21DEC2019 Part 6 - ATTACHMENT A1 - 19-0118 Finish Schedule and Architectural Plans.pdf

PDF 2 MB Posted

Attached to
DB MCASNR Facility Repairs, Phase II
Solicitation number
N4008519R8086
Issued by

View the file

Other files

File Type Posted
Amnd 0008 19R8086 FINAL.pdf PDF
19-0118 - Part 3.13JAN20.pdf PDF
Amnd 0007 19R8086 FINAL.pdf PDF
10 14 00.20 MCBLNC SIGNS STANDARDS-GRAPHICS 24apr2019.pdf PDF
19-0118 Part 6 TOC.pdf PDF
AS3905 Structural addition.pdf PDF
AS4108 Crane drawings.pdf PDF
Typical Hangar Sliding Door Drawings AS3905 & AS4108.pdf PDF
19-0118 - Part 3.pdf PDF
AS4108 Structural drawings.pdf PDF
AS4108 original structural drawings.pdf PDF
Amnd 0006 19R8086 FINAL.pdf PDF
Current AS3905 & AS4108 Crane Info.xlsx XLSX spreadsheet
Amnd 0005 19R8086 FINAL.pdf PDF
Amnd_0004_19R8086_FINAL.pdf PDF
Amnd_0003_19R8086_FINAL.pdf PDF
Amnd_0002_19R8086_FINAL.pdf PDF
Waiver.pdf PDF
Master_PPI_Form_Template.xls XLS spreadsheet
Amnd_0001_19R8086_FINAL.pdf PDF
19-0118_-_Part_2.pdf PDF
19-0118_-_Part_4.pdf PDF
N4008519R8086_MCASNR_Rprs_Phase_II.pdf PDF
19-0118_-_Part_5.pdf PDF
19-0118_-_Part_3.pdf PDF
19-0118_-_Part_2A.pdf PDF
Show all 26

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1o

C

ENTRY

M

JC

K

COMM

A

STRGE

N

W HEAD

N

M HEAD

B

OFFICE

A

STORAGE

A

WAREHOUSE

B

OFFICE

A

CAGE

A

CAGE

A

CAGE

A

CAGE

108A t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS424 - DEMO

A101

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS424 - RENO

A101

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS424

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

OUTSIDE STAIR & RAILING

AutoCAD SHX Text

DEMO RAILING

AutoCAD SHX Text PATCH EXISTING CONCRETE STAIR, NOSING, ETC. AS NECESSARY. INSTALL NEW CODE COMPLIANT HOT-DIP GALVANIZED RAILING. PAINT

AutoCAD SHX Text

AutoCAD SHX Text

EMERGENCY EXIT

AutoCAD SHX Text

DEMO DOOR AND FRAME

AutoCAD SHX Text INSTALL NEW CODE COMPLIANT HOT-DIP GALVANIZED HM DOOR AND FRAME. ALL DOOR SWINGS MUST BE TO THE OUTSIDE. PROVIDE RAIN GUARD. PAINT

AutoCAD SHX Text

AutoCAD SHX Text

LOADING DOCK STAIR

AutoCAD SHX Text

DEMO STAIR AND RAILING

AutoCAD SHX Text PROVIDE NEW CODE COMPLIANT 36" WIDE MINIMUM HOT-DIP GALVANIZED STEEL STAIR AND RAILING

AutoCAD SHX Text

AutoCAD SHX Text

STAIRS TO LEVEL 2

AutoCAD SHX Text

DEMO AS NECESSARY FOR CODE COMPLIANCE

AutoCAD SHX Text

RETROFIT OR BUILD NEW CODE COMPLIANT HOT-DIP GALVANIZED STEEL STAIR AND RAILING

AutoCAD SHX Text

AutoCAD SHX Text

CAGE FENCING

AutoCAD SHX Text

DEMO AS NECESSARY TO ALLOW UNINTERRUPTED PATH TO EXIT DOOR

AutoCAD SHX Text

REPAIR AS NECESSARY TO MATCH EXISTING

AutoCAD SHX Text

AutoCAD SHX Text

WOMEN HEAD

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text MAXIMIZE NUMBER OF WC, AND SINKS. ALL WCS AND SHOWERS MUST BE INDIVIDUAL. VERIFY WITH USER QUANTITIES OF EACH ITEM

