”H 28 qt. volume Resists chipping and denting Rolled rim adds strength and holds up liners Complies with UL, CSFM

• A2 – Wall Clock Features:

12” Overall Diameter White face with black numerals Glass face cover Aluminum finish bezel Quartz battery movement Batteries included

• A5 – Shower Curtain Features:

Approximately 74”W x 71”L Hookless curtain with grommets Made of 100% polyester Snap-on liner with viewing window above the shoulder 100% waterproof w/ ultrasonic hem Stitch-free allowing water to run off easily reducing mildew

Furniture Fixtures & Equipment Package interior design

Procurement Sheets

DATE:

PROJECT: 4/20/2023

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: A1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY QTY

2 1 130 - OFFICE

1 2 1 1 1 1 1 1 1 1 1 1

ITEM PHOTO/FINISH SAMPLES

ROOM NUMBERROOM NUMBER

Alle

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC WASHINGTON

14-1/2"W x 10-1/2"D x 15-1/4"H Black

$30.00Technical Specifications:

- 28 qt volume.

- Resists chipping and denting

- Rolled rim adds strength & holds up liners

- Complies with UL, CSFM

$480.00

Within Interior Design

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

BASE/CITY/STATE:

DESK WASTEBASKET

MANUFACTURER:

Alle

P1594 Building RR1 Repair By Replacement U.S. Marine Corps Base, Camp Lejeune, NC

Alle P.O. Box 961 Amherst, NY 14226

(716) 446-5538

TBD

104 - OFFICE

109 - SQUAD BAY 203 - OFFICE

112 - SQUAD BAY 207 - SQUAD BAY

129 - OFFICE 224 - SQUAD BAY

125 - SQUAD BAY 209 - SQUAD BAY

127 - SQUAD BAY 216 - SQUAD BAY

128 - WAITING 222 - SQUAD BAY

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: A2

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY QTY

1 1 130 - OFFICE

1 1 1 1 1 1 1 1 1 1 1 1

ITEM PHOTO/FINISH SAMPLES

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

ROOM NUMBER

104 - OFFICE

P1594 Building RR1 Repair By Replacement

Compton, CA 90224

(800) 496-0204

Peter Pepper

TBD

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

17929 So. Susanna Rd PO BOX 576

ROOM NUMBER

11-3/4" Diameter Aluminum

$260.00Technical Specifications:

- Quartz battery movement

- White face with black graphics

- Glass face cover

- Aluminum finish bezel

- Includes batteries

$3,640.00

Within Interior Design

BASE/CITY/STATE:

WALL CLOCK

MANUFACTURER:

Peter Pepper

Peter Pepper

129 - OFFICE

203 - OFFICE

125 - SQUAD BAY

127 - SQUAD BAY

128 - WAITING

209 - SQUAD BAY

216 - SQUAD BAY

222 - SQUAD BAY

207 - SQUAD BAY

109 - SQUAD BAY

224 - SQUAD BAY

112 - SQUAD BAY

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: A5

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

ITEM PHOTO/FINISH SAMPLES

ROOM NUMBER

212 - SHOWER

220 - SHOWER

123 - SHOWER

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

115 - SHOWER

P1594 Building RR1 Repair By Replacement

Lebanon, NJ 08833

(800) 972-7214

Construction Specialties Hookless

TBD

BASE/CITY/STATE:

SHOWER CURTAIN

MANUFACTURER:

Construction Specialties

Construction Specialties 3 Werner Way Suite 100

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

74"W x 71"H Litchield

$50.00Technical Specifications:

- 24 gallon painted steel waste receptacle with adjustable glides

- Step mechanism with solft close lid

- Internal 16 gallon capacity liner with bag ring

- Black label waste icon

$1,600.00

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: B1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY QTY

14 14 11 15 15 8 14 15

ITEM PHOTO/FINISH SAMPLES

Within Interior Design

ROOM NUMBER

125 - SQUAD BAY

127 - SQUAD BAY

207 - SQUAD BAY

209 - SQUAD BAY

216 - SQUAD BAY

222 - SQUAD BAY

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

ROOM NUMBER

109 - SQUAD BAY

P1594 Building RR1 Repair By Replacement

Greenfield, IN 46140

(800) 423-5638

University Loft Co.

G85278 Metal Storage Bed

TBD

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

224 - SQUAD BAY

112 - SQUAD BAY

BASE/CITY/STATE:

BUNK BED

MANUFACTURER:

University Loft Co.

University Loft Co.

2588 Jannetides Blvd.

38 5/32"W x 83 1/2"D x 69"H Jute

$2,098.00Technical Specifications:

- Metal bunk bed with bunking brackets

- EZ Hook assembly

- Underbed drawers

- Ladder style bed ends

- Solid mattress decking

$251,760.00

JUTE

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: B2

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY QTY

28 28 22 30 30 16 28 30

ITEM PHOTO/FINISH SAMPLES

P1594 Building RR1 Repair By Replacement

University Loft Co.

