The file's text, extracted by GovTribe without its formatting.
DATA PRODUCT DELIVERABLE:
This worksheet is used to select data deemed necessary by the government. Data should be used to feed down stream Government process.
SELECT EXPLANATION
A As applicable N New “P” source code items
B Packaging, Bulk items O “Ref” items only
C COTS items P All “P” source code items
D Developmental items R Repairables only
E Support Equipment S SRA/SRU items
F First appearance items only T Registered Support Equipment Only
I NDI items U Non-Registered Support Equipment Only
L LRU/WRA items Y National Stock Number items
M Packaging, Common items X Data product required on all items
NOTE: Other codes may be assigned by the program office as identified below. Program specific selections and explanations.
Z - Unique to LSAR and ICAPS software. Not a part of Data Product Deliverable format or LMI Specification
(MIL-PRF-49506). NOTE FOR THE PM: SEE SECTION 4 OF THE PMG FOR ADDITIONAL GUIDANCE IN
SELECTING DATA REQUIREMENTS. This LMI Worksheet has been modified for Navy use.
DATA PRODUCT DELIVERABLES
| DPDN |
| DATA PRODUCT TITLE |
| LLTIL |
| PPL |
| ISIL |
| TTEL |
| SCPL |
| DCN |
| SLPPL |
| ADDITIONAL INFORMATION |
| 0010 |
| ALLOWANCE ITEM CODE (AIC) |
| A |
| A |
| A |
| 0020 |
| ALLOWANCE ITEM QUANTITY |
| A |
| A |
| A |
| 0030 |
| ALTERNATE INDENTURED PRODUCT CODE (AIPC) |
ALTERNATE IPC - UUT
| 0040 |
| AUTOMATIC DATA PROCESSING EQUIPMENT CODE |
Record B, Block 28
| 0050 |
| BASIS OF ISSUE (BOI) |
Record J, Block 87
QUANTITY AUTHORIZED (QTY-AUTH)
END ITEM
LEVEL
CONTROL
| 0060 |
| CALIBRATION AND MEASUREMENT REQUIREMENTS SUMMARY RECOMMENDED |
| 0070 |
| CALIBRATION INTERVAL |
| 0090 |
| CALIBRATION PROCEDURE |
| 0100 |
| CALIBRATION REQUIRED |
| 0120 |
| CHANGE AUTHORITY NUMBER |
X
Record F, Block 66
| 0130 |
| CLEANING AND DRYING PROCEDURE |
| 0140 |
| COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE |
| X |
| X |
| X |
CAGE CODE - ADAPTER INTERCONNECTOR DEVICE
CAGE CODE – ARN
Record A, CSN>001, Block 5
CAGE CODE - ARN ITEM
CAGE CODE - ARTICLES REQUIRING SUPPORT
CAGE CODE – ATE
CAGE CODE - CATEGORY III SE
CAGE CODE – CTIC
CAGE CODE - PACKAGING DATA PREPARER
CAGE CODE - SUPPORT EQUIPMENT
CAGE CODE - TEST PROGRAM SET
CAGE CODE – UUT
| 0150 |
| CONTRACTOR FURNISHED EQUIPMENT/GOVERNMENT FURNISHED EQUIPMENT (CFE/GFE) |
| 0160 |
| CONTRACTOR RECOMMENDED |
CONTRACTOR RECOMMENDED - DDCC
CONTRACTOR RECOMMENDED - IRCC
| 0170 |
| CONTRACTOR TECHNICAL INFORMATION CODE (CTIC) |
Record E, Block 61
| 0180 |