AutoCAD SHX Text

AutoCAD SHX Text

MEN HEAD

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text MAXIMIZE NUMBER OF WC, URINALS, AND SINKS. ALL WCS, URINALS AND SHOWERS MUST BE INDIVIDUAL. VERIFY WITH USER QUANTITIES OF EACH ITEM

AutoCAD SHX Text

AutoCAD SHX Text

MEZZANINE STORAGE

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text ENCLOSE AREA WITH 2 " METAL STUDS WITH HIGH IMPACT MOISTURE RESISTANT GWB WALLS WITH HOT-DIP GALVANIZED 36" WIDE DOUBLE DOOR. PROVIDE FURRED OUT GWB CEILING. INSTALL BATT INSULATION IN ALLCAVITY WALLS AND 58" METAL STUDS WITH HIGH IMPACT MOISTURE RESISTANT GWB WALLS WITH HOT-DIP GALVANIZED 36" WIDE DOUBLE DOOR. PROVIDE FURRED OUT GWB CEILING. INSTALL BATT INSULATION IN ALLCAVITY WALLS AND CEILINGS. PAINT ALL WALL AND CEILING CONDITIONS

AutoCAD SHX Text

AutoCAD SHX Text

EXISTING CAGE FENCING

AutoCAD SHX Text

DO NOT DISTURB UNLESS SHOWN OTHERWISE.

AutoCAD SHX Text

THE LAYOUT SHOWN IS APPROXIMATE AND INCOMPLETE

AutoCAD SHX Text

AutoCAD SHX Text

CAGE FENCING

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text INSTALL NEW CAGE FENCING TO SEPARATE STORAGE AREA FROM ACCESS TO THE REQUIRED EXIT

AutoCAD SHX Text

AutoCAD SHX Text

NEW STORAGE

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text

PATCH EXISTING CONDITIONS AS NECESSARY TO MATCH EXISTING. PAINT

AutoCAD SHX Text

AutoCAD SHX Text

NEW JC & COMM ROOM

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text INSTALL GWB WALL FLOOR TO CEILING AND NEW HOT-DIP GALVANIZED HM FRAME AND DOOR 36" WIDE. INSTALL LINTEL TO BEAR 8" MIN EACH SIDE. PAINT

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A101

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

A B C

N

BUILDING AS4108

FIRST FLOOR "A"

t t

(X t t

(X t t

(X t t

(X t t

(X t t

(X tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t (X t

(X t (X t

(X t(X)

A B C

BUILDING AS4108

FIRST FLOOR "C"

N

(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t(X) t (X t

(X t (X t

(X t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS4108 (LEFT) - DEMO

A102

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS4108 (RIGHT) - DEMO

A102

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A102

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS4108

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

THIS NOTE IS NOT KEYED IN PL,ANS: DEMO ALL DOORS AND FRAMES, FLOORS, BASE, CEILINGS, FINISHES, MECHANICAL SYSTEMS (EXCLUDING BOILERS, BOILER PUMPS, & INFRARED HEATERS), ELECTRICAL SYSTEMS, PLUMBING FIXTURES AND ASSOCIATED PIPING, COMMUNICATION SYSTEMS, OVERHEAD CRANES, OVERHEAD DOORS, AND ASSOCIATED ITEMS, EXTERIOR WINDOWS & ASSOCIATED FLASHING AND TRIM, BIRD INTRUSION NETTING, FIRE DETECTORS. PROVIDE NEW SYSTEMS AS SHOWN IN THE RFP

BUILDING AS4108

SECOND FLOOR "A"

A B C

N

3 1 tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t t

(X tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t(X) t (X t

(X t (X t

(X t (X t (X t (X t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X)

A B C

BUILDING AS4108

SECOND FLOOR "C"

N

(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t (X t

(X t (X t

(X t (X t(X) t (X t (X t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS4108 (LEFT) - DEMO