Standard Mattress

TBDUniversity Loft Co.

2588 Jannetides Blvd.

Greenfield, IN 46140

(800) 423-5638

Technical Specifications:

- Bacterial/fungal resistant

- 13 gauge wire inner spring

- 6 gauge boarder

- 7/16" foam on both sides

- CAL 117 fire resistant

$48,000.00

Within Interior Design

ROOM NUMBER

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

127 - SQUAD BAY

109 - SQUAD BAY

BASE/CITY/STATE:

TWIN MATTRESS XL

MANUFACTURER:

University Loft Co.

ROOM NUMBER

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

36"W x 80"D Navy

$200.00

224 - SQUAD BAY

112 - SQUAD BAY

125 - SQUAD BAY

207 - SQUAD BAY

209 - SQUAD BAY

222 - SQUAD BAY

216 - SQUAD BAY

NAVY

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: B3

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY QTY

28 28 22 30 30 16 28 30

ITEM PHOTO/FINISH SAMPLES

Valley Forge Fabrics

Valley Forge Fabrics

BIB-FXL-9FB

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

62"W x 110"D Gun Metal/Tea Chest

$250.00Technical Specifications:

- Double layer contrasting blanket

- 87% post-consumer recycled polyester & 13% virgin polyester

- Machine Washable

- Fits a twin XL mattress

$60,000.00

Within Interior Design

ROOM NUMBER

Fort Lauderdale, FL 33309

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NCBASE/CITY/STATE:

TWIN BEDDING XL

MANUFACTURER:

Valley Forge Fabrics

P1594 Building RR1 Repair By Replacement

TBD

1650 W McNab Rd

(954) 971-1776

ROOM NUMBER

125 - SQUAD BAY

207 - SQUAD BAY

209 - SQUAD BAY

216 - SQUAD BAY

222 - SQUAD BAY

109 - SQUAD BAY

112 - SQUAD BAY

127 - SQUAD BAY

224 - SQUAD BAY

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: C1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

2 104 - OFFICE

1 129 - OFFICE

1 130 - OFFICE

2 203 - OFFICE

ITEM PHOTO/FINISH SAMPLES

Zody II

TBD

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

29"W x 29"D x 38-43"H Upholstery: Wellington, Black Knit Back: Zody Knit, Rosewood Base: Metallic Silver Trim: Fog

$750.00 Technical Specifications:

- Dual posture option

- 4D arms

- Bleach cleanable mesh back

- 400lb weight capacity

- BIFMA Level 3

- 12 year 24/7-365 warranty $4,500.00

Within Interior Design

ROOM NUMBER

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NCBASE/CITY/STATE:

TASK CHAIR

MANUFACTURER:

Haworth

Haworth One Haworth Center

P1594 Building RR1 Repair By Replacement

Holland, MI 49423

(616) 393-3000

Haworth

KNIT UPHOLSTERY BASE TRIM

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: C3

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

2 203 - OFFICE

ITEM PHOTO/FINISH SAMPLES

104 - OFFICE

129 - OFFICE

130 - OFFICE

P1594 Building RR1 Repair By Replacement

$12,600.00

Within Interior Design

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

TBD

ROOM NUMBER

Technical Specifications:

- Upholstered back

- Plastic perforated back

- BIFMA certified

- Sled base

- Armless

- 12 year warranty

National Office Furniture Ditto

22-1/4"W x 21-1/2"D x 33 1/8"H Upholstery: Silica Etch/Slate Plastic: Black

$450.00

128 - WAITING

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NCBASE/CITY/STATE:

WAITING CHAIR

MANUFACTURER:

National Office Furniture

National Office Furniture 1600 Royal Street Jasper, IN 47546

(800) 482-1717

UPHOLSTERY PLASTIC

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: D1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

1 130 - OFFICE

ITEM PHOTO/FINISH SAMPLES

P1594 Building RR1 Repair By Replacement

X-Series

TBDHaworth One Haworth Center Holland, MI 49423

(616) 393-3000

Haworth

72"W x 96"D x 72"H

ROOM NUMBER

129 - OFFICE

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

Tackboard: Chevron Meander Laminate: Neo Walnut Trim: Metallic Silver

$3,300.00Technical Specifications:

- Steel core structure with box-in-box construction

- Storage has full-extension steel ball bearing drawer slides

- High-pressure laminate worksurfaces with steel modesty panels

- Modesty panels include cable management

- See A1/I-701 for further details

$6,600.00

BASE/CITY/STATE:

U-SHAPED DESK

MANUFACTURER:

Haworth

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

Within Interior Design

LAMINATE TRIM

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: D2

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

2 203 - OFFICE

ITEM PHOTO/FINISH SAMPLES

Haworth

Tackboard: Chevron Meander Laminate: Neo Walnut Trim: Metallic Silver

$2,900.00Technical Specifications:

- Steel core structure with box-in-box construction

- Storage has full-extension steel ball bearing drawer slides

- High-pressure laminate worksurfaces with steel modesty panels

- Modesty panels include cable management

- Overhead storage extends over the return and includes LED lighting

- See C1/I-701 for further details $11,600.00

X-Series

One Haworth Center Holland, MI 49423

(616) 393-3000

104 - OFFICE

Within Interior Design

Haworth

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

72"W x 78"D x 72"H

ROOM NUMBER

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NCBASE/CITY/STATE:

L-SHAPED DESK

MANUFACTURER:

Haworth

P1594 Building RR1 Repair By Replacement

TBD

TACKBOARD LAMINATE TRIM

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: E1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

ITEM PHOTO/FINISH SAMPLES

114 - LAUNDRY

211 - LAUNDRY

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

25-5/8"W x 28"D x 43"H White

$1,590.00Technical Specifications:

- Top loading with 3.17 Cu Ft capacity

- Various wash/spin speed comboss.

- Automatic balancing suspension

- Four-Vane Polypropylene Agitator

- Energy Star certified

$15,900.00

Within Interior Design

ROOM NUMBER

PO Box 990 Ripon, WI 54971

(800) 345-5649

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

BASE/CITY/STATE:

TOP LOAD WASHER

MANUFACTURER:

Speed Queen

P1594 Building RR1 Repair By Replacement U.S. Marine Corps Base, Camp Lejeune, NC

Speed Queen

Speed Queen

LWNE22SP115TW01

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: E2

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

ITEM PHOTO/FINISH SAMPLES

P1594 Building RR1 Repair By Replacement

$10,750.00

Within Interior Design

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

ROOM NUMBER

Technical Specifications:

- Front load dryer with reversible door ginge

- Galvanized steel cylinder

- 6 dry cycles

- Moisture sensing technology

- Energy Star certified

Speed Queen

LDEE7RGS173TW01

27"W x 28"D x 43"H White

$1,075.00

114 - LAUNDRY

211 - LAUNDRY

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NCBASE/CITY/STATE:

FRONT LOAD DRYER

MANUFACTURER:

Speed Queen

Speed Queen PO Box 990 Ripon, WI 54971

(800) 345-5649

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: S1

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

ITEM PHOTO/FINISH SAMPLES

P1594 Building RR1 Repair By Replacement

Holland, MI 49423

(616) 393-3000

Haworth X-Series

TBD

Technical Specifications:

- 4H file cabinet

- Each drawer has side to side hanging bars

- Drawer fronts have a laminate finish

- Multiple options for drawer pulls

- Drawers have full-extension ball bearing slides

- Cabinet includes a lock that secures all drawers

- Base includes adjustable glides

BASE/CITY/STATE:

4 HIGH FILE CABINET

MANUFACTURER:

Haworth

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

Within Interior Design

30"W x 18-3/4"D x 51-1/2"H

Haworth One Haworth Center

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

ROOM NUMBER

104 - OFFICE

203 - OFFICE

Laminate: Neo Walnut

$715.00

$2,860.00

LAMINATE

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: S2

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJECT ID CONTACT:

DESCRIPTION: QUANTITY

MFG:

Model #:

Dimensions:

Finishes: UNIT PRICE

EXTENDED PRICE

Disclaimer: Model numbers provided by the dealer as specified on their BOM.

ROOM LOCATIONS:

QTY

ITEM PHOTO/FINISH SAMPLES

P1594 Building RR1 Repair By Replacement

Muscatine IA 52761

(563) 272-4800

Allsteel Approach

TBD

$825.00

$1,650.00

BASE/CITY/STATE:

BOOKSHELF

MANUFACTURER:

Allsteel

ANY VARIANCE OR MODIFICATION OF THIS SPECIFICATION WILL BE COORDINATED THROUGH NAVFAC

Within Interior Design

30"W x 14 1/4"D x 71-1/2"H

Technical Specifications:

- 5H Bookcase

- Includes 4 adjustable shelves

- Shelves accommodate 5 rows of standard height binders

- Interior and exterior laminate finish matches

- Base includes adjustable glides

Allsteel 2210 Second Avenue

NAVAL FACILITIES ENGINEERING COMMAND MIDLANT

U.S. Marine Corps Base, Camp Lejeune, NC

ROOM NUMBER

104 - OFFICE

203 - OFFICE

Laminate: Neo Walnut

LAMINATE

BPA CONTRACT #: TBD

EXPIRATION DATE: TBD ITEM NO:

ITEM: S3

MANUFACTURER ADDRESS: ORDERING ADDRESS:

NAVFAC ID CONTACT: Peggy Noland, NAVFAC LANT

PROJEC…