| CONTROLLED INVENTORY ITEM CODE |
Record B, Block 26
Record J, Block 88
| 0200 |
| CUSHIONING AND DUNNAGE MATERIAL CODE |
| 0210 |
| CUSHIONING THICKNESS |
| 0220 |
| DEGREE OF PROTECTION CODE |
| 0230 |
| DEMILITARIZATION CODE (DMIL) |
| A |
| A |
| A |
| 0240 |
| DESCRIPTION/FUNCTION AND CHARACTERISTICS OF SUPPORT EQUIPMENT |
| 0250 |
| DESIGN DATA CATEGORY CODE |
| 0270 |
| END ITEM ACRONYM CODE (EIAC) |
| 0280 |
| ESSENTIALITY CODE |
| X |
| X |
| X |
| 0290 |
| ESTIMATED PRICE |
| X |
| X |
| X |
ESTIMATED PRICE - DDCC
ESTIMATED PRICE - IRCC
Record J, Block 81
| 0330 |
| FUNCTIONAL GROUP CODE |
| 0340 |
| HARDNESS CRITICAL ITEM (HCI) |
Record B, Block 25
| 0350 |
| HARDWARE DEVELOPMENT PRICE |
| 0370 |
| INDENTURE CODE |
| A |
| A |
| A |
ATTACHING PART/HARDWARE
OPTION 1
OPTION 2
OPTION 3
OPTION 4
OPTION 5
INDENTURE FOR KITS
OPTION 1
OPTION 2
OPTION 3
INDENTURE CODE - IPC
| 0380 |
| INDENTURED PRODUCT CODE (IPC) |
Record H, Block 77. Change Field Length to 18X
INDENTURED PRODUCT CODE (IPC) - UUT
OPERATING RANGE - MINIMUM
OPERATING RANGE - MAXIMUM
ALTERNATING CURRENT/DIRECT CURRENT
FREQUENCY RANGE - MINIMUM
FREQUENCY RANGE - MAXIMUM
PHASE
WATTS
PERCENT MAXIMUM RIPPLE
| 0400 |
| INSTALLATION FACTORS OR OTHER FACILITIES |
| 0410 |
| INTEGRATED LOGISTIC SUPPORT PRICE |
| 0420 |
| INTEGRATED LOGISTIC SUPPORT REQUIREMENTS CATEGORY CODE |
| 0430 |
| INTERCHANGEABILITY CODE |
A
Record F, Block 67, Part Number Adds, Changes, and Deletes
| 0440 |
| INTERMEDIATE CONTAINER CODE |
| 0450 |
| INTERMEDIATE CONTAINER QUANTITY |
| 0460 |
| ITEM CATEGORY CODE (ICC) |
| 0470 |
| ITEM DESIGNATOR CODE |
Header Block
ITEM DESIGNATOR - END ARTICLE
ITEM DESIGNATOR - GOVERNMENT
| X |
| X |
| Record A, Block 12. Change Field Length to 19X |
ITEM NAME - ARTICLE REQUIRING SUPPORT
ITEM NAME - SE
Record J, Block 89
Record J, Block 82
| 0510 |
| JULIAN DATE - SPI NUMBER |
| 0520 |
| LINE REPLACEABLE UNIT (LRU) |
Record J, Block 90
FROM
TO
| 0540 |
| MAINTENANCE ACTION CODE (MAC) |
Record C, Block 41
| 0550 |
| MAINTENANCE REPLACEMENT FACTOR (MRF) |
MRF - DEPOT LEVEL REPAIRABLES
MRF - FIELD LEVEL REPAIRABLES
MRF - CONSUMABLES
| 0560 |
| MAINTENANCE REPLACEMENT RATE I (MRRI) |
| X |
| X |
| X |
| 0570 |
| MAINTENANCE REPLACEMENT RATE II (MRRII) |
Record C, Block 35
OPTION 1
OPTION 2
| 0580 |
| MAINTENANCE TASK DISTRIBUTION |
Record E, Block 57
Record M, Block 92
| 0620 |
| MAXIMUM ALLOWABLE OPERATING TIME (MAOT) |
Record C, Block 40
| 0630 |
| MEAN TIME BETWEEN FAILURES (MTBF) |
MEAN TIME BETWEEN FAILURES (MTBF)- SUPPORT
EQUIPMENT (SE)
| 0640 |
