Attachment 009 - Proof Gun system Overview Distro A - Embedded video 1.pdf
PDF 7 MB Posted
- Attached to
- Mobile Tactical Cannon - Tracked (MTC-T) and Resupply Vehicle – Tracked (RSV-T) Capability Solutions
- Solicitation number
- MOSAIC-27-01
- Issued by
-
Department of the Army
About this file
This document is an overview briefing on the Artillery Proof Gun Stand (PGS), an interoperability platform developed by the U.S. Government and managed by the Joint Program Executive Office for Armaments & Ammunition. The PGS is a hard-mounted testing platform initially fielded in 2023 with additional fielding planned for 2025. The system eliminates the need to use existing weapon systems for testing purposes, thereby mitigating wear and tear on operational cannons. The platform is designed for ammunition evaluation (including new, foreign, and lot acceptance testing), cannon evaluation (including proofing and interior ballistics assessment), and interoperability testing through standardized methodology that enables shareable data and direct one-to-one comparisons.
The PGS features a hard-mounted platform with elevation operational range from -2.5° to 72° and full 360° traverse, engineered for a 30-year service life in harsh environments. The modular gun mount accepts variable cannon configurations from 105mm to 155mm (23-58 caliber length), utilizing a "Tube Sleeve" interface that accommodates cannons up to 13 inches in diameter. Current configurations support M776 and M199 cannons with others in development. The system separates into three subsystems for transportability, requires approximately four hours for installation, complies with highway standards in the U.S. and Europe, and fits within a standard 40-foot ISO container. The system includes contracts for spare parts and is engineered for ease of maintenance. The U.S. Government is primed to produce and support additional units and intends to standardize the PGS as the common interoperability platform for all ammunition and cannon validation both within the continental United States and overseas. Point of contact is Joseph Leone at 973-724-5573 or joseph.leone.civ@army.mil.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Distribution Statement A Approved for public release. Distribution is unlimited.
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
(U) Artillery Proof Gun Stand Overview
UNCLASSIFIED
Distribution Statement A:
Approved for public release. Distribution is unlimited
PAO Log #197-24
Point of Contact: Joseph Leone : 973-724-5573 : joseph.leone.civ@army.mil
UNCLASSIFIED
DRAFT
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
• (U) The Proof Gun Stand (PGS) is an interoperability platform developed by the USG
• (U) Initial fielded in 2023 / Additional fielding for 2025
• (U) Eliminated the need of using existing weapon systems for testing purposes.
• (U) Mitigates the wear and tear experienced by existing weapon systems.
• (U) PGS is the ideal platform for:
• (U) Ammunition evaluation:
• (U) New / Foreign Ammunition.
• (U) Lot Acceptance Testing.
• (U) Ammunition Interchangeability.
• (U) Enables standardized methodology to yield shareable data.
• (U) Facilitates direct one-to-one comparisons.
• (U) Cannon evaluation:
• (U) Cannon proofing.
• (U) Interior ballistics assessment.
• (U) Interoperability
• (U) Mixing and matching ammunition and cannon
(U) Highlights
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
• (U) Hard Mounted Platform
• (U) Elevation operational range from -2.5° to 72°.
• (U) Traverse operational range 360°.
• (U) Engineered for 30-year service life in harsh environments.
• (U) Adaptable to wide variety of ground conditions and range requirements.
• (U) Modular Gun Mount
• (U) Accepts & fires variable cannon configurations.
• (U) 105mm to 155mm (23-58 caliber length cannon).
• (U) Utilizes “Tube Sleeve” to allow for compatibility with different/various cannons.
• (U) Current configurations for M776 and M199 cannons (others are in development).
• (U) Tube Sleeve interface can accommodate up to a 13-inch (33cm) diameter cannon.
• (U) Recoil system designed to adapt to these variable cannon configurations and firing loads.
• (U) Dedicated cable cutout for enhanced protection and allow for Data Acquisition.
• (U) Streamlined cannon replacement process, ensuring minimal time to safely change cannon.
• (U) Transportability Focused
• (U) Separates into 3 subsystems.
• (U) Straightforward installation (about 4 hours)
• (U) Compliant with permissible highway standards (US and Europe)
• (U) Asset can fit into a standard 40’ ISO Container.
• (U) Maintainability Focused
• (U) Contracts in place for sparing.
• (U) Engineered for ease of maintenance.
(U) System Attributes
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
(U) M776 Integration example
(U) M776 Tube
(U) Tube Sleeve
(U) Integrated Primer Feed Mechanism
(U) Integrated hydraulic Breech Opening / Closing hardware
(U) Hydraulic breech open mechanism (opt)
(M776 cannon)
(U) Range adaptability
(U ) Em bedded videos
(U)
(U)
(U)
(U)
(U)
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
(U) Customer provided input for cannon integration:
• (U) Cannon Interface Control Drawing
• (U) Pressure Versus Time Curves
• (U) Muzzle Brake performance characteristics
• (U) Breech Opening and Closing description (Primary and degraded modes)
• (U) Priming description (Primary and degraded modes)
(U) USG will conduct an engineering study to evaluate the requirements for fit and function and develop a cannon kit
(U) A cannon kit may include:
• (U) Recoil dynamics performance evaluation
• (U) Tube Sleeve Adapters
• (U) Breech opening/closing hardware (as required)
• (U) Manual loading capability (as required)
• (U) Priming capability (as required)
• (U) Tube Porting (recommended): To achieve maximum system benefit, allow standardized data acquisition of internal ballistics suitable for cannons and ammunitions evaluations.
(U) System Integration Requirements
(U )Custom er Inputs
(U )O utcom e
PAO Log #197-24
UNCLASSIFIED
UNCLASSIFIED
• (U) The Proof Gun Stand is an excellent platform for:
• (U) Interoperability testing
• (U) Ammunition evaluation
• (U) Failure investigation
• (U) Cannon system interior ballistic evaluation
• (U) USG looking to standardize the PGS (CONUS and OCONUS)as the common interoperability platform to conduct all ammunition and cannon validation
• (U) USG is primed to produce and support additional PGS.
• (U) PGS is flexible and can adapt to a variety of test range applications.
(U) Key Take Away
Point of Contact: Joseph Leone : 973-724-5573 : joseph.leone.civ@army.mil
| (U) Artillery Proof Gun Stand Overview |
| (U) Highlights |
| (U) System Attributes |
| (U) M776 Integration example |
| (U) System Integration Requirements |
| (U) Key Take Away |
File details come from the government source that posted it. Updated .