A103

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS4108 (RIGHT) - DEMO

A103

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A103

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS4108

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

DATA/COMM ROOM

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text

BASE STANDARD FOR DATA/COMM ROOMS

AutoCAD SHX Text

AutoCAD SHX Text

MALE HEAD (OFFICERS AND ENLISTED PERSONNEL)

AutoCAD SHX Text

COMPLETE DEMOLITION

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

AutoCAD SHX Text

FEMALE HEAD

AutoCAD SHX Text

PARTIAL DEMOLITION

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

SAME AS GENERAL NOTE 2 FOUND IN SHEET A102

A B C

N

BUILDING AS4108

FIRST FLOOR "A"

t t

(X t t

(X t t

(X t t

(X t t

(X t t

(X tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t (X t

(X t (X t

(X t(X) I

STAIR

F

FLIGH EQ

D

ENL TOIL

D

ENL LOCKERS

K

MECH

I

STAIR

D

ENL TOIL

F

GSE

F

PHASED MAINT

F

Q/A

F

Q/A

F

AVIONICS

F

MAINT OFF

F

AVIONIC OFF

F

AVIONICS

F

TR

F

TOOLS

F

IMRL

F

QIR FRAME SH

F

SUPPLY RM

F

CORROS CTRL

F

PHASE/CC

F

GEAR

F

CLEAN

D

ENL SHOWERS

HANGAR

F

GEAR

D

ENL SHWR

D

ENL LOCKERS

F

FLIGHT EQ

F

MAINT OFF

F

QUALITY ASSR

F

MAINT&MATL CTRL

F

SEC STRGE

F

TOOLS

SEC STRGE

F

IMRL

F

OFFICE

F

CORROS CTRL

F

AIR FRAME SH

F

ELECT

F

FLIGHT EQ

F

GEAR

A B C

BUILDING AS4108

FIRST FLOOR "C"

N

(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t(X) t (X t

(X t (X t

(X

K

MECH

F

PHASED MAINT

F

SHACK/GSE

F

ORDIN SHOP

F

SEC STRGE

I

STAIR

K

MECH

D

ENL LOCKERS

F

HYDRAULICS SHOP

F

SUPPLY RM

F

CORROS CTRL

F

AIR FRAME SH

F

SHOP

F

LINE SHACK

F

PHASED MAINT

F

GSE

J

SEC STRGE

F

ORDIN SHOP

F

AVIONICS

F

MAINT OFF

F

QUALITY ASSUR

F

SEC STRGE

F

TOOLS

F

CLEAN RM

I

STAIR

D

ENL TOIL

F

AIR FRAME SH

F

CLEAN

D

ENL SHWR

t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS4108 (LEFT) - RENO

A104

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS4108 (RIGHT) - RENO

A104

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A104

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS4108

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

BUILDING AS4108

SECOND FLOOR "A"

A B C

N

3 1

OPER OFFICER

H

CAR. PL.

H

SAFETY FLIGHT

H

OPER OFFICE

H

COM OFFICE

H

INTEL OFFICE

H

C.O.

H

SARG MAJ.

H

ADJ.

H

STOR.

H

MAIL

H

X.O.

H

DATA/COMM

H

CLASS STOR.

H

ADM OFFICE

H

LEG OFFICER

H

S4 OFFICER

H

S4 OFFICE

H

CLOSET

H

CORR.

H

CLOSET

H

CLOSET

G

CORR.

G

CLOSET

G

COM OFFICE

H

INTEL OFFICE

H

OFFICE/S3

H

C.O.

G

SGT MJR.

G

ADJ.

G

STOR.

H

MAIL

H

CAR. PL.

H

X.O.

G

DATA/COMM

H

CLAS STOR.

H

S1/S4 OFFICE

H

LEG. OFFICER

H

S4 OFF

H

MEETING ROOM

H

W TOILET

D

ENL TOILET

D

OFF TOILET

D

OFF LOCKERS

D

GEAR

H

STAIR

I

OFF SHWRS

D

W TOILET

D

ENL. TOILET

D

OFFCR'S TOILET

D

OFF LOCKERS

D

OFFCR'S SHOWRS

D

DUTY OFFICER

H

SUPPLY RM

H

READY RM

H

GEAR

H

OPER OFF

H

SAFETY

FLIGHT

READY RM

H

DUTY OFFICER

H

SUPPLY RM

H

STAIR

I

STOR.