| MEAN TIME TO REPAIR (MTTR) |
MEAN TIME TO REPAIR (MTTR) - SE
| 0650 |
| MEASUREMENT BASE (MB) |
MEASUREMENT BASE - MTBF
MEASUREMENT BASE - MTBF-SE
MEASUREMENT BASE - WEAROUT LIFE
| 0660 |
| METHOD OF PRESERVATION |
| 0670 |
| MOBILE FACILITY CODE |
| 0680 |
| NATIONAL STOCK NUMBER AND RELATED DATA |
| A |
| A |
| A |
| A |
| A |
| Record B, Block 15, Required if Contract Option is exercised. |
| MATERIEL CONTROL CODE |
| A |
| A |
| A |
| FEDERAL SUPPLY CLASSIFICATION |
| A |
| A |
| A |
| NATIONAL ITEM IDENTIFICATION NUMBER |
| A |
| A |
| A |
NATIONAL STOCK NUMBER - CONTAINER
FEDERAL SUPPLY CLASSIFICATION
NATIONAL ITEM IDENTIFICATION NUMBER
SPECIAL MATERIEL IDENTIFICATION CODE/MATERIEL
MANAGEMENT AGGREGATION CODE
ACTIVITY CODE
| 0690 |
| NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE NUMBER (NHA PLISN) |
| X |
| X |
| X |
| X |
| X |
| Record C, Block 29, Automatically assigned by ICAPS. |
| 0700 |
| NEXT HIGHER ASSEMBLY PROVISIONING LIST ITEM SEQUENCE NUMBER INDICATOR (NHA IND) |
Record C, Block 30
| 0710 |
| NOT REPARABLE THIS STATION (NRTS) |
Record C, Block 42
| 0730 |
| OPTIONAL PROCEDURE INDICATOR |
| 0740 |
| OVERHAUL REPLACEMENT RATE (ORR) |
Record C, Block 31
| 0750 |
| PACKAGING CATEGORY CODE |
INPUT/OUTPUT CODE - CATEGORY III SE
PARAMETER - CATEGORY III SE
RANGE FROM - CATEGORY III SE
RANGE TO - CATEGORY III SE
ACCURACY - CATEGORY III SE
RANGE/VALUE CODE - CATEGORY III SE
INPUT/OUTPUT CODE - SUPPORT EQUIPMENT
PARAMETER - SUPPORT EQUIPMENT
RANGE FROM - SUPPORT EQUIPMENT
RANGE TO - SUPPORT EQUIPMENT
ACCURACY - SUPPORT EQUIPMENT
RANGE/VALUE CODE - SUPPORT EQUIPMENT
INPUT/OUTPUT CODE - UUT
PARAMETER - UUT
RANGE FROM - UUT
RANGE TO - UUT
ACCURACY - UUT
RANGE/VALUE CODE - UUT
OPERATIONAL/SPECIFICATION PARAMETER
| 0790 |
| PRECIOUS METAL INDICATOR CODE (PMIC) |
| A |
| A |
| A |
| 0810 |
| PRESERVATION MATERIAL CODE |
| 0820 |
| PRIOR ITEM PROVISIONING LIST ITEM SEQUENCE NUMBER (PRIO ITEM PLISN) |
| X |
| X |
| X |
| X |
| X |
| Record C, Block 39, Automatically assigned by ICAPS |
| 0830 |
| PRODUCTION LEAD TIME (PLT) |
| A |
| A |
| A |
| 0840 |
| PROGRAM PARTS SELECTION LIST (PPSL) |
Record A, Block 10
| 0850 |
| PRORATED EXHIBIT LINE ITEM NUMBER (PRORATED ELIN) |
Record G, Block 75
| 0860 |
| PRORATED ELIN QUANTITY |
Record G, Block 76
| 0870 |
| PROVISIONING CONTRACT CONTROL NUMBER (PCCN) |
| X |
| X |
| X |
| X |
| X |
| Records A through M, Block 1 |
| 0880 |
| PROVISIONING LIST CATEGORY CODE (PLCC) |
Record D, Block 48
| 0890 |
| PROVISIONING LIST ITEM SEQUENCE NUMBER (PLISN) |
| X |
| X |
| X |
| X |
| X |
| Records A through M, Block 2 |
| 0900 |
| PROVISIONING NOMENCLATURE |
| A |
| A |
| A |
| A |
| A |
| Record K, Block 91, Change Field Length to 42X |
| 0910 |
| PROVISIONING PRICE CODE |
| 0920 |
| PROVISIONING REMARKS |
Record H, Block 79,Change Field Length to 65X
| 0930 |
| QUANTITY PER ASSEMBLY (QPA) |
| X |
| X |
| X |
OPTION 2
OPTION 3
| 0940 |
| QUANTITY PER ASSEMBLY/QUANTITY PER END ITEM INDICATOR |
| 0950 |
| QUANTITY PER END ITEM (QPEI) |
| X |
| X |
| X |
OPTION 2
OPTION 3
Record J, Block 85
| 0980 |
| QUANTITY PER UNIT PACK |
Record B, Block 21
Record F, Block 73
Record F, Block 72
| 1010 |
| RECOMMENDED MINIMUM SYSTEM STOCK LEVEL |
Record D, Block 53
| 1030 |
| REFERENCE DESIGNATION |
| A |
| A |
| A |
| A |
| A |
| Record D, Block 44, Change Field Length to 29X |
| A |
| A |
| Required for Electronic Items having Circuit Symbol Numbers |
OPTION 2
OPTION 3
OPTION 4
OPTION 5
| 1040 |
| REFERENCE DESIGNATION CODE (RDC) |
| A |
| A |
| A |
| 1050 |
| REFERENCE NUMBER |
| X |
| X |
| X |
REFERENCE NUMBER - AID
REFERENCE NUMBER - ARN ITEM
REFERENCE NUMBER - ARTICLES REQUIRING SUPPORT
REFERENCE NUMBER - AUTOMATIC TEST EQUIPMENT
REFERENCE NUMBER - CATEGORY III SE
REFERENCE NUMBER - SUPPORT EQUIPMENT
REFERENCE NUMBER - TPS
REFERENCE NUMBER - UUT
REFERENCE NUMBER (ARN) - ADDITIONAL
Record A, Block 6, CSN>001
| 1060 |
| REFERENCE NUMBER CATEGORY CODE (RNCC) |
| X |
| X |
| X |
| REFERENCE NUMBER CATEGORY CODE - ARN |
| A |
| A |
| A |
| 1070 |
| REFERENCE NUMBER VARIATION CODE (RNVC) |
| X |
| X |
| X |
| REFERENCE NUMBER VARIATION CODE - ARN |
| A |
| A |
| A |
Record E, Block 58
OPTION 1
OPTION 2
| 1090 |
| REPLACED OR SUPERSEDING PROVISIONING LIST ITEM SEQUENCE NUMBER |
Record F, Block 70
| 1100 |
| REPLACED OR SUPERSEDING PROVISIONING LIST ITEM SEQUENCE NUMBER |
Record F, Block 71
| 1110 |
| REPLACEMENT TASK DISTRIBUTION |
Record E, Block 59
REVISION - SERD
| 1130 |
| REWORK REMOVAL RATE (RRR) |
| 1140 |
| ROTATABLE POOL FACTOR (RPF) |
| 1150 |
| SAME AS PROVISIONING LIST ITEM SEQUENCE NUMBER (SAME AS PLISN) |
| X |
| X |
| X |
| X |
| X |
| Record G, Block 38, Automatically assigned by ICAPS |
SCOPE - DDCC
SCOPE - IRCC
| 1170 |
| SERIAL NUMBER EFFECTIVITY |
Record F, Block 68
SERIAL NUMBER EFFECTIVITY - FROM
SERIAL NUMBER EFFECTIVITY - TO
| 1180 |
| SERVICE DESIGNATOR CODE (SER) |
SERVICE DESIGNATOR CODE - SE
SERVICE DESIGNATOR CODE - USING
| 1190 |
| SHELF LIFE (SL) |
| A |
| A |
| A |
| A |
| A |
| Record A, Block 13. Required when Source Code = PC |
| 1200 |