F

CORR.

H

CORR.

H

HANGAR

E

CORRIDOR

H

HANGAR

ADDN

H

209A tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t t

(X tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t(X) t (X t

(X t (X t

(X t (X t (X t (X t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X)

W SHWR&LOCKERS

D

A B C

BUILDING AS4108

SECOND FLOOR "C"

N

LEG OFFICER

H

S4 OFFICER

H

ADM OFFICE

H

DATA/COMM

H

CLASS. STOR.

H

X.O.

H

CAR. PL.

H

ADJ.

G

CLOSET

H

STORAGE

H

MAIL

H

C.O.

G

SGT MJR.

G

INTEL OFFICE

H

COM OFFICE

H

BREAK RM

L

FLIGHT SAFETY

H

OPER OFFICER

H

TRAIN. RM

H

SUPPLY RM

H

DUTY OFFICER

H

STAIR

I

CORR.

H

CLOSET

H

CORRIDOR

H

LEG OFFICER

H

S4 OFFICER

H

S4 OFFICE

H

STAIR

I

STOR.

H

OFF SHOWER

D

OFF LOCKERS

D

GEAR

H

OFFF TOILET

D

ENL TOILET

D

W. TOILET

D

S4 OFFICE

H

HANGAR

E

STOR.

H

C O

R R

I D

O R

H

A tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t t

(X t t

(X t t

(X t (X t

(X t (X t

(X t (X t(X) t (X t (X t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS4108 (LEFT) - RENO

A105

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS4108 (RIGHT) - RENO

A105

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text H

AutoCAD SHX Text G

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A105

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS4108

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

DATA/COMM ROOM

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text

BASE STANDARD FOR DATA/COMM ROOMS

AutoCAD SHX Text

AutoCAD SHX Text

MALE HEAD (OFFICERS AND ENLISTED PERSONNEL)

AutoCAD SHX Text

COMPLETE DEMOLITION

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

AutoCAD SHX Text

FEMALE HEAD

AutoCAD SHX Text

PARTIAL DEMOLITION

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

1 2 3 4 5 6 7 8 9 10 11 12 13 14

A

B

C

D

E

F

G

H

J

F

FLIGHT EQ

F

FLIGHT LINE

F

TOOL RM

F

CORROSION CTRL

F

F

ORDINANCE

K

ELECT RM

C

CORRIDOR

I

STAIR

I

ENTRY

F

ELECT/AVION

F

VAULT

F

CL WORKS

F

MAT CONT

F

MAINT OFF

F

MAINT ADM

M

HSK

F

MAINT CTRL

F

LOGS

F

QA

D

ANTERM

D

MEN'S LOCK

C

CORRIDOR

L

SNACK BAR

F

ENTRY

I

STAIR

F

FLIGHT EQ

K

MECH EQ

F

FLIGHT EQ

F

PHASE RM

C

CORRIDOR

C

ENTRY

F

QA

D

MEN'S HEAD

F

MAINT ADM

F

MAINT OFF

F

ELECT/AVION

F

VAULT

F

MATE CONT

F

MAINT CTRL

F

CLEAN WKST

F

PHASE

C

CORRIDOR

F

ORDINANCE

F

AIR FRAME SH

F

TOOL RM

F

CORROS CTRL

F

PHASE

D

MEN'S HEAD

K

MECH EQ

K

TEL RM

K

ELECT EQ

I

STAIR

F

ANTE RM

D

MEN'S LOCKER

F

LOGS

M

HSK

319A

C

ENTRY

I

STAIR

K

ELECT R

K

MECH EQ

K

MECH EQ

K

MECH EQ

F

FLIGHT EQ

F

CORRIDOR

I

STAIR

I

ENTRY

F

VAULT

F

MAT CONT

F

MAINT OFF

F

MAINT CTRL

F

LOGS

F

QA

F

MAINT ADM

F

ORDINANCE

D

MEN'S HEAD

D

MEN'S LOCKER

ELECT/AVION

F

OA

M

HSK

F

CLEAN WK ST

M/A tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt t t

(X t t

(X t t

(X t t

(X

14 15 16

A

B

C

D

E

F

G

H

J

F

FLIGHT LINE

F

TOOL RM

F

ELECT RM

F

VAULT

F

MAT CONT

F

MAINT OFF

F

CORRIDOR

I

STAIR

I

ENTRY

F

AIR FRAME SH

F

ORDINANCE

F

OIC

F

ELECT/AVION

F

CLEAN WK ST

F

M/A tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t t

(X t t

(X t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS3905 (LEFT) - DEMO

A106

1/16"= 1'-0"

LEVEL 1 FLOOR PLAN BLDG AS3905 (RIGHT) - DEMO

A106

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A106

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS4108

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

REFER TO RFP PART 3

AutoCAD SHX Text

1 2 3 4 5 6 7 8 9 10 11 12 13

A

B

C

D

E

F

G

H

J tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) t (X t (X) t (X t (X) t (X t (X) t (X t (X)

H

DUTY RM

H

READY RM

H

OFFICE

H

S-2

H

CORRIDOR

I

STAIR

H

S-3

H

SGT MJ

H

COMM OFF

H

OP OFF

M

HSK

F

ADJ

H

EX OFF

F

DATA/COMM

D

MEN'S LOCK

H

CORRIDOR

H

COMP RM

I

STAIR

H

HISTORY

D

MEN'S HEAD

H

OP OFF

H

SGT MAJ

H

HISTORY

H

ADJ

H

COM OFF

H

CLASSIED

C

CARR PLAN

H

OFFICE

H

DUTY RM

H

READY RM

H

CLASSIFIED

D

MEN'S HEAD

J

STRG

H

S-1

I

STAIR

D

MEN'S LOCKER

H

XO OFF

M

HSK

C

I

STAIR

H

STRGE

I

STAIR

I

ENTRY

H

XO OFF

H

OP OFF

D

MEN'S HEAD

D

MEN'S LOCKER

M

HSK

D

MEN'S HEAD

D

WOM'S HEAD

D

MEN'S HEAD

H

MAIL RM

H

S-4

H

HISTORY

J

STRG

J

STRG

H

COMP RM

H

DATA/COMP RM

D

HEAD

H

S-3

H

S-2

H

STRGE

H

MAIL RM

H

S-4

H

COMP RM

H

S-1

D

WOMS HEAD

H

DATA/COMP RM

D

HEAD

H

ADJ

H

S-1

H

S-4

H

MAIL RM

13 14 15 16

A

B

C

D

E

F

G

H

J

(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X) tt(X)

H

DUTY RM

H

XO OFF

I

STAIR

H

OP OFF

MEN'S HEAD

D

MEN'S LOCKER

H

READY RM

H

DATA/COMP RM

D

HEAD

H

COMM OFF

H

ADJ

H

SGT MAJ

H

S-3

H

S-2

H

OFFICE

H

CLASSIFIED

H

CORRIDOR

t(X) t(X) tt(X) tt(X)

SHEET:

80091

E1

MARINE CORPS BASE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

CAMP LEJEUNE, NORTH CAROLINA

DESIGN DIR.

SUBMITTED BY:

NAVFAC DRAWING NO.CODE IDENT. NOSIZE

SPEC.SCALE:

SATISFACTORY TO:

APPROVED: PWO OR OICC:

DR.

DES.

CHK.

CONST. CONTR. NO.

DATE:

DATE:

OF

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS3905 (LEFT) - DEMO

A107

1/16"= 1'-0"