| SHELF LIFE ACTION CODE (SLAC) |
| A |
| A |
| A |
| A |
| A |
| Record A, Block 14, Required when there is a Shelf Life |
| 1210 |
| SKILL SPECIALTY CODE FOR SUPPORT EQUIPMENT OPERATOR |
Record D, Block 49
| 1220 |
| SOURCE, MAINTENANCE AND RECOVERABILITY (SMR) CODE |
| A |
| A |
| A |
SMR CODE - SE
| 1230 |
| SPARES ACQUISITION INTEGRATED WITH PRODUCTION (SAIP) |
| 1240 |
| SPECIAL MAINTENANCE ITEM CODE (SMIC) |
Record D, Block 49
| 1250 |
| SPECIAL MARKING CODE |
| 1260 |
| SPECIAL MATERIAL CONTENT CODE (SMCC) |
| 1270 |
| SPECIAL PACKAGING INSTRUCTION NUMBER |
| 1280 |
| SPECIAL PACKAGING INSTRUCTION (SPI) NUMBER REVISION |
| 1290 |
| SUPPLEMENTAL PACKAGING DATA |
| 1300 |
| SUPPORT EQUIPMENT DIMENSIONS |
SE DIMENSIONS OPERATING
LENGTH
WIDTH
HEIGHT
SE DIMENSIONS SHIPPING
LENGTH
WIDTH
HEIGHT
SE DIMENSIONS STORAGE
LENGTH
WIDTH
HEIGHT
| 1310 |
| SUPPORT EQUIPMENT EXPLANATION |
| 1320 |
| SUPPORT EQUIPMENT RECOMMENDATION DATA NUMBER (SERD NUMBER) |
| 1330 |
| SUPPORT EQUIPMENT RECOMMENDATION DATA REVISION/SUPERSEDURE REMARKS |
| 1340 |
| SUPPORT EQUIPMENT WEIGHT |
SUPPORT EQUIPMENT WEIGHT - OPERATING
SUPPORT EQUIPMENT WEIGHT - SHIPPING
SUPPORT EQUIPMENT WEIGHT - STORAGE
| 1350 |
| TECHNICAL MANUAL CHANGE NUMBER (TM CHG) |
Record J, Block 83
| 1360 |
| TECHNICAL MANUAL INDENTURE CODE (TM IND) |
Record J, Block 84
| 1370 |
| TECHNICAL MANUAL NUMBER |
| 1380 |
| TEST ACCURACY RATIO (TAR) |
TEST ACCURACY RATIO - CATEGORY III SE
TEST ACCURACY RATIO - UUT PARAMETER
| 1390 |
| TOTAL ITEM CHANGES (TIC) |
Record F, Block 69
| 1400 |
| TOTAL QUANTITY RECOMMENDED |
Record C, Block 37
| 1420 |
| TYPE OF CHANGE CODE (TOCC) |
| A |
| A |
| A |
| 1440 |
| TYPE OF STORAGE CODE |
| 1460 |
| UNIT CONTAINER LEVEL |
| 1470 |
| UNIT OF ISSUE (UI) |
| X |
| X |
| X |
| 1480 |
| UNIT OF ISSUE CONVERSION FACTOR (UI CONVERSION FACTOR) |
| A |
| A |
| A |
| A |
| A |
| Record B, Block 20, Required if UI not equal to EA |
| 1490 |
| UNIT OF ISSUE/UNIT OF MEASURE CODE |
| A |
| A |
| A |
| 1500 |
| UNIT OF ISSUE/UNIT OF MEASURE PRICE (UI/UM PRICE) |
| A |
| A |
| A |
| A |
| A |
| Record B, Unit of Issue Price=Block 19. Unit of Measure Price=Block 17 (only if UM is assigned). |
| 1510 |
| UNIT OF MEASURE (UM) |
| A |
| A |
| A |
| A |
| A |
| Record B, Block 16. Guidance for assignment provided at PGC. |
UNIT OF MEASURE - SE DIMENSIONS OPERATING
UNIT OF MEASURE - SE WEIGHT OPERATING
UNIT OF MEASURE - SE DIMENSIONS STORAGE
UNIT OF MEASURE - SE WEIGHT STORAGE
UNIT OF MEASURE - SE DIMENSIONS SHIPPING
UNIT OF MEASURE - SE WEIGHT SHIPPING
UNIT SIZE - LENGTH
UNIT SIZE - WIDTH
UNIT SIZE - HEIGHT
UNIT SIZE - PACK LENGTH
UNIT SIZE - PACK WIDTH
UNIT SIZE - PACK DEPTH
| 1540 |
| UNIT UNDER TEST EXPLANATION |
UNIT WEIGHT - PACK
| 1560 |
| USABLE ON CODE (UOC) |
A
Record D, Block 43
USABLE ON CODE - DESIGN CHANGE
A
USABLE ON CODE - SUPPORT EQUIPMENT
Record J, Block 86
WORK UNIT CODE - ARTICLES REQUIRING SUPPORT
LMI WORKSHEET MODIFIED FOR NAVY USE N00024-16-R-4319 Attachment J-11
SUPPLEMENTAL PROVISIONING DATA PRODUCTS*
DATA PRODUCT DELIVERABLES
| SDPDN |
| DATA PRODUCT TITLE |
| LLTIL |
| PPL |
| ISIL |
| TTEL |
| SCPL |
| DCN |
| SLPPL |
| ADDITIONAL INFORMATION |
1 A
| S002 |
| ACQUISITION METHOD CODE (AMC) |
1 A/N
| S003 |
| ACQUISITION METHOD SUFFIX CODE (AMSC) |
1 A/N
| S004 |
| ALLOWANCE EQUIPAGE LIST QUANTITY (AELQTY) |
25 A/N (3 A/N 7 TIMES AND 4 A/N 1 TIME)
| S005 |
| ALTERNATE NATIONAL ITEM IDENTIFICATION NUMBER (ALTNIIN) |
1 A/N
| S006 |
| ALTERNATE NIIN RELATIONSHIP CODE (ANRC) |
9A/N
1 A (X)
| S008 |
| COMPONENT IDENTIFICATION DATA (CID)^ |
| A |
| A |
| A |
| A |
| A |
| See the “Expanded Component Identification Data (CID) Format Table” Provided Below. |
10 A/N
| S010 |
| DESIGN CHANGE NOTICE USABLE ON CODE (DCN UOC) |
A
8 A/N
| S011 |
| DESIGNATED REWORK/OVERHAUL POINT (DOP) (DESREWRK) |
| A |
| A |
| A |
| S012 |
| DOCUMENT AVAILABILITY CODE (DAC) |
1 A/N
2 A/N
A/N
| S015 |
| ITEM MANAGEMENT CODE (IMC) |
1 A
| S016 |
| KEY PROVISIONING CONTRACT CONTROL NUMBER (KEY PCCN) |
6 A/N
8 N (MMDDYYYY)
| S018 |
| MAINTENANCE REPLACEMENT RATE MODIFIER (MRRMOD) |
7 A/N
| S019 |
| MINIMUM REPLACEMENT UNIT (MRU)/FAILURE FACTOR II |
| X |
| X |
| X |
| S020 |
| NOMENCLATURE OR MODEL OR TYPE NUMBER |
21 A/N
| S021 |
| PROCUREMENT INSTRUMENT IDENTIFICATION (PII INCLUDING PIIN/SPIIN) |
19 A/N
1A
| S023 |
| RECOMMEND INITIAL SYSTEM STOCK BUY (RISS BUY) |
3 N
| S024 |
| RECOMMENDED TENDER LOAD LIST QUANTITY (RTLL) |
3 N
| S025 |
| REFERENCE DESIGNATION OVERFLOW CODE (RDOC) |
| A |
| A |
| A |
| S026 |
| RELIABILITY BLOCK DIAGRAM (RBD) |
10 A/N
| S027 |
| REMAIN IN PLACE INDICATOR (RIP IND) |
A
A
1 A
| S029 |
| REPAIRABLE IDENTIFICATION CODE (RIC) |
10 A/N
| S030 |
| REPAIR SURVIVAL RATE (RSR) |
3 N
| S031 |
| SUBMISSION CONTROL CODE (SCC) |
5 N
| S032 |
| SUPPLEMENTAL NOMENCLATURE |
25 A/N
* These Supplemental Data Products are not in the LMI Specification. See the narrative portion of this LMI Worksheet for definitions and format requirements.
^ See the Expanded Component Identification Data (CID) Format Table for detailed requirements.
EXPANDED COMPONENT IDENTIFICATION DATA (CID) FORMAT TABLE
DATA PRODUCT DELIVERABLES
| SDPDN |
| DATA PRODUCT TITLE |
| LLTIL |
| PPL |
| ISIL |
| TTEL |
| SCPL |
| DCN |
| SLPPL |
| SPS |
| ADV RIC |
| ADDITIONAL INFORMATION |
HEADER DATA
| 0870 |
| PROVISIONING CONTRACT CONTROL NUMBER (PCCN) |
| X |
| X |
| X |
| S021 |
| PROCUREMENT INSTRUMENT IDENTIFICATION (PII INCLUDING PIIN/SPIIN) |
| X |
| X |
| X |
| S020 |
| NOMENCLATURE OR MODEL OR TYPE NUMBER |
| X |
| X |
| X |
X
| 0140 |
| PRIME COMMERCIAL AND GOVERNMENT ENTITY (CAGE CODE) |
| X |
| X |
| X |
X
| S031 |
| SUBMISSION CONTROL CODE (SCC) |
| X |
| X |
| X |
| S017 |
| LIST DATE SUBMITTED |
| X |
| X |
| X |
| S013 |
| FORMAT INDICATOR |
| X |
| X |
| X |
| S029 |
| REPAIRABLE IDENTIFICATION CODE (RIC) |
| A |
| A |
| A |
10 A/N
| A |
| A |
| A |
| X |
| 43 X L; For Advance RICs, the submitter must identify Date Advance RIC was requested and Scheduled date for complete PTD to be provided to the NAVSEA TSA. |
COMPONENT CHARACTERISTICS FILE (CCF) DATA
X
A
X
| X |
| X |
| 56 XL(HM&E/ORDNANCE ONLY) |
X
| X |
| X |
| 56 XL(HM&E/ORDNANCE ONLY) |
A
| A |
| A |
| 56 XL(HM&E/ORDNANCE ONLY) |
A
| A |
| A |
| 56 XL(HM&E/ORDNANCE ONLY) |
A
A
| A |
| A |
| 56 XL (HM&E/ORDNANCE ONLY) |
A
| A |
| A |
| 56 XL (ORDNANCE ONLY) |
A
| A |
| A |
| 56 XL (ORDNANCE ONLY) |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
| S008 |
| COMMERCIAL NOMEN |
| A |
| A |
| A |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
| S008 |
| SOURCE OF APL INFO |
| A |
| A |
| A |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
| S008 |
| PROV PARTS LIST |
| A |
| A |
| A |
A
| A |
| A |
| 56 XL (ELECTRONICS ONLY) |
| S008 |
| CHARACTERISTICS DATA |
| X |
| X |
| X |
X
| X |
| X |
| 56 XL (UNLIMITED ENTRIES); CHARACTERISTICS DATA SHOULD PROVIDE THE REASON FOR PROVISIONING, I.E., SHIPALT, MACHALT, AER, ETC., AND THE ALTERATION NUMBER ASSIGNED. EXAMPLE: SHIPALT CG47-0586D. |
| S008 |
| TECHNICAL MANUAL NUMBER |
| A |
| A |
| A |
A
| S008 |
| CERTIFICATION DATA SHEET NO. |
| A |
| A |
| A |
A
APPLICATION DATA
| S008 |
| NEXT HIGHER ASSEMBLY (NHA) |
| X |
| X |
| X |
X
| S008 |
| NEXT LOWER ASSEMBLY (NLA) |
A
| S008 |
| NAVY HULL NOS./ACTIVITY UNIT IDENTIFICATION CODE (UIC) |
| X |
| X |
| X |
| S008 |
| NUMBER OF COMPONENTS |
| X |
| X |
| X |
X
| S008 |
| SERVICE APPLICATION DATA |
| X |
| X |
| X |
CERTIFICATION DATA
| S008 |
| POC DATA (NAME) |
| X |
| X |
| X |
| S008 |
| POC DATA (ORGANIZATION/CODE) |
| X |
| X |
| X |
| S008 |
| POC DATA (PHONE) |
| X |
| X |
| X |
STATEMENT OF PRIOR SUBMISSION (SPS)
| S008 |
| SPS PREVIOUS ORDER NUMBER |
X
32 XL
| S008 |
| PROVISIONING ACTIVITY RECEIVING PREVIOUS PTD |
X
32 XL
| S008 |
| NATIONAL STOCK NUMBER (NSN) OR NAVY ITEM CONTROL NUMBER (NICN) |
X
32 XL
| S008 |
| ELECTRICAL, MECHANICAL, PHYSICAL, AND DIMENSIONAL DATA |
X
32 XL
| S008 |
| NUMBER OR PERCENT OF CHANGES TO UPDATE PTD TO NEW CONFIGURATION |
X
32 XL
| S008 |
| BRIEF DESCRIPTION OF CHANGES |
X
32 XL
Note: The Supplemental Data Products (those with a prefix “S”) are not in the LMI Specification. See the narrative portion of this worksheet for definitions and format requirements for CID.