LEVEL 2 FLOOR PLAN BLDG AS3905 (RIGHT) - DEMO

A107

AutoCAD SHX Text NOTES: 1. THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN THE DESIGNER OF RECORD MUST FIELD VERIFY ALL THE CONDITIONS SHOWN. THESE DETAILS AND RECOMMENDATIONS MUST NOT BE CONSIDERED THE FINAL DESIGN. IT IS THE DESIGNER OF RECORD RESPONSIBILITY TO REPRESENT THE SCOPE OF WORK IN SUFFICIENT DETAILS IN THE DRAWINGS AND TO DESCRIBE IT IN SUFFICIENT DETAIL IN THE SPECIFICATIONS. THE SECTIONS AND DETAILS ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CALCULATIONS TO DETERMINE APPROPRIATE MATERIALS, LOADS, CODE COMPLIANCE REQUIREMENTS, ETC. 2. THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL THE DESIGNER OF RECORD MUST PRESENT THE PROPOSED SOLUTION(S) DURING THE CDW TO ENSURE THAT IT IS CONSISTENT WITH THE DESIGN INTENT OF THE MCBCL 3. THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE THE DESIGNER OF RECORD MUST PERFORM THE APPROPRIATE CODE COMPLIANCE ANALYSIS BASED ON OCCUPANCY TO DETERMINE THE MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURES, REQUIRED EXITS, ETC. ALL THE FLOOR PLAN LAYOUTS MUST BE APPROVED BY THE USER AT THE CDW. THIS APPLIES TO: THE SCOPE OF WORK (SOW) SHOWN WITHIN BLOCKED AREAS ON THE DRAWINGS DEVELOPED FLOOR PLAN LAYOUTS SHOWING FOR EXAMPLE: TOILET FIXTURES, FURNITURE, CABINETS, EXITS, ETC. ARE GENERIC IN NATURE AND NOT THE FINAL CONFIGURATION 4. INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING INTERIOR WALL TYPES: IN GENERAL INTERIOR WALLS ARE CMU, EXCEPT BUILDING 320 CMU WITH PLASTER, AND 1707 CMU WITH FURRED OUT GWB. FIELD VERIFY THESE CONDITIONS. REPAIR AND NEW WALLS MUST MATCH EXISTING 5. PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING PROVIDE CODE ANALYSIS FOR EACH BUILDING. VERIFY WALL RATING REQUIREMENTS SHOWN IN THE RFP. AS424 DOES NOT SHOWN ANY BECAUSE ORIGINAL CONSTRUCTION DOCUMENTS WERE NOT FOUND. PROVIDE REQUIRED WALL RATINGS FOR BUILDING AS424 OR JUSTIFICATION IF NONE IS REQUIRED

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

2-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text

1-HR RATED WALLS AND OPENINGS

AutoCAD SHX Text DISCLOSURE OF INFORMATION CONTRACTOR SHALL COMPLY AS FOLLOWS: A. THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CON- TRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS: (1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR (2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE. B. REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE. C. THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER THIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

AutoCAD SHX Text A107

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

GUSTAVO DE LUCA

AutoCAD SHX Text

THOMAS BURTON

AutoCAD SHX Text PWO or OICC

AutoCAD SHX Text

21DECT2019

AutoCAD SHX Text

AS FACILITY REPAIR

AutoCAD SHX Text

AS424, AS3905, AS4108

AutoCAD SHX Text

BLDG AS424 DEMO AND RENO FLOOR PLANS

AutoCAD SHX Text

60XXXXX

AutoCAD SHX Text 19-0118

AutoCAD SHX Text

NOTED

AutoCAD SHX Text

NA

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text No.

AutoCAD SHX Text

ITEMS FOR AS3905

AutoCAD SHX Text

DEMO NOTE

AutoCAD SHX Text

RENO NOTE

AutoCAD SHX Text

AutoCAD SHX Text

DATA/COMM ROOM

AutoCAD SHX Text

DEMO AS NECESSARY

AutoCAD SHX Text

BASE STANDARD FOR DATA/COMM ROOMS

AutoCAD SHX Text t(X) t(X) tt(X) tt(X)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

A

B

C

D

E

F

G

H

J

F

FLIGHT EQ

F

FLIGHT LINE

F

TOOL RM

F

CORROSION CTRL

F

F

ORDINANCE

K

ELECT RM

C

CORRIDOR

I

STAIR

I

ENTRY

F

ELECT/AVION

F

VAULT

F

CL WORKS

F

MAT CONT

F

MAINT OFF

F

MAINT ADM

M

HSK

F

MAINT CTRL

F

LOGS

F

QA

D

ANTERM

D

MEN'S LOCK

C

CORR…